,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Hydr. pressbrake

          Machinelist: Hydr. pressbrake


          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA PBF 2560


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2189 · Hydr. pressbrake

          HESSE by DURMA - PBF 2560 - - 2018 -

          Technical details
          gebraucht20188309prompt, Zwischenverkauf vTürkei31200 €︱ 160 to︱ 2550 mm︱ Y1 / Y2 / X Achse160 mm︱ 2150 mm︱ 250 mm︱ 350 mm︱ hydraulisch120 mm/s︱ 9 mm/s︱ 70 mm/s︱ 620 mm︱ 250 mm/s︱
          3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB Manual, centrally adjustable crowning device Laser safety device on the upper beam Fiessler Akas foot pedal Side and rear protective covers 2 pcs. back gauge fingers 2 front sheet support arms upper tool Euram 1027/A/30/0,8° H=104mm, 3x835mm, 2x835mm split used 4-V die block 2009/60° (V= 10,16,22,35mm), 3x835mm, 2x835mm split, second-hand cranked upper tool UKB 10.506 60°, h=130mm, R=0,8mm, 1x835mm, 2x415mm, 1x 835mm split used Bottom tool UKB 20.300, V=12mm, H=80mm, R=0.8, 1x835mm, 3x415mm, 1x835mm split used Operating instructions DEUTSCH incl. declaration of conformity ADVANTGES OF PBF SERIES: - compact structure - low cost due to serial production of standardised models without restrictions in quality and accuracy
            gebraucht
            2018
            8309
            prompt, Zwischenverkauf v
            Türkei
            31200 €
            1
            60 to
            2550 mm
            Y1 / Y2 / X Achse
            160 mm
            2150 mm
            250 mm
            350 mm
            hydraulisch
            120 mm/s
            9 mm/s
            70 mm/s
            620 mm
            250 mm/s
            Description :
            3 axes (Y1, Y2, and X axis)
            CNC control DT-10
            - intuitive touch-screen control (simple drawing of the bending outline with your finger)
            - user friendly programming in dialogue form
            - automatic calculation of bending sequence
            - automatic calculation of the blank sheet size
            - graphic product and tool memory
            - correction possibility
            - USB interfaces for backup and programm transportation
            - PC software, generating programms on the PC and transfer to the machine by USB
            Manual, centrally adjustable crowning device
            Laser safety device on the upper beam Fiessler Akas
            foot pedal
            Side and rear protective covers
            2 pcs. back gauge fingers
            2 front sheet support arms
            upper tool Euram 1027/A/30/0,8° H=104mm, 3x835mm, 2x835mm split used
            4-V die block 2009/60° (V= 10,16,22,35mm), 3x835mm, 2x835mm split, second-hand
            cranked upper tool UKB 10.506 60°, h=130mm, R=0,8mm, 1x835mm, 2x415mm, 1x 835mm split used
            Bottom tool UKB 20.300, V=12mm, H=80mm, R=0.8, 1x835mm, 3x415mm, 1x835mm split used
            Operating instructions DEUTSCH incl. declaration of conformity
            ADVANTGES OF PBF SERIES:
            - compact structure
            - low cost due to serial production of standardised models without restrictions in quality and accuracy


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Unbekannt/Unknown BAYKAL APH 3106x120


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1732 · Hydr. pressbrake

          Unbekannt/Unknown - BAYKAL APH 3106x120 - - 1997 -

          Technical details
          gebraucht19978250Türkei22500 €︱ 1120 to︱ 3100 mm︱ 180 mm︱ 2550 mm︱ 240 mm︱ 320 mm︱ 170 mm︱ 11 kW︱ 3500 mm︱ 1450 mm︱ 2270 mm︱ 7200 kg︱ 600 mm︱ 53 mm/s︱
          With 2-hand and foot control panel Motorised backgauge adjustment 600 mm via +/- push-button with mechanical reading and manual fine adjustment at the front Motorised press depth adjustment via +/- button with digital display 2 backgauge fingers 2 table support arms Foot & two-hand control Side & rear safety fairing New Multi V Die 3100 x 90 x 90 mm 7V Openings 9/13/16/20/30/35/56mm cranked upper tool 3100x110x25mm 86°, new grinded User Manual German + EG Declaration of conformity COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO
            gebraucht
            1997
            8250
            Türkei
            22500 €
            1
            120 to
            3100 mm
            180 mm
            2550 mm
            240 mm
            320 mm
            170 mm
            11 kW
            3500 mm
            1450 mm
            2270 mm
            7200 kg
            600 mm
            53 mm/s
            Description :
            With 2-hand and foot control panel
            Motorised backgauge adjustment 600 mm via +/- push-button with mechanical reading and manual fine adjustment at the front
            Motorised press depth adjustment via +/- button with digital display
            2 backgauge fingers
            2 table support arms
            Foot & two-hand control
            Side & rear safety fairing
            New Multi V Die 3100 x 90 x 90 mm
            7V Openings 9/13/16/20/30/35/56mm
            cranked upper tool 3100x110x25mm 86°, new grinded
            User Manual German + EG Declaration of conformity

            COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA HAP 30120


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1880 · Hydr. pressbrake

          HESSE by DURMA - HAP 30120 - - 1995 -

          Technical details
          gebraucht19958276prompt, Zwischenverkauf vTürkei22500 €︱ 1120 to︱ 3100 mm︱ 160 mm︱ 2550 mm︱ 240 mm︱ 100 mm/s︱ 10 mm/s︱ 230 mm︱ 11 kW︱ 3300 mm︱ 2150 mm︱ 2600 mm︱ 7500 kg︱
          retrofittedDigital display Maper HT072 Synchronisation via torsion shaft 2 Backgauge finger 2 front support arms side and rear guards 2-hand and foot control panel 1 Multi V die 3100x100x100mm 1 cranked upper tool 3050x130x44, in 2 pc. User manual in German COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO
            gebraucht
            1995
            8276
            prompt, Zwischenverkauf v
            Türkei
            22500 €
            1
            120 to
            3100 mm
            160 mm
            2550 mm
            240 mm
            100 mm/s
            10 mm/s
            230 mm
            11 kW
            3300 mm
            2150 mm
            2600 mm
            7500 kg
            Description :
            retrofittedDigital display Maper HT072
            Synchronisation via torsion shaft
            2 Backgauge finger
            2 front support arms
            side and rear guards
            2-hand and foot control panel
            1 Multi V die 3100x100x100mm
            1 cranked upper tool 3050x130x44, in 2 pc.
            User manual in German

            COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA AD-EB 2580


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1907 · Hydr. pressbrake

          HESSE by DURMA - AD-EB 2580 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei96100 €︱ 1931.61 €︱ 80 to︱ 2550 mm︱ 4320 mm︱ 2840 mm︱ 500 mm︱ servomotorischer Riemenan105 mm/s︱ 10 mm/s︱ 105 mm/s︱ 650 mm︱ 250 mm︱ 3700 mm︱ 2200 mm︱ 2550 mm︱
          Electromotor drive with multiple switched flat belt system 4 axes (Y1, Y2,X, R) CNC control DELEM DA-66T - 2D touchscreen display 17“ - 3D visualisation in simulation and production - intuitive touch-screen control (simple drawing of the bending outline with your finger) - simple and convenient data transfer - multi-simulation option - user friendly programming in dialogue form - graphic simulation of the bending sequence servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) safety device BLVT light guard linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: -no reduction of working width by side side columns, distance between columns is bigger as bending width - up to 30 % higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal - marginally frame deflection - now crowning necessary by spreading the force along the bending length - high repetition and bending accuracy along the bending lengt -low energy consumption -no hydraulic components Options: CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option € 5.670,-
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            96100 €
            1931.61 €
            80 to
            2550 mm
            4
            320 mm
            2840 mm
            500 mm
            servomotorischer Riemenan
            105 mm/s
            10 mm/s
            105 mm/s
            650 mm
            250 mm
            3700 mm
            2200 mm
            2550 mm
            Description :
            Electromotor drive with multiple switched flat belt system
            4 axes (Y1, Y2,X, R)
            CNC control DELEM DA-66T
            - 2D touchscreen display 17“
            - 3D visualisation in simulation and production
            - intuitive touch-screen control (simple drawing of the bending outline with your finger)
            - simple and convenient data transfer
            - multi-simulation option
            - user friendly programming in dialogue form
            - graphic simulation of the bending sequence
            servo motorized back gauge on linear guides and ball screws
            back gauge finger blocks on double linear guides
            upper tool 1010 / A / 75 °, devidedand cranked
            4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
            safety device BLVT light guard
            linear guided sheet support arms
            according to CE rules
            users manual in English or German

            ADVANTAGES OF THIS CONCEPT:
            -no reduction of working width by side side columns, distance between columns is bigger as bending width
            - up to 30 % higher productivity as classic hydraulic press brakes,
            by nearlyinstantaneously reaction on foot pedal signal
            - marginally frame deflection
            - now crowning necessary by spreading the force along the bending length
            - high repetition and bending accuracy along the bending lengt
            -low energy consumption
            -no hydraulic components

            Options:

            CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option



            5.670,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA AD-ES 2040


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-146 · Hydr. pressbrake

          HESSE by DURMA - AD-ES 2040 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei70500 €︱ 1417.05 €︱ 40 to︱ 2050 mm︱ Y1 / Y2 / X und R Achse200 mm︱ 1700 mm︱ 350 mm︱ 440 mm︱ servomotorischer Spindela180 mm/s︱ 10 mm/s︱ 115 mm/s︱ 650 mm︱ 250 mm︱ 1000 mm︱ 7.2 kW︱
          STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66T - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components optional equipment: Z1/Z2-axes € 4.420,- CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option € 5.670,- Quick release clamping for upper tool € 820,-
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            70500 €
            1417.05 €
            40 to
            2050 mm
            Y1 / Y2 / X und R Achse
            200 mm
            1700 mm
            350 mm
            440 mm
            servomotorischer Spindela
            180 mm/s
            10 mm/s
            115 mm/s
            650 mm
            250 mm
            1000 mm
            7.2 kW
            Description :
            STANDARD EQUIPTMENT:
            servomotorized spindle drive
            4 axes (Y1, Y2, X and R)
            Color graphics controlDELEM DA-66T
            - 17 " Touchscreen
            - 3D imaging in simulation and production
            - Suitable for personal Windows applications
            - Compatible with DelemModusys
            - USB and peripheral interface
            - Skill-specific application treatment
            - Sensor, bending and correction interface
            servo motorized back gauge on linear guides and ball screws
            CNC crowning table
            upper tool 1010 / A / 75 °, devidedand cranked
            4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
            laser safety device Fiessler AKASmounted on the upper beam
            linear guided sheet support arms
            according to CE rules
            users manual in English or German

            ADVANTAGES OF THIS CONCEPT:
            - higher productivity as classic hydraulic press brakes,
            by nearlyinstantaneously reaction on foot pedal signal
            -low energy consumption
            - compact motor-spindle unit with small amount of components
            -no hydraulic components

            optional equipment:

            Z1/Z2-axes

            4.420,-

            CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

            5.670,-

            Quick release clamping for upper tool


            820,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by LFSS AP 1520/100


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-196 · Hydr. pressbrake

          HESSE by LFSS - AP 1520/100 - - -

          Technical details
          neuca. 12 Wochen ab AuftragsTürkei20000 €︱ 410 €︱ 100 to︱ 1500 mm︱ 300 mm︱ 7.5 kW︱ 2630 mm︱ 1000 mm︱ 2275 mm︱ 2500 kg︱ 1680 mm︱ 1520 mm︱ 5 mm/s︱ 10 mm/s︱ 6 mm︱ 100 mm︱
          2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working height adjustable table user manual in Germanand English according to CE rules
            neu
            ca. 12 Wochen ab Auftrags
            Türkei
            20000 €
            410 €
            100 to
            1500 mm
            300 mm
            7.5 kW
            2630 mm
            1000 mm
            2275 mm
            2500 kg
            1
            680 mm
            1520 mm
            5 mm/s
            10 mm/s
            6 mm
            100 mm
            Description :
            2 guidings
            big upper tool holder and table witht-slots
            upper and lower pressbrake tool
            manometer
            rapid down move with automtic changeto working speed
            piston stops in every position
            manuel and 2 hand working
            height adjustable table
            user manual in Germanand English
            according to CE rules


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by LFSS AP 1020/150


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-198 · Hydr. pressbrake

          HESSE by LFSS - AP 1020/150 - - -

          Technical details
          neuca. 12 Wochen ab AuftragsTürkei22300 €︱ 457.15 €︱ 150 to︱ 1000 mm︱ 300 mm︱ 11 kW︱ 2110 mm︱ 1000 mm︱ 2450 mm︱ 2400 kg︱ 1610 mm︱ 1020 mm︱ 5 mm/s︱ 10 mm/s︱ 8 mm︱ 100 mm︱
          2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working height adjustable table user manual in Germanand English according to CE rules
            neu
            ca. 12 Wochen ab Auftrags
            Türkei
            22300 €
            457.15 €
            150 to
            1000 mm
            300 mm
            11 kW
            2110 mm
            1000 mm
            2450 mm
            2400 kg
            1
            610 mm
            1020 mm
            5 mm/s
            10 mm/s
            8 mm
            100 mm
            Description :
            2 guidings
            big upper tool holder and table witht-slots
            upper and lower pressbrake tool
            manometer
            rapid down move with automtic changeto working speed
            piston stops in every position
            manuel and 2 hand working
            height adjustable table
            user manual in Germanand English
            according to CE rules


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA AD-Servo 30320


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-140 · Hydr. pressbrake

          HESSE by DURMA - AD-Servo 30320 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei136000 €︱ 2706.4 €︱ 320 to︱ 3050 mm︱ Y1 / Y2 / X und R Achse365 mm︱ 2600 mm︱ 410 mm︱ 630 mm︱ hydraulisch160 mm/s︱ 10 mm/s︱ 160 mm/s︱ 650 mm︱ 500 mm/s︱ 250 mm︱ 900 mm︱
          1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows 10 - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed optional equipment: Z1/Z2-axes € 4.420,- CNC Control Delem DA-66T € 3.090,- CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option € 8.240,- Quick release clamping for upper tool € 960,-
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            136000 €
            2706.4 €
            320 to
            3050 mm
            Y1 / Y2 / X und R Achse
            365 mm
            2600 mm
            410 mm
            630 mm
            hydraulisch
            160 mm/s
            10 mm/s
            160 mm/s
            650 mm
            500 mm/s
            250 mm
            900 mm
            Description :
            1 SERVO MOTOR AND PUMP PER CYLINDER
            4 axes (Y1, Y2,X andR)
            CNC control SKY 22
            - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD
            - with 2D and 3D working screen
            - direct programming of the bending angle
            - user friendly programming in dialogue form optionally in 2D or 3D mode
            - 2D and 3D simulation of the bending sequence
            - automatic tool selection in 3D mode
            - automatic calculation of the blank sheet size
            - bending order calculation
            - graphic product and tool memory
            - correction possibility
            - USB and Ethernet interfaces for import, backup and programm transportation
            - OS: Windows 10
            - IGES, STEP, DXF files import
            servo motorized back gauge on linear guides and ball screws
            back gauge finger blocks on double linear guides
            CNC crowning table
            upper tool 1010 / A / 75 °, devidedand cranked
            4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
            laser safety device Fiessler AKASmounted on the upper beam
            linear guided sheet support arms
            according to CE rules
            oilfilling
            users manual in English or German

            ADVANTAGES OF THIS CONCEPT:
            - hydraulic works only while upper beam movement
            - low energy consumption
            - low noise level
            - high speed

            optional equipment:

            Z1/Z2-axes

            4.420,-

            CNC Control Delem DA-66T

            3.090,-

            CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

            8.240,-

            Quick release clamping for upper tool

            960,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA AD-Servo 60600


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2008 · Hydr. pressbrake

          HESSE by DURMA - AD-Servo 60600 - - -

          Technical details
          neuca. 4-6 Monate ab AuftragTürkei275800 €︱ 600 to︱ 6050 mm︱ Y1 / Y2 / X und R Achse365 mm︱ 5100 mm︱ 510 mm︱ 700 mm︱ hydraulisch80 mm/s︱ 6,5 mm/s︱ 80 mm/s︱ 750 mm︱ 280 l︱ 2 x 11 kW︱ 7600 mm︱ 2650 mm︱
          1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows 10 - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed PRICE FCA TURKEY optional equipment: CNC Control Delem DA-66T € 3.090,- CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option € 8.240,-
            neu
            ca. 4-6 Monate ab Auftrag
            Türkei
            275800 €
            600 to
            6050 mm
            Y1 / Y2 / X und R Achse
            365 mm
            5100 mm
            510 mm
            700 mm
            hydraulisch
            80 mm/s
            6,5 mm/s
            80 mm/s
            750 mm
            280 l
            2 x 11 kW
            7600 mm
            2650 mm
            Description :
            1 SERVO MOTOR AND PUMP PER CYLINDER
            4 axes (Y1, Y2,X andR)
            CNC control SKY 22
            - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD
            - with 2D and 3D working screen
            - direct programming of the bending angle
            - user friendly programming in dialogue form optionally in 2D or 3D mode
            - 2D and 3D simulation of the bending sequence
            - automatic tool selection in 3D mode
            - automatic calculation of the blank sheet size
            - bending order calculation
            - graphic product and tool memory
            - correction possibility
            - USB and Ethernet interfaces for import, backup and programm transportation
            - OS: Windows 10
            - IGES, STEP, DXF files import
            servo motorized back gauge on linear guides and ball screws
            back gauge finger blocks on double linear guides
            CNC crowning table
            upper tool 1010 / A / 75 °, devidedand cranked
            4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
            laser safety device Fiessler AKASmounted on the upper beam
            linear guided sheet support arms
            according to CE rules
            oilfilling
            users manual in English or German

            ADVANTAGES OF THIS CONCEPT:
            - hydraulic works only while upper beam movement
            - low energy consumption
            - low noise level
            - high speed

            PRICE FCA TURKEY

            optional equipment:

            CNC Control Delem DA-66T

            3.090,-

            CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

            8.240,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA AD-Servo 30135


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-130 · Hydr. pressbrake

          HESSE by DURMA - AD-Servo 30135 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei92700 €︱ 1863.27 €︱ 135 to︱ 3050 mm︱ Y1 / Y2 / X und R Achse265 mm︱ 2600 mm︱ 410 mm︱ 530 mm︱ hydraulisch200 mm/s︱ 10 mm/s︱ 200 mm/s︱ 650 mm︱ 500 mm/s︱ 250 mm︱ 900 mm︱
          1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows 10 - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed optional equipment: Z1/Z2-axes € 4.420,- CNC Control Delem DA-66T € 3.090,- CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option € 8.240,- Quick release clamping for upper tool € 960,-
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            92700 €
            1863.27 €
            135 to
            3050 mm
            Y1 / Y2 / X und R Achse
            265 mm
            2600 mm
            410 mm
            530 mm
            hydraulisch
            200 mm/s
            10 mm/s
            200 mm/s
            650 mm
            500 mm/s
            250 mm
            900 mm
            Description :
            1 SERVO MOTOR AND PUMP PER CYLINDER
            4 axes (Y1, Y2,X andR)
            CNC control SKY 22
            - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD
            - with 2D and 3D working screen
            - direct programming of the bending angle
            - user friendly programming in dialogue form optionally in 2D or 3D mode
            - 2D and 3D simulation of the bending sequence
            - automatic tool selection in 3D mode
            - automatic calculation of the blank sheet size
            - bending order calculation
            - graphic product and tool memory
            - correction possibility
            - USB and Ethernet interfaces for import, backup and programm transportation
            - OS: Windows 10
            - IGES, STEP, DXF files import
            servo motorized back gauge on linear guides and ball screws
            back gauge finger blocks on double linear guides
            CNC crowning table
            upper tool 1010 / A / 75 °, devidedand cranked
            4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
            laser safety device Fiessler AKASmounted on the upper beam
            linear guided sheet support arms
            according to CE rules
            oilfilling
            users manual in English or German

            ADVANTAGES OF THIS CONCEPT:
            - hydraulic works only while upper beam movement
            - low energy consumption
            - low noise level
            - high speed

            optional equipment:

            Z1/Z2-axes

            4.420,-

            CNC Control Delem DA-66T

            3.090,-

            CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

            8.240,-

            Quick release clamping for upper tool

            960,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA PBF 2560


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-148 · Hydr. pressbrake

          HESSE by DURMA - PBF 2560 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei46730 €︱ 948.62 €︱ 60 to︱ 2550 mm︱ Y1 / Y2 und X Achse160 mm︱ 2150 mm︱ 250 mm︱ 350 mm︱ hydraulisch120 mm/s︱ 9 mm/s︱ 70 mm/s︱ 620 mm︱ 250 mm/s︱ 813 mm︱ 104 mm︱
          3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles manual, centralized adjustablecrowning table intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground die holder for 60 mm dies die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground laser safety device Fiessler AKASmounted on the upper beam sheet support arms protection covers on the sides andback side according to CE rules oilfilling users manual in GERMAN orENGLISH (sample photo shows mod. PBF 30200) OPTION: CNC controlled crowning table € 2.830,- CNC controlled R-axis (adjustment range in X = 500 mm) € 6.380,- WE HAVE MORE THAN 600 REFERENCES!
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            46730 €
            948.62 €
            60 to
            2550 mm
            Y1 / Y2 und X Achse
            160 mm
            2150 mm
            250 mm
            350 mm
            hydraulisch
            120 mm/s
            9 mm/s
            70 mm/s
            620 mm
            250 mm/s
            813 mm
            104 mm
            Description :
            3 axes (Y1, Y2, and X axis)
            CNC control DT-10
            - intuitive touch-screen control (simple drawing of the bending outline with your finger)
            - user friendly programming in dialogue form
            - automatic calculation of bending sequence
            - automatic calculation of the blank sheet size
            - graphic product and tool memory
            - correction possibility
            - USB interfaces for backup and programm transportation
            - PC software, generating programms on the PC and transfer to the machine by USB
            CNC controlled back gauge with linear guide and ball screw spindles
            manual, centralized adjustablecrowning table
            intermediate clamps for upper tool
            upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground
            die holder for 60 mm dies
            die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground
            laser safety device Fiessler AKASmounted on the upper beam
            sheet support arms
            protection covers on the sides andback side
            according to CE rules
            oilfilling
            users manual in GERMAN orENGLISH
            (sample photo shows mod. PBF 30200)

            OPTION:

            CNC controlled crowning table
            € 2.830,-

            CNC controlled R-axis (adjustment range in X = 500 mm)
            € 6.380,-

            WE HAVE MORE THAN 600 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA PBF 40160


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2034 · Hydr. pressbrake

          HESSE by DURMA - PBF 40160 - - -

          Technical details
          neuca. 14 - 16 Wochen ab AufTürkei69600 €︱ 1398.96 €︱ 160 to︱ 4050 mm︱ Y1 / Y2 und X Achse200 mm︱ 3600 mm︱ 300 mm︱ 430 mm︱ hydraulisch160 mm/s︱ 10 mm/s︱ 140 mm/s︱ 620 mm︱ 250 mm/s︱ 858 mm︱ 104 mm︱
          3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles Manual crowning intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground die holder for 60 mm dies die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground laser safety device Fiessler AKASmounted on the upper beam sheet support arms protection covers on the sides andback side according to CE rules oilfilling users manual in GERMAN orENGLISH ADVANTGES OF PBF SERIES: - compact structure - low cost due to serial production of standardised models without restrictions in quality and accuracy OPTION: CNC controlled crowning table € 2.840,- CNC controlled R-axis (adjustment range in X = 500 mm) € 7.040,- WE HAVE MORE THAN 600 REFERENCES! (sample photo)
            neu
            ca. 14 - 16 Wochen ab Auf
            Türkei
            69600 €
            1398.96 €
            160 to
            4050 mm
            Y1 / Y2 und X Achse
            200 mm
            3600 mm
            300 mm
            430 mm
            hydraulisch
            160 mm/s
            10 mm/s
            140 mm/s
            620 mm
            250 mm/s
            858 mm
            104 mm
            Description :
            3 axes (Y1, Y2, and X axis)
            CNC control DT-10
            - intuitive touch-screen control (simple drawing of the bending outline with your finger)
            - user friendly programming in dialogue form
            - automatic calculation of bending sequence
            - automatic calculation of the blank sheet size
            - graphic product and tool memory
            - correction possibility
            - USB interfaces for backup and programm transportation
            - PC software, generating programms on the PC and transfer to the machine by USB
            CNC controlled back gauge with linear guide and ball screw spindles
            Manual crowning
            intermediate clamps for upper tool
            upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground
            die holder for 60 mm dies
            die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground
            laser safety device Fiessler AKASmounted on the upper beam
            sheet support arms
            protection covers on the sides andback side
            according to CE rules
            oilfilling
            users manual in GERMAN orENGLISH

            ADVANTGES OF PBF SERIES:
            - compact structure
            - low cost due to serial production of standardised models without restrictions in quality and accuracy

            OPTION:

            CNC controlled crowning table
            € 2.840,-

            CNC controlled R-axis (adjustment range in X = 500 mm)
            € 7.040,-

            WE HAVE MORE THAN 600 REFERENCES!

            (sample photo)


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA AD-Servo 40600


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2002 · Hydr. pressbrake

          HESSE by DURMA - AD-Servo 40600 - - -

          Technical details
          neuca. 14 - 16 Wochen ab AufTürkei238500 €︱ 600 to︱ 4050 mm︱ Y1 / Y2 / X und R Achse365 mm︱ 3100 mm︱ 410 mm︱ 700 mm︱ hydraulisch160 mm/s︱ 10 mm/s︱ 160 mm/s︱ 650 mm︱ 500 mm/s︱ 250 mm︱ 900 mm︱ 154 mm︱
          1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) Color graphics control Delem DA 66 T - 19" Touchscreen - intuitive touch-screen control (simple drawing of the bending outline with your finger) - automatic bending list - simple and convenient data transfer - multi-simulation option - direct programming of the bending angle - user friendly programming in dialogue form - graphic simulation of the bending sequence servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed PRICE FCA TURKEY optional equipment: CNC Control Delem DA-66T € 3.090,- CNC control Delem DA-69S 3D incl. PC software Profile-S with 3D file import option € 8.240,-
            neu
            ca. 14 - 16 Wochen ab Auf
            Türkei
            238500 €
            600 to
            4050 mm
            Y1 / Y2 / X und R Achse
            365 mm
            3100 mm
            410 mm
            700 mm
            hydraulisch
            160 mm/s
            10 mm/s
            160 mm/s
            650 mm
            500 mm/s
            250 mm
            900 mm
            154 mm
            Description :
            1 SERVO MOTOR AND PUMP PER CYLINDER
            4 axes (Y1, Y2,X andR)
            Color graphics control Delem DA 66 T
            - 19" Touchscreen
            - intuitive touch-screen control (simple drawing of the bending outline with your finger)
            - automatic bending list
            - simple and convenient data transfer
            - multi-simulation option
            - direct programming of the bending angle
            - user friendly programming in dialogue form
            - graphic simulation of the bending sequence
            servo motorized back gauge on linear guides and ball screws
            back gauge finger blocks on double linear guides
            CNC crowning table
            upper tool 1010 / A / 75 °, devidedand cranked
            4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
            laser safety device Fiessler AKASmounted on the upper beam
            linear guided sheet support arms
            according to CE rules
            oilfilling
            users manual in English or German

            ADVANTAGES OF THIS CONCEPT:
            - hydraulic works only while upper beam movement
            - low energy consumption
            - low noise level
            - high speed

            PRICE FCA TURKEY

            optional equipment:

            CNC Control Delem DA-66T

            3.090,-

            CNC control Delem DA-69S 3D incl. PC software Profile-S with 3D file import option

            8.240,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA AD-S 30100


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2038 · Hydr. pressbrake

          HESSE by DURMA - AD-S 30100 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei65440 €︱ 1315.34 €︱ 100 to︱ 3050 mm︱ Y1 / Y2 / X Achse265 mm︱ 2600 mm︱ 450 mm︱ 530 mm︱ hydraulisch180 mm/s︱ 10 mm/s︱ 120 mm/s︱ 500 mm/s︱ 900 mm︱ 104 mm︱ 11 kW︱
          3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC CONTROLLED CROWNING TABLE upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PDF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis € 7.600,- R/Z1/Z2-Axis € 11.190,- CNC Control SKY22 € 3.820,- CNC Control Delem DA66T € 6.180,- CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option € 11.850,- Quick Release Clamping € 960,-
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            65440 €
            1315.34 €
            100 to
            3050 mm
            Y1 / Y2 / X Achse
            265 mm
            2600 mm
            450 mm
            530 mm
            hydraulisch
            180 mm/s
            10 mm/s
            120 mm/s
            500 mm/s
            900 mm
            104 mm
            11 kW
            Description :
            3 axes (Y1, Y2,X)
            CNC control DT-15
            - 2D grafic display 15"
            - intuitive touch-screen control (simple drawing of the bending outline with your finger)
            - user friendly programming in dialogue form
            - automatic calculation of the bending sequence
            - automatic calculation of the blank sheet size
            - graphic product and tool memory
            - correction possibility
            - USB interfaces for backup and programm transportation
            - PC software, generating programms on the PC and transfer to the machine by USB
            servo motorized back gauge on linear guides and ball screws
            back gauge finger blocks on double linear guides
            CNC CONTROLLED CROWNING TABLE
            upper tool 1010 / A / 75 °, devidedand cranked
            4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
            laser safety device Fiessler AKASmounted on the upper beam
            linear guided sheet support arms
            according to CE rules
            oilfilling
            users manual in English or German

            ADVANTAGES OF AD-S COMPAIRED TO PDF:
            - more stroke, installation height and throat
            - higher approach and retraction speed of the top beam
            - higher backgauge speed
            - backgauge finger on double instead of single linear guide
            - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ...

            optional equipment:

            R-Axis



            7.600,-

            R/Z1/Z2-Axis



            11.190,-

            CNC Control SKY22



            3.820,-

            CNC Control Delem DA66T



            6.180,-

            CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option



            11.850,-

            Quick Release Clamping



            960,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA AD-S 1260


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2036 · Hydr. pressbrake

          HESSE by DURMA - AD-S 1260 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei49500 €︱ 1004.85 €︱ 60 to︱ 1250 mm︱ 3 (Y1, Y2, X)265 mm︱ 1050 mm︱ 450 mm︱ 530 mm︱ hydraulisch200 mm/s︱ 10 mm/s︱ 110 mm/s︱ 650 mm︱ 500 mm/s︱ 900 mm︱ 104 mm︱
          3 axes (Y1, Y2,X ) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis € 7.140,- R/Z1/Z2-Axis € 9.640,- CNC Control SKY22 € 3.820,- CNC Control Delem DA66T € 6.180,- CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option € 11.850,- Quick Release Clamping € 900,-
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            49500 €
            1004.85 €
            60 to
            1250 mm
            3 (Y1, Y2, X)
            265 mm
            1050 mm
            450 mm
            530 mm
            hydraulisch
            200 mm/s
            10 mm/s
            110 mm/s
            650 mm
            500 mm/s
            900 mm
            104 mm
            Description :
            3 axes (Y1, Y2,X )
            CNC control DT-15
            - 2D grafic display 15"
            - intuitive touch-screen control (simple drawing of the bending outline with your finger)
            - user friendly programming in dialogue form
            - automatic calculation of the bending sequence
            - automatic calculation of the blank sheet size
            - graphic product and tool memory
            - correction possibility
            - USB interfaces for backup and programm transportation
            - PC software, generating programms on the PC and transfer to the machine by USB
            servo motorized back gauge on linear guides and ball screws
            back gauge finger blocks on double linear guides
            upper tool 1010 / A / 75 °, devidedand cranked
            4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
            laser safety device Fiessler AKASmounted on the upper beam
            linear guided sheet support arms
            according to CE rules
            oilfilling
            users manual in English or German

            ADVANTAGES OF AD-S COMPAIRED TO PBF:
            - more stroke, installation height and throat
            - higher approach and retraction speed of the top beam
            - higher backgauge speed
            - backgauge finger on double instead of single linear guide
            - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ...

            optional equipment:

            R-Axis



            7.140,-

            R/Z1/Z2-Axis



            9.640,-

            CNC Control SKY22



            3.820,-

            CNC Control Delem DA66T



            6.180,-

            CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option



            11.850,-

            Quick Release Clamping



            900,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA AD-S 40400


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2012 · Hydr. pressbrake

          HESSE by DURMA - AD-S 40400 - - -

          Technical details
          neuca. 14 - 16 Wochen ab AufTürkei161600 €︱ 3183.52 €︱ 400 to︱ 4050 mm︱ Y1 / Y2 / X Achse365 mm︱ 3400 mm︱ 510 mm︱ 630 mm︱ hydraulisch160 mm/s︱ 10 mm/s︱ 140 mm/s︱ 500 mm/s︱ 350 mm/s︱ 250 mm︱ 1050 mm︱
          3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... PRICE FCA TURKEY optional equipment: R-Axis € 9.180,- R/Z1/Z2-Axis € 16.230,- CNC Control SKY22 € 3.820,- CNC Control Delem DA66T € 6.180,- CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option € 11.850,-
            neu
            ca. 14 - 16 Wochen ab Auf
            Türkei
            161600 €
            3183.52 €
            400 to
            4050 mm
            Y1 / Y2 / X Achse
            365 mm
            3400 mm
            510 mm
            630 mm
            hydraulisch
            160 mm/s
            10 mm/s
            140 mm/s
            500 mm/s
            350 mm/s
            250 mm
            1050 mm
            Description :
            3 axes (Y1, Y2,X)
            CNC control DT-15
            - 2D grafic display 15"
            - intuitive touch-screen control (simple drawing of the bending outline with your finger)
            - user friendly programming in dialogue form
            - automatic calculation of the bending sequence
            - automatic calculation of the blank sheet size
            - graphic product and tool memory
            - correction possibility
            - USB interfaces for backup and programm transportation
            - PC software, generating programms on the PC and transfer to the machine by USB
            servo motorized back gauge on linear guides and ball screws
            back gauge finger blocks on double linear guides
            CNC crowning table
            upper tool 1010 / A / 75 °, devidedand cranked
            4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
            laser safety device Fiessler AKASmounted on the upper beam
            linear guided sheet support arms
            according to CE rules
            oilfilling
            users manual in English or German

            ADVANTAGES OF AD-S COMPAIRED TO PBF:
            - more stroke, installation height and throat
            - higher approach and retraction speed of the top beam
            - higher backgauge speed
            - backgauge finger on double instead of single linear guide
            - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ...

            PRICE FCA TURKEY

            optional equipment:

            R-Axis



            9.180,-

            R/Z1/Z2-Axis



            16.230,-

            CNC Control SKY22



            3.820,-

            CNC Control Delem DA66T



            6.180,-

            CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option



            11.850,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA AD-S 40320


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2010 · Hydr. pressbrake

          HESSE by DURMA - AD-S 40320 - - -

          Technical details
          neuca. 14 - 16 Wochen ab AufTürkei116640 €︱ 2321.14 €︱ 320 to︱ 4050 mm︱ Y1 / Y2 / X Achse365 mm︱ 3600 mm︱ 450 mm︱ 630 mm︱ hydraulisch160 mm/s︱ 10 mm/s︱ 140 mm/s︱ 500 mm/s︱ 350 mm/s︱ 250 mm︱ 900 mm︱
          3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis € 8.390,- R/Z1/Z2-Axis € 13.110,- CNC Control SKY22 € 3.820,- CNC Control Delem DA66T € 6.180,- CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option € 11.850,-
            neu
            ca. 14 - 16 Wochen ab Auf
            Türkei
            116640 €
            2321.14 €
            320 to
            4050 mm
            Y1 / Y2 / X Achse
            365 mm
            3600 mm
            450 mm
            630 mm
            hydraulisch
            160 mm/s
            10 mm/s
            140 mm/s
            500 mm/s
            350 mm/s
            250 mm
            900 mm
            Description :
            3 axes (Y1, Y2,X)
            CNC control DT-15
            - 2D grafic display 15"
            - intuitive touch-screen control (simple drawing of the bending outline with your finger)
            - user friendly programming in dialogue form
            - automatic calculation of the bending sequence
            - automatic calculation of the blank sheet size
            - graphic product and tool memory
            - correction possibility
            - USB interfaces for backup and programm transportation
            - PC software, generating programms on the PC and transfer to the machine by USB
            servo motorized back gauge on linear guides and ball screws
            back gauge finger blocks on double linear guides
            CNC crowning table
            upper tool 1010 / A / 75 °, devidedand cranked
            4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
            laser safety device Fiessler AKASmounted on the upper beam
            linear guided sheet support arms
            according to CE rules
            oilfilling
            users manual in English or German

            ADVANTAGES OF AD-S COMPAIRED TO PBF:
            - more stroke, installation height and throat
            - higher approach and retraction speed of the top beam
            - higher backgauge speed
            - backgauge finger on double instead of single linear guide
            - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ...

            optional equipment:

            R-Axis



            8.390,-

            R/Z1/Z2-Axis



            13.110,-

            CNC Control SKY22



            3.820,-

            CNC Control Delem DA66T



            6.180,-

            CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option



            11.850,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA AD-Servo 60400


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2006 · Hydr. pressbrake

          HESSE by DURMA - AD-Servo 60400 - - -

          Technical details
          neuca. 4-6 Monate ab AuftragTürkei218900 €︱ 400 to︱ 6050 mm︱ Y1 / Y2 / X und R Achse365 mm︱ 5100 mm︱ 510 mm︱ 630 mm︱ hydraulisch150 mm/s︱ 9 mm/s︱ 150 mm/s︱ 750 mm︱ 160 l︱ 2x11 kW︱ 7500 mm︱ 2110 mm︱
          1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows 10 - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed PRICE FCA TURKEY optional equipment: CNC Control Delem DA-66T € 3.090,- CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option € 8.240,-
            neu
            ca. 4-6 Monate ab Auftrag
            Türkei
            218900 €
            400 to
            6050 mm
            Y1 / Y2 / X und R Achse
            365 mm
            5100 mm
            510 mm
            630 mm
            hydraulisch
            150 mm/s
            9 mm/s
            150 mm/s
            750 mm
            160 l
            2x11 kW
            7500 mm
            2110 mm
            Description :
            1 SERVO MOTOR AND PUMP PER CYLINDER
            4 axes (Y1, Y2,X andR)
            CNC control SKY 22
            - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD
            - with 2D and 3D working screen
            - direct programming of the bending angle
            - user friendly programming in dialogue form optionally in 2D or 3D mode
            - 2D and 3D simulation of the bending sequence
            - automatic tool selection in 3D mode
            - automatic calculation of the blank sheet size
            - bending order calculation
            - graphic product and tool memory
            - correction possibility
            - USB and Ethernet interfaces for import, backup and programm transportation
            - OS: Windows 10
            - IGES, STEP, DXF files import
            servo motorized back gauge on linear guides and ball screws
            back gauge finger blocks on double linear guides
            CNC crowning table
            upper tool 1010 / A / 75 °, devidedand cranked
            4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
            laser safety device Fiessler AKASmounted on the upper beam
            linear guided sheet support arms
            according to CE rules
            oilfilling
            users manual in English or German

            ADVANTAGES OF THIS CONCEPT:
            - hydraulic works only while upper beam movement
            - low energy consumption
            - low noise level
            - high speed

            PRICE FCA TURKEY

            optional equipment:

            CNC Control Delem DA-66T

            3.090,-

            CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

            8.240,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by JHL HOL-40E 800


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-164 · Hydr. pressbrake

          HESSE by JHL - HOL-40E 800 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufSlowakei26300 €︱ 533.89 €︱ 40 to︱ 800 mm︱ X und Y Achse100 mm︱ 310 mm︱ hydraulisch38 l︱ 6 kW︱ 1750 mm︱ 950 mm︱ 1900 mm︱ 1640 kg︱ 420 mm︱ 110 mm/s︱
          2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter push buttons for pressing depth Y with digital display intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German
            neu
            ca. 12 - 14 Wochen ab Auf
            Slowakei
            26300 €
            533.89 €
            40 to
            800 mm
            X und Y Achse
            100 mm
            310 mm
            hydraulisch
            38 l
            6 kW
            1750 mm
            950 mm
            1900 mm
            1640 kg
            420 mm
            1
            10 mm/s
            Description :
            2 axes(Y andX)
            motorized backgauge with push button and manual fine adjustment with counter
            push buttons for pressing depth Y with digital display
            intermediate piece with quick-release lever for upper tool clamping
            upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided
            die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided
            2 support arms
            according to CE rules
            oilfilling
            user manual in German


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by JHL HOL-40E 1250


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-166 · Hydr. pressbrake

          HESSE by JHL - HOL-40E 1250 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufSlowakei28000 €︱ 568.4 €︱ 40 to︱ 1250 mm︱ X und Y Achse100 mm︱ 310 mm︱ hydraulisch38 l︱ 6 kW︱ 1750 mm︱ 950 mm︱ 1900 mm︱ 1640 kg︱ 420 mm︱ 110 mm/s︱
          2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter push buttons for pressing depth Y with digital display intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German
            neu
            ca. 12 - 14 Wochen ab Auf
            Slowakei
            28000 €
            568.4 €
            40 to
            1250 mm
            X und Y Achse
            100 mm
            310 mm
            hydraulisch
            38 l
            6 kW
            1750 mm
            950 mm
            1900 mm
            1640 kg
            420 mm
            1
            10 mm/s
            Description :
            2 axes(Y andX)
            motorized backgauge with push button and manual fine adjustment with counter
            push buttons for pressing depth Y with digital display
            intermediate piece with quick-release lever for upper tool clamping
            upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided
            die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided
            2 support arms
            according to CE rules
            oilfilling
            user manual in German


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA AD-S 2060


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1986 · Hydr. pressbrake

          HESSE by DURMA - AD-S 2060 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei54640 €︱ 1098.26 €︱ 60 to︱ 2050 mm︱ 3 (Y1, Y2, X)265 mm︱ 1700 mm︱ 450 mm︱ 530 mm︱ hydraulisch200 mm/s︱ 10 mm/s︱ 110 mm/s︱ 650 mm︱ 500 mm/s︱ 350 mm/s︱ 250 mm︱
          3 axes (Y1, Y2,X ) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis € 7.140,- R/Z1/Z2-Axis € 9.640,- CNC Control SKY22 € 3.820,- CNC Control Delem DA66T € 6.180,- CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option € 11.850,- Quick Release Clamping € 900,-
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            54640 €
            1098.26 €
            60 to
            2050 mm
            3 (Y1, Y2, X)
            265 mm
            1700 mm
            450 mm
            530 mm
            hydraulisch
            200 mm/s
            10 mm/s
            110 mm/s
            650 mm
            500 mm/s
            350 mm/s
            250 mm
            Description :
            3 axes (Y1, Y2,X )
            CNC control DT-15
            - 2D grafic display 15"
            - intuitive touch-screen control (simple drawing of the bending outline with your finger)
            - user friendly programming in dialogue form
            - automatic calculation of the bending sequence
            - automatic calculation of the blank sheet size
            - graphic product and tool memory
            - correction possibility
            - USB interfaces for backup and programm transportation
            - PC software, generating programms on the PC and transfer to the machine by USB
            servo motorized back gauge on linear guides and ball screws
            back gauge finger blocks on double linear guides
            CNC crowning table
            upper tool 1010 / A / 75 °, devidedand cranked
            4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
            laser safety device Fiessler AKASmounted on the upper beam
            linear guided sheet support arms
            according to CE rules
            oilfilling
            users manual in English or German

            ADVANTAGES OF AD-S COMPAIRED TO PBF:
            - more stroke, installation height and throat
            - higher approach and retraction speed of the top beam
            - higher backgauge speed
            - backgauge finger on double instead of single linear guide
            - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ...

            optional equipment:

            R-Axis



            7.140,-

            R/Z1/Z2-Axis



            9.640,-

            CNC Control SKY22



            3.820,-

            CNC Control Delem DA66T



            6.180,-

            CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option



            11.850,-

            Quick Release Clamping



            900,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA AD-ES 1240


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-144 · Hydr. pressbrake

          HESSE by DURMA - AD-ES 1240 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei68200 €︱ 1370.82 €︱ 40 to︱ 1250 mm︱ Y1 / Y2 / X und R Achse200 mm︱ 1050 mm︱ 250 mm︱ 440 mm︱ servomotorischer Spindela115 mm/s︱ 10 mm/s︱ 115 mm/s︱ 650 mm︱ 250 mm︱ 1000 mm︱ 7.2 kW︱
          STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66T - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components optional equipment: Z1/Z2-axes € 4.420,- CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option € 5.670,- Quick release clamping for upper tool € 720,-
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            68200 €
            1370.82 €
            40 to
            1250 mm
            Y1 / Y2 / X und R Achse
            200 mm
            1050 mm
            250 mm
            440 mm
            servomotorischer Spindela
            115 mm/s
            10 mm/s
            115 mm/s
            650 mm
            250 mm
            1000 mm
            7.2 kW
            Description :
            STANDARD EQUIPTMENT:

            servomotorized spindle drive
            4 axes (Y1, Y2, X and R)
            Color graphics controlDELEM DA-66T
            - 17 " Touchscreen
            - 3D imaging in simulation and production
            - Suitable for personal Windows applications
            - Compatible with DelemModusys
            - USB and peripheral interface
            - Skill-specific application treatment
            - Sensor, bending and correction interface
            servo motorized back gauge on linear guides and ball screws
            CNC crowning table
            upper tool 1010 / A / 75 °, devidedand cranked
            4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
            laser safety device Fiessler AKASmounted on the upper beam
            linear guided sheet support arms
            according to CE rules
            users manual in English or German

            ADVANTAGES OF THIS CONCEPT:
            - higher productivity as classic hydraulic press brakes,
            by nearlyinstantaneously reaction on foot pedal signal
            -low energy consumption
            - compact motor-spindle unit with small amount of components
            -no hydraulic components

            optional equipment:

            Z1/Z2-axes

            4.420,-

            CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

            5.670,-

            Quick release clamping for upper tool

            720,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA AD-EB 30135


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1918 · Hydr. pressbrake

          HESSE by DURMA - AD-EB 30135 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei107600 €︱ 2141.24 €︱ 135 to︱ 3050 mm︱ 4320 mm︱ 3340 mm︱ 500 mm︱ servomotorischer Riemenan100 mm/s︱ 10 mm/s︱ 100 mm/s︱ 650 mm︱ 250 mm︱ 4200 mm︱ 2200 mm︱ 2550 mm︱
          servomotor drive with multiple switched flat belt system 4 axes (Y1, Y2,X, R) CNC control DELEM DA-66T - 2D touchscreen display 17“ - 3D visualisation in simulation and production - intuitive touch-screen control (simple drawing of the bending outline with your finger) - simple and convenient data transfer - multi-simulation option - user friendly programming in dialogue form - graphic simulation of the bending sequence servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) safety device BLVT light guard linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: -no reduction of working width by side side columns, distance between columns is bigger as bending width - up to 30 % higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal - marginally frame deflection - now crowning necessary by spreading the force along the bending length - high repetition and bending accuracy along the bending lengt -low energy consumption -no hydraulic components Options: CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option € 5.670,-
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            107600 €
            2141.24 €
            135 to
            3050 mm
            4
            320 mm
            3340 mm
            500 mm
            servomotorischer Riemenan
            100 mm/s
            10 mm/s
            100 mm/s
            650 mm
            250 mm
            4200 mm
            2200 mm
            2550 mm
            Description :
            servomotor drive with multiple switched flat belt system
            4 axes (Y1, Y2,X, R)
            CNC control DELEM DA-66T
            - 2D touchscreen display 17“
            - 3D visualisation in simulation and production
            - intuitive touch-screen control (simple drawing of the bending outline with your finger)
            - simple and convenient data transfer
            - multi-simulation option
            - user friendly programming in dialogue form
            - graphic simulation of the bending sequence
            servo motorized back gauge on linear guides and ball screws
            back gauge finger blocks on double linear guides
            upper tool 1010 / A / 75 °, devidedand cranked
            4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
            safety device BLVT light guard
            linear guided sheet support arms
            according to CE rules
            users manual in English or German

            ADVANTAGES OF THIS CONCEPT:
            -no reduction of working width by side side columns, distance between columns is bigger as bending width
            - up to 30 % higher productivity as classic hydraulic press brakes,
            by nearlyinstantaneously reaction on foot pedal signal
            - marginally frame deflection
            - now crowning necessary by spreading the force along the bending length
            - high repetition and bending accuracy along the bending lengt
            -low energy consumption
            -no hydraulic components

            Options:

            CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option



            5.670,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HESSE by DURMA AD-Servo 30220


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-134 · Hydr. pressbrake

          HESSE by DURMA - AD-Servo 30220 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei106300 €︱ 2115.37 €︱ 220 to︱ 3050 mm︱ Y1 / Y2 / X und R Achse265 mm︱ 2600 mm︱ 410 mm︱ 530 mm︱ hydraulisch200 mm/s︱ 12 mm/s︱ 180 mm/s︱ 650 mm︱ 500 mm/s︱ 250 mm︱ 900 mm︱
          1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows 10 - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed optional equipment: Z1/Z2-axes € 4.420,- CNC Control Delem DA-66T € 3.090,- CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option € 8.240,- Quick release clamping for upper tool € 960,-
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            106300 €
            2115.37 €
            220 to
            3050 mm
            Y1 / Y2 / X und R Achse
            265 mm
            2600 mm
            410 mm
            530 mm
            hydraulisch
            200 mm/s
            12 mm/s
            180 mm/s
            650 mm
            500 mm/s
            250 mm
            900 mm
            Description :
            1 SERVO MOTOR AND PUMP PER CYLINDER
            4 axes (Y1, Y2,X andR)
            CNC control SKY 22
            - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD
            - with 2D and 3D working screen
            - direct programming of the bending angle
            - user friendly programming in dialogue form optionally in 2D or 3D mode
            - 2D and 3D simulation of the bending sequence
            - automatic tool selection in 3D mode
            - automatic calculation of the blank sheet size
            - bending order calculation
            - graphic product and tool memory
            - correction possibility
            - USB and Ethernet interfaces for import, backup and programm transportation
            - OS: Windows 10
            - IGES, STEP, DXF files import
            servo motorized back gauge on linear guides and ball screws
            back gauge finger blocks on double linear guides
            CNC crowning table
            upper tool 1010 / A / 75 °, devidedand cranked
            4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)
            laser safety device Fiessler AKASmounted on the upper beam
            linear guided sheet support arms
            according to CE rules
            oilfilling
            users manual in English or German

            ADVANTAGES OF THIS CONCEPT:
            - hydraulic works only while upper beam movement
            - low energy consumption
            - low noise level
            - high speed

            optional equipment:

            Z1/Z2-axes

            4.420,-

            CNC Control Delem DA-66T

            3.090,-

            CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

            8.240,-

            Quick release clamping for upper tool

            960,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   


          Buy used hydraulic press brakes from LagerMaschinen
          Hydraulic press brakes from LagerMaschinen are a great idea

          When purchasing machines for your newly opened or expanding company the prices of brand new machines can be daunting or downright limiting. With LagerMaschinen the customer is able to research find and purchase the hydraulic press breaks that fit their needs as well as being reasonably priced. LagerMaschinen's online platform is designed to give customers and sellers alike what they need: an appropriate space for communication regarding hydraulic press brakes to be bought and sold technical specifications and measurements and delivery and installation services. LagerMaschinen's goal is to provide everyone with what they need to best meet their professional and financial goals. By working with LagerMaschinen your search for the right hydraulic press brakes is faster more informed and more affordable.

          Used hydraulic press brakes from LagerMaschinen

          Hydraulic press brakes are used to bend metal - most often sheet metal - to the appropriate size and shape needed. These machines are used in a wide variety of industries serving as either part of a series of production steps or as the primary machine needed. Certain hydraulic press brakes are additionally fitted with different dies such as v-dies (producing a 'v' shape) offset dies (forming a 'z' shape) or curling dies (curling the end of the sheet metal. Hydraulic press brakes are more high-powered safer (as they can be stopped more easily in the event of an emergency) and produce more uniform results. With LagerMaschinen's wide inventory of hydraulic press brakes and other machines you'll surely find the product that's right for your production needs.