,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Grinding machines

          Machinelist: Grinding machines


          Cylindrical Grinding Machine

          used Grinding machines Cylindrical Grinding Machine STUDER S20-2 NC


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4893 · Cylindrical Grinding Machine

          STUDER - S20-2 NC - - 2023 - SIDAC (Touch)

          Technical details
          control SIDAC (Touch) ︱Number of axles 2 St.︱centre height 100 mm︱centre distance 650 mm︱grinding wheel dia. x width 350x32 mm︱grinding wheel hole diameter 127 mm︱grinding wheel turining speeds 1600-2200 U/min︱grinding head - revolution -15/+30 °︱cross slide - travel 170 mm︱workpiece spindle head: ︱turning speed range - stepless 30-1200 U/min︱grinding head swivelling 0-90 Grad︱spindle bore 24 mm︱spindle cone MT 4 ︱tailstock quill taper MT 2 ︱table travel longitudinal 650 mm︱max. angular position of the table 15/30 °︱motor 400 V︱grinding wheel motor 3 PS︱dimensions of the machine ca. 2.0x1.6x1.8 m︱
            control SIDAC (Touch)
            Number of axles 2 St.
            centre height 100 mm
            centre distance 650 mm
            grinding wheel dia. x width 350x32 mm
            grinding wheel hole diameter 127 mm
            grinding wheel turining speeds 1600-2200 U/min
            grinding head - revolution -15/+30 °
            cross slide - travel 170 mm
            turning speed range - stepless 30-1200 U/min
            grinding head swivelling 0-90 Grad
            spindle bore 24 mm
            spindle cone MT 4
            tailstock quill taper MT 2
            table travel longitudinal 650 mm
            max. angular position of the tab. 15/30 °
            motor 400 V
            grinding wheel motor 3 PS
            dimensions of the machine ca. 2.0x1.6x1.8 m


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine STUDER S 32


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6944 · Cylindrical Grinding Machine

          STUDER - S 32 - - 2006 - FANUC 16i-T

          Technical details
          grinding diameter 350 mm︱grinding length 400 mm︱centre height 175 mm︱Control FANUC 16i-T ︱max. workpiece weight between centers 80 kg︱x-axis 300 mm︱z-axis 485 mm︱b-axis 0-30 °︱turning speeds 3200 U/min︱total power requirement 38 kVA︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 4,5x2,0x2,2 m︱
          with charging system Seckler Modulo 5 The machine has produced parts with a precision of 5-6µ.
            grinding diameter 350 mm
            grinding length 400 mm
            centre height 175 mm
            Control FANUC 16i-T
            max. workpiece weight between ce. 80 kg
            x-axis 300 mm
            z-axis 485 mm
            b-axis 0-30 °
            turning speeds 3200 U/min
            total power requirement 38 kVA
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 4,5x2,0x2,2 m
            Description :
            with charging system Seckler Modulo 5

            The machine has produced parts with a precision of 5-6µ.


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine STUDER S40


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-P95 · Cylindrical Grinding Machine

          STUDER - S40 - - 2001 -

          Technical details
          grinding diameter 350 mm︱grinding length 1000 mm︱centre height 175 mm︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Data are from the time of delivery and therefore without guarantee. -B-axis 1° B-axis high-precision additional -C-axis standard with form grinding cycles -T1 500mm grinding wheel diameter -T5 500mm grinding wheel diameter -Tx 300mm grinding wheel diameter -longitudinal positioning touch probe Movomatic C25 -tailstock with fine adjustment -Paper belt filter with magnetic separator Machine has been serviced by ex Studer mechanic. All hydraulic lines to the grinding head replaced Top table regrinded Tailstock seals and wear parts replaced Work headstock seals and wear parts replaced Table geometry produced
            grinding diameter 350 mm
            grinding length 1000 mm
            centre height 175 mm
            Description :
            Data are from the time of delivery and therefore without guarantee.

            -B-axis 1°
            B-axis high-precision additional
            -C-axis standard with form grinding cycles
            -T1 500mm grinding wheel diameter
            -T5 500mm grinding wheel diameter
            -Tx 300mm grinding wheel diameter
            -longitudinal positioning touch probe Movomatic C25
            -tailstock with fine adjustment
            -Paper belt filter with magnetic separator

            Machine has been serviced by ex Studer mechanic.
            All hydraulic lines to the grinding head replaced
            Top table regrinded
            Tailstock seals and wear parts replaced
            Work headstock seals and wear parts replaced
            Table geometry produced



        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine STUDER S 40


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-12074 · Cylindrical Grinding Machine

          STUDER - S 40 - - 1996 - FANUC 16T

          Technical details
          grinding diameter 10- 200 mm︱grinding length 1050 mm︱centre height 175 mm︱Control FANUC 16T ︱max. workpiece weight between centers 120 kg︱x-axis 285 mm︱z-axis 1050 mm︱peripheral speed 1-50 m/sec︱grinding wheel size 400 x 80 x 175 mm︱turning speed range - workpiece spindle 1- 1500 U/min︱total power requirement 20 kVA︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3,5 x 2,4 x 2 m︱
          Machine has Fanuc CNC control 16T.
            grinding diameter 10- 200 mm
            grinding length 1050 mm
            centre height 175 mm
            Control FANUC 16T
            max. workpiece weight between ce. 120 kg
            x-axis 285 mm
            z-axis 1050 mm
            peripheral speed 1-50 m/sec
            grinding wheel size 400 x 80 x 175 mm
            turning speed range - workpiece . 1- 1500 U/min
            total power requirement 20 kVA
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3,5 x 2,4 x 2 m
            Description :
            Machine has Fanuc CNC control 16T.



        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Cylindrical Grinding Machine - Universal

          used Grinding machines Cylindrical Grinding Machine - Universal STUDER S33


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-8282 · Cylindrical Grinding Machine - Universal

          STUDER - S33 - - 2010 -

          Technical details
          grinding diameter 350 mm︱grinding length 650 mm︱centre height 175 mm︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Machine in very good condition run in one shift (20,000 switch-on hours). Available from January 2024 Fanuc 0i-TD control system Centre distance 650mm Centre height 175mm Workpiece table swivelling +8.5° with fine adjustment and pneumatic lift-off Cross axis X travel 285mm Feed rate 0.001-10,000mm/min Direct, linear absolute measuring system, resolution 0.0001mm Longitudinal axis Z Travel 800mm Feed rate 0.001-20,000mm/min Direct, linear absolute measuring system, resolution 0.0001mm H1 wheelhead with B-axis and 1° Hirth serration Three tool positions Swivelling range -15 to +225° Pos T2 - External grinding with grinding discs Ø500x80x203mm Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s Cone 1:10, nominal Ø 63mm Pos T2 - External grinding 30° with grinding discs Ø500x80x203mm Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s Cone 1:10, nominal Ø 63mm Swivelling measuring probe Pos T3 - Internal grinding unit with high frequency grinding spindle Ø120mm Motor spindle Fischer MFM 24'-42'000 rpm, 15kW, mounting HJND 21 with oil-air lubrication and water cooling Dressing device, not controlled, movable in X, with dressing tool holder for 2 dressing tools MK1, height-adjustable Workpiece headstock, mounting cone MK4 Spindle nose Ø 70mm, spindle passage Ø 26mm Manual spindle locking, without monitoring C-axis, accuracy +/- 0.5° Workpiece drive 3kW, speed 1-1,500 rpm Pneumatic lifting Equipment: Dittel S6000 electronic grinding detection system with gauging sensors on both table and headstock Accessories: 2-circuit hydraulics 3nine sanding mist extraction system Automatic paper belt filter Flow feed, pumps and tank 375 litres Water cooling circuit 100 litres for sanding drives Documentation
            grinding diameter 350 mm
            grinding length 650 mm
            centre height 175 mm
            Description :
            Machine in very good condition
            run in one shift (20,000 switch-on hours).

            Available from January 2024

            Fanuc 0i-TD control system


            Centre distance 650mm
            Centre height 175mm
            Workpiece table swivelling +8.5° with fine adjustment and pneumatic lift-off

            Cross axis X travel 285mm
            Feed rate 0.001-10,000mm/min
            Direct, linear absolute measuring system, resolution 0.0001mm

            Longitudinal axis Z Travel 800mm
            Feed rate 0.001-20,000mm/min
            Direct, linear absolute measuring system, resolution 0.0001mm

            H1 wheelhead with B-axis and 1° Hirth serration
            Three tool positions
            Swivelling range -15 to +225°

            Pos T2 - External grinding with grinding discs Ø500x80x203mm
            Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s
            Cone 1:10, nominal Ø 63mm

            Pos T2 - External grinding 30° with grinding discs Ø500x80x203mm
            Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s
            Cone 1:10, nominal Ø 63mm
            Swivelling measuring probe

            Pos T3 - Internal grinding unit with high frequency grinding spindle Ø120mm
            Motor spindle Fischer MFM 24'-42'000 rpm, 15kW, mounting HJND 21
            with oil-air lubrication and water cooling

            Dressing device, not controlled, movable in X,
            with dressing tool holder for 2 dressing tools MK1, height-adjustable

            Workpiece headstock, mounting cone MK4
            Spindle nose Ø 70mm, spindle passage Ø 26mm
            Manual spindle locking, without monitoring
            C-axis, accuracy +/- 0.5°
            Workpiece drive 3kW, speed 1-1,500 rpm
            Pneumatic lifting


            Equipment:
            Dittel S6000 electronic grinding detection system
            with gauging sensors on both table and headstock


            Accessories:
            2-circuit hydraulics
            3nine sanding mist extraction system
            Automatic paper belt filter Flow feed, pumps and tank 375 litres
            Water cooling circuit 100 litres for sanding drives
            Documentation



        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal STUDER S140


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-10047 · Cylindrical Grinding Machine - Universal

          STUDER - S140 - - 2002 - Siemens 840 D

          Technical details
          grinding diameter 120 mm︱grinding length 110 mm︱centre height 60 mm︱x-axis 300 mm︱internal diameter 100 mm︱grinding depth max 300 mm︱swing diameter 120 mm︱rapid traverse 15 m/min︱z-axis 300 mm︱solution in X-, Y- und Z-axis 0,0001 mm︱spindle turning speed range 0-1000 U/min︱tailstock taper MT 5 ︱control Siemens 840 D ︱grinding diameter max. 120 mm︱grinding wheel diameter 400 mm︱grinding wheel width 32 mm︱grinding wheel hole diameter 127 mm︱grinding wheel speeds 3150 U/min︱total power requirement 56 kW︱weight of the machine ca. 6,3 t︱
          two 120mm internal grinding spindels 60.000 and 90.000 rpm installed DIETTEL M5000 balancing dresser CO2 fire extinguishing cooling with oil granite machine bed OD grinding dia 120 mm OD grinding legth 100 mm simultanious ID - OD operation X2 = OD travel X1 = IDtravel
            grinding diameter 120 mm
            grinding length 110 mm
            centre height 60 mm
            x-axis 300 mm
            internal diameter 100 mm
            grinding depth max 300 mm
            swing diameter 120 mm
            rapid traverse 15 m/min
            z-axis 300 mm
            solution in X-, Y- und Z-axis 0,0001 mm
            spindle turning speed range 0-1000 U/min
            tailstock taper MT 5
            control Siemens 840 D
            grinding diameter max. 120 mm
            grinding wheel diameter 400 mm
            grinding wheel width 32 mm
            grinding wheel hole diameter 127 mm
            grinding wheel speeds 3150 U/min
            total power requirement 56 kW
            weight of the machine ca. 6,3 t
            Description :
            two 120mm internal grinding spindels 60.000 and 90.000 rpm installed
            DIETTEL M5000 balancing
            dresser
            CO2 fire extinguishing
            cooling with oil
            granite machine bed
            OD grinding dia 120 mm
            OD grinding legth 100 mm
            simultanious ID - OD operation
            X2 = OD travel
            X1 = IDtravel


        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal STUDER S30 lean PRO


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24010 · Cylindrical Grinding Machine - Universal

          STUDER - S30 lean PRO - - 1998 - GE Fanuc 16 T

          Technical details
          grinding diameter 350 mm︱grinding length 1000 mm︱centre height 175 mm︱Control GE Fanuc 16 T︱workpiece weight 130 kg︱internal grinding spindle rev.-stepless 60.000 U/min︱total power requirement 22,5 kW︱weight of the machine ca. 5,1 t︱dimensions of the machine ca. 3x2,4x1,85 m︱
            grinding diameter 350 mm
            grinding length 1000 mm
            centre height 175 mm
            Control GE Fanuc 16 T
            workpiece weight 130 kg
            internal grinding spindle rev.-s. 60.000 U/min
            total power requirement 22,5 kW
            weight of the machine ca. 5,1 t
            dimensions of the machine ca. 3x2,4x1,85 m


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal STUDER S20-2


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-P89 · Cylindrical Grinding Machine - Universal

          STUDER - S20-2 - - 1987 -

          Technical details
          grinding diameter 200 mm︱grinding length 400 mm︱centre height 100 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            grinding diameter 200 mm
            grinding length 400 mm
            centre height 100 mm


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal STUDER S30-1


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-8254K · Cylindrical Grinding Machine - Universal

          STUDER - S30-1 - - 1987 -

          Technical details
          grinding diameter 350 mm︱grinding length 650 mm︱centre height 175 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Well-maintained cylindrical grinding machine for internal and external cylindrical grinding - 7072 operating hours - Retrofitted in 2013 with a cooling lubricant belt filter system, capacity 300 L, manufacturer Knoll. - Including machine accessories, e.g. holders, flanges, collet chuck set, etc. - The machine has been serviced regularly, technically and visually in good condition - ready for use!
            grinding diameter 350 mm
            grinding length 650 mm
            centre height 175 mm
            Description :
            - Well-maintained cylindrical grinding machine for internal and external
            cylindrical grinding
            - 7072 operating hours
            - Retrofitted in 2013 with a cooling lubricant belt filter system, capacity 300
            L, manufacturer Knoll.
            - Including machine accessories, e.g. holders, flanges, collet chuck set, etc.
            - The machine has been serviced regularly, technically and visually in good
            condition - ready for use!


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact

          Internal Grinding Machine

          used Grinding machines Internal Grinding Machine STUDER S140


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-10045 · Internal Grinding Machine

          STUDER - S140 - - 2002 - Siemens 840 D

          Technical details
          internal diameter 100 mm︱grinding depth 100 mm︱swing diameter 120 mm︱x-axis 300 mm︱rapid traverse 15 m/min︱z-axis 300 mm︱solution in X-, Y- und Z-axis 0,0001 mm︱spindle turning speed range 0-1000 U/min︱tailstock taper MT 5 ︱control Siemens 840 D ︱total power requirement 56 kW︱weight of the machine ca. 6,3 t︱dimensions of the machine ca. 3,8 x 2,6 x 2,2 m︱
          two 120mm grinding spindels installed 90.000 rpm and 45.000 rpm DIETTEL M5000 balancing dresser CO2 fire extinguishing cooling with oil granite machine bed
            internal diameter 100 mm
            grinding depth 100 mm
            swing diameter 120 mm
            x-axis 300 mm
            rapid traverse 15 m/min
            z-axis 300 mm
            solution in X-, Y- und Z-axis 0,0001 mm
            spindle turning speed range 0-1000 U/min
            tailstock taper MT 5
            control Siemens 840 D
            total power requirement 56 kW
            weight of the machine ca. 6,3 t
            dimensions of the machine ca. 3,8 x 2,6 x 2,2 m
            Description :
            two 120mm grinding spindels installed 90.000 rpm and 45.000 rpm
            DIETTEL M5000 balancing
            dresser
            CO2 fire extinguishing
            cooling with oil
            granite machine bed


        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •