,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Boring mills - Machining Centers - Drilling machines

          Machinelist: Boring mills / Machining Centers / Drilling machines


          Pillar Drilling Machine

          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL AZ 34 PSR + Fuessschalter


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100025 · Pillar Drilling Machine

          IBERDRILL - AZ 34 PSR + Fuessschalter - - NEU -

          Technical details
          bore capacity in steel (diameter) 34 mm︱throat 300 mm︱bore stroke 150 mm︱bore capacity in cast iron (diameter) 40 mm︱thread capacity M 27 ︱spindle taper MT 4 ︱spindle speeds: Stufenlos 100 - 2000 U/min︱column diameter 125 mm︱automatic feeds 3 / 0,1 - 0,2 - 1,3 ︱table: 400 x 420 mm︱Drive Keilriemen ︱total power requirement 3 kW︱weight of the machine ca. 360 kg︱dimensions of the machine ca. 2,3 x 0,6x 1,1 m︱
          Column drilling machines - V-belt drive with foot switch - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant device - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking
            bore capacity in steel (diameter. 34 mm
            throat 300 mm
            bore stroke 150 mm
            bore capacity in cast iron (diam. 40 mm
            thread capacity M 27
            spindle taper MT 4
            spindle speeds: Stufenlos 100 - 2000 U/min
            column diameter 125 mm
            automatic feeds 3 / 0,1 - 0,2 - 1,3
            table: 400 x 420 mm
            Drive Keilriemen
            total power requirement 3 kW
            weight of the machine ca. 360 kg
            dimensions of the machine ca. 2,3 x 0,6x 1,1 m
            Description :
            Column drilling machines - V-belt drive with foot switch

            - Drilling machine of circular column feed automaticmechanical
            - Drive by electronic wide V-belt
            - Spindle taper: CM 4
            - Stepless speed adjustment with frequency converter
            - Potentiometer for speed adjustment
            - digital speed display
            - Automatic feed reversal when threading
            - Scale with adjustable drilling depth - automatic tool ejector
            - Push button for EMERGENCY STOP switch for right/left rotation
            - Electronic control integrated in the drill head - integrated coolant device
            - Machine light - height-adjustable chip protection disc with micro switch
            - fixed table
            - CE marking


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL Falken AZ 32


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-1030 · Pillar Drilling Machine

          IBERDRILL - Falken AZ 32 - - NEU -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 300 mm︱bore stroke 150 mm︱ MK 4480 x 480 mm︱ 0,1 - 0,2 mm/U︱ M 22 (St 60)35 mm︱ 80-1170 U/min︱ 1,45 kW︱ 0,34 t︱ 0,8 x 1,0 x 2,0 m︱
          Accesories: -Machine light (built-in) -Coolant device in the foot (built-in)
            bore capacity in steel (diameter. 32 mm
            throat 300 mm
            bore stroke 150 mm
            MK 4
            480 x 480 mm
            0,1 - 0,2 mm/U
            M 22 (St 60)
            35 mm
            80-1170 U/min
            1,45 kW
            0,34 t
            0,8 x 1,0 x 2,0 m
            Description :
            Accesories:
            -Machine light (built-in)
            -Coolant device in the foot (built-in)


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL Tischbohrmaschine EKM - 25


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100026 · Pillar Drilling Machine

          IBERDRILL - Tischbohrmaschine EKM - 25 - - NEU -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat - mm︱bore stroke 120 mm︱ MK 310manuell 245 – 4.100 U/min︱ manuell über Griffkreuz300 x 270 mm︱ 100 mm︱ 250 mm︱ 0,71 / 1,35 kW︱ 0,23 t︱ 700 x 500 x 1400 mm︱
          Bench drilling machine with V-belt drive and moveable intermediate table Max. thread cutting capacity for steel (St 60) M 18 - V-belt drive with 5x stepped pulleys and quick-release device - 10 fixed speeds - manual feed via grip cross - Scale with adjustable drilling depth - automatic tool ejector - Movable intermediate table, fixed drill head - Machine base plate with machined workpiece support surface - integrated machine light - EMERGENCY STOP button - Right/left rotation switch - High/low speed switch - Chip protection device with microswitch monitoring - thermal magnetic motor protection - Switching electronics in the low-voltage range - Color signal gray (RAL 7004) and graphite black (RAL 9011) - CE conformity and marking - Documentation, operation and maintenance manual
            bore capacity in steel (diameter. 25 mm
            throat - mm
            bore stroke 120 mm
            MK 3
            10
            manuell 245 – 4.100 U/min
            manuell über Griffkreuz
            300 x 270 mm
            100 mm
            250 mm
            0,71 / 1,35 kW
            0,23 t
            700 x 500 x 1400 mm
            Description :
            Bench drilling machine with V-belt drive and moveable intermediate table

            Max. thread cutting capacity for steel (St 60) M 18

            - V-belt drive with 5x stepped pulleys and quick-release device
            - 10 fixed speeds
            - manual feed via grip cross
            - Scale with adjustable drilling depth
            - automatic tool ejector
            - Movable intermediate table, fixed drill head
            - Machine base plate with machined workpiece support surface
            - integrated machine light
            - EMERGENCY STOP button
            - Right/left rotation switch
            - High/low speed switch
            - Chip protection device with microswitch monitoring
            - thermal magnetic motor protection
            - Switching electronics in the low-voltage range
            - Color signal gray (RAL 7004) and graphite black (RAL 9011)
            - CE conformity and marking
            - Documentation, operation and maintenance manual


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL AZ 34


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-1915 · Pillar Drilling Machine

          IBERDRILL - AZ 34 - - NEU -

          Technical details
          bore capacity in steel (diameter) 34 mm︱throat 300 mm︱bore stroke 150 mm︱bore capacity in cast iron (diameter) 40 mm︱thread capacity M 27 ︱spindle taper MT 4 ︱spindle speeds: Stufenlos 100 - 2000 U/min︱column diameter 125 mm︱automatic feeds 3 / 0,1 - 0,2 - 1,3 ︱table: 400 x 420 mm︱Drive Keilriemen ︱total power requirement 3 kW︱weight of the machine ca. 360 kg︱dimensions of the machine ca. 2,3 x 0,6x 1,1 m︱
          - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant system - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking
            bore capacity in steel (diameter. 34 mm
            throat 300 mm
            bore stroke 150 mm
            bore capacity in cast iron (diam. 40 mm
            thread capacity M 27
            spindle taper MT 4
            spindle speeds: Stufenlos 100 - 2000 U/min
            column diameter 125 mm
            automatic feeds 3 / 0,1 - 0,2 - 1,3
            table: 400 x 420 mm
            Drive Keilriemen
            total power requirement 3 kW
            weight of the machine ca. 360 kg
            dimensions of the machine ca. 2,3 x 0,6x 1,1 m
            Description :
            - Drilling machine of circular column feed automaticmechanical
            - Drive by electronic wide V-belt
            - Spindle taper: CM 4
            - Stepless speed adjustment with frequency converter
            - Potentiometer for speed adjustment
            - digital speed display
            - Automatic feed reversal when threading
            - Scale with adjustable drilling depth - automatic tool ejector
            - Push button for EMERGENCY STOP switch for right/left rotation
            - Electronic control integrated in the drill head - integrated coolant system
            - Machine light - height-adjustable chip protection disc with micro switch
            - fixed table
            - CE marking


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL BC 50 VE


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100024 · Pillar Drilling Machine

          IBERDRILL - BC 50 VE - - NEU -

          Technical details
          bore capacity in steel (diameter) 50 mm︱bore capacity in cast iron (diameter) 60 mm︱threading cutting capacity: M42 ︱throat 360 mm︱bore stroke 200 mm︱spindle taper MK 4 ︱feed range - spindle 0,1-0,2-0,3-0,4 mm/U︱spindle turning speed range 190 - 1900 U/min︱column diameter 175 mm︱table surface area 550 x 550 mm︱total power requirement 4 kW︱weight of the machine ca. 0,85 t︱dimensions of the machine ca. 2,2 x 0,7 x 1,3 m︱
          - large stepless speed range in 3 stages - mechanical speed adjustment with hand lever (model V) - electronic speed adjustment with frequency converter (model VE) - Front digital speed display - Gear lubrication by automatic oil pump “VE” - Machine base plate with integrated coolant device - Machine light - MGI rotating and tilting table - Advance and automatic retraction with electromagnetic clutch - Front hand wheel for fine adjustment of the manual feed - Scale with adjustable drilling depth - Automatic feed reversal when threading - automatic tool ejector - Electric controls integrated in the drill head - EMERGENCY STOP button - Switch for forward/reverse rotation - Height-adjustable chip protection disc with micro switch - CE marking
            bore capacity in steel (diameter. 50 mm
            bore capacity in cast iron (diam. 60 mm
            threading cutting capacity: M42
            throat 360 mm
            bore stroke 200 mm
            spindle taper MK 4
            feed range - spindle 0,1-0,2-0,3-0,4 mm/U
            spindle turning speed range 190 - 1900 U/min
            column diameter 175 mm
            table surface area 550 x 550 mm
            total power requirement 4 kW
            weight of the machine ca. 0,85 t
            dimensions of the machine ca. 2,2 x 0,7 x 1,3 m
            Description :
            - large stepless speed range in 3 stages
            - mechanical speed adjustment with hand lever (model V)
            - electronic speed adjustment with frequency converter (model VE)
            - Front digital speed display
            - Gear lubrication by automatic oil pump “VE”
            - Machine base plate with integrated coolant device
            - Machine light
            - MGI rotating and tilting table
            - Advance and automatic retraction with electromagnetic clutch
            - Front hand wheel for fine adjustment of the manual feed
            - Scale with adjustable drilling depth
            - Automatic feed reversal when threading
            - automatic tool ejector
            - Electric controls integrated in the drill head
            - EMERGENCY STOP button
            - Switch for forward/reverse rotation
            - Height-adjustable chip protection disc with micro switch
            - CE marking


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL B 60


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100022 · Pillar Drilling Machine

          IBERDRILL - B 60 - - NEU -

          Technical details
          bore capacity in steel (diameter) 60 mm︱bore capacity in cast iron (diameter) 70 mm︱threading cutting capacity: M50 ︱throat 420 mm︱bore stroke 260 mm︱spindle taper MK 5 ︱feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U︱spindle turning speed range 64 - 1210 U/min︱transmission ratio 12 Stufen︱column diameter 220 mm︱table surface area 600 x 600 mm︱total power requirement 4 kW︱weight of the machine ca. 0,82 t︱dimensions of the machine ca. 2,7 x 0,7 x 1,2 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * Inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)
            bore capacity in steel (diameter. 60 mm
            bore capacity in cast iron (diam. 70 mm
            threading cutting capacity: M50
            throat 420 mm
            bore stroke 260 mm
            spindle taper MK 5
            feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U
            spindle turning speed range 64 - 1210 U/min
            transmission ratio 12 Stufen
            column diameter 220 mm
            table surface area 600 x 600 mm
            total power requirement 4 kW
            weight of the machine ca. 0,82 t
            dimensions of the machine ca. 2,7 x 0,7 x 1,2 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark
            * Inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL B 50


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100023 · Pillar Drilling Machine

          IBERDRILL - B 50 - - NEU -

          Technical details
          bore capacity in steel (diameter) 50 mm︱bore capacity in cast iron (diameter) 60 mm︱threading cutting capacity: M36 ︱throat 400 mm︱bore stroke 230 mm︱spindle taper MK 4 ︱feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U︱spindle turning speed range 54 - 1032 U/min︱transmission ratio 12 Stufen︱column diameter 200 mm︱table surface area 550 x 550 mm︱total power requirement 3,0 kW︱weight of the machine ca. 0,72 t︱dimensions of the machine ca. 2,6 x 0,6 x 1,2 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)
            bore capacity in steel (diameter. 50 mm
            bore capacity in cast iron (diam. 60 mm
            threading cutting capacity: M36
            throat 400 mm
            bore stroke 230 mm
            spindle taper MK 4
            feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U
            spindle turning speed range 54 - 1032 U/min
            transmission ratio 12 Stufen
            column diameter 200 mm
            table surface area 550 x 550 mm
            total power requirement 3,0 kW
            weight of the machine ca. 0,72 t
            dimensions of the machine ca. 2,6 x 0,6 x 1,2 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark
            * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL Falken AZ 32


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3100018 · Pillar Drilling Machine

          IBERDRILL - Falken AZ 32 - - 2018 -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 300 mm︱bore stroke 150 mm︱ MK 4480 x 480 mm︱ 0,1 - 0,2 mm/U︱ M 22 (St 60)35 mm︱ 80-1170 U/min︱ 1,45 kW︱ 0,34 t︱ 0,8 x 1,0 x 2,0 m︱
          *Exhibition machine, like NEW* (Machine was not yet in use) Accesories: -Machine light (built-in) -Coolant device in the foot (built-in)
            bore capacity in steel (diameter. 32 mm
            throat 300 mm
            bore stroke 150 mm
            MK 4
            480 x 480 mm
            0,1 - 0,2 mm/U
            M 22 (St 60)
            35 mm
            80-1170 U/min
            1,45 kW
            0,34 t
            0,8 x 1,0 x 2,0 m
            Description :
            *Exhibition machine, like NEW*
            (Machine was not yet in use)

            Accesories:
            -Machine light (built-in)
            -Coolant device in the foot (built-in)


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL B 50


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76223 · Pillar Drilling Machine

          IBERDRILL - B 50 - - -NEU- -

          Technical details
          bore capacity in steel (diameter) 50 mm︱bore capacity in cast iron (diameter) 60 mm︱threading cutting capacity: M36 ︱throat 400 mm︱bore stroke 230 mm︱spindle taper MK 4 ︱feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U︱spindle turning speed range 54 - 1032 U/min︱transmission ratio 12 Stufen︱column diameter 200 mm︱table surface area 550 x 550 mm︱total power requirement 3,0 kW︱weight of the machine ca. 0,72 t︱dimensions of the machine ca. 0,6 x 1,2 x 2,6 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark
            bore capacity in steel (diameter. 50 mm
            bore capacity in cast iron (diam. 60 mm
            threading cutting capacity: M36
            throat 400 mm
            bore stroke 230 mm
            spindle taper MK 4
            feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U
            spindle turning speed range 54 - 1032 U/min
            transmission ratio 12 Stufen
            column diameter 200 mm
            table surface area 550 x 550 mm
            total power requirement 3,0 kW
            weight of the machine ca. 0,72 t
            dimensions of the machine ca. 0,6 x 1,2 x 2,6 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL B 60


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76224 · Pillar Drilling Machine

          IBERDRILL - B 60 - - -NEU- -

          Technical details
          bore capacity in steel (diameter) 60 mm︱bore capacity in cast iron (diameter) 70 mm︱threading cutting capacity: M50 ︱throat 420 mm︱bore stroke 260 mm︱spindle taper MK 5 ︱feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U︱spindle turning speed range 64 - 1210 U/min︱transmission ratio 12 Stufen︱column diameter 220 mm︱table surface area 600 x 600 mm︱total power requirement 4 kW︱weight of the machine ca. 0,82 t︱dimensions of the machine ca. 0,7 x 1,2 x 2,7 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark
            bore capacity in steel (diameter. 60 mm
            bore capacity in cast iron (diam. 70 mm
            threading cutting capacity: M50
            throat 420 mm
            bore stroke 260 mm
            spindle taper MK 5
            feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U
            spindle turning speed range 64 - 1210 U/min
            transmission ratio 12 Stufen
            column diameter 220 mm
            table surface area 600 x 600 mm
            total power requirement 4 kW
            weight of the machine ca. 0,82 t
            dimensions of the machine ca. 0,7 x 1,2 x 2,7 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •