Europees netwerk van dealers van voorraadhoudende machines

Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Metal Processing - CNC Lathe

          Machinelijst: CNC-draaibank


          CNC Lathe

          gebruikte draaibanken CNC-draaibank COLCHESTER CNC-2000


          • INTER-PLAST
          • 42-209 Czestochowa

          • +48 343 627 904
            +48 785 198 061
          • iweta@inter-plast.com.pl
            www.inter-plast.com.pl
          #1129-609 · CNC Lathe

          COLCHESTER - CNC-2000 - - unbekannt - CNC FANUC 0-T

          Technical details
          turning diameter 400 mm︱turning length 1200 mm︱control CNC FANUC 0-T ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter 400 mm
            turning length 1200 mm
            control CNC FANUC 0-T
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank DOOSAN i330


          • INTER-PLAST
          • 42-209 Czestochowa

          • +48 343 627 904
            +48 785 198 061
          • iweta@inter-plast.com.pl
            www.inter-plast.com.pl
          #1129-1039 · CNC Lathe

          DOOSAN - i330 - - unbekannt -

          Technical details
          turning diameter 330 mm︱turning length 250 mm︱control ︱total power requirement kW︱weight of the machine ca. 8,5 t︱dimensions of the machine ca. m︱
            turning diameter 330 mm
            turning length 250 mm
            weight of the machine ca. 8,5 t
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank GMW HL 1070 x 2000

          -

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-20313 · CNC Lathe

          GMW - HL 1070 x 2000 - - 2019 - Siemens 828 D

          Technical details
          turning diameter 1070 mm︱turning length 2300 mm︱control Siemens 828 D ︱turning diameter over slide rest 680 mm︱spindle turning speed range 1 - 800 U/min︱longitudinal feeds: 0,001-500 mm/rev︱cross feeds: 0,001-500 mm/rev︱spindle passage 153 mm︱rapid travel - longitudinal/face 10/8 m/min︱switching steps 4 ︱face slide travel 580 mm︱max. workpiece weight between centres 8000 kg︱total power requirement 22/26 kW︱weight of the machine ca. 12,3 t︱dimensions of the machine ca. 6,9 x 2,7 x 2,6 m︱
          NEW MACHINE as a flat bed machine ! Machine with housing (CE conform), Multifix quick tool changing device, chip conveyor, three jaw chuck, steady, cooling arrangement, hydraulic tailstock, machine LED light and 2 electronic hand wheels for X and Z axes. Control Siemens 828 Dl with shop turn.
            turning diameter 1070 mm
            turning length 2300 mm
            control Siemens 828 D
            turning diameter over slide rest 680 mm
            spindle turning speed range 1 - 800 U/min
            longitudinal feeds: 0,001-500 mm/rev
            cross feeds: 0,001-500 mm/rev
            spindle passage 153 mm
            rapid travel - longitudinal/face 10/8 m/min
            switching steps 4
            face slide travel 580 mm
            max. workpiece weight between ce. 8000 kg
            total power requirement 22/26 kW
            weight of the machine ca. 12,3 t
            dimensions of the machine ca. 6,9 x 2,7 x 2,6 m
            Description :
            NEW MACHINE as a flat bed machine ! Machine with housing (CE conform), Multifix
            quick tool changing device, chip conveyor, three jaw chuck, steady, cooling
            arrangement, hydraulic tailstock, machine LED light and 2 electronic hand
            wheels for X and Z axes. Control Siemens 828 Dl with shop turn.
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank PINACHO SE-250


          • Glaub Werkzeugmaschinen GmbH
          • Industriestraße 36
          • 74194 Neuenstadt am Kocher
          • Deutschland

          • +49 (0) 7139 9366 744
            +49 (0) 7139 9365 794
          • service@gwg-maschinen.com
            www.gwg-maschinen.com
          #2029-1070 · CNC Lathe

          PINACHO - SE-250 - - 2019 - -

          Technical details
          turning diameter 502 mm︱turning length - mm︱control -
            turning diameter 502 mm
            turning length - mm
            control -
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank PINACHO ST-225


          • Glaub Werkzeugmaschinen GmbH
          • Industriestraße 36
          • 74194 Neuenstadt am Kocher
          • Deutschland

          • +49 (0) 7139 9366 744
            +49 (0) 7139 9365 794
          • service@gwg-maschinen.com
            www.gwg-maschinen.com
          #2029-1073 · CNC Lathe

          PINACHO - ST-225 - - 2019 - -

          Technical details
          turning diameter - mm︱turning length - mm︱control -
            turning diameter - mm
            turning length - mm
            control -
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank PINACHO SE-200


          • Glaub Werkzeugmaschinen GmbH
          • Industriestraße 36
          • 74194 Neuenstadt am Kocher
          • Deutschland

          • +49 (0) 7139 9366 744
            +49 (0) 7139 9365 794
          • service@gwg-maschinen.com
            www.gwg-maschinen.com
          #2029-1069 · CNC Lathe

          PINACHO - SE-200 - - 2019 - -

          Technical details
          turning diameter - mm︱turning length - mm︱control -
            turning diameter - mm
            turning length - mm
            control -
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank PINACHO SE-325


          • Glaub Werkzeugmaschinen GmbH
          • Industriestraße 36
          • 74194 Neuenstadt am Kocher
          • Deutschland

          • +49 (0) 7139 9366 744
            +49 (0) 7139 9365 794
          • service@gwg-maschinen.com
            www.gwg-maschinen.com
          #2029-1071 · CNC Lathe

          PINACHO - SE-325 - - 2019 - Siemens

          Technical details
          turning diameter - mm︱turning length - mm︱control Siemens
            turning diameter - mm
            turning length - mm
            control Siemens
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank EMCO HT 45 Big Bore


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-100101 · CNC Lathe

          EMCO - HT 45 Big Bore - - 2018 - Siemens 840D-SL

          Technical details
          turning diameter 300 mm︱spindle passage 50,8 mm︱control Siemens 840D-SL ︱Turret 2 ︱turning speed range - spindle 7000 U/min︱Power 15 KW︱Torque 100 Nm︱Tools place 12 fach︱Number of working hours 3.400 h︱weight of the machine ca. 4.200 t︱dimensions of the machine ca. 2650 x 1950 x 1985 mm mm︱
          - Top Load 8-50 - Oil Cooler+Belt Filter
            turning diameter 300 mm
            spindle passage 50,8 mm
            control Siemens 840D-SL
            Turret 2
            turning speed range - spindle 7000 U/min
            Power 15 KW
            Torque 100 Nm
            Tools place 12 fach
            Number of working hours 3.400 h
            weight of the machine ca. 4.200 t
            dimensions of the machine ca. 2650 x 1950 x 1985 mm mm
            Description :
            - Top Load 8-50
            - Oil Cooler+Belt Filter
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank Biglia B465 T2 S

          -

          • Detlef Jahn e. K.
          • Gewerbepark 8
          • 75331 Engelsbrand
          • Deutschland

          • +49 (0)7235 974820
            +49 (0)7235 9748224
          • info@langdreher.de
            www.langdreher.de
          #1092-02762 · CNC Lathe

          Biglia - B465 T2 S - - 2017 - Fanuc 31i-Model B

          Technical details
          turning diameter 71 mm︱turning length 350 mm︱control Fanuc 31i-Model B ︱turning diameter 200 mm︱swing diameter 300 mm︱turning speeds 4000 U/min︱tool turret 2x 12-fach ︱chip conveyor Knoll kW︱coolant tank 450 l︱Number of working hours 12000 h ON/OFF︱total power requirement 26 kW︱weight of the machine ca. 8,1 t︱dimensions of the machine ca. 4,6 x 2,1 x 2,2 m︱fire distinguisher ja/yes ︱parts conveyor ja/yes
          CNC-lathe Biglia B465,4-axes,year 2017,with 2 spindles (without C-axes) and two turrets (without drive), without loading magazine! with large Knoll coolant tank 450 litres, high pressure pump 25bar with coolant filter 90µm, cooling unit and paper band filter Main spindle ASA 6" - 26kW pick-up spindle ASA 5" - 11kW Foot switch for main spindle Probes for tool measurement Turret top and bottom Manual Guide Dialog Programming, 3-D Simulation SBS tool breakage and wear monitoring for 2 turrets Hainbuch Spanntop AXFIX 65-A6 Mini Three-jaw key bar chuck 165/45/A5 Accessories: 20 pieces tool holder for turning, drilling, cut-off
            turning diameter 71 mm
            turning length 350 mm
            control Fanuc 31i-Model B
            turning diameter 200 mm
            swing diameter 300 mm
            turning speeds 4000 U/min
            tool turret 2x 12-fach
            chip conveyor Knoll kW
            coolant tank 450 l
            Number of working hours 12000 h ON/OFF
            total power requirement 26 kW
            weight of the machine ca. 8,1 t
            dimensions of the machine ca. 4,6 x 2,1 x 2,2 m
            fire distinguisher ja/yes
            parts conveyor ja/yes
            Description :
            CNC-lathe Biglia B465,4-axes,year 2017,with 2 spindles (without C-axes) and two
            turrets (without drive), without loading magazine!
            with large Knoll coolant tank 450 litres, high pressure pump 25bar with
            coolant filter 90µm, cooling unit and paper band filter
            Main spindle ASA 6" - 26kW
            pick-up spindle ASA 5" - 11kW
            Foot switch for main spindle
            Probes for tool measurement Turret top and bottom
            Manual Guide Dialog Programming, 3-D Simulation
            SBS tool breakage and wear monitoring for 2 turrets
            Hainbuch Spanntop AXFIX 65-A6 Mini
            Three-jaw key bar chuck 165/45/A5

            Accessories:
            20 pieces tool holder for turning, drilling, cut-off




          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank TORNOS GT 32


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-100108 · CNC Lathe

          TORNOS - GT 32 - - 2017 - Fanuc 31-B

          Technical details
          turning length 200 mm︱spindle passage 32 mm︱linear axis: 6 ︱workpiece 40 pos.︱c-axis 2 ︱Drive tool 7 ︱number of spindle speeds 8.000 U/min/rpm︱Power 8,2 KW︱Torque 26 Nm︱control Fanuc 31-B ︱Working hours 11.900 h︱weight of the machine ca. 3.700 kg︱
            turning length 200 mm
            spindle passage 32 mm
            linear axis: 6
            workpiece 40 pos.
            c-axis 2
            Drive tool 7
            number of spindle speeds 8.000 U/min/rpm
            Power 8,2 KW
            Torque 26 Nm
            control Fanuc 31-B
            Working hours 11.900 h
            weight of the machine ca. 3.700 kg
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank INDEX C 100


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-100103 · CNC Lathe

          INDEX - C 100 - - 2017 - Siemens 840 D

          Technical details
          turning length 400 mm︱spindle passage 42 mm︱number of spindle speeds 7.000 U/min/rpm︱Power 25 KW︱Torque 49 Nm︱control Siemens 840 D ︱Turret 3 ︱Tools place 10 fach︱Number of working hours 7.200 h︱total power requirement 57 kW︱weight of the machine ca. 5,7 t︱dimensions of the machine ca. 5.990 x 1.706 x 2.138 m︱
            turning length 400 mm
            spindle passage 42 mm
            number of spindle speeds 7.000 U/min/rpm
            Power 25 KW
            Torque 49 Nm
            control Siemens 840 D
            Turret 3
            Tools place 10 fach
            Number of working hours 7.200 h
            total power requirement 57 kW
            weight of the machine ca. 5,7 t
            dimensions of the machine ca. 5.990 x 1.706 x 2.138 m
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank CONTUR MSL-500


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-38370 · CNC Lathe

          CONTUR - MSL-500 - - 2017 - HEIDENHAIN CNC PILOT 640

          Technical details
          turning diameter mm︱turning length mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- design principle: inclined bed ︱- number of spindles 1 ︱- number of x/z slides 1 ︱- number of turrets 1 ︱- live positions: no ︱WORKING RANGE TURNING ︱- turning diameter (max) 370 mm︱- bar diameter (max) 74 mm︱- worpiece length max. 700 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 10 /min︱- spindle revolutions (max) 3500 /min︱- drive power S6 40% 27 kW︱X/Z SLIDE ︱- tool fixture: Turret
            - design principle: inclined bed
            - number of spindles 1
            - number of x/z slides 1
            - number of turrets 1
            - live positions: no
            - turning diameter (max) 370 mm
            - bar diameter (max) 74 mm
            - worpiece length max. 700 mm
            - spindle revolutions (min) 10 /min
            - spindle revolutions (max) 3500 /min
            - drive power S6 40% 27 kW
            - tool fixture: Turret
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank SPINNER TC 400.52 MC


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-40712 · CNC Lathe

          SPINNER - TC 400.52 MC - - 2016 - SIEMENS 840 D SL

          Technical details
          turning diameter 280 mm︱turning length 450 mm︱control ︱-------------------------------------------------- ︱WORKING RANGE TURNING ︱- swing diameter (max) 400 mm︱- turning diameter (max) 280 mm︱- worpiece length max. 450 mm︱MAIN SPINDLE ︱- c-axis: yes ︱COUNTER SPINDLE ︱- drive power S6 40% 15 kW︱- drive power S6 40% 19 kW︱- spindle torque S6 40% 96 Nm︱- spindle torque S1 100% 121 Nm︱- c-axis: yes ︱X/Z SLIDE ︱- Z-axis travel 515 mm︱- X-axis travel 200 mm︱TOOL MAGAZINE
          BUILT IN Spindle Servo Turret capable of indexing in 0.15 seconds Live Tools for Drilling and Milling Operations SIEMENS840D SL Programmable Counter Tailstock Stick Drive Connection preparation Mirror Jaw Min.-Max. And special analog cylinder distance sensor that can adjust the Clamping Position from the Screen Menu Rigid casting design Hardened and ground slides to minimize vibration when machining parts Driven tools at all stations High precision C Axis feature Better surface quality Wide variety of machine configurations to suit your workpiece Compact design that takes up less space
            turning diameter 280 mm
            turning length 450 mm
            - swing diameter (max) 400 mm
            - turning diameter (max) 280 mm
            - worpiece length max. 450 mm
            - c-axis: yes
            - drive power S6 40% 15 kW
            - drive power S6 40% 19 kW
            - spindle torque S6 40% 96 Nm
            - spindle torque S1 100% 121 Nm
            - c-axis: yes
            - Z-axis travel 515 mm
            - X-axis travel 200 mm
            Description :
            BUILT IN Spindle
            Servo Turret capable of indexing in 0.15 seconds
            Live Tools for Drilling and Milling Operations
            SIEMENS840D SL
            Programmable Counter Tailstock
            Stick Drive Connection preparation
            Mirror Jaw Min.-Max. And special analog cylinder distance sensor that can adjust the Clamping Position from the Screen Menu
            Rigid casting design
            Hardened and ground slides to minimize vibration when machining parts
            Driven tools at all stations
            High precision C Axis feature
            Better surface quality
            Wide variety of machine configurations to suit your workpiece
            Compact design that takes up less space
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank SPINNER TC 400.52 MC


          • ProdEq Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Austria / Tirol

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@prodeq.at
            www.prodeq.at
          #2034-40712 · CNC Lathe

          SPINNER - TC 400.52 MC - - 2016 - SIEMENS 840 D SL

          Technical details
          turning diameter 280 mm︱turning length 450 mm︱control ︱-------------------------------------------------- ︱WORKING RANGE TURNING ︱- swing diameter (max) 400 mm︱- turning diameter (max) 280 mm︱- worpiece length max. 450 mm︱MAIN SPINDLE ︱- c-axis: yes ︱COUNTER SPINDLE ︱- drive power S6 40% 15 kW︱- drive power S6 40% 19 kW︱- spindle torque S6 40% 96 Nm︱- spindle torque S1 100% 121 Nm︱- c-axis: yes ︱X/Z SLIDE ︱- Z-axis travel 515 mm︱- X-axis travel 200 mm︱TOOL MAGAZINE
          BUILT IN Spindle Servo Turret capable of indexing in 0.15 seconds Live Tools for Drilling and Milling Operations SIEMENS840D SL Programmable Counter Tailstock Stick Drive Connection preparation Mirror Jaw Min.-Max. And special analog cylinder distance sensor that can adjust the Clamping Position from the Screen Menu Rigid casting design Hardened and ground slides to minimize vibration when machining parts Driven tools at all stations High precision C Axis feature Better surface quality Wide variety of machine configurations to suit your workpiece Compact design that takes up less space
            turning diameter 280 mm
            turning length 450 mm
            - swing diameter (max) 400 mm
            - turning diameter (max) 280 mm
            - worpiece length max. 450 mm
            - c-axis: yes
            - drive power S6 40% 15 kW
            - drive power S6 40% 19 kW
            - spindle torque S6 40% 96 Nm
            - spindle torque S1 100% 121 Nm
            - c-axis: yes
            - Z-axis travel 515 mm
            - X-axis travel 200 mm
            Description :
            BUILT IN Spindle
            Servo Turret capable of indexing in 0.15 seconds
            Live Tools for Drilling and Milling Operations
            SIEMENS840D SL
            Programmable Counter Tailstock
            Stick Drive Connection preparation
            Mirror Jaw Min.-Max. And special analog cylinder distance sensor that can adjust the Clamping Position from the Screen Menu
            Rigid casting design
            Hardened and ground slides to minimize vibration when machining parts
            Driven tools at all stations
            High precision C Axis feature
            Better surface quality
            Wide variety of machine configurations to suit your workpiece
            Compact design that takes up less space
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank VICTOR VTURN-A26Y


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-40228 · CNC Lathe

          VICTOR - VTURN-A26Y - - 2016 - FANUC 0I-TF

          Technical details
          turning diameter 380 mm︱turning length mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 1 ︱- number of turrets 1 ︱- live positions: yes ︱WORKING RANGE TURNING ︱- turning diameter (max) 380 mm︱MAIN SPINDLE ︱- c-axis: yes ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 4813 mm︱- space requirements -front/back- 2100 mm︱- total height 1935 mm︱- total weight approx. 9100 kg︱ATTACHMENTS (TURNING) ︱- chip conveyor: yes ︱- European CE standards: yes
          Capacity Swing over bed mm 900 (800 limited by front door) Swing over carriag mm 700 Between centers mm 950 1400 Max. turning dia. mm 381 Std. Turning dia. mm 294.5 Bar capacity mm 75 (opt. 91, 106) Travels X axis stroke mm 190+69.5 Z axis stroke mm 850 1300 B axis stroke mm - (830) - (1280) Y axis stroke mm ±55 Spindle Max. spindle speed rpm 3500 Spindle nose (chuck) in A2-8 (10) Spindle bore mm 86(opt. 105) Bearing inside dia. mm 130(opt. 160) Sub-spindle (B-axis) Max. spindle speed rpm 4500 (opt. 6000) Spindle nose (chuck) in A2-5 (6) Bearing inside diameter mm 90 Spindle bore mm 52 Bar capacity mm 40 Turret No. of tools no. 12 No. of live tools no. 12 (DIN-5480) Tool shank size mm 25 Max. boring bar dia. mm VDI-40 Exchange time (T-T) sec 0.3 Exchange time (including disk up + down) 1.05 (Adjacent) 1.44 (opposite) Milling speed 4000(opt. 6000) Tailstock Quill dia. mm 110 Quill taper MT#5 (opt. MT#4) Quill stroke mm 100 Feedrate Rapid feedrate m/min X/Z: 20/20, Y:10 (B: 15) Cutting feedrate mm/min X/Z=0~1260 Motor Spindle motor kW 15/22 (opt. 37/45 LSB) Sub-spindle motor kW Bil160M-11/18.5 Feed servo motor kW X:4, Z:4, Y: 4, (B:4) Milling motor kW 3.7/5.5(cont./30 min.) Coolant Tank capacity L 360 410 Controller FANUC 0i-TF Machine Power requirement kVA 36 (49) L × W × H (with chip conveyor) mm 4813 x 2100 x 2325 5493 x 2100 x 2325 Net weight kg 7700 (7900)
            turning diameter 380 mm
            turning length mm
            - number of spindles 1
            - number of turrets 1
            - live positions: yes
            - turning diameter (max) 380 mm
            - c-axis: yes
            - space requirements -left/right. 4813 mm
            - space requirements -front/back. 2100 mm
            - total height 1935 mm
            - total weight approx. 9100 kg
            - chip conveyor: yes
            - European CE standards: yes
            Description :
            Capacity Swing over bed mm 900
            (800 limited by front door)
            Swing over carriag mm 700
            Between centers mm 950
            1400
            Max. turning dia. mm 381
            Std. Turning dia. mm 294.5
            Bar capacity mm 75 (opt. 91, 106)
            Travels X axis stroke mm 190+69.5
            Z axis stroke mm 850
            1300
            B axis stroke mm - (830)
            - (1280)
            Y axis stroke mm ±55
            Spindle Max. spindle speed rpm 3500
            Spindle nose (chuck) in A2-8 (10)
            Spindle bore mm 86(opt. 105)
            Bearing inside dia. mm 130(opt. 160)
            Sub-spindle
            (B-axis) Max. spindle speed rpm 4500 (opt. 6000)
            Spindle nose (chuck) in A2-5 (6)
            Bearing inside diameter mm 90
            Spindle bore mm 52
            Bar capacity mm 40
            Turret No. of tools no. 12
            No. of live tools no. 12 (DIN-5480)
            Tool shank size mm 25
            Max. boring bar dia. mm VDI-40
            Exchange time (T-T) sec 0.3
            Exchange time
            (including disk up + down) 1.05 (Adjacent)
            1.44 (opposite)
            Milling speed 4000(opt. 6000)
            Tailstock Quill dia. mm 110
            Quill taper MT#5 (opt. MT#4)
            Quill stroke mm 100
            Feedrate Rapid feedrate m/min X/Z: 20/20, Y:10 (B: 15)
            Cutting feedrate mm/min X/Z=0~1260
            Motor Spindle motor kW 15/22 (opt. 37/45 LSB)
            Sub-spindle motor kW Bil160M-11/18.5
            Feed servo motor kW X:4, Z:4, Y: 4, (B:4)
            Milling motor kW 3.7/5.5(cont./30 min.)
            Coolant Tank capacity L 360
            410
            Controller FANUC 0i-TF
            Machine Power requirement kVA 36 (49)
            L × W × H
            (with chip conveyor) mm 4813 x 2100 x 2325
            5493 x 2100 x 2325
            Net weight kg 7700 (7900)
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank VICTOR VTURN-A26Y


          • ProdEq Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Austria / Tirol

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@prodeq.at
            www.prodeq.at
          #2034-40228 · CNC Lathe

          VICTOR - VTURN-A26Y - - 2016 - FANUC 0I-TF

          Technical details
          turning diameter 380 mm︱turning length mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 1 ︱- number of turrets 1 ︱- live positions: yes ︱WORKING RANGE TURNING ︱- turning diameter (max) 380 mm︱MAIN SPINDLE ︱- c-axis: yes ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 4813 mm︱- space requirements -front/back- 2100 mm︱- total height 1935 mm︱- total weight approx. 9100 kg︱ATTACHMENTS (TURNING) ︱- chip conveyor: yes ︱- European CE standards: yes
          Capacity Swing over bed mm 900 (800 limited by front door) Swing over carriag mm 700 Between centers mm 950 1400 Max. turning dia. mm 381 Std. Turning dia. mm 294.5 Bar capacity mm 75 (opt. 91, 106) Travels X axis stroke mm 190+69.5 Z axis stroke mm 850 1300 B axis stroke mm - (830) - (1280) Y axis stroke mm ±55 Spindle Max. spindle speed rpm 3500 Spindle nose (chuck) in A2-8 (10) Spindle bore mm 86(opt. 105) Bearing inside dia. mm 130(opt. 160) Sub-spindle (B-axis) Max. spindle speed rpm 4500 (opt. 6000) Spindle nose (chuck) in A2-5 (6) Bearing inside diameter mm 90 Spindle bore mm 52 Bar capacity mm 40 Turret No. of tools no. 12 No. of live tools no. 12 (DIN-5480) Tool shank size mm 25 Max. boring bar dia. mm VDI-40 Exchange time (T-T) sec 0.3 Exchange time (including disk up + down) 1.05 (Adjacent) 1.44 (opposite) Milling speed 4000(opt. 6000) Tailstock Quill dia. mm 110 Quill taper MT#5 (opt. MT#4) Quill stroke mm 100 Feedrate Rapid feedrate m/min X/Z: 20/20, Y:10 (B: 15) Cutting feedrate mm/min X/Z=0~1260 Motor Spindle motor kW 15/22 (opt. 37/45 LSB) Sub-spindle motor kW Bil160M-11/18.5 Feed servo motor kW X:4, Z:4, Y: 4, (B:4) Milling motor kW 3.7/5.5(cont./30 min.) Coolant Tank capacity L 360 410 Controller FANUC 0i-TF Machine Power requirement kVA 36 (49) L × W × H (with chip conveyor) mm 4813 x 2100 x 2325 5493 x 2100 x 2325 Net weight kg 7700 (7900)
            turning diameter 380 mm
            turning length mm
            - number of spindles 1
            - number of turrets 1
            - live positions: yes
            - turning diameter (max) 380 mm
            - c-axis: yes
            - space requirements -left/right. 4813 mm
            - space requirements -front/back. 2100 mm
            - total height 1935 mm
            - total weight approx. 9100 kg
            - chip conveyor: yes
            - European CE standards: yes
            Description :
            Capacity Swing over bed mm 900
            (800 limited by front door)
            Swing over carriag mm 700
            Between centers mm 950
            1400
            Max. turning dia. mm 381
            Std. Turning dia. mm 294.5
            Bar capacity mm 75 (opt. 91, 106)
            Travels X axis stroke mm 190+69.5
            Z axis stroke mm 850
            1300
            B axis stroke mm - (830)
            - (1280)
            Y axis stroke mm ±55
            Spindle Max. spindle speed rpm 3500
            Spindle nose (chuck) in A2-8 (10)
            Spindle bore mm 86(opt. 105)
            Bearing inside dia. mm 130(opt. 160)
            Sub-spindle
            (B-axis) Max. spindle speed rpm 4500 (opt. 6000)
            Spindle nose (chuck) in A2-5 (6)
            Bearing inside diameter mm 90
            Spindle bore mm 52
            Bar capacity mm 40
            Turret No. of tools no. 12
            No. of live tools no. 12 (DIN-5480)
            Tool shank size mm 25
            Max. boring bar dia. mm VDI-40
            Exchange time (T-T) sec 0.3
            Exchange time
            (including disk up + down) 1.05 (Adjacent)
            1.44 (opposite)
            Milling speed 4000(opt. 6000)
            Tailstock Quill dia. mm 110
            Quill taper MT#5 (opt. MT#4)
            Quill stroke mm 100
            Feedrate Rapid feedrate m/min X/Z: 20/20, Y:10 (B: 15)
            Cutting feedrate mm/min X/Z=0~1260
            Motor Spindle motor kW 15/22 (opt. 37/45 LSB)
            Sub-spindle motor kW Bil160M-11/18.5
            Feed servo motor kW X:4, Z:4, Y: 4, (B:4)
            Milling motor kW 3.7/5.5(cont./30 min.)
            Coolant Tank capacity L 360
            410
            Controller FANUC 0i-TF
            Machine Power requirement kVA 36 (49)
            L × W × H
            (with chip conveyor) mm 4813 x 2100 x 2325
            5493 x 2100 x 2325
            Net weight kg 7700 (7900)
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank KAMI DKM 1600.5 Zyklon

          -

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-20399 · CNC Lathe

          KAMI - DKM 1600.5 Zyklon - - 2015 - Fanuc 0i TD

          Technical details
          turning diameter 1600 mm︱turning length 5000 mm︱control Fanuc 0i TD ︱turning diameter over slide rest 1240 mm︱spindle turning speed range 3,15 - 315 U/min︱longitudinal feeds: 0 - 6000 mm/min︱cross feeds: 0 - 3000 mm/min︱spindle passage 130 mm︱workpiece weight 10 t︱working lenght 4800 mm︱face slide travel 680 mm︱tailstock quill diameter 220 mm︱quill stroke 300 mm︱tailstock taper MT 6 ︱total power requirement 25 kW︱weight of the machine ca. 17,5 t︱
          Flat bed machine with only 1500 spindle hours! Machine with housing (CE conform), 4 position automatic tool changer, faceplate d=1400 mm, roller steady, fixed steady rest 400 - 800 mm, moving steady with 50 - 250 mm, remote control cable connected and motorized tailstock.Control Fanuc 0i TD. Machine does have diameter extension at faceplate to 1800 mm dia. with 200 mm length.
            turning diameter 1600 mm
            turning length 5000 mm
            control Fanuc 0i TD
            turning diameter over slide rest 1240 mm
            spindle turning speed range 3,15 - 315 U/min
            longitudinal feeds: 0 - 6000 mm/min
            cross feeds: 0 - 3000 mm/min
            spindle passage 130 mm
            workpiece weight 10 t
            working lenght 4800 mm
            face slide travel 680 mm
            tailstock quill diameter 220 mm
            quill stroke 300 mm
            tailstock taper MT 6
            total power requirement 25 kW
            weight of the machine ca. 17,5 t
            Description :
            Flat bed machine with only 1500 spindle hours! Machine with housing (CE
            conform), 4 position automatic tool changer, faceplate d=1400 mm, roller
            steady, fixed steady rest 400 - 800 mm, moving steady with 50 - 250 mm, remote
            control cable connected and motorized tailstock.Control Fanuc 0i TD. Machine
            does have diameter extension at faceplate to 1800 mm dia. with 200 mm length.
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank TORNOS ST 26


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-100109 · CNC Lathe

          TORNOS - ST 26 - - 2015 - Fanuc 31i-B

          Technical details
          turning length 220 mm︱spindle passage 23 mm︱linear axis: 7 ︱c-axis 2 ︱workpiece 37 pos.︱Drive tool 20 ︱number of spindle speeds 10.000 U/min/rpm︱Torque 17 Nm︱output 9,5 kw︱control Fanuc 31i-B ︱operating hours 7.400 h︱weight of the machine ca. 3.500 kg︱
            turning length 220 mm
            spindle passage 23 mm
            linear axis: 7
            c-axis 2
            workpiece 37 pos.
            Drive tool 20
            number of spindle speeds 10.000 U/min/rpm
            Torque 17 Nm
            output 9,5 kw
            control Fanuc 31i-B
            operating hours 7.400 h
            weight of the machine ca. 3.500 kg
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank SPINNER TC300 52 SMCY


          • INTER-PLAST
          • 42-209 Czestochowa

          • +48 343 627 904
            +48 785 198 061
          • iweta@inter-plast.com.pl
            www.inter-plast.com.pl
          #1129-135 · CNC Lathe

          SPINNER - TC300 52 SMCY - - 2015 - CNC SIEMENS 840 D

          Technical details
          turning diameter 300 mm︱turning length 500 mm︱control CNC SIEMENS 840 D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter 300 mm
            turning length 500 mm
            control CNC SIEMENS 840 D
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank SPINNER TC800-85SMCY


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04615 · CNC Lathe

          SPINNER - TC800-85SMCY - - 2015 - Fanuc 32i-TB mit 15" FB

          Technical details
          control Fanuc 32i-TB mit 15" FB ︱Spinner Servo Load 80 - 1500 Shortloader ja ︱condition sehr gut ︱Number of working hours 9.000 h︱rod short loader Spinner ServoLoad 80-1500 ︱bar length 1.500 mm︱bar material dia. 80 mm︱documentation ︱Main spindle passage with chuck Hainbuch 80 mm︱changeable to 3 jaws SMW Autoblok chucks 315 mm︱Counter spindle with chuck Hainbuch chuck ︱pick up 65 mm︱turret (x-stations) 12-fach mit VDI50-Aufnahm ︱each station equipped with driven tools ︱driven tools ︱clamping heads SK80 ︱Self-dismantling + transport by buyer
            control Fanuc 32i-TB mit 15" FB
            Spinner Servo Load 80 - 1500 Sho. ja
            condition sehr gut
            Number of working hours 9.000 h
            rod short loader Spinner ServoLoad 80-1500
            bar length 1.500 mm
            bar material dia. 80 mm
            Main spindle passage with chuck . 80 mm
            changeable to 3 jaws SMW Autoblo. 315 mm
            pick up 65 mm
            turret (x-stations) 12-fach mit VDI50-Aufnahm
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank HAAS ST 30


          • INTER-PLAST
          • 42-209 Czestochowa

          • +48 343 627 904
            +48 785 198 061
          • iweta@inter-plast.com.pl
            www.inter-plast.com.pl
          #1129-207 · CNC Lathe

          HAAS - ST 30 - - 2014 -

          Technical details
          turning diameter 522 mm︱turning length 660 mm︱control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter 522 mm
            turning length 660 mm
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank GEMINIS GHT 7 - 4000


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-1000111 · CNC Lathe

          GEMINIS - GHT 7 - 4000 - - 2013 - SIEMENS 840 D - pdl

          Technical details
          turning diameter 1.600 mm︱turning length 4.000 mm︱control SIEMENS 840 D - pdl ︱turning diameter over cross slideways 1.200 mm︱travel -x axis 800 mm︱rapid traverse X,Z 10.000 mm/min︱spindle turning speed range 0 - 800 U/min︱transmission ratio 4 ︱engine output 68 kW︱spindle nose 55026 - 15 ︱Turret 4-fach-SAUTER ︱spindle passage 160 mm︱total power requirement 90 kW︱weight of the machine ca. 26 t︱dimensions of the machine ca. m︱
          - Turret, Sauter, with 4 stations, 300 x 300 mm - 4 jaw chucks 1400 mm dia. - 1 x steady rest with 4 supports 900 mm diam. - 1 x bezel with 3 supports 500 mm diam. - tailstock - Handwheel - 10 tool holders - chip conveyor
            turning diameter 1.600 mm
            turning length 4.000 mm
            control SIEMENS 840 D - pdl
            turning diameter over cross slid. 1.200 mm
            travel -x axis 800 mm
            rapid traverse X,Z 10.000 mm/min
            spindle turning speed range 0 - 800 U/min
            transmission ratio 4
            engine output 68 kW
            spindle nose 55026 - 15
            Turret 4-fach-SAUTER
            spindle passage 160 mm
            total power requirement 90 kW
            weight of the machine ca. 26 t
            Description :
            - Turret, Sauter, with 4 stations, 300 x 300 mm
            - 4 jaw chucks 1400 mm dia.
            - 1 x steady rest with 4 supports 900 mm diam.
            - 1 x bezel with 3 supports 500 mm diam.
            - tailstock
            - Handwheel
            - 10 tool holders
            - chip conveyor


          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank SPINNER TC 600 MC 65


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02863 · CNC Lathe

          SPINNER - TC 600 MC 65 - - 2013 - 840 D Sinumerik

          Technical details
          turning diameter 500 mm︱turning length 800 mm︱control 840 D Sinumerik︱rapid traverse 15/24 mm/min︱weight of the machine ca. 6 t︱dimensions of the machine ca. 4,2 x 2,0 x 2,1 m︱
          CNC Lathe Spinner TC 600 MC 65 traverse --------------------- X-axis: 220mm Z-axis: 650 mm spindle 4000 RPM -------------------- Max. Speed: 4000 rpm Spindle nose: A6 Bar opening: 65 mm Torque: 175 Nm revolver 12 FACH VDI -------------------- Number of tool stations: 12 Toolholder: VDI 40 Number of rotating tools: 12 Speed: 5,000 rpm Torque 36 Nm LIVE TOOLS BAR FEDER LNS HYDROBAR
            turning diameter 500 mm
            turning length 800 mm
            control 840 D Sinumerik
            rapid traverse 15/24 mm/min
            weight of the machine ca. 6 t
            dimensions of the machine ca. 4,2 x 2,0 x 2,1 m
            Description :
            CNC Lathe Spinner TC 600 MC 65

            traverse
            ---------------------
            X-axis: 220mm
            Z-axis: 650 mm
            spindle 4000 RPM
            --------------------
            Max. Speed: 4000 rpm
            Spindle nose: A6
            Bar opening: 65 mm
            Torque: 175 Nm
            revolver 12 FACH VDI
            --------------------
            Number of tool stations: 12
            Toolholder: VDI 40
            Number of rotating tools: 12
            Speed: 5,000 rpm
            Torque 36 Nm
            LIVE TOOLS
            BAR FEDER LNS HYDROBAR
          Datasheet
          Request / Contact
          gebruikte draaibanken CNC-draaibank MONDIALE BNC 40160 VXL


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-V0136 · CNC Lathe

          MONDIALE - BNC 40160 VXL - - 2012 - Fanuc 4

          Technical details
          turning diameter 1050 mm︱turning length 4000 mm︱control Fanuc 4 ︱turning diameter over slide rest 680 mm︱total power requirement 22/33 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter 1050 mm
            turning length 4000 mm
            control Fanuc 4
            turning diameter over slide rest 680 mm
            total power requirement 22/33 kW
          Datasheet
          Request / Contact

          CNC Lathes provide accuracy for the most important projects.

          CNC Lathes guarantee complete accuracy and uniform results.

          When mass-producing a tool part or complete product absolute accuracy is key. With Computer Numerical Control - CNC - accuracy is now guaranteed and no longer dependent on human control. CNC lathes have replaced conventional lathes in the last few years particularly regarding products where measurements must be absolutely uniform as a matter of safety. Exact specifications and measurements are loaded into the machine as a data file and after a trial run pieces are cut with complete precision while under the supervision of a CNC lathe operator. In this way CNC lathes are guaranteed to last for many years as the heavy physical strain put on normal lathe machines is not the case here. CNC lathes can be extremely expensive when bought new but now with LagerMaschinen you can still outfit your business with a CNC lathe without overstepping your company budget.

          Purchase a used CNC lathe with LagerMaschinen

          LagerMaschinen has developed several features in the last few years designed to optimize your purchasing experience. Its online platform cross-references used machines based on location specifications and price. Communicate with current owners and experts in your field to find the best used CNC lathes for your business needs. Additionally LagerMaschinen's delivery and installation services will save you time money and frustration. LagerMaschinen prides itself on providing a practical and affordable business solution for businesses that need to find reliable used machinery. Find the perfect used CNC lathes today with LagerMaschinen.