,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Lathes

          Machinelist: Lathes


          Center Lathe

          used Lathes Center Lathe PINACHO SC-250x1000


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09211F · Center Lathe

          PINACHO - SC-250x1000 - - 2017 -

          Technical details
          turning diameter over bed 502 mm︱turning diameter over slide rest 310 mm︱turning length 1000 mm︱centre height 250 mm︱swing diameter over bed slide 440 mm︱bed width 300 mm︱upper slide travel cross 250 mm︱travel of upper support 130 mm︱spindle nose DIN 55026 Form A ︱spindle bore 58 mm︱transmission ratio 3 ︱spindle turning speed - stepless 40-2300 U/min︱tailstock quill taper MT 4 ︱tailstock quill diameter 68 mm︱tailstock quill adjustment 200 mm︱main drive 5,5 kW︱coolant pump 0,1 kW︱turning tool - shaft cross cut 25 x 25 mm︱3-axis digital readout FAGOR Innova 30iT ︱total power requirement ca. 5,8 kW︱
            turning diameter over bed 502 mm
            turning diameter over slide rest 310 mm
            turning length 1000 mm
            centre height 250 mm
            swing diameter over bed slide 440 mm
            bed width 300 mm
            upper slide travel cross 250 mm
            travel of upper support 130 mm
            spindle nose DIN 55026 Form A
            spindle bore 58 mm
            transmission ratio 3
            spindle turning speed - stepless 40-2300 U/min
            tailstock quill taper MT 4
            tailstock quill diameter 68 mm
            tailstock quill adjustment 200 mm
            main drive 5,5 kW
            coolant pump 0,1 kW
            turning tool - shaft cross cut 25 x 25 mm
            3-axis digital readout FAGOR Innova 30iT
            total power requirement ca. 5,8 kW
            Description :



        • Mager & Wedemeyer
        • Europaallee 24a
        • 28309 Bremen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe PINACHO PINACHO SP/165x750


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2014 · Center Lathe

          PINACHO - PINACHO SP/165x750 - - 1999 -

          Technical details
          gebraucht19991676prompt, Zwischenverkauf vSpanien10500 €︱ 1335 mm︱ 750 mm︱ 165 mm︱ 42 mm︱ 175 mm︱ 250 mm︱ DIN55022-5 Nr. 460-2000 (9) 1/min︱ 0.05 - 0.75 mm/U︱ 0.025 - 0.375 mm/U︱ 0.5 - 7.5 mm︱ 60245 mm︱
          3-Jaw chucks Röhm Dm. 300 mm 4-fold steel holder with 4 inserts Chuck protection Cranking length 120 mm Sliding rotary guard with integrated machine lamp Rear chip splashboard Cooling equipment Lead screw and draw screw cover Foot brake User Manual in English COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO
            gebraucht
            1999
            1676
            prompt, Zwischenverkauf v
            Spanien
            10500 €
            1
            335 mm
            750 mm
            165 mm
            42 mm
            175 mm
            250 mm
            DIN55022-5 Nr. 4
            60-2000 (9) 1/min
            0.05 - 0.75 mm/U
            0.025 - 0.375 mm/U
            0.5 - 7.5 mm
            60
            245 mm
            Description :
            3-Jaw chucks Röhm Dm. 300 mm
            4-fold steel holder with 4 inserts
            Chuck protection
            Cranking length 120 mm
            Sliding rotary guard with integrated machine lamp
            Rear chip splashboard
            Cooling equipment
            Lead screw and draw screw cover
            Foot brake
            User Manual in English

            COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Center Lathe PINACHO SC 325


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12215CM · Center Lathe

          PINACHO - SC 325 - - -

          Technical details
          turning diameter over bed 652 mm︱turning diameter over slide rest 450 mm︱bed width 350 mm︱centre height 325 mm︱centre distance 3000 mm︱turning speeds 30-1700 U/min︱spindle bore 80 mm︱quill travel 220 mm︱turning dia. in gap 910 mm︱length of gap 220 mm︱total power requirement 7,5 kW︱weight of the machine ca. 1,85 t︱dimensions of the machine ca. 2600 x 3125 x 1830 mm︱
            turning diameter over bed 652 mm
            turning diameter over slide rest 450 mm
            bed width 350 mm
            centre height 325 mm
            centre distance 3000 mm
            turning speeds 30-1700 U/min
            spindle bore 80 mm
            quill travel 220 mm
            turning dia. in gap 910 mm
            length of gap 220 mm
            total power requirement 7,5 kW
            weight of the machine ca. 1,85 t
            dimensions of the machine ca. 2600 x 3125 x 1830 mm


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact

          CNC Lathe

          used Lathes CNC Lathe PINACHO SMART 8-260


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03593 · CNC Lathe

          PINACHO - SMART 8-260 - - 2012 - FAGOR TC 8060

          Technical details
          turning diameter 530 mm︱turning length 1000 mm︱centre height 250 mm︱greates pass round over bed 530 mm︱swing diameter over bed slide 260 mm︱spindle turning speed range 0 BIS..2500 IN 5 STUFEN U/min︱control FAGOR TC 8060 ︱spindle bore 80 mm︱interface RS 232 ︱total power requirement 17 kW︱weight of the machine ca. 3 t︱space requirements approx. LxWxH 3 x 1,6 x 1,72 m︱
          3-jaw chuck dia=250mm 8 fach revolver swarf tank, coolant tank div. accessories cnc FAGOR TC 8060 TAILSTOCK
            turning diameter 530 mm
            turning length 1000 mm
            centre height 250 mm
            greates pass round over bed 530 mm
            swing diameter over bed slide 260 mm
            spindle turning speed range 0 BIS..2500 IN 5 STUFEN U/min
            control FAGOR TC 8060
            spindle bore 80 mm
            interface RS 232
            total power requirement 17 kW
            weight of the machine ca. 3 t
            space requirements approx. LxWxH 3 x 1,6 x 1,72 m
            Description :
            3-jaw chuck dia=250mm
            8 fach revolver
            swarf tank, coolant tank
            div. accessories
            cnc FAGOR TC 8060
            TAILSTOCK


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe PINACHO S 940 C 260/1625


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6449 · CNC Lathe

          PINACHO - S 940 C 260/1625 - - 1997 - FAGOR 800 TG

          Technical details
          turning diameter 520 mm︱turning length 1625 mm︱control FAGOR 800 TG ︱greates pass round over bed 530 mm︱swing diameter over slide rest 475 mm︱centre height 260 mm︱bed width 350 mm︱main spindle bore 68 mm︱turning speeds 1500 U/min︱rapid traverse 5 m/min︱Drive 10 kW︱total power requirement kW︱weight of the machine ca. 1,87 t︱dimensions of the machine ca. 2,8x1,4x1,8 m︱
            turning diameter 520 mm
            turning length 1625 mm
            control FAGOR 800 TG
            greates pass round over bed 530 mm
            swing diameter over slide rest 475 mm
            centre height 260 mm
            bed width 350 mm
            main spindle bore 68 mm
            turning speeds 1500 U/min
            rapid traverse 5 m/min
            Drive 10 kW
            weight of the machine ca. 1,87 t
            dimensions of the machine ca. 2,8x1,4x1,8 m


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled PINACHO Smart turn 8 225


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03977 · Lathe - cycle-controlled

          PINACHO - Smart turn 8 225 - - 2013 - FAGOR TC 8055

          Technical details
          turning diameter 450 mm︱turning length 1500 mm︱control FAGOR TC 8055︱total power requirement 15 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2.29X1 X 1.2 m︱
          TEACH IN CNC LATHE Pinacho offers the CNC flat bed lathe ST-225. This is a fast and accurate machine up to 450 mm in swing over bed, 1500 mm in distance between centers and 65 mm in spindle bore. 2 or 3 axis parallel lathes combined with Fagor controL. The available power up to 15 kW in addition to the high rotary speed and low vibrations provided by the servomotor and headstock design make the ST-225 an authentic leader in its category.
            turning diameter 450 mm
            turning length 1500 mm
            control FAGOR TC 8055
            total power requirement 15 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2.29X1 X 1.2 m
            Description :
            TEACH IN CNC LATHE
            Pinacho offers the CNC flat bed lathe ST-225. This is a fast and accurate
            machine up to 450 mm in swing over bed, 1500 mm in distance between centers and
            65 mm in spindle bore. 2 or 3 axis parallel lathes combined with Fagor controL.
            The available power up to 15 kW in addition to the high rotary speed and low
            vibrations provided by the servomotor and headstock design make the ST-225 an
            authentic leader in its category.


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled PINACHO SM/200


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1116 · Lathe - cycle-controlled

          PINACHO - SM/200 - - 2001 - Fanuc

          Technical details
          turning diameter 420 mm︱turning length 1200 mm︱control Fanuc ︱bore diameter 60 mm︱
            turning diameter 420 mm
            turning length 1200 mm
            control Fanuc
            bore diameter 60 mm
            Description :



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled PINACHO Mustang 200


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-5197 · Lathe - cycle-controlled

          PINACHO - Mustang 200 - - 2001 - Fagor 8055

          Technical details
          turning diameter 400 mm︱turning length 1000 mm︱control Fagor 8055 ︱total power requirement 11 kW︱weight of the machine ca. 2,2 t︱dimensions of the machine ca. 3,5 x 2 x 2 m︱
            turning diameter 400 mm
            turning length 1000 mm
            control Fagor 8055
            total power requirement 11 kW
            weight of the machine ca. 2,2 t
            dimensions of the machine ca. 3,5 x 2 x 2 m


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact

          lathe-conventional-electronic

          used Lathes lathe-conventional-electronic Pinacho S90-180


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3200045 · lathe-conventional-electronic

          Pinacho - S90-180 - - unbekannt -

          Technical details
          turning diameter 360 mm︱turning length 1000 mm︱swing diameter over bed slide 200 mm︱turning speeds 30 - 2000 U/min︱spindle bore 42 mm︱quill stroke 150 mm︱tailstock quill taper MT 3 ︱total power requirement 2,5 kW︱weight of the machine ca. 850 kg︱dimensions of the machine ca. 2200 x 850 x 140 mm︱
          - 4-jaw chuck Ø160 mm RÖHM - MULTIFIX quick-change holder with 1x insert - movable tailstock - Lathe chuck protection - Chip back wall - Operation manual
            turning diameter 360 mm
            turning length 1000 mm
            swing diameter over bed slide 200 mm
            turning speeds 30 - 2000 U/min
            spindle bore 42 mm
            quill stroke 150 mm
            tailstock quill taper MT 3
            total power requirement 2,5 kW
            weight of the machine ca. 850 kg
            dimensions of the machine ca. 2200 x 850 x 140 mm
            Description :
            - 4-jaw chuck Ø160 mm RÖHM
            - MULTIFIX quick-change holder with 1x insert
            - movable tailstock
            - Lathe chuck protection
            - Chip back wall
            - Operation manual



        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •