,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Planer-Type Milling M-C - Double Column

          Machinelist: Planer-Type Milling M/C - Double Column


          Planer-Type Milling M/C - Double Column

          used Milling machines Planer-Type Milling M/C - Double Column NAMSUN GTM


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20152 · Planer-Type Milling M/C - Double Column

          NAMSUN - GTM - - new - Heidenhain iTNC 530

          Technical details
          x-travel 31000 mm︱y-travel 4310 mm︱z-travel 1500 mm︱column daylight 4000 mm︱Main spindle: ︱turning speed range - main spindle 16000 U/min︱power capacity - main spindel 34 / 44 kW︱tool taper HSK A63 ︱c-axis +/- 360 °︱A-Axis +/- 110 °︱Distance table surface - crossbeam bottom 2570 mm︱work table: ︱table surface area 30000 x 3000 mm︱max. workpiece weight 16 t︱Tool-Presetter: ︱number of toolpositions 120 pos.︱tool taper HSK A63 ︱rapid traverse ( X / Y / Z ) 20 / 20 / 16 m/min︱control Heidenhain iTNC 530 ︱total power requirement - kVA︱
          unused 5 Axis Gantry Machining Center with moving Portal. The direct driving method using a torque motor eliminates precision problems caused by wear over time and by installing encoders on the torque motor side of the A and C axes, the actual turning angle can be accurately controlled equipped with: - CNC control Heidenhain iTNC 530 HSCI & HR 410 - fixed table: 30000 x 3000mm - 2-axis automatic head -- High speed spindle GMN HCS 230 - 16000 -- head pitch precision angle: 0.001 deg. - ATC: 120 tools (HSK A63) - Heidenhain direct linear measuring system - without coolant tank and chip conveyor
            x-travel 31000 mm
            y-travel 4310 mm
            z-travel 1500 mm
            column daylight 4000 mm
            turning speed range - main spind. 16000 U/min
            power capacity - main spindel 34 / 44 kW
            tool taper HSK A63
            c-axis +/- 360 °
            A-Axis +/- 110 °
            Distance table surface - crossbe. 2570 mm
            table surface area 30000 x 3000 mm
            max. workpiece weight 16 t
            number of toolpositions 120 pos.
            tool taper HSK A63
            rapid traverse ( X / Y / Z ) 20 / 20 / 16 m/min
            control Heidenhain iTNC 530
            total power requirement - kVA
            Description :
            unused 5 Axis Gantry Machining Center with moving Portal.
            The direct driving method using a torque motor eliminates precision problems
            caused by wear over time and by installing encoders on the torque motor side of
            the A and C axes, the actual turning angle can be accurately controlled

            equipped with:
            - CNC control Heidenhain iTNC 530 HSCI & HR 410
            - fixed table: 30000 x 3000mm
            - 2-axis automatic head
            -- High speed spindle GMN HCS 230 - 16000
            -- head pitch precision angle: 0.001 deg.
            - ATC: 120 tools (HSK A63)
            - Heidenhain direct linear measuring system
            - without coolant tank and chip conveyor


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WALDRICH COBURG 17-10 FP 225


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09949 · Planer-Type Milling M/C - Double Column

          WALDRICH COBURG - 17-10 FP 225 - - 85/2003 - SIEMENS 840D

          Technical details
          x-travel 6600 mm︱y-travel 3200 mm︱z-travel 1000 mm︱w-axis 1750 mm︱spindle motor 55 kW︱spindle turning speed range 5 - 2000 U/min︱spindle taper ISO 60 ︱spindle diameter in front bearing 170 mm︱table lenght 1 + 2 6400 mm︱table width 2250 mm︱daylight between the side columns 2650 mm︱table load 50 t︱no. of tools in the magazine 60 Stück︱distance spindle nose and table 2500 mm︱control SIEMENS 840D ︱feed range - table 10 - 15000 mm/min︱feeds crossrail-slide horizontal 10 - 10000 mm/min︱feed in w - axe 10 - 2000 mm/min︱total power requirement 85 kW︱weight of the machine ca. 125 t︱
          Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ISO 50, 15 ISO 60) - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90° indexing - hydrostatic table guideways - adjustable crossrail - 2 tables coupled - chip conveyor - coolant device
            x-travel 6600 mm
            y-travel 3200 mm
            z-travel 1000 mm
            w-axis 1750 mm
            spindle motor 55 kW
            spindle turning speed range 5 - 2000 U/min
            spindle taper ISO 60
            spindle diameter in front bearin. 170 mm
            table lenght 1 + 2 6400 mm
            table width 2250 mm
            daylight between the side column. 2650 mm
            table load 50 t
            no. of tools in the magazine 60 Stück
            distance spindle nose and table 2500 mm
            control SIEMENS 840D
            feed range - table 10 - 15000 mm/min
            feeds crossrail-slide horizontal 10 - 10000 mm/min
            feed in w - axe 10 - 2000 mm/min
            total power requirement 85 kW
            weight of the machine ca. 125 t
            Description :
            Machine general overhauled and equipped with SIEMENS 840 D control in 2003

            - new digital motors, drive controllers, measuring systems and switch cabinet
            - tool changer for 60 tools (45 ISO 50, 15 ISO 60)
            - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90°
            indexing
            - hydrostatic table guideways
            - adjustable crossrail
            - 2 tables coupled
            - chip conveyor
            - coolant device


        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column V-TEC SF 2120


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-020027 · Planer-Type Milling M/C - Double Column

          V-TEC - SF 2120 - - 2023 - HEIDENHAIN TNC 640

          Technical details
          2100 mm︱ 2000 mm︱ 800 mm︱ 2000x1800 mm︱ SK 50 DIN 6978110.000 U/min︱ 20/25/26 kW︱ 2100 mm︱ 32
            2100 mm
            2000 mm
            800 mm
            2000x1800 mm
            SK 50 DIN 69781
            10.000 U/min
            20/25/26 kW
            2100 mm
            32


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column V-TEC SF 3123


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-020028 · Planer-Type Milling M/C - Double Column

          V-TEC - SF 3123 - - 2023 - SIEMENS 828D

          Technical details
          3100 mm︱ 2300 mm︱ 800 mm︱ 3000x1500 mm︱ SK 50 DIN 6978110.000 U/min︱ 24/30 kW︱ 1700 mm︱ 40
            3100 mm
            2300 mm
            800 mm
            3000x1500 mm
            SK 50 DIN 69781
            10.000 U/min
            24/30 kW
            1700 mm
            40


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column MAZAK Versatech V-100N / 200


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18602 · Planer-Type Milling M/C - Double Column

          MAZAK - Versatech V-100N / 200 - - 2017 - Mazatrol SmoothX

          Technical details
          x-travel 5000 mm︱y-travel 3600 mm︱z-travel 710 mm︱w-axis 1250 mm︱Main spindle: ︱turning speed range - main spindle 12000 min/-1︱power capacity - main spindel 45 kW︱tool taper HSK ︱work table: ︱table surface area 2100 x 4000 mm︱max. workpiece weight 43 t︱column daylight 2750 mm︱distance table - lower edge spindle 1880 mm︱Tool-Presetter: ︱number of toolpositions 60 pos.︱tool taper HSK ︱feeds: 8000 mm/min︱rapid traverse ( X / Y / Z ) 30/30/30 m/min︱rapid traverse W: 3 m/min︱control Mazatrol SmoothX
          Double-column, 5-Axis simultaneous Machining Center equipped with: - CNC-Control Mazatrol SmoothX - simultaneous 5 Axis Control Function - Relocation Detectro - Chip Conveyor - Hi-Pressure Coolant / Coolant through Spindle 1,5 MPA - Auto Tool Measur. & Break. detection - Scale Feedback System for x,y,z & w-axis - Work Setting Error Compensation - AAC (45kw / HSK) & ATC Tool Magazin 60-fold (HSK) - Synchronized Tapping - Auto Pecking Cycle with load detection - Spindle Shaper-Type Operation - G00 Slope Constant - Mazak Monitoring System B (RMP 600) Power-On Hours: 23.650h Auto-Run-Hours: 11.850h Auto-Cutting-Hours: 8.340h
            x-travel 5000 mm
            y-travel 3600 mm
            z-travel 710 mm
            w-axis 1250 mm
            turning speed range - main spind. 12000 min/-1
            power capacity - main spindel 45 kW
            tool taper HSK
            table surface area 2100 x 4000 mm
            max. workpiece weight 43 t
            column daylight 2750 mm
            distance table - lower edge spin. 1880 mm
            number of toolpositions 60 pos.
            tool taper HSK
            feeds: 8000 mm/min
            rapid traverse ( X / Y / Z ) 30/30/30 m/min
            rapid traverse W: 3 m/min
            control Mazatrol SmoothX
            Description :
            Double-column, 5-Axis simultaneous Machining Center equipped with:
            - CNC-Control Mazatrol SmoothX
            - simultaneous 5 Axis Control Function
            - Relocation Detectro
            - Chip Conveyor
            - Hi-Pressure Coolant / Coolant through Spindle 1,5 MPA
            - Auto Tool Measur. & Break. detection
            - Scale Feedback System for x,y,z & w-axis
            - Work Setting Error Compensation
            - AAC (45kw / HSK) & ATC Tool Magazin 60-fold (HSK)
            - Synchronized Tapping
            - Auto Pecking Cycle with load detection
            - Spindle Shaper-Type Operation
            - G00 Slope Constant
            - Mazak Monitoring System B (RMP 600)

            Power-On Hours: 23.650h
            Auto-Run-Hours: 11.850h
            Auto-Cutting-Hours: 8.340h


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column Bornemann BW 2022


          • Brandner Revalue GmbH
          • Mozartstr. 24
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 928 58 75
            +49 (0) 7309 928 58 74
          • mb@b-rv.de
            www.b-rv.de
          #2011-2401392 · Planer-Type Milling M/C - Double Column

          Bornemann - BW 2022 - - 2016 - Heidenhain iTNC530

          Technical details
          x-travel 2400 mm︱y-travel 1500 mm︱z-travel 810 mm︱Control Heidenhain iTNC530 ︱total power requirement kW︱weight of the machine ca. 7.8 t︱dimensions of the machine ca. m︱
            x-travel 2400 mm
            y-travel 1500 mm
            z-travel 810 mm
            Control Heidenhain iTNC530
            weight of the machine ca. 7.8 t


        • Brandner Revalue GmbH
        • Mozartstr. 24
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column ZIMMERMANN FZ33c


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-130 · Planer-Type Milling M/C - Double Column

          ZIMMERMANN - FZ33c - - 2015 - HEIDENHAIN iTNC530

          Technical details
          x-travel 2500 mm︱y-travel 3000 mm︱z-travel 1250 mm︱Control HEIDENHAIN iTNC530 ︱spindle turning speed range 22000 U/min︱tool change unit 50 -fach︱tool taper HSK 63 A ︱rated capacity kVA︱milling-head swivable +/- 110° ︱c-axis +-300° ︱total power requirement 130 kW︱weight of the machine ca. 60 t︱dimensions of the machine ca. 7,6 x 7,3 x 5,7 m︱
          This ZIMMERMANN FZ33c is in a very good condition as new. The machine can be viewed under power by arrangement only until week 15. be inspected. Description: Technical data of the machine and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° incl. vibration sensor incl. bearing temperature sensor incl. rotary feed-through for inner KM-feed IKZ 5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15" TFT colour display Extraction system Keller Vario P1 Machine room roofing Tool changer 50-fold, chain magazine, behind the machine Chip conveyor, ejection 60° left, front side Renishaw RMP60 measuring probe Blum laser tool measurement "Control NT-Micro Clamping table Length x width x height 2500 x 3250 x 400mm Table load 8000 kg/m² (max. 16000 kg) T-slots, arranged lengthwise 18H12 Distance between T-slots 250 mm Dimensions, weights Space requirement (without peripherals) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection Voltage (three-phase) 400 V Frequency 50 Hz Fuse see installation plan Power requirement see installation plan Compressed air connection (on-site) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine equipment) Linear axis drives Feed speed X-, Y-, Z-axis 60 m/min Axis acceleration X-, Y-, Z-axis up to 5 m/s² Drives rotary axes -VH30 Feed speed A-, C-axis 360 °/s Axis acceleration A-, C-axis 700 °/s² Resolution A-, C-axis 0.0001 Accuracies of linear axes - according to VDI / DGQ 3441 Positioning accuracy X-axis P= 0.026 mm Y-axis P= 0,028 mm Z-axis P= 0,020 mm Repeat accuracy X-axis Ps= 0.015 mm Y-axis Ps= 0,016 mm Z-axis Ps= 0,010 mm Resolution of the measuring systems (interpol) A-, C- axis 0,0001°. Accuracy rotary axes -VH30 Positioning accuracy A-, C- axis P= 12" = 0,0033°. Repeat accuracy A-, C- axis Ps= 8" = 0,0022°. Milling head VH30 2-axis milling head: VH30, Milling spindle Siemens Weiss Spindle power S1 (100% ED) 60kW, spindle speed 22.000 min-1, 95Nm, HSK-A63 Outer dimensions fork head L x W approx. 500 x 600 mm Nominal torque rotary axes control loop A: min. 1200 Nm C: min. 1047 Nm clamped A- and C-axis: 3000 Nm (permanent grease lubrication with automatic relubrication system) Swivel axis - spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Tool clamping Hydraulic Permissible tool weight 4.5 kg (manufacturer's specification) Coolant supply outside and inside Coolant-lubricant supply (emulsion) at the front of the milling spindle with belt filter system Volume 1500 l Pump 1: 40l/min at 20 bar Pump 2: 20l/min at 40 bar, Blowing air at the front of the milling spindle
            x-travel 2500 mm
            y-travel 3000 mm
            z-travel 1250 mm
            Control HEIDENHAIN iTNC530
            spindle turning speed range 22000 U/min
            tool change unit 50 -fach
            tool taper HSK 63 A
            milling-head swivable +/- 110°
            c-axis +-300°
            total power requirement 130 kW
            weight of the machine ca. 60 t
            dimensions of the machine ca. 7,6 x 7,3 x 5,7 m
            Description :
            This ZIMMERMANN FZ33c is in a very good condition as new.
            The machine can be viewed under power by arrangement only until week 15.
            be inspected.

            Description:
            Technical data of the machine and working ranges
            X-axis 2500 mm
            Y-axis 3000 mm
            Z-axis 1250 mm
            A-axis ± 110 °
            C-axis ± 300 °

            incl. vibration sensor
            incl. bearing temperature sensor
            incl. rotary feed-through for inner KM-feed IKZ
            5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15" TFT colour display
            Extraction system Keller Vario P1
            Machine room roofing
            Tool changer 50-fold, chain magazine, behind the machine
            Chip conveyor, ejection 60° left, front side
            Renishaw RMP60 measuring probe
            Blum laser tool measurement "Control NT-Micro

            Clamping table
            Length x width x height 2500 x 3250 x 400mm
            Table load 8000 kg/m² (max. 16000 kg)
            T-slots, arranged lengthwise 18H12
            Distance between T-slots 250 mm

            Dimensions, weights
            Space requirement (without peripherals) approx. 7600 x 7300 x 5650 mm
            Total weight approx. 53500 kg

            Electrical connection
            Voltage (three-phase) 400 V
            Frequency 50 Hz
            Fuse see installation plan
            Power requirement see installation plan

            Compressed air connection (on-site)
            Required air pressure 6 bar
            Average air consumption approx. 15 m³/h (depending on
            machine equipment)

            Linear axis drives
            Feed speed X-, Y-, Z-axis 60 m/min
            Axis acceleration X-, Y-, Z-axis up to 5 m/s²

            Drives rotary axes -VH30
            Feed speed A-, C-axis 360 °/s
            Axis acceleration A-, C-axis 700 °/s²
            Resolution A-, C-axis 0.0001

            Accuracies of linear axes - according to VDI / DGQ 3441
            Positioning accuracy X-axis P= 0.026 mm
            Y-axis P= 0,028 mm
            Z-axis P= 0,020 mm
            Repeat accuracy X-axis Ps= 0.015 mm
            Y-axis Ps= 0,016 mm
            Z-axis Ps= 0,010 mm
            Resolution of the measuring systems (interpol) A-, C- axis 0,0001°.

            Accuracy rotary axes -VH30
            Positioning accuracy A-, C- axis P= 12" = 0,0033°.
            Repeat accuracy A-, C- axis Ps= 8" = 0,0022°.

            Milling head VH30
            2-axis milling head: VH30,
            Milling spindle Siemens Weiss
            Spindle power S1 (100% ED) 60kW,
            spindle speed 22.000 min-1, 95Nm, HSK-A63
            Outer dimensions fork head L x W approx. 500 x 600 mm
            Nominal torque rotary axes control loop A: min. 1200 Nm
            C: min. 1047 Nm
            clamped A- and C-axis: 3000 Nm
            (permanent grease lubrication with automatic relubrication system)
            Swivel axis - spindle nose 326 mm
            Tool holder HSK 63 A
            Tool clamping Spring clamp
            Tool clamping Hydraulic
            Permissible tool weight 4.5 kg (manufacturer's specification)

            Coolant supply outside and inside
            Coolant-lubricant supply (emulsion) at the front of the milling spindle with
            belt filter system
            Volume 1500 l
            Pump 1: 40l/min at 20 bar
            Pump 2: 20l/min at 40 bar,
            Blowing air at the front of the milling spindle



        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column ZAYER TEBAS-5000


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-721 · Planer-Type Milling M/C - Double Column

          ZAYER - TEBAS-5000 - - 2013 - iTNC-530 HSCI

          Technical details
          x-travel 5.000 mm︱y-travel 3.750 mm︱z-travel 1.250 mm︱Control iTNC-530 HSCI ︱table-size 5.200 x 2.200 mm︱distance between columns 3.000 mm︱feeds 50.000 mm︱feeds 30.000 mm/min︱milling head 0.001º/0.001º ︱tool taper DIN 69871 AD 50 ︱number of spindle speeds 6.000 U/min/rpm︱transmission ratio 3 ︱spindle drive 43 kW︱tool change unit 20 - fach ( Vertikal) ︱Internal cooling system 20 bar︱Chip coveyor 2 ︱handwheel HEIDENHAIN HR-520 ︱total power requirement 122,89 kVA︱weight of the machine ca. 33 t︱Measuring system M&H PS 20.41
          Headstocks: Universal Auto Indexing Head 45º 0.001º/0.001º Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 Spindle speed 6.000 rpm Speed ranges 3 Main spindle power 43 kW Direct output head reduction 1:2,29 INCLUDED Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 Spindle speed 2.000 rpm Automatic support for automatic head change (direct exit head) in the upper side of the right column INCLUDED Automatic support for automatic head change (45º head) in the lower side of the right column INCLUDED Tool changer and magazine: Tool change Vertical Magazine positions 20 Max tool diameter with adjacent positions 125 mm. Max tool diam. with adjacent positions free 240 mm. Max tool length 300 mm. Max tool weight 25 kg. Other equipment: Internal 20 Bar and external coolant 2 longitudinal chip conveyors 1 cross chip conveyor Knoll coolant system Integral protecting guards without ceiling ICAL system for head calibration Portable handwheel Part touch probe Water gun to clean parts Lamp under the bridge
            x-travel 5.000 mm
            y-travel 3.750 mm
            z-travel 1.250 mm
            Control iTNC-530 HSCI
            table-size 5.200 x 2.200 mm
            distance between columns 3.000 mm
            feeds 50.000 mm
            feeds 30.000 mm/min
            milling head 0.001º/0.001º
            tool taper DIN 69871 AD 50
            number of spindle speeds 6.000 U/min/rpm
            transmission ratio 3
            spindle drive 43 kW
            tool change unit 20 - fach ( Vertikal)
            Internal cooling system 20 bar
            Chip coveyor 2
            handwheel HEIDENHAIN HR-520
            total power requirement 122,89 kVA
            weight of the machine ca. 33 t
            Measuring system M&H PS 20.41
            Description :
            Headstocks:
            Universal Auto Indexing Head 45º 0.001º/0.001º
            Taper DIN 69871 AD 50
            Spud ISO 7388-2 B 50
            Spindle speed 6.000 rpm
            Speed ranges 3
            Main spindle power 43 kW
            Direct output head reduction 1:2,29 INCLUDED
            Taper DIN 69871 AD 50
            Spud ISO 7388-2 B 50
            Spindle speed 2.000 rpm
            Automatic support for automatic head change (direct exit head) in the upper
            side of the right column INCLUDED
            Automatic support for automatic head change (45º head) in the lower side of the
            right column INCLUDED
            Tool changer and magazine:
            Tool change Vertical
            Magazine positions 20
            Max tool diameter with adjacent positions 125 mm.
            Max tool diam. with adjacent positions free 240 mm.
            Max tool length 300 mm.
            Max tool weight 25 kg.

            Other equipment:
            Internal 20 Bar and external coolant
            2 longitudinal chip conveyors
            1 cross chip conveyor
            Knoll coolant system
            Integral protecting guards without ceiling
            ICAL system for head calibration
            Portable handwheel
            Part touch probe
            Water gun to clean parts
            Lamp under the bridge



        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column AWEA - CNC LP 3016 YF


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-90330 · Planer-Type Milling M/C - Double Column

          AWEA - CNC - LP 3016 YF - - 2011 - Fanuc 18i MB

          Technical details
          x-travel 3000 mm︱y-travel 1600 mm︱z-travel 760 mm︱Control Fanuc 18i MB ︱column daylight 1700 mm︱table surface area 3260x1500 mm︱passage 1000 mm︱table load 10 t︱drive of main spindle 22 kW︱spindle turning speed - stepless 10-6000 U/min︱tool taper ISO 50 ︱rapid travel 20.000 mm/min︱rapid traverse Z-axis 10.000 m/min︱toolpiece magazine: chain magazine 32 Stück︱diameter of tools max. 127/215 mm︱Power connection 60 kVA︱total power requirement kW︱weight of the machine ca. 27 t︱dimensions of the machine ca. 9x4,7x4 m︱
            x-travel 3000 mm
            y-travel 1600 mm
            z-travel 760 mm
            Control Fanuc 18i MB
            column daylight 1700 mm
            table surface area 3260x1500 mm
            passage 1000 mm
            table load 10 t
            drive of main spindle 22 kW
            spindle turning speed - stepless 10-6000 U/min
            tool taper ISO 50
            rapid travel 20.000 mm/min
            rapid traverse Z-axis 10.000 m/min
            toolpiece magazine: chain magazi. 32 Stück
            diameter of tools max. 127/215 mm
            Power connection 60 kVA
            weight of the machine ca. 27 t
            dimensions of the machine ca. 9x4,7x4 m


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column CORREA FP 50-80


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-724 · Planer-Type Milling M/C - Double Column

          CORREA - FP 50-80 - - 2010 - HEIDENHAIN iTNC-530

          Technical details
          x-travel 8.000 mm︱y-travel 3.800 mm︱z-travel 1.250 mm︱Control HEIDENHAIN iTNC-530 ︱table-size 8.500 x 2.500 mm︱distance between columns 3.100 mm︱rapid travel x/y/z 10/12.000 mm/min︱feed 7.000 m/min︱milling head Automatisch Drehung ︱number of spindle speeds 4.000 U/min/rpm︱spindle drive 37 kW︱transmission ratio 2 Stufen︱table weight 35.000 Kg︱distance spindle /table 500-1.750 mm︱dimensions of the machine ca. 19.370 x 5.850 x 5.970 mm︱tool change unit 30 pos.︱max. torque on the spindle 718 Nm︱spindle taper ISO ISO 50︱handwheel ︱dimension 19.370 x 5.850 x 5.970 mm︱
          - 5 AXIS BRIDGE TYPE MILLING MACHINES Max height table to underside bridge 2.100 mm Min/max distance table to spindle 500-1.750 mm Rapid Feed (X Axis) 10.000 mm/min Rapid Feed (Y,Z Axis) 12.000 mm/min Max. Working Feed 7.000 mm/min Automatic head C5 E INCLUDED B-Axis head swivel ± 190º C Axis head rotation ± 360º Spindle taper ISO 50 Spindle speed 4.000 r.p.m. Spindle Torque 718 Nm Portable Handwheel INCLUDED Thermal growth compensation system INCLUDED
            x-travel 8.000 mm
            y-travel 3.800 mm
            z-travel 1.250 mm
            Control HEIDENHAIN iTNC-530
            table-size 8.500 x 2.500 mm
            distance between columns 3.100 mm
            rapid travel x/y/z 10/12.000 mm/min
            feed 7.000 m/min
            milling head Automatisch Drehung
            number of spindle speeds 4.000 U/min/rpm
            spindle drive 37 kW
            transmission ratio 2 Stufen
            table weight 35.000 Kg
            distance spindle /table 500-1.750 mm
            dimensions of the machine ca. 19.370 x 5.850 x 5.970 mm
            tool change unit 30 pos.
            max. torque on the spindle 718 Nm
            spindle taper ISO ISO 50
            dimension 19.370 x 5.850 x 5.970 mm
            Description :
            - 5 AXIS BRIDGE TYPE MILLING MACHINES
            Max height table to underside bridge 2.100 mm
            Min/max distance table to spindle 500-1.750 mm
            Rapid Feed (X Axis) 10.000 mm/min
            Rapid Feed (Y,Z Axis) 12.000 mm/min
            Max. Working Feed 7.000 mm/min
            Automatic head C5 E INCLUDED
            B-Axis head swivel ± 190º
            C Axis head rotation ± 360º
            Spindle taper ISO 50
            Spindle speed 4.000 r.p.m.
            Spindle Torque 718 Nm
            Portable Handwheel INCLUDED
            Thermal growth compensation system INCLUDED





        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column AWEA - CNC SP 3016


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-90331 · Planer-Type Milling M/C - Double Column

          AWEA - CNC - SP 3016 - - 2006 - Fanuc 18i MB

          Technical details
          x-travel 3000 mm︱y-travel 1600 mm︱z-travel 760 mm︱Control Fanuc 18i MB ︱column daylight 1700 mm︱table surface area 3260x1500 mm︱passage 1000 mm︱table load 10 t︱drive of main spindle 22 kW︱spindle turning speed - stepless 10-6000 U/min︱tool taper ISO 50 ︱rapid travel 20.000 mm/min︱rapid traverse Z-axis 10.000 m/min︱toolpiece magazine: chain magazine 32 Stück︱diameter of tools max. 127/215 mm︱Power connection 60 kVA︱total power requirement kW︱weight of the machine ca. 27 t︱dimensions of the machine ca. 9x4,7x4 m︱
            x-travel 3000 mm
            y-travel 1600 mm
            z-travel 760 mm
            Control Fanuc 18i MB
            column daylight 1700 mm
            table surface area 3260x1500 mm
            passage 1000 mm
            table load 10 t
            drive of main spindle 22 kW
            spindle turning speed - stepless 10-6000 U/min
            tool taper ISO 50
            rapid travel 20.000 mm/min
            rapid traverse Z-axis 10.000 m/min
            toolpiece magazine: chain magazi. 32 Stück
            diameter of tools max. 127/215 mm
            Power connection 60 kVA
            weight of the machine ca. 27 t
            dimensions of the machine ca. 9x4,7x4 m


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column NICOLAS CORREA RAPID 50


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-450 · Planer-Type Milling M/C - Double Column

          NICOLAS CORREA - RAPID 50 - - 2005 - FIDIA C20

          Technical details
          x-travel 5000 mm︱y-travel 3100 mm︱z-travel 1200 mm︱Control FIDIA C20 ︱table-size 5000x2000 mm︱T-slots 11 ︱T-slot - width 22 mm︱table weight 30000 Kg︱distance between columns 2800 mm︱feed: x-20000 mm/min︱feed y,z-30000 mm/min︱spindle rate 6000 rpm︱ 32 kW︱taper ISO ISO 50 ︱Tools changer 30 fach/tools︱internal coolant system feed 20 bar︱handwheel ︱weight of the machine ca. 65 t︱dimensions of the machine ca. 15.100x6.200x6.250 mm︱
          -Automatic head UAD II -Tool clamping Hydraulic -Head 2 – Vertical mandril INCLUDED -2 longitudinal chip conveyors -1 cross chip conveyor -Laser tool presetter
            x-travel 5000 mm
            y-travel 3100 mm
            z-travel 1200 mm
            Control FIDIA C20
            table-size 5000x2000 mm
            T-slots 11
            T-slot - width 22 mm
            table weight 30000 Kg
            distance between columns 2800 mm
            feed: x-20000 mm/min
            feed y,z-30000 mm/min
            spindle rate 6000 rpm
            32 kW
            taper ISO ISO 50
            Tools changer 30 fach/tools
            internal coolant system feed 20 bar
            weight of the machine ca. 65 t
            dimensions of the machine ca. 15.100x6.200x6.250 mm
            Description :
            -Automatic head UAD II
            -Tool clamping Hydraulic
            -Head 2 – Vertical mandril INCLUDED
            -2 longitudinal chip conveyors
            -1 cross chip conveyor
            -Laser tool presetter


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WALDRICH-COBURG Valutec


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-151 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - Valutec - - 2005 - SIEMENS 840D

          Technical details
          x-travel 6000 mm︱y-travel 3500 mm︱z-travel 1500 mm︱Control SIEMENS 840D ︱table load 12 t︱height over floor 6300 mm︱table dimension - longitudinal 5000 mm︱table dimension - cross 2500 mm︱no. of tables 2 ︱tool change unit 200 -fach︱weight of tools max. 30 kg︱tool taper HSK A 100 ︱diameter of tools max. 250 mm︱workpiece length 500 mm︱spindle turning speed range 5-6000 U/min︱c-axis -10 bis 370 °︱b-axis 5 bis -95 °︱column daylight 3000 mm︱distance spindle nose and table 1500 mm︱total power requirement kW︱
            x-travel 6000 mm
            y-travel 3500 mm
            z-travel 1500 mm
            Control SIEMENS 840D
            table load 12 t
            height over floor 6300 mm
            table dimension - longitudinal 5000 mm
            table dimension - cross 2500 mm
            no. of tables 2
            tool change unit 200 -fach
            weight of tools max. 30 kg
            tool taper HSK A 100
            diameter of tools max. 250 mm
            workpiece length 500 mm
            spindle turning speed range 5-6000 U/min
            c-axis -10 bis 370 °
            b-axis 5 bis -95 °
            column daylight 3000 mm
            distance spindle nose and table 1500 mm


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column HARTFORD HB 3190 A


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-90333 · Planer-Type Milling M/C - Double Column

          HARTFORD - HB 3190 A - - 2004 - Fanuc 18 M

          Technical details
          x-travel 3000 mm︱y-travel 1970 mm︱z-travel 920 mm︱Control Fanuc 18 M ︱column daylight 2200 mm︱tool taper 50 ︱spindle turning speed - stepless 40-4.000 U/min︱table-size 3100x1830 mm︱toolpiece magazine: chain magazine 40 Stück︱drive of main spindle 22 kW︱total power requirement kW︱weight of the machine ca. 32 t︱dimensions of the machine ca. 9,7x6x4,7 m︱
            x-travel 3000 mm
            y-travel 1970 mm
            z-travel 920 mm
            Control Fanuc 18 M
            column daylight 2200 mm
            tool taper 50
            spindle turning speed - stepless 40-4.000 U/min
            table-size 3100x1830 mm
            toolpiece magazine: chain magazi. 40 Stück
            drive of main spindle 22 kW
            weight of the machine ca. 32 t
            dimensions of the machine ca. 9,7x6x4,7 m


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column CORREA rapid 5


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1110051 · Planer-Type Milling M/C - Double Column

          CORREA - rapid 5 - - 2004 -

          Technical details
          x-travel 5000 mm︱y-travel 3100 mm︱z-travel 1200 mm︱Control ︱total power requirement 20/27 kW︱weight of the machine ca. 65 t︱dimensions of the machine ca. 15x6,2x6 m︱
          Stock number 1110051 Machine type CNC Portal milling machine Make CORREA Rapid type 50 Year of manufacture 2004 Control type HEIDENHAIN Table size (mm) 5000 x 2000 mm X out (mm) 5000 mm Y-off (mm) 3100 mm Z-off (mm) 1200 mm Table load Max 15 ton Speed (RPM) Max 18,000 Tool holder HSK 63 Gesamtleistung(kW) 20/27 Length (mm) 15000 Width (mm) 6200 Height (mm) 6000 Weight 65 ton Additional information Tool changer for 24 tools 5-axis gesteuerd
            x-travel 5000 mm
            y-travel 3100 mm
            z-travel 1200 mm
            total power requirement 20/27 kW
            weight of the machine ca. 65 t
            dimensions of the machine ca. 15x6,2x6 m
            Description :
            Stock number 1110051
            Machine type CNC Portal milling machine
            Make CORREA
            Rapid type 50
            Year of manufacture 2004
            Control type HEIDENHAIN
            Table size (mm) 5000 x 2000 mm
            X out (mm) 5000 mm
            Y-off (mm) 3100 mm
            Z-off (mm) 1200 mm
            Table load Max 15 ton
            Speed (RPM) Max 18,000
            Tool holder HSK 63
            Gesamtleistung(kW) 20/27
            Length (mm) 15000
            Width (mm) 6200
            Height (mm) 6000
            Weight 65 ton


            Additional information

            Tool changer for 24 tools
            5-axis gesteuerd


        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WESTPHAL Techline M 510


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6925 · Planer-Type Milling M/C - Double Column

          WESTPHAL - Techline M 510 - - 2003 - NUM 1060 W

          Technical details
          x-travel 11200 mm︱y-travel 3130 mm︱z-travel 1000 mm︱Control NUM 1060 W ︱A-axis +- 120 °︱c-axis +215/-210 °︱spindle motor 15 kW︱spindle taper HSK-F63 ︱turning speeds 24000 U/min︱table width 1500 mm︱table length 9400 oder 2x3000 mm︱total power requirement kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 14,6x5,0x4,225 m︱
          Use: e.g. for processing aluminum panels, drilling profiles, advertising (signs milling, etc.), mold construction (prototypes) and processing of light steel frames / -beams using HSC milling The vertically arranged high-frequency milling spindle for automatic Tool change is mounted in a fork head on the Z-axis plate. The Spindle can be moved with the fork head in 2 NC axes, in the A axis and the C-axis. The vertical movement is carried out via the Z-axis. Liquid cooling via a cooling unit. Tool magazine: moving plate changer in the potal, outside the Work area Minimum quantity cooling and lubrication system MQL The machine table consists of milled aluminum plates 8 bar compressed air, clean, dry, oil-free, including pressure intensifier 10- 12 bar to express the tool Feed rates in rapid traverse / working step: X-axis: 60 m / min Y-axis: 60 m / min Z-axis: 30 m / min C-axis: 90 ° sec A-axis: 90 ° sec Total weight approx.20,000 kg Base frame approx.12,500 kg Portal with Z-axis approx. 6,500 kg machine hours: 46.312 h
            x-travel 11200 mm
            y-travel 3130 mm
            z-travel 1000 mm
            Control NUM 1060 W
            A-axis +- 120 °
            c-axis +215/-210 °
            spindle motor 15 kW
            spindle taper HSK-F63
            turning speeds 24000 U/min
            table width 1500 mm
            table length 9400 oder 2x3000 mm
            weight of the machine ca. 20 t
            dimensions of the machine ca. 14,6x5,0x4,225 m
            Description :
            Use:
            e.g. for processing aluminum panels, drilling profiles, advertising (signs
            milling, etc.), mold construction (prototypes) and processing of light steel
            frames /
            -beams using HSC milling

            The vertically arranged high-frequency milling spindle for automatic
            Tool change is mounted in a fork head on the Z-axis plate. The
            Spindle can be moved with the fork head in 2 NC axes, in the A axis
            and the C-axis. The vertical movement is carried out via the Z-axis.
            Liquid cooling via a cooling unit.

            Tool magazine: moving plate changer in the potal, outside the
            Work area
            Minimum quantity cooling and lubrication system MQL
            The machine table consists of milled aluminum plates
            8 bar compressed air, clean, dry, oil-free, including pressure intensifier 10-
            12 bar
            to express the tool

            Feed rates in rapid traverse / working step:
            X-axis: 60 m / min
            Y-axis: 60 m / min
            Z-axis: 30 m / min
            C-axis: 90 ° sec
            A-axis: 90 ° sec

            Total weight approx.20,000 kg
            Base frame approx.12,500 kg
            Portal with Z-axis approx. 6,500 kg

            machine hours: 46.312 h


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column MTorres MGP-51350 TT


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-067 · Planer-Type Milling M/C - Double Column

          MTorres - MGP-51350 TT - - 2003 - Siemens 840D

          Technical details
          Number of axles 5 St.︱travel -x axis 13.000 mm︱travel -y axis 4.500 mm︱travel -z axis 1.000 mm︱distance between columns 6.500 mm︱c-axis 190 Gr.︱turning speed range - spindle 30.000 U/min︱Power 20 KW︱no. of workpieces in the magazine 20 Stück︱weight of the machine ca. 70 t︱required space 19,0 x 11,0 x 7,0 m︱
            Number of axles 5 St.
            travel -x axis 13.000 mm
            travel -y axis 4.500 mm
            travel -z axis 1.000 mm
            distance between columns 6.500 mm
            c-axis 190 Gr.
            turning speed range - spindle 30.000 U/min
            Power 20 KW
            no. of workpieces in the magazin. 20 Stück
            weight of the machine ca. 70 t
            required space 19,0 x 11,0 x 7,0 m


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column HEYLIGENSTAEDT Heynumill 2700-PF


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06190 · Planer-Type Milling M/C - Double Column

          HEYLIGENSTAEDT - Heynumill 2700-PF - - 2002/2018 retrofit - Heidenhain TNC 430 M

          Technical details
          x-travel 3000 mm︱y-travel 4000 mm︱z-travel 1500 mm︱Control Heidenhain TNC 430 M ︱total power requirement 120 kVA︱weight of the machine ca. 83,2 t︱dimensions of the machine ca. m︱
          3/5 axes CNC portal milling machine with integrated C-axis and changeable milling heads. The machine had a purchase price of € 1.4 million in 2002. An inspection in the seller's plant under power is possible after previous appointment. Condition: The machine was overhauled in 2018, costs of over € 100.000,-. - Drives of the X-axis renewed - New hydraulic power unit - Complete electrical wiring renewed - Spindle cooling unit new - 2 pieces longitudinal conveyors new - Coolant pump new - Cover complete X-axis new - Bellows Y-axis new - Exchange measuring ruler X-axis - Fork head spindle bearing new Belleville spring assembly new Drive motor A-axis new Spindle cone ground - Overhaul milling gear (2020) Working range Travels X-axis 3000 mm Y-axis 4000 mm Z-axis 1500 mm Max. column passage 2700 mm Max. Distance between work table and spindle nose: Lower edge of ram interface min./max. 660 mm / 2160 mm Workpiece table Length 3000 mm Width 2000 mm Load 4 t/m² T-slots 28 H8 Rapid traverse X-axis 15000 mm/min Y-axis 15000 mm/min Z-axis 15000 mm/min Equipment: CNC control Heidenhain TNC 430 M Milling heads: Straight milling head type FK 120/450 Outside diameter 280 mm Tool holder SK 50 power max. 67 kW max. speed 5000 rpm Coolant supply through the spindle, via adjustable nozzles 1-axis fork-type milling head type FK 100/2D tool holder SK50 power max. 67 kW max. speed 4000 rpm swiveling range A/B axis +105°/-95° Coolant supply via adjustable nozzles Coolant tank 1.000 l Chip conveyor system Change head station Weight specifications: 1 Y-slide 7000 kg 2 ram 10000 kg 3 column 1 8000 kg 4 column 2 8000 kg 5 crossrail 28000 kg 6 Bed/table 20000 kg 7 Hydraulic power unit 1000 kg 8 Cooling unit 1200 kg 9 Coolant tank ??? Total 83200 kg
            x-travel 3000 mm
            y-travel 4000 mm
            z-travel 1500 mm
            Control Heidenhain TNC 430 M
            total power requirement 120 kVA
            weight of the machine ca. 83,2 t
            Description :
            3/5 axes CNC portal milling machine with integrated C-axis
            and changeable milling heads.

            The machine had a purchase price of € 1.4 million in 2002.

            An inspection in the seller's plant under power is possible after
            previous appointment.

            Condition:
            The machine was overhauled in 2018, costs of over € 100.000,-.
            - Drives of the X-axis renewed
            - New hydraulic power unit
            - Complete electrical wiring renewed
            - Spindle cooling unit new
            - 2 pieces longitudinal conveyors new
            - Coolant pump new
            - Cover complete X-axis new
            - Bellows Y-axis new
            - Exchange measuring ruler X-axis
            - Fork head spindle bearing new
            Belleville spring assembly new
            Drive motor A-axis new
            Spindle cone ground
            - Overhaul milling gear (2020)

            Working range
            Travels
            X-axis 3000 mm
            Y-axis 4000 mm
            Z-axis 1500 mm

            Max. column passage 2700 mm

            Max. Distance between work table and spindle nose:
            Lower edge of ram interface min./max. 660 mm / 2160 mm

            Workpiece table
            Length 3000 mm
            Width 2000 mm
            Load 4 t/m²
            T-slots 28 H8

            Rapid traverse
            X-axis 15000 mm/min
            Y-axis 15000 mm/min
            Z-axis 15000 mm/min

            Equipment:
            CNC control Heidenhain TNC 430 M

            Milling heads:

            Straight milling head type FK 120/450
            Outside diameter 280 mm
            Tool holder SK 50
            power max. 67 kW
            max. speed 5000 rpm
            Coolant supply through the spindle, via adjustable nozzles

            1-axis fork-type milling head type FK 100/2D
            tool holder SK50
            power max. 67 kW
            max. speed 4000 rpm
            swiveling range A/B axis +105°/-95°
            Coolant supply via adjustable nozzles

            Coolant tank 1.000 l
            Chip conveyor system
            Change head station

            Weight specifications:
            1 Y-slide 7000 kg
            2 ram 10000 kg
            3 column 1 8000 kg
            4 column 2 8000 kg
            5 crossrail 28000 kg
            6 Bed/table 20000 kg
            7 Hydraulic power unit 1000 kg
            8 Cooling unit 1200 kg
            9 Coolant tank ???
            Total 83200 kg



        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WALDRICH COBURG MULTITEC 2500 AP


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-739597 · Planer-Type Milling M/C - Double Column

          WALDRICH COBURG - MULTITEC 2500 AP - - 2002 - SIEMENS 840 D

          Technical details
          x-travel 4000 mm︱y-travel 3500 mm︱z-travel 1500 mm︱Controls SIEMENS 840 D ︱----------------------------------- ︱WORKING RANGE -MILLING- . ︱ - x-axis traverse 4000 mm︱ - y-axis traverse 3500 mm︱ - z-axis traverse 1500 mm︱ - w-axis traverse 1500 mm︱PORTAL / BRIDGE . ︱ - distance between columns 2500 mm︱TABLE . ︱ - clamping surface (left-right) 3000 mm︱ - clamping surface (front-back) 2000 mm︱ - workpiece load (max) 10000 kg︱WORKING SPINDLE / HEAD . ︱ - spindle type : vertical . ︱ - spindle revolutions (min) 5 /min︱ - spindle revolutions (max) 6000 /min︱
          Technical description : Planer Type Milling Center with tool changing system and one second table plate.
            x-travel 4000 mm
            y-travel 3500 mm
            z-travel 1500 mm
            Controls SIEMENS 840 D
            WORKING RANGE -MILLING- .
            - x-axis traverse 4000 mm
            - y-axis traverse 3500 mm
            - z-axis traverse 1500 mm
            - w-axis traverse 1500 mm
            PORTAL / BRIDGE .
            - distance between columns 2500 mm
            TABLE .
            - clamping surface (left-right. 3000 mm
            - clamping surface (front-back. 2000 mm
            - workpiece load (max) 10000 kg
            WORKING SPINDLE / HEAD .
            - spindle type : vertical .
            - spindle revolutions (min) 5 /min
            - spindle revolutions (max) 6000 /min
            Description :
            Technical description :

            Planer Type Milling Center with tool changing system and one second table plate.




        • Goedicke Werkzeugmaschinenhandels GmbH
        • Heinz-Nixdorf-Str. 2
        • 74172 Neckarsulm
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column ZIMMERMANN FZ 37


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-97 · Planer-Type Milling M/C - Double Column

          ZIMMERMANN - FZ 37 - - 2001 - FIDIA C20

          Technical details
          x-travel 3500 mm︱y-travel 2500 mm︱z-travel 1250 mm︱control FIDIA C20 ︱c-axis +-300 °︱milling-head swivable +/- 110 °︱rapid traverse 20 m/min︱spindle turning speed range 15000 U/min︱tool taper HSK 63A ︱table dimension - longitudinal 3500 mm︱table dimension - cross 2500 mm︱column daylight 3640 mm︱total power requirement kW︱weight of the machine ca. 35 t︱dimensions of the machine ca. 6,4 x 5,9 x 4,8 m︱
          The ZIMMERMANN FZ 37 portal milling machine is in very good condition. can be inspected at the seller's premises by arrangement.
            x-travel 3500 mm
            y-travel 2500 mm
            z-travel 1250 mm
            control FIDIA C20
            c-axis +-300 °
            milling-head swivable +/- 110 °
            rapid traverse 20 m/min
            spindle turning speed range 15000 U/min
            tool taper HSK 63A
            table dimension - longitudinal 3500 mm
            table dimension - cross 2500 mm
            column daylight 3640 mm
            weight of the machine ca. 35 t
            dimensions of the machine ca. 6,4 x 5,9 x 4,8 m
            Description :
            The ZIMMERMANN FZ 37 portal milling machine is in very good condition.
            can be inspected at the seller's premises by arrangement.


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column HANDTMANN NT 300 / 220 T


          • desba TRADING
          • Im Hofgarten 6
          • 61130 Nidderau
          • Deutschland

          • +49 (0)6187 20 30 749
          • info@desba-trading.de
            www.desba-trading.de
          #2072-2053 · Planer-Type Milling M/C - Double Column

          HANDTMANN - NT 300 / 220 T - - 2001 - Fidia C20

          Technical details
          x-travel 4200 mm︱y-travel 2750 mm︱z-travel 1650 mm︱control Fidia C20 ︱total power requirement kW︱weight of the machine ca. 40 t︱dimensions of the machine ca. 9500 x 5900 x 6400 m︱
          • Traverse paths: X axis approx. 4,200mm, Y axis approx. 2,750mm, Z axis approx 1,650mm, °C axis approx. +/-275° and A axis +95° / -120° • Fixture space: approx. 3,000mm x approx. 2,200mm x approx. 980mm • Table size: 3,000mm x 2,200mm with T-slots in a 150mm grid • Table load: 1,000kg / m² table surface • Working and rapid traverse speed: max. 20m/min • Machine dimensions: length approx. 9,500mm (without housing), width approx. 5,900mm, height approx. 6,400mm (Z axis extended) • Weight: approx. 40,000kg • Controller: Fidia C20 • Spindle: HSK 63 from Fischer (Switzerland), 24,000 rpm (grease lubricated) • Spindle hours: 6,939 hours (as of 05/16/22) • Total hours: 76,793 hours (as of 05/16/22) • Tool changer: 2 tool magazines with 30 tool places each, max. Tool weight 4kg, max. tool diameter 80mm or Ø125mm if no two sister tool places, max. tool length 280mm cover plate pneumatic • Cooling: tool spray device with a container of 19.5 l, spray head with adjustable output 0.04 - max. 2.3l/h • Tool control: Blum Laser • Wireless probe: Manufacturer M&H, type 25.10, year of manufacture 2021 • Exchange ball screw X - axis 10.07.2018. • Telescope cover replaced on February 26, 2019 on one side.
            x-travel 4200 mm
            y-travel 2750 mm
            z-travel 1650 mm
            control Fidia C20
            weight of the machine ca. 40 t
            dimensions of the machine ca. 9500 x 5900 x 6400 m
            Description :
            • Traverse paths:
            X axis approx. 4,200mm,
            Y axis approx. 2,750mm,
            Z axis approx 1,650mm,
            °C axis approx. +/-275° and A axis +95° / -120°
            • Fixture space: approx. 3,000mm x approx. 2,200mm x approx. 980mm
            • Table size: 3,000mm x 2,200mm with T-slots in a 150mm grid
            • Table load: 1,000kg / m² table surface
            • Working and rapid traverse speed: max. 20m/min
            • Machine dimensions: length approx. 9,500mm (without housing), width approx.
            5,900mm, height approx. 6,400mm (Z axis extended)
            • Weight: approx. 40,000kg
            • Controller: Fidia C20
            • Spindle: HSK 63 from Fischer (Switzerland), 24,000 rpm (grease
            lubricated)
            • Spindle hours: 6,939 hours (as of 05/16/22)
            • Total hours: 76,793 hours (as of 05/16/22)
            • Tool changer: 2 tool magazines with 30 tool places each, max.
            Tool weight 4kg, max. tool diameter 80mm or Ø125mm if no
            two sister tool places, max. tool length 280mm cover plate
            pneumatic
            • Cooling: tool spray device with a container of 19.5 l, spray head
            with adjustable output 0.04 - max. 2.3l/h
            • Tool control: Blum Laser
            • Wireless probe: Manufacturer M&H, type 25.10, year of manufacture 2021
            • Exchange ball screw X - axis 10.07.2018.
            • Telescope cover replaced on February 26, 2019 on one side.


        • desba TRADING
        • Im Hofgarten 6
        • 61130 Nidderau
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WALDRICH-COBURG MULTITEC 2500 AP


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1901 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - MULTITEC 2500 AP - - 2001 - Siemens Sinumerik 840 D

          Technical details
          x-axis 4000 mm︱y-axis 3500 mm︱z-axis 1500 mm︱w-axis 1500 mm︱Control Siemens Sinumerik 840 D ︱total power requirement 45 kW︱weight of the machine ca. / t︱
          Universal portal milling machine Pallet system: 2-fold traverse paths Pallet carrier longitudinal (X-axis): 4000mm Milling and drilling unit horizontal (Y-axis): 3500mm Spindle slide vertical (Z-axis): 1500mm Transom vertical (W axis): 1500mm Passage width between stands: 2500mm Headroom between pallet and spindle nose: 2500mm adjustment speeds X,Y,Z axis: 0 - 60000 mm/min W axis: 0 - 6000 mm/min Milling and drilling unit: M4 Drive power: 45kW Speed ??range of the milling and drilling spindle 1st stage: 5-1300 rpm 2nd stage: 23-6000 rpm Rated speed: 330 min-1 Max.torque: 1250Nm Cross-section of the spindle slide: 400 x 400 mm pallet system Number of pallets: 3 Clamping dimensions of the pallets: 2000 x 3000mm T-slots converted: 28mm H8 Maximum workpiece weight: 10000kg Pallets are changed: manually using an indoor crane Number of setup stations: 3 main dimension Passage width b between the uprights: 2500mm Passage height h between pallet and spindle nose: 2500mm Total length L of the machine (without pallet system): approx. 10000mm Total width B of the machine (without pallet system): approx. 9770mm Total height H of the machine above ground: approx. 6650mm Accessories and Options - Renishaw probe - Automatic changing system for tools and processing units manipulation - Double gripper for changing tools in the machining units - Double gripper for changing processing units in de milling and drilling unit - Tool weight max. 50kg - Tool collar diameter 97.5 - 125mm - max. weight for processing units 750kg shelf magazine - 4 shelves - 192 stations for tools - 4 stations for machining units - Tool holder ISO 50A according to DIN 69871 - Distance from station to station 140mm - max. tool diameter with occupancy of each station 135mm - max. standard tool diameter 250mm / with direct feed via shuttle 315mm / max. tool length standard: 400mm / when stored in the top row of shelves (16 stations in the shelf): 600 mm - Follow-up care - Main time parallel storage and retrieval or inspiration from Tools and processing units - Loading station with PC for entering, editing and managing tool data - Electrical equipment including motors and connection cables - Protective grille with automatic door to the working area - Operating instructions / documentation - Machine parameters on storage medium
            x-axis 4000 mm
            y-axis 3500 mm
            z-axis 1500 mm
            w-axis 1500 mm
            Control Siemens Sinumerik 840 D
            total power requirement 45 kW
            weight of the machine ca. / t
            Description :
            Universal portal milling machine
            Pallet system: 2-fold

            traverse paths
            Pallet carrier longitudinal (X-axis): 4000mm
            Milling and drilling unit horizontal (Y-axis): 3500mm
            Spindle slide vertical (Z-axis): 1500mm
            Transom vertical (W axis): 1500mm
            Passage width between stands: 2500mm
            Headroom between pallet and spindle nose: 2500mm

            adjustment speeds
            X,Y,Z axis: 0 - 60000 mm/min
            W axis: 0 - 6000 mm/min

            Milling and drilling unit: M4
            Drive power: 45kW

            Speed ??range of the milling and drilling spindle
            1st stage: 5-1300 rpm
            2nd stage: 23-6000 rpm
            Rated speed: 330 min-1

            Max.torque: 1250Nm
            Cross-section of the spindle slide: 400 x 400 mm

            pallet system
            Number of pallets: 3
            Clamping dimensions of the pallets: 2000 x 3000mm
            T-slots converted: 28mm H8
            Maximum workpiece weight: 10000kg
            Pallets are changed: manually using an indoor crane
            Number of setup stations: 3

            main dimension
            Passage width b between the uprights: 2500mm
            Passage height h between pallet and spindle nose: 2500mm
            Total length L of the machine (without pallet system): approx. 10000mm
            Total width B of the machine (without pallet system): approx. 9770mm
            Total height H of the machine above ground: approx. 6650mm

            Accessories and Options
            - Renishaw probe
            - Automatic changing system for tools and processing units
            manipulation
            - Double gripper for changing tools in the machining units
            - Double gripper for changing processing units in de milling and
            drilling unit
            - Tool weight max. 50kg
            - Tool collar diameter 97.5 - 125mm
            - max. weight for processing units 750kg

            shelf magazine
            - 4 shelves
            - 192 stations for tools
            - 4 stations for machining units
            - Tool holder ISO 50A according to DIN 69871
            - Distance from station to station 140mm
            - max. tool diameter with occupancy of each station 135mm
            - max. standard tool diameter 250mm / with direct feed via shuttle
            315mm / max. tool length standard: 400mm / when stored in the top row of shelves
            (16 stations in the shelf): 600 mm
            - Follow-up care - Main time parallel storage and retrieval or inspiration from
            Tools and processing units
            - Loading station with PC for entering, editing and managing tool data
            - Electrical equipment including motors and connection cables
            - Protective grille with automatic door to the working area
            - Operating instructions / documentation
            - Machine parameters on storage medium


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column FOREST-LINE Minumac II S 35 TH/AC


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03295 · Planer-Type Milling M/C - Double Column

          FOREST-LINE - Minumac II S 35 TH/AC - - 2000 - Siemens

          Technical details
          x-travel 6000 mm︱y-travel 3500 mm︱z-travel 1900 mm︱surface area 6000x2500 mm︱control Siemens ︱type 840D ︱Tool changer 40 ︱chip conveyor Richter ︱b-axis +/- 110 °︱c-axis 360° 0︱turning speeds 24000 U/min︱spindle taper: HSK 63︱spindle drive 25 kW︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 6000 mm
            y-travel 3500 mm
            z-travel 1900 mm
            surface area 6000x2500 mm
            control Siemens
            type 840D
            Tool changer 40
            chip conveyor Richter
            b-axis +/- 110 °
            c-axis 360° 0
            turning speeds 24000 U/min
            spindle taper: HSK 63
            spindle drive 25 kW


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column AWEA VP 2012


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-741 · Planer-Type Milling M/C - Double Column

          AWEA - VP 2012 - - 1998 - SIEMENS 810D

          Technical details
          x-travel 2.000 mm︱y-travel 1.200 mm︱z-travel 760 mm︱Control SIEMENS 810D ︱table-size 2.200 x 1.100 mm︱table weight 3.500 Kg︱distance between columns 1.300 mm︱tool adaptor BT 50 ︱rapid traverse X-axis 15.000 m/min︱rapid traverse x,y 12.000 m/min︱number of spindle speeds 5.000 U/min/rpm︱engine output 37 kW︱Tools changer ︱tool magazin: 30 ︱Internal cooling system 20 bar︱coolant tank 1000 l︱handwheel ︱Chip coveyor ︱total power requirement 40 kW︱weight of the machine ca. 16.000 kg︱
            x-travel 2.000 mm
            y-travel 1.200 mm
            z-travel 760 mm
            Control SIEMENS 810D
            table-size 2.200 x 1.100 mm
            table weight 3.500 Kg
            distance between columns 1.300 mm
            tool adaptor BT 50
            rapid traverse X-axis 15.000 m/min
            rapid traverse x,y 12.000 m/min
            number of spindle speeds 5.000 U/min/rpm
            engine output 37 kW
            tool magazin: 30
            Internal cooling system 20 bar
            coolant tank 1000 l
            total power requirement 40 kW
            weight of the machine ca. 16.000 kg


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   


          Find a double column planer-type milling M/C here
          Discover why milling is a popular metalworking technique

          There are a wide variety of milling machines available to industry professionals today. One option is the planing process whereby the milling surface and the workpiece are moved in opposite directions to one another. This is in contrast to the process of shaping where the workpiece remains stationary. A double column planer-type milling M/C can be used to form a variety of materials from wood to heavy metals. Find the best in used machinery at LagerMaschinen your source for quality industrial machines.

          Planer-style milling machines offer many advantages

          Planing is a versatile approach to the machining of solids. Both flat surfaces and notched and grooved surfaces can be produced by a double column planer-type milling M/C. Planing is used mostly for the creating of linear surfaces as opposed to rounded ones. If you're in the market for a double column planer-type milling M/C why not check out the used models available at LagerMaschinen. You can save yourself time and money by shopping here for used machinery.

          LagerMaschinen: making the most of your time and money

          Investing in used machinery is a smart plan for your business. Moreover shopping for used equipment online not only makes the most of your budget but of your valuable time as well. For example you're looking for a double column planer-type milling M/C you can use LagerMaschinen's user-friendly site to browse by model price or location and find the best used machine for your business' needs. For the best selection in metalworking equipment and other industrial machinery check out LagerMaschinen.