,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Machines available immediately

          Machinelijst: machines zijn onmiddellijk beschikbaar


          used Machines available immediately Upright Drilling Machine GEORG V7
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          GEORG V7
          Upright Drilling Machine

          1979

          taper MK MK5
          round table ja
          weight of the machine ca. 1.200 kg
          GEORG - V7
          Upright Drilling Machine
          Request / Contact
          used Machines available immediately Plate Bending Machine  - 3 Rolls AKYAPAK 1030 x 70
          Kurt Steiger Werkzeugmaschinen GmbH   Wiesbaden Flachstr. 11 Deutschland

          Kurt Steiger Werkzeugmaschinen GmbH
          AKYAPAK 1030 x 70
          Plate Bending Machine - 3 Rolls

          1998

          sheet width mm
          plate thickness mm
          pre-bending 0
          AKYAPAK - 1030 x 70
          Plate Bending Machine - 3 Rolls
          Request / Contact
          used Machines available immediately Plate Bending Machine -  4 Rolls AKYAPAK AHS 30/86
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK AHS 30/86
          Plate Bending Machine - 4 Rolls

          Neu / New

          sheet width 3100 mm
          plate thickness 100 mm
          pre-bending 86
          AKYAPAK - AHS 30/86
          Plate Bending Machine - 4 Rolls
          Request / Contact
          used Machines available immediately Plate Bending Machine -  4 Rolls AKYAPAK AHS 30/32
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK AHS 30/32
          Plate Bending Machine - 4 Rolls

          Neu / New

          sheet width 3100 mm
          plate thickness 40 mm
          pre-bending 32
          AKYAPAK - AHS 30/32
          Plate Bending Machine - 4 Rolls
          Request / Contact
          used Machines available immediately Plate Bending Machine - 4 Rolls AKYAPAK AHS 30/40
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK AHS 30/40
          Plate Bending Machine - 4 Rolls

          NEU / NEW

          sheet width 3100 mm
          plate thickness 50 mm
          pre-bending 40 mm
          AKYAPAK - AHS 30/40
          Plate Bending Machine - 4 Rolls
          Request / Contact
          used Machines available immediately Plate Bending Machine - 4 Rolls AKYAPAK AHS 25/10
          Bästlein Gebrauchtmaschinenhandel GmbH  Günzburg Augsburger Str. 56 Deutschland

          Bästlein
          AKYAPAK AHS 25/10
          Plate Bending Machine - 4 Rolls

          2019

          sheet width 2600 mm
          plate thickness 13 mm
          pre-bending 10 mm
          AKYAPAK - AHS 25/10
          Plate Bending Machine - 4 Rolls
          Request / Contact
          used Machines available immediately Section Bender AKYAPAK APK 61
          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  Niederlangen Fresenburger Weg 4 Deutschland

          Heinz Sanders GmbH
          AKYAPAK APK 61
          Section Bender

          NEU

          I - beam section - flat steel 80 x 20 (d 1200) mm
          I-beam section - upend 80 x 25 (d 2100) mm
          L-beam 50 x 50 x 6 (d 1000) mm
          AKYAPAK - APK 61
          Section Bender
          Request / Contact
          used Machines available immediately Section Bender AKYAPAK APK 81
          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  Niederlangen Fresenburger Weg 4 Deutschland

          Heinz Sanders GmbH
          AKYAPAK APK 81
          Section Bender

          NEU

          I - beam section - flat steel 120 x 30 (d600) mm
          I-beam section - upend 100 x 20 (d2100) mm
          L-beam 80x80x8 (d2000) mm
          AKYAPAK - APK 81
          Section Bender
          Request / Contact
          used Machines available immediately Section Bender AKYAPAK APK 45
          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  Niederlangen Fresenburger Weg 4 Deutschland

          Heinz Sanders GmbH
          AKYAPAK APK 45
          Section Bender

          NEU

          I - beam section - flat steel 80 x 15 (d600) mm
          I-beam section - upend 60 x 10 (d800) mm
          L-beam 45 x 5 (d600) mm
          AKYAPAK - APK 45
          Section Bender
          Request / Contact
          used Machines available immediately Section Bender AKYAPAK APK 30
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          AKYAPAK APK 30
          Section Bender

          2007

          I - beam section - flat steel 50 x 10 mm
          I-beam section - upend 80 x 15 mm
          I-beam section - upend 80 x 15 mm
          AKYAPAK - APK 30
          Section Bender
          Request / Contact
          used Machines available immediately Vessel Turning Unit KRUPS A8
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          KRUPS A8
          Vessel Turning Unit

          1990

          weight max. 8 t
          foot operation ja

          KRUPS - A8
          Vessel Turning Unit
          Request / Contact
          used Machines available immediately Rotary Welding Table AKYAPAK SRH 1000
          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  Niederlangen Fresenburger Weg 4 Deutschland

          Heinz Sanders GmbH
          AKYAPAK SRH 1000
          Rotary Welding Table

          Neu

          table diameter 900 mm
          table load 1.000 kg
          Frontal Loading Center (A) 150 mm
          AKYAPAK - SRH 1000
          Rotary Welding Table
          Request / Contact
          used Machines available immediately Rotary Welding Table - Round Surface AKYAPAK SRP - 5
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK SRP - 5
          Rotary Welding Table - Round Surface

          Neu / New

          table diameter 1525 mm
          table load 5,0 t
          swivelling range 135° deg.
          AKYAPAK - SRP - 5
          Rotary Welding Table - Round Surface
          Request / Contact
          used Machines available immediately Rotary Welding Table - Round Surface AKYAPAK SRH - 7000
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK SRH - 7000
          Rotary Welding Table - Round Surface

          Neu / New

          table diameter 1300 mm
          table load 7,0 t
          swivelling range 0 - 110° deg.
          AKYAPAK - SRH - 7000
          Rotary Welding Table - Round Surface
          Request / Contact
          used Machines available immediately Rotary Welding Table - Round Surface AKYAPAK SRH - 3500
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          AKYAPAK SRH - 3500
          Rotary Welding Table - Round Surface

          Neu / New

          table diameter 960 mm
          table load 3,5 t
          swivelling range 0 - 110° deg.
          AKYAPAK - SRH - 3500
          Rotary Welding Table - Round Surface
          Request / Contact
          used Machines available immediately Ambos KRUPS A100
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          KRUPS A100
          Ambos

          1960

          Krups A100
          .
          KRUPS - A100
          Ambos
          Request / Contact
          used Machines available immediately bolster plate KRUPS A2/1
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          KRUPS A2/1
          bolster plate

          1990

          plate width 1.000 mm
          plate depth 2.000 mm
          plate height 980 mm
          KRUPS - A2/1
          bolster plate
          Request / Contact
          used Machines available immediately bolster plate Krups A28
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          Krups A28
          bolster plate

          1980

          plate width 2.800 mm
          plate depth 2.800 mm
          plate height 390 mm
          Krups - A28
          bolster plate
          Request / Contact
          used Machines available immediately bolster plate KRUPS A1.4-1.6
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          KRUPS A1.4-1.6
          bolster plate

          1980

          plate width 1.400 mm
          plate depth 1.600 mm
          plate height 310 mm
          KRUPS - A1.4-1.6
          bolster plate
          Request / Contact
          used Machines available immediately bolster plate KRUPS A2-3
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          KRUPS A2-3
          bolster plate

          1980

          plate width 2.000 mm
          plate depth 3.000 mm
          plate height 600 mm
          KRUPS - A2-3
          bolster plate
          Request / Contact
          used Machines available immediately bolster plate KRUPS A 0.8-0.5
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          KRUPS A 0.8-0.5
          bolster plate

          1970

          plate width 500 mm
          plate depth 800 mm
          plate height 50 mm
          KRUPS - A 0.8-0.5
          bolster plate
          Request / Contact
          used Machines available immediately Clamping Table KRUPS A2-2,5
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          KRUPS A2-2,5
          Clamping Table

          1988

          weight 6000 kg
          length 2500 mm
          width 2000 mm
          KRUPS - A2-2,5
          Clamping Table
          Request / Contact
          used Machines available immediately Clamping Table Krups A16
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          Krups A16
          Clamping Table

          1980

          table length 1.600 mm
          table width 1.600 mm
          table load 3 t
          Krups - A16
          Clamping Table
          Request / Contact
          used Machines available immediately Floor Plates KRUPS A 4.2-9,7
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          KRUPS A 4.2-9,7
          Floor Plates

          1990

          length 4260 mm
          width 970 mm
          height 180 mm
          KRUPS - A 4.2-9,7
          Floor Plates
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

          TOP Manufacturer: