,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Machines available immediately

          Machinelijst: machines zijn onmiddellijk beschikbaar


          used Machines available immediately Plate Bending Machine  - 3 Rolls AKYAPAK 1030 x 70
          Kurt Steiger Werkzeugmaschinen GmbH   Wiesbaden Flachstr. 11 Deutschland

          Kurt Steiger Werkzeugmaschinen GmbH
          AKYAPAK 1030 x 70
          Plate Bending Machine - 3 Rolls

          1998

          sheet width mm
          plate thickness mm
          pre-bending 0
          AKYAPAK - 1030 x 70
          Plate Bending Machine - 3 Rolls
          Request / Contact
          used Machines available immediately Plate Bending Machine -  4 Rolls AKYAPAK AHS 30/86
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK AHS 30/86
          Plate Bending Machine - 4 Rolls

          Neu / New

          sheet width 3100 mm
          plate thickness 100 mm
          pre-bending 86
          AKYAPAK - AHS 30/86
          Plate Bending Machine - 4 Rolls
          Request / Contact
          used Machines available immediately Plate Bending Machine -  4 Rolls AKYAPAK AHS 30/32
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK AHS 30/32
          Plate Bending Machine - 4 Rolls

          Neu / New

          sheet width 3100 mm
          plate thickness 40 mm
          pre-bending 32
          AKYAPAK - AHS 30/32
          Plate Bending Machine - 4 Rolls
          Request / Contact
          used Machines available immediately Plate Bending Machine - 4 Rolls AKYAPAK AHS 30/40
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK AHS 30/40
          Plate Bending Machine - 4 Rolls

          NEU / NEW

          sheet width 3100 mm
          plate thickness 50 mm
          pre-bending 40 mm
          AKYAPAK - AHS 30/40
          Plate Bending Machine - 4 Rolls
          Request / Contact
          used Machines available immediately Section Bender AKYAPAK APK 45
          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  Niederlangen Fresenburger Weg 4 Deutschland

          Heinz Sanders GmbH
          AKYAPAK APK 45
          Section Bender

          NEU

          I - beam section - flat steel 80 x 15 (d600) mm
          I-beam section - upend 60 x 10 (d800) mm
          L-beam 45 x 5 (d600) mm
          AKYAPAK - APK 45
          Section Bender
          Request / Contact
          used Machines available immediately Section Bender AKYAPAK APK 61
          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  Niederlangen Fresenburger Weg 4 Deutschland

          Heinz Sanders GmbH
          AKYAPAK APK 61
          Section Bender

          NEU

          I - beam section - flat steel 80 x 20 (d 1200) mm
          I-beam section - upend 80 x 25 (d 2100) mm
          L-beam 50 x 50 x 6 (d 1000) mm
          AKYAPAK - APK 61
          Section Bender
          Request / Contact
          used Machines available immediately Section Bender AKYAPAK APK 81
          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  Niederlangen Fresenburger Weg 4 Deutschland

          Heinz Sanders GmbH
          AKYAPAK APK 81
          Section Bender

          NEU

          I - beam section - flat steel 120 x 30 (d600) mm
          I-beam section - upend 100 x 20 (d2100) mm
          L-beam 80x80x8 (d2000) mm
          AKYAPAK - APK 81
          Section Bender
          Request / Contact
          used Machines available immediately Section Bender AKYAPAK APK 30
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          AKYAPAK APK 30
          Section Bender

          2007

          I - beam section - flat steel 50 x 10 mm
          I-beam section - upend 80 x 15 mm
          I-beam section - upend 80 x 15 mm
          AKYAPAK - APK 30
          Section Bender
          Request / Contact
          used Machines available immediately Rotary Welding Table AKYAPAK SRH 1000
          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  Niederlangen Fresenburger Weg 4 Deutschland

          Heinz Sanders GmbH
          AKYAPAK SRH 1000
          Rotary Welding Table

          Neu

          table diameter 900 mm
          table load 1.000 kg
          Frontal Loading Center (A) 150 mm
          AKYAPAK - SRH 1000
          Rotary Welding Table
          Request / Contact
          used Machines available immediately Rotary Welding Table - Round Surface AKYAPAK SRP - 5
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK SRP - 5
          Rotary Welding Table - Round Surface

          Neu / New

          table diameter 1525 mm
          table load 5,0 t
          swivelling range 135° deg.
          AKYAPAK - SRP - 5
          Rotary Welding Table - Round Surface
          Request / Contact
          used Machines available immediately Rotary Welding Table - Round Surface AKYAPAK SRH - 7000
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK SRH - 7000
          Rotary Welding Table - Round Surface

          Neu / New

          table diameter 1300 mm
          table load 7,0 t
          swivelling range 0 - 110° deg.
          AKYAPAK - SRH - 7000
          Rotary Welding Table - Round Surface
          Request / Contact
          used Machines available immediately Rotary Welding Table - Round Surface AKYAPAK SRH - 3500
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK SRH - 3500
          Rotary Welding Table - Round Surface

          Neu / New

          table diameter 960 mm
          table load 3,5 t
          swivelling range 0 - 110° deg.
          AKYAPAK - SRH - 3500
          Rotary Welding Table - Round Surface
          Request / Contact
          used Machines available immediately Wide belt sander BÜTFERING VEGA 111-E
          Bort & herkert GmbH   Bretzfeld Ringstraße 43-45 Deutschland

          Bort&Herkert GmbH
          BÜTFERING VEGA 111-E
          Wide belt sander

          1995

          Working width 1100 mm
          Number of sanding units 1 st.
          Workpiece thickness max. 160 mm
          BÜTFERING - VEGA 111-E
          Wide belt sander
          Request / Contact
          used Machines available immediately Mangle KUESTERS,KREFELD 222.65 / 1800
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          KUESTERS,KREFELD 222.65 / 1800
          Mangle

          1987

          Working widths 1800 mm
          Roller width 2000 mm
          Number of rollers 2 Stück
          KUESTERS,KREFELD - 222.65 / 1800
          Mangle
          Request / Contact
          used Machines available immediately Squeezing Mangle KUESTERS,KREFELD 222.65 / 2000
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          KUESTERS,KREFELD 222.65 / 2000
          Squeezing Mangle

          überholt

          Working widths 2000 mm
          Roller width 2200 mm
          Number of rollers 2 Stück
          KUESTERS,KREFELD - 222.65 / 2000
          Squeezing Mangle
          Request / Contact
          used Machines available immediately Dye Padder KUESTERS,KREFELD 222.11 / 2000
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          KUESTERS,KREFELD 222.11 / 2000
          Dye Padder

          Überholt

          Working widths 2000 mm
          Roller width 2200 mm
          Number of rollers 2 x S-Walze Stück
          KUESTERS,KREFELD - 222.11 / 2000
          Dye Padder
          Request / Contact
          used Machines available immediately Finishing Mangle KUESTERS,KREFELD 222.53 / 2400
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          KUESTERS,KREFELD 222.53 / 2400
          Finishing Mangle

          überholt

          Working width 2400 mm
          Roller width 2600 mm
          Number of rollers 2 Stück
          KUESTERS,KREFELD - 222.53 / 2400
          Finishing Mangle
          Request / Contact
          used Machines available immediately Finishing Mangle KUESTERS,KREFELD 222.53 / 2400
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          KUESTERS,KREFELD 222.53 / 2400
          Finishing Mangle

          überholt

          Working width 2400 mm
          Roller width 2600 mm
          Number of rollers 2 Stück
          KUESTERS,KREFELD - 222.53 / 2400
          Finishing Mangle
          Request / Contact
          used Machines available immediately Finishing Mangle KUESTERS,KREFELD 222.53 / 2400
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          KUESTERS,KREFELD 222.53 / 2400
          Finishing Mangle

          überholt

          Working width 2400 mm
          Roller width 2600 mm
          Number of rollers 2 Stück
          KUESTERS,KREFELD - 222.53 / 2400
          Finishing Mangle
          Request / Contact
          used Machines available immediately Finishing Mangle KUESTERS,KREFELD 222.53 / 2400
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          KUESTERS,KREFELD 222.53 / 2400
          Finishing Mangle

          1970

          Working width 2400 mm
          Roller width 2600 mm
          Number of rollers 2 Stück
          KUESTERS,KREFELD - 222.53 / 2400
          Finishing Mangle
          Request / Contact
          used Machines available immediately Liquor application KUESTERS,KREFELD 272.11 - FlexNip
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          KUESTERS,KREFELD 272.11 - FlexNip
          Liquor application

          1998 - unbenutzt

          Working widths 300 mm
          roll surface width 400 mm
          Capacity of dye tub Liter
          KUESTERS,KREFELD - 272.11 - FlexNip
          Liquor application
          Request / Contact
          used Machines available immediately Liquor application KUESTERS,KREFELD 272.11 - FlexNip
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          KUESTERS,KREFELD 272.11 - FlexNip
          Liquor application

          1988 - unbenutzt

          Working widths 3200 mm
          roll surface width 3400 mm
          Capacity of dye tub Flottenhöhe 220mm = 16 Liter
          KUESTERS,KREFELD - 272.11 - FlexNip
          Liquor application
          Request / Contact
          used Machines available immediately Liquor application KUESTERS,KREFELD 271.49 / 1600
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          KUESTERS,KREFELD 271.49 / 1600
          Liquor application

          1985

          Working widths 1600 mm
          roll surface width 2000 mm
          Capacity of dye tub Liter
          KUESTERS,KREFELD - 271.49 / 1600
          Liquor application
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer: