,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Hydr. pressbrake

          Machinelist: Hydr. pressbrake


          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake Trumpf V85


          • B&R Service GmbH
          • Esslingerstr.8
          • 73776 Altbach
          • Deutschland

          • +49 (0)7153 99 46 565
            +49 (0)7153 99 46 568
          • info@b-r-service.de
            www.b-r-service.de
          #2025-1122341 · Hydr. pressbrake

          Trumpf - V85 - - 2002 - Delem DA 69

          Technical details
          pressure 85 t︱chamfer lenght 2050 mm︱distance between columns 1780 mm︱Stroke beam 365 mm︱ 600 mm︱ 350 mm︱Quick speed,inspeed 150 mm/sec︱bendingspeed 0-10 mm/sec︱opening speed 150 mm/sec︱ 600 mm︱R1 and R2 axis controlled by cnc 200 mm︱Z1+Z2 axes controlled by cnc 300-1700 mm︱Number of working hours 41000 h︱Dimensions of machine: ︱length 2600 mm︱width 2000 mm︱height 2900 mm︱weight 9300 kg︱Control Delem DA 69 ︱total power requirement 14 kW︱
            pressure 85 t
            chamfer lenght 2050 mm
            distance between columns 1780 mm
            Stroke beam 365 mm
            600 mm
            350 mm
            Quick speed,inspeed 150 mm/sec
            bendingspeed 0-10 mm/sec
            opening speed 150 mm/sec
            600 mm
            R1 and R2 axis controlled by cnc 200 mm
            Z1+Z2 axes controlled by cnc 300-1700 mm
            Number of working hours 41000 h
            length 2600 mm
            width 2000 mm
            height 2900 mm
            weight 9300 kg
            Control Delem DA 69
            total power requirement 14 kW


        • B&R Service GmbH
        • Esslingerstr.8
        • 73776 Altbach
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake TRUMPF TrumaBend V130


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021162 · Hydr. pressbrake

          TRUMPF - TrumaBend V130 - - 2002 -

          Technical details
          pressure 130 t︱chamfer lenght 3060 mm︱distance between columns 2690 mm︱stroke 365 mm︱safety distance 104 mm︱voltage 3 x 400 V︱rated current 47 A︱frequency 50 Hz︱Power connection 18,8 kVA︱control voltage 24 kW︱Required air-pressure 6 bar︱ 65 ms︱operating pressure 340 bar︱weight of the machine ca. 12950 kg︱
            pressure 130 t
            chamfer lenght 3060 mm
            distance between columns 2690 mm
            stroke 365 mm
            safety distance 104 mm
            voltage 3 x 400 V
            rated current 47 A
            frequency 50 Hz
            Power connection 18,8 kVA
            control voltage 24 kW
            Required air-pressure 6 bar
            65 ms
            operating pressure 340 bar
            weight of the machine ca. 12950 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Trumpf V85


          • B&R Service GmbH
          • Esslingerstr.8
          • 73776 Altbach
          • Deutschland

          • +49 (0)7153 99 46 565
            +49 (0)7153 99 46 568
          • info@b-r-service.de
            www.b-r-service.de
          #2025-1122342 · Hydr. pressbrake

          Trumpf - V85 - - 2002 - Delem DA 69

          Technical details
          pressure 85 t︱chamfer lenght 2050 mm︱distance between columns 1780 mm︱Stroke beam 365 mm︱ 600 mm︱ 350 mm︱Quick speed,inspeed 150 mm/sec︱bendingspeed 0-10 mm/sec︱opening speed 150 mm/sec︱ 600 mm︱R1 and R2 axis controlled by cnc 200 mm︱Z1+Z2 axes controlled by cnc 300-1700 mm︱Number of working hours 41000 h︱Dimensions of machine: ︱length 2600 mm︱width 2000 mm︱height 2900 mm︱weight 9300 kg︱Control Delem DA 69 ︱total power requirement 14 kW︱
            pressure 85 t
            chamfer lenght 2050 mm
            distance between columns 1780 mm
            Stroke beam 365 mm
            600 mm
            350 mm
            Quick speed,inspeed 150 mm/sec
            bendingspeed 0-10 mm/sec
            opening speed 150 mm/sec
            600 mm
            R1 and R2 axis controlled by cnc 200 mm
            Z1+Z2 axes controlled by cnc 300-1700 mm
            Number of working hours 41000 h
            length 2600 mm
            width 2000 mm
            height 2900 mm
            weight 9300 kg
            Control Delem DA 69
            total power requirement 14 kW


        • B&R Service GmbH
        • Esslingerstr.8
        • 73776 Altbach
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT MultiPress 175-40


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021151 · Hydr. pressbrake

          EHT - MultiPress 175-40 - - 2002 -

          Technical details
          pressure 175 t︱chamfer lenght 4050 mm︱distance between columns 3550 mm︱column arm 405 mm︱table height 900 mm︱max. ram stroke 400 mm︱oil volume 320 l︱voltage 3x400 V︱control voltage 24 V︱ 80 A︱dimensions 4600x2000x3400 mm︱total power requirement 18,5 kW︱weight of the machine ca. 14800 kg︱
            pressure 175 t
            chamfer lenght 4050 mm
            distance between columns 3550 mm
            column arm 405 mm
            table height 900 mm
            max. ram stroke 400 mm
            oil volume 320 l
            voltage 3x400 V
            control voltage 24 V
            80 A
            dimensions 4600x2000x3400 mm
            total power requirement 18,5 kW
            weight of the machine ca. 14800 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake TRUMPF TrumaBend V230


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021169 · Hydr. pressbrake

          TRUMPF - TrumaBend V230 - - 2002 -

          Technical details
          pressure 230 t︱chamfer lenght 3060 mm︱distance between columns 2690 mm︱stroke 365 mm︱weight of the machine ca. 17700 kg︱
            pressure 230 t
            chamfer lenght 3060 mm
            distance between columns 2690 mm
            stroke 365 mm
            weight of the machine ca. 17700 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT MultiPress 175-30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021170 · Hydr. pressbrake

          EHT - MultiPress 175-30 - - 2002 -

          Technical details
          pressure 175 t︱chamfer lenght 3050 mm︱voltage 3x400 V︱control voltage 24 kW︱ 80 A︱frequency 50 Hz︱ DNC 1200PS PressCad18,5 kW︱quantity of oil 350 l︱height of the machine 3360 mm︱weight of the machine ca. 12700 kg︱
            pressure 175 t
            chamfer lenght 3050 mm
            voltage 3x400 V
            control voltage 24 kW
            80 A
            frequency 50 Hz
            DNC 1200PS PressCad
            18,5 kW
            quantity of oil 350 l
            height of the machine 3360 mm
            weight of the machine ca. 12700 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ATLANTIC HPTE 40.200


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96917 · Hydr. pressbrake

          ATLANTIC - HPTE 40.200 - - 2001 - NC ATL 550

          Technical details
          pressure 200 t︱chamfer lenght 4100 mm︱distance between columns 3150 mm︱stroke - stepless adjustable 200 mm︱column arm 300 mm︱table height 1090 mm︱dayligth 450 mm︱working feed 9,0 mm/sec︱return speed 80,0 mm/sec︱Control NC ATL 550 ︱hydraulic 265 bar︱voltage 380 V︱total power requirement 18,7 kW︱weight 15000 kg︱range L-W-H 4400 x 1900 x 3000 mm︱
          Furnishing: - NC controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control ATL 550 * Positioning of backgauge ( X ) * Depth setting positioning ( Y1+Y2 ) * Possibility of programming different programs * Storage capacity max. 200 programs - max. 400 sentences * Pivoting control panel, front left - electric backgauge, on ball screws * with 2 stop fingers, manually adjustable - manual table crowning, with analogue display * Adjustment at the front left, with a hand crank - divided deer foot upper tool 85° - reversible MultiV - universal die block - rear + side protection - 2x front / robust support arms - free-moving 2-hand / double-foot operation - Operation manual
            pressure 200 t
            chamfer lenght 4100 mm
            distance between columns 3150 mm
            stroke - stepless adjustable 200 mm
            column arm 300 mm
            table height 1090 mm
            dayligth 450 mm
            working feed 9,0 mm/sec
            return speed 80,0 mm/sec
            Control NC ATL 550
            hydraulic 265 bar
            voltage 380 V
            total power requirement 18,7 kW
            weight 15000 kg
            range L-W-H 4400 x 1900 x 3000 mm
            Description :
            Furnishing:
            - NC controlled hydraulic press brake, with torsion shaft
            - with ATLANTIC NC control ATL 550
            * Positioning of backgauge ( X )
            * Depth setting positioning ( Y1+Y2 )
            * Possibility of programming different programs
            * Storage capacity max. 200 programs - max. 400 sentences
            * Pivoting control panel, front left
            - electric backgauge, on ball screws
            * with 2 stop fingers, manually adjustable
            - manual table crowning, with analogue display
            * Adjustment at the front left, with a hand crank
            - divided deer foot upper tool 85°
            - reversible MultiV - universal die block
            - rear + side protection
            - 2x front / robust support arms
            - free-moving 2-hand / double-foot operation
            - Operation manual


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ATLANTIC HPTE 40.200


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308224 · Hydr. pressbrake

          ATLANTIC - HPTE 40.200 - - 2001 - NC ATL 550

          Technical details
          pressure 200 t︱chamfer lenght 4100 mm︱distance between columns 3150 mm︱stroke - stepless adjustable 200 mm︱column arm 300 mm︱table height 1090 mm︱dayligth 450 mm︱working feed 9,0 mm/sec︱return speed 80,0 mm/sec︱Control NC ATL 550 ︱hydraulic 265 bar︱voltage 380 V︱total power requirement 18,7 kW︱weight 15000 kg︱range L-W-H 4400 x 1900 x 3000 mm︱
          Furnishing: - NC controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control ATL 550 * Positioning of backgauge ( X ) * Depth setting positioning ( Y1+Y2 ) * Possibility of programming different programs * Storage capacity max. 200 programs - max. 400 sentences * Pivoting control panel, front left - electric backgauge, on ball screws * with 2 stop fingers, manually adjustable - manual table crowning, with analogue display * Adjustment at the front left, with a hand crank - divided deer foot upper tool 85° - reversible MultiV - universal die block - rear + side protection - 2x front / robust support arms - free-moving 2-hand / double-foot operation - Operation manual
            pressure 200 t
            chamfer lenght 4100 mm
            distance between columns 3150 mm
            stroke - stepless adjustable 200 mm
            column arm 300 mm
            table height 1090 mm
            dayligth 450 mm
            working feed 9,0 mm/sec
            return speed 80,0 mm/sec
            Control NC ATL 550
            hydraulic 265 bar
            voltage 380 V
            total power requirement 18,7 kW
            weight 15000 kg
            range L-W-H 4400 x 1900 x 3000 mm
            Description :
            Furnishing:
            - NC controlled hydraulic press brake, with torsion shaft
            - with ATLANTIC NC control ATL 550
            * Positioning of backgauge ( X )
            * Depth setting positioning ( Y1+Y2 )
            * Possibility of programming different programs
            * Storage capacity max. 200 programs - max. 400 sentences
            * Pivoting control panel, front left
            - electric backgauge, on ball screws
            * with 2 stop fingers, manually adjustable
            - manual table crowning, with analogue display
            * Adjustment at the front left, with a hand crank
            - divided deer foot upper tool 85°
            - reversible MultiV - universal die block
            - rear + side protection
            - 2x front / robust support arms
            - free-moving 2-hand / double-foot operation
            - Operation manual


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake LVD PPBL 135/40


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96924 · Hydr. pressbrake

          LVD - PPBL 135/40 - - 2001 - ELGO P8822

          Technical details
          pressure 135 t︱chamfer lenght 4050 mm︱distance between columns 3150 mm︱throat 200 mm︱dayligth 310 mm︱piston stroke 130 mm︱ajustment speed 100 mm/sec︱working feed 8.0 mm/sec︱return speed 65.0 mm/sec︱table width 180 mm︱table height 900 mm︱Control ELGO P8822 ︱pressure 220 bar︱total power requirement 8.5 kW︱weight 8700 kg︱range L-W-H 4500 x 1700 x 2640 mm︱
          ** from a maintenance workshop ** maintained condition (!!) Furnishing: - simple NC electro-hydraulic press brake - with ELGO digital control unit - model "P8822" * Positioning of the back gauge (X axis) * Positioning of the depth adjustment (Y1+Y2 axis) * Swivel control panel, front right - electro-motorized back gauge (X axis) * with digital ELGO position display * 2x manually adjustable stop fingers (R+Z axis) - WILA manual table cambering, with analogue actual value display - split deer foot upper tool: https://www.ukb-gmbh.de/de/16520.html - 1x rotating universal die block. Dimensions 90.0 x 90.0 mm * V openings: 8.0 / 10.0 / 15.0 / 25.0 / 40.0 / 55.0 mm - 1x freely movable 2 hand/foot control - 2x front support arms - Protective device on the side + behind the machine - Operating instructions + circuit diagram (FR)
            pressure 135 t
            chamfer lenght 4050 mm
            distance between columns 3150 mm
            throat 200 mm
            dayligth 310 mm
            piston stroke 130 mm
            ajustment speed 100 mm/sec
            working feed 8.0 mm/sec
            return speed 65.0 mm/sec
            table width 180 mm
            table height 900 mm
            Control ELGO P8822
            pressure 220 bar
            total power requirement 8.5 kW
            weight 8700 kg
            range L-W-H 4500 x 1700 x 2640 mm
            Description :
            ** from a maintenance workshop
            ** maintained condition (!!)

            Furnishing:
            - simple NC electro-hydraulic press brake
            - with ELGO digital control unit - model "P8822"
            * Positioning of the back gauge (X axis)
            * Positioning of the depth adjustment (Y1+Y2 axis)
            * Swivel control panel, front right
            - electro-motorized back gauge (X axis)
            * with digital ELGO position display
            * 2x manually adjustable stop fingers (R+Z axis)
            - WILA manual table cambering, with analogue actual value display
            - split deer foot upper tool: https://www.ukb-gmbh.de/de/16520.html
            - 1x rotating universal die block. Dimensions 90.0 x 90.0 mm
            * V openings: 8.0 / 10.0 / 15.0 / 25.0 / 40.0 / 55.0 mm
            - 1x freely movable 2 hand/foot control
            - 2x front support arms
            - Protective device on the side + behind the machine
            - Operating instructions + circuit diagram (FR)




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake LVD PPBL 135/40


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308370 · Hydr. pressbrake

          LVD - PPBL 135/40 - - 2001 - ELGO P8822

          Technical details
          pressure 135 t︱chamfer lenght 4050 mm︱distance between columns 3150 mm︱throat 200 mm︱dayligth 310 mm︱piston stroke 130 mm︱ajustment speed 100 mm/sec︱working feed 8.0 mm/sec︱return speed 65.0 mm/sec︱table width 180 mm︱table height 900 mm︱Control ELGO P8822 ︱pressure 220 bar︱total power requirement 8.5 kW︱weight 8700 kg︱range L-W-H 4500 x 1700 x 2640 mm︱
          ** from a maintenance workshop ** maintained condition (!!) Furnishing: - simple NC electro-hydraulic press brake - with ELGO digital control unit - model "P8822" * Positioning of the back gauge (X axis) * Positioning of the depth adjustment (Y1+Y2 axis) * Swivel control panel, front right - electro-motorized back gauge (X axis) * with digital ELGO position display * 2x manually adjustable stop fingers (R+Z axis) - WILA manual table cambering, with analogue actual value display - split deer foot upper tool: https://www.ukb-gmbh.de/de/16520.html - 1x rotating universal die block. Dimensions 90.0 x 90.0 mm * V openings: 8.0 / 10.0 / 15.0 / 25.0 / 40.0 / 55.0 mm - 1x freely movable 2 hand/foot control - 2x front support arms - Protective device on the side + behind the machine - Operating instructions + circuit diagram (FR) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308370
            pressure 135 t
            chamfer lenght 4050 mm
            distance between columns 3150 mm
            throat 200 mm
            dayligth 310 mm
            piston stroke 130 mm
            ajustment speed 100 mm/sec
            working feed 8.0 mm/sec
            return speed 65.0 mm/sec
            table width 180 mm
            table height 900 mm
            Control ELGO P8822
            pressure 220 bar
            total power requirement 8.5 kW
            weight 8700 kg
            range L-W-H 4500 x 1700 x 2640 mm
            Description :
            ** from a maintenance workshop
            ** maintained condition (!!)

            Furnishing:
            - simple NC electro-hydraulic press brake
            - with ELGO digital control unit - model "P8822"
            * Positioning of the back gauge (X axis)
            * Positioning of the depth adjustment (Y1+Y2 axis)
            * Swivel control panel, front right
            - electro-motorized back gauge (X axis)
            * with digital ELGO position display
            * 2x manually adjustable stop fingers (R+Z axis)
            - WILA manual table cambering, with analogue actual value display
            - split deer foot upper tool: https://www.ukb-gmbh.de/de/16520.html
            - 1x rotating universal die block. Dimensions 90.0 x 90.0 mm
            * V openings: 8.0 / 10.0 / 15.0 / 25.0 / 40.0 / 55.0 mm
            - 1x freely movable 2 hand/foot control
            - 2x front support arms
            - Protective device on the side + behind the machine
            - Operating instructions + circuit diagram (FR)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308370


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT VarioPress 225-60


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020953 · Hydr. pressbrake

          EHT - VarioPress 225-60 - - 2001 - CYBELEC DNC 1200 PS

          Technical details
          pressure 225 t︱chamfer lenght 6050 mm︱Control CYBELEC DNC 1200 PS ︱total power requirement 18,5 kW︱
            pressure 225 t
            chamfer lenght 6050 mm
            Control CYBELEC DNC 1200 PS
            total power requirement 18,5 kW


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake TRUMPF TrumaBend V 50


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3300045 · Hydr. pressbrake

          TRUMPF - TrumaBend V 50 - - 2001 -

          Technical details
          pressure 50 t︱chamfer lenght 1270 mm︱distance between columns 1040 mm︱stroke 215 mm︱throat 410 mm︱dayligth 385 mm︱back stop - adjustable 860 mm︱working feed 1 - 10 mm/sec︱return speed 135 mm/sec︱total power requirement 8,6 kVA︱weight of the machine ca. 4750 kg︱dimensions of the machine ca. 2000 x 2100 x 2400 mm︱
          - controlled axes: Y1, Y2, X, R - Pneumatic die shift - LAN network connection - 4 stop fingers manually adjustable, foldable to the rear, pneumatic clampable - CNC control, operation on the front left - 2-hand operation / foot switch - rear + side protection
            pressure 50 t
            chamfer lenght 1270 mm
            distance between columns 1040 mm
            stroke 215 mm
            throat 410 mm
            dayligth 385 mm
            back stop - adjustable 860 mm
            working feed 1 - 10 mm/sec
            return speed 135 mm/sec
            total power requirement 8,6 kVA
            weight of the machine ca. 4750 kg
            dimensions of the machine ca. 2000 x 2100 x 2400 mm
            Description :
            - controlled axes: Y1, Y2, X, R
            - Pneumatic die shift
            - LAN network connection
            - 4 stop fingers manually adjustable, foldable to the rear, pneumatic
            clampable
            - CNC control, operation on the front left
            - 2-hand operation / foot switch
            - rear + side protection


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake PLACKE HQPB-6H 210t / 3100 mm


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3300052 · Hydr. pressbrake

          PLACKE - HQPB-6H 210t / 3100 mm - - 2001 - DELEM DA 69

          Technical details
          pressure 210 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱dayligth 490 mm︱throat 350 mm︱stroke 215 mm︱working feed 9,8 mm/sec︱return speed 80 mm/sec︱ajustment speed 130 mm/sec︱work height max. 845 mm︱Control DELEM DA 69 ︱total power requirement 15 kW︱weight of the machine ca. 15 kg︱dimensions of the machine ca. 3880 x 1675 x 3880 mm︱
          - DELEM CNC control DA69 - controlled axes: Y1 + Y2 + X + R + Z1 + Z2 - hydr. bombing device - Electric back stop, travel range 600 mm - hydr. Upper tool holder standard R - hydr. Lower tool holder standard R - front laser protection device FIESSLER - 2x CNC electrically movable stop fingers, foldable - side + rear protection device - 1x set of upper tools - Hand and foot controls - Operation manual
            pressure 210 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            dayligth 490 mm
            throat 350 mm
            stroke 215 mm
            working feed 9,8 mm/sec
            return speed 80 mm/sec
            ajustment speed 130 mm/sec
            work height max. 845 mm
            Control DELEM DA 69
            total power requirement 15 kW
            weight of the machine ca. 15 kg
            dimensions of the machine ca. 3880 x 1675 x 3880 mm
            Description :
            - DELEM CNC control DA69
            - controlled axes: Y1 + Y2 + X + R + Z1 + Z2
            - hydr. bombing device
            - Electric back stop, travel range 600 mm
            - hydr. Upper tool holder standard R
            - hydr. Lower tool holder standard R
            - front laser protection device FIESSLER
            - 2x CNC electrically movable stop fingers, foldable
            - side + rear protection device
            - 1x set of upper tools
            - Hand and foot controls
            - Operation manual


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT VarioPress 300-30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021124 · Hydr. pressbrake

          EHT - VarioPress 300-30 - - 2001 - CYBELEC Visitouch

          Technical details
          pressure 300 t︱chamfer lenght 3050 mm︱quantity of oil 400 l︱dimensions 4550x3000x3700 mm︱weight 19000 kg︱Control CYBELEC Visitouch
            pressure 300 t
            chamfer lenght 3050 mm
            quantity of oil 400 l
            dimensions 4550x3000x3700 mm
            weight 19000 kg
            Control CYBELEC Visitouch


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake TRUMPF TrumaBend V 200


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100446 · Hydr. pressbrake

          TRUMPF - TrumaBend V 200 - - 2001 -

          Technical details
          Power max. 2000 kN︱Working width max. 4080 mm︱Width betw. Frames 3680 mm︱Throat C-Frame 410 mm︱Max tool high 535 mm︱Stroke maximum 365 mm︱Way back gauge X 600 mm︱max. backgauge X 860 mm︱working hours total 57901 Std.︱
          The machine is in good condition. Option 1: Partitially overhauling of the machine with documentation. Surcharge 7.500 €, / time of delivery + 2 weeks Option 2: Workshopoverhauling of the machine with documentation, 6 month cost free delivery of spareparts. Surcharge 15.000 €, / time of delivery + 3 weeks Standard equipment: - Stable machine frame as a welded construction in all-steel construction - Pressure bar with high flexural strength - Electrohydraulic top drive via proportional valves - Modern block hydraulics - CNC rear stop with rack and pinion drive, for X and R axis, risk-free shifting of the stop fingers from the front - "Modufix" upper tool holder system, manual - Lower tool holder for EV dies, manual clamping, programmable displacement - Security device
            Power max. 2000 kN
            Working width max. 4080 mm
            Width betw. Frames 3680 mm
            Throat C-Frame 410 mm
            Max tool high 535 mm
            Stroke maximum 365 mm
            Way back gauge X 600 mm
            max. backgauge X 860 mm
            working hours total 57901 Std.
            Description :
            The machine is in good condition.
            Option 1:
            Partitially overhauling of the machine with documentation.
            Surcharge 7.500 €, / time of delivery + 2 weeks

            Option 2:
            Workshopoverhauling of the machine with documentation, 6 month cost free delivery of spareparts.
            Surcharge 15.000 €, / time of delivery + 3 weeks

            Standard equipment:

            - Stable machine frame as a welded construction in all-steel construction
            - Pressure bar with high flexural strength
            - Electrohydraulic top drive via proportional valves
            - Modern block hydraulics
            - CNC rear stop with rack and pinion drive, for X and R axis, risk-free shifting of the stop fingers from the front
            - "Modufix" upper tool holder system, manual
            - Lower tool holder for EV dies, manual clamping, programmable displacement
            - Security device


        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake 100GASPARINI PBS 105


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003393 · Hydr. pressbrake

          100GASPARINI - PBS 105 - - 2000 - DELEM DA 65

          Technical details
          pressure 105 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱table width 100 mm︱table height 750 mm︱Control DELEM DA 65 ︱dayligth 200 mm︱working feed 0 - 10 mm/sec︱return speed 0-100 mm/sec︱rapid traverse - up max. 100 mm/sec︱voltage 380 V / 50 Hz︱total power requirement 11 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. 4 x 2,2 x 2,8 m︱
          Equipment: • CNC-control DELEM DA65 graphic video • manual back-off turning • upper and lower tool • 2 manual control / foot switch
            pressure 105 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            table width 100 mm
            table height 750 mm
            Control DELEM DA 65
            dayligth 200 mm
            working feed 0 - 10 mm/sec
            return speed 0-100 mm/sec
            rapid traverse - up max. 100 mm/sec
            voltage 380 V / 50 Hz
            total power requirement 11 kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. 4 x 2,2 x 2,8 m
            Description :
            Equipment:
            • CNC-control DELEM DA65 graphic video
            • manual back-off turning
            • upper and lower tool
            • 2 manual control / foot switch


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake AMADA HFE 50-20


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308383 · Hydr. pressbrake

          AMADA - HFE 50-20 - - 2000 -

          Technical details
          pressure 50.0 t︱chamfer lenght 2090 mm︱distance between columns 1665 mm︱column arm 400 mm︱table width 60,0 mm︱ajustment speed 100 mm/sec︱working feed 10.0 mm/sec︱return speed 100 mm/sec︱stroke 200 mm︱table height 910 mm︱dayligth 470 mm︱Number of working hours 27.900 h︱total power requirement 6.0 KW︱weight of the machine ca. 4850 kg︱range L-W-H 3458 x 2450 x 2450 mm︱
          ** maintained condition (!!) ** with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) * incl. SICK safety device - light barrier - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308383 * Machinevideo : https://www.youtube.com/watch?v=lzJmJ7FbpO4
            pressure 50.0 t
            chamfer lenght 2090 mm
            distance between columns 1665 mm
            column arm 400 mm
            table width 60,0 mm
            ajustment speed 100 mm/sec
            working feed 10.0 mm/sec
            return speed 100 mm/sec
            stroke 200 mm
            table height 910 mm
            dayligth 470 mm
            Number of working hours 27.900 h
            total power requirement 6.0 KW
            weight of the machine ca. 4850 kg
            range L-W-H 3458 x 2450 x 2450 mm
            Description :
            ** maintained condition (!!)
            ** with only approx. 27.900 operating hours

            Furnishing:
            - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2)
            * swiveling operation - front left
            - CNC-controlled back gauge adjustment (X1+X2)
            - CNC-controlled vertical adjustment of the stop fingers (R1+R2)
            - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
            - Hand control device for manual movement of the axes
            - AMADA manual upper tool clamping system
            - 1x freely movable foot switch
            - side protection device (pivoting doors)
            * incl. SICK safety device - light barrier
            - rear protection device (pivoting door)
            - EMERGENCY stop button at the front
            - CE marking
            - original instruction manual

            * Special accessories included:
            - 1x brand new ROLLERI upper tool set (divided)
            * TYPE PS.135.85.R08
            - 1x brand new ROLLERI lower tool set (divided)
            * TYPE M.460.R

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308383

            * Machinevideo :
            https://www.youtube.com/watch?v=lzJmJ7FbpO4


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake PLACKE QPB-4 100/2550, Delem DA 66-T


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12317 · Hydr. pressbrake

          PLACKE - QPB-4 100/2550, Delem DA 66-T - - 2000 - Delem DA-66T

          Technical details
          pressure 100 t︱chamfer lenght 2550 mm︱distance between columns 2050 mm︱Control Delem DA-66T ︱throat 255 mm︱ram stroke 215 mm︱dayligth 530 mm︱rapid traverse - down 150 mm/sec︱press speed 1 - 9,8 mm/sec︱return speed 80 mm/sec︱power capacity 7,5 kW︱tank contens 228 l︱sound - pressure - turn off level ca. max. >70 dB︱connected load 12 kW︱weight of the machine ca. 7 t︱dimensions of the machine ca. 2,9 x 1,6 x 2,8 m︱Electric 400 Volt ︱Foot switch ︱Light barrier in front ︱Matrize im Stück
          Hydraulic press brake with updated CNC control Delem DA-66T, controlled backgauge in the axes X and R as well as Z manually with 4 stop fingers, hydr. Modufix tool clamping, Lasersafe, Wila crowning. Continuous, cranked upper tool and die single V as you see in the video. X-axis back gauge 580 mm, max. 300 mm/sec, accuracy +/-0.05 mm. R-axis stop vertical 200 mm, 150 mm/sec, accuracy +/-0.05 mm. Z-axis stop button transverse, manual 1620 mm. Machine is being sold due to production change. The last test took place in 02/ 23 and was free of defects. Machine dealer with own stock of 1600 m²
            pressure 100 t
            chamfer lenght 2550 mm
            distance between columns 2050 mm
            Control Delem DA-66T
            throat 255 mm
            ram stroke 215 mm
            dayligth 530 mm
            rapid traverse - down 150 mm/sec
            press speed 1 - 9,8 mm/sec
            return speed 80 mm/sec
            power capacity 7,5 kW
            tank contens 228 l
            sound - pressure - turn off leve. >70 dB
            connected load 12 kW
            weight of the machine ca. 7 t
            dimensions of the machine ca. 2,9 x 1,6 x 2,8 m
            Matrize im Stück
            Description :
            Hydraulic press brake with updated CNC control Delem DA-66T,
            controlled backgauge in the axes X and R as well as Z manually with 4 stop
            fingers, hydr. Modufix tool clamping, Lasersafe, Wila crowning. Continuous,
            cranked upper tool and die single V as you see in the video.
            X-axis back gauge 580 mm, max. 300 mm/sec, accuracy +/-0.05 mm.
            R-axis stop vertical 200 mm, 150 mm/sec, accuracy +/-0.05 mm.
            Z-axis stop button transverse, manual 1620 mm.
            Machine is being sold due to production change. The last test took place in 02/
            23 and was free of defects.
            Machine dealer with own stock of 1600 m²


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake TRUMPF TRUMABEND V 130


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96927 · Hydr. pressbrake

          TRUMPF - TRUMABEND V 130 - - 2000 -

          Technical details
          pressure 130 t︱chamfer lenght 3060 mm︱distance between columns 2690 mm︱column arm 410 mm︱stroke 215 mm︱dayligth 385 mm︱ajustment speed 200 mm/sec︱working feed 1-10 mm/sec︱return speed 135 mm/sec︱table width 120 mm︱table height 1050 mm︱tiltable up to +/- 10 mm︱Number of working hours 39.700 h︱compressed air 5,0 - 7,0 bar︱oil volume 250 l︱operating pressure 340 bar︱voltage 400 V︱total power requirement 16.0 KVA︱weight of the machine ca. 11250 kg︱range L-W-H 3640 x 2210 x 2375 mm︱
          Furnishing: - CNC electro-hydraulic die bending press - including DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic matrix displacement (I axis) - WILA manual table crowning, including analogue value display - TRUMPF hydraulic upper tool clamping - TRUMPF manual lower tool clamping - 1x freely movable 2 hand / foot control - Rear safety device (sliding door) - Safety device on the side (pivoting door) - electric Machine circuit diagram (ENG)
            pressure 130 t
            chamfer lenght 3060 mm
            distance between columns 2690 mm
            column arm 410 mm
            stroke 215 mm
            dayligth 385 mm
            ajustment speed 200 mm/sec
            working feed 1-10 mm/sec
            return speed 135 mm/sec
            table width 120 mm
            table height 1050 mm
            tiltable up to +/- 10 mm
            Number of working hours 39.700 h
            compressed air 5,0 - 7,0 bar
            oil volume 250 l
            operating pressure 340 bar
            voltage 400 V
            total power requirement 16.0 KVA
            weight of the machine ca. 11250 kg
            range L-W-H 3640 x 2210 x 2375 mm
            Description :
            Furnishing:
            - CNC electro-hydraulic die bending press
            - including DELEM CNC control model DA 65
            * Swivel control panel, front left
            * 2D graphical programming & product display
            * Tool & program library
            - CNC controlled axes:
            * Y1 + Y2 / X / R / Z1 + Z2 / I axis
            - CNC controlled back gauge (X axis)
            - CNC controlled height adjustment from the back gauge (R axis)
            - CNC controlled adjustment of the stop fingers (Z axis)
            - CNC controlled, pneumatic matrix displacement (I axis)
            - WILA manual table crowning, including analogue value display
            - TRUMPF hydraulic upper tool clamping
            - TRUMPF manual lower tool clamping
            - 1x freely movable 2 hand / foot control
            - Rear safety device (sliding door)
            - Safety device on the side (pivoting door)
            - electric Machine circuit diagram (ENG)




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ATLANTIC HPT 200136


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96884 · Hydr. pressbrake

          ATLANTIC - HPT 200136 - - 2000 -

          Technical details
          pressure 200 t︱chamfer lenght 3660 mm︱distance between columns mm︱Control ︱total power requirement kW︱weight of the machine ca. 13,50 t︱dimensions of the machine ca. m︱
          • 2 stop fingers, can be moved laterally • Block die with: V75, V50, V40, V25, V20, V10 (V50 and V25 defective at approx. 10cm in the middle) • Straight punch, height 200mm, length 3000mm, segmented • ATL 500 control for immersion depth (Y) and back gauge (X) • Centrally adjustable crowning • 2 support arms • Operation manual
            pressure 200 t
            chamfer lenght 3660 mm
            weight of the machine ca. 13,50 t
            Description :
            • 2 stop fingers, can be moved laterally
            • Block die with: V75, V50, V40, V25, V20, V10
            (V50 and V25 defective at approx. 10cm in the middle)
            • Straight punch, height 200mm, length 3000mm, segmented
            • ATL 500 control for immersion depth (Y) and back gauge (X)
            • Centrally adjustable crowning
            • 2 support arms
            • Operation manual


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake AMADA HFE 50-20


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96934 · Hydr. pressbrake

          AMADA - HFE 50-20 - - 2000 -

          Technical details
          pressure 050 t︱chamfer lenght 2090 mm︱distance between columns 1665 mm︱column arm 400 mm︱table width 60,0 mm︱ajustment speed 100 mm/sec︱working feed 10.0 mm/sec︱return speed 100 mm/sec︱stroke 200 mm︱table height 910 mm︱dayligth 470 mm︱Number of working hours 27.900 h︱total power requirement 6.0 KW︱weight of the machine ca. 4850 kg︱range L-W-H 3458 x 2450 x 2450 mm︱
          ** maintained condition (!!) ** with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) * incl. SICK safety device - light barrier - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R
            pressure 050 t
            chamfer lenght 2090 mm
            distance between columns 1665 mm
            column arm 400 mm
            table width 60,0 mm
            ajustment speed 100 mm/sec
            working feed 10.0 mm/sec
            return speed 100 mm/sec
            stroke 200 mm
            table height 910 mm
            dayligth 470 mm
            Number of working hours 27.900 h
            total power requirement 6.0 KW
            weight of the machine ca. 4850 kg
            range L-W-H 3458 x 2450 x 2450 mm
            Description :
            ** maintained condition (!!)
            ** with only approx. 27.900 operating hours

            Furnishing:
            - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2)
            * swiveling operation - front left
            - CNC-controlled back gauge adjustment (X1+X2)
            - CNC-controlled vertical adjustment of the stop fingers (R1+R2)
            - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
            - Hand control device for manual movement of the axes
            - AMADA manual upper tool clamping system
            - 1x freely movable foot switch
            - side protection device (pivoting doors)
            * incl. SICK safety device - light barrier
            - rear protection device (pivoting door)
            - EMERGENCY stop button at the front
            - CE marking
            - original instruction manual

            * Special accessories included:
            - 1x brand new ROLLERI upper tool set (divided)
            * TYPE PS.135.85.R08
            - 1x brand new ROLLERI lower tool set (divided)
            * TYPE M.460.R



        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake DURMA CNC HAP 35160


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021115 · Hydr. pressbrake

          DURMA - CNC HAP 35160 - - 2000 -

          Technical details
          pressure 160 t︱chamfer lenght 3550 mm︱stroke 200 mm︱quantity of oil 150 l︱weight of the machine ca. 11400 kg︱dimensions of the machine ca. 4700x2100x2700 mm︱
          Equipment: - controlled axes Y1, Y2, X, R - motorized crowning - foot switch - Delem DA65 control unit - 2x man. stop fingers - Amada /Promecam tool holder
            pressure 160 t
            chamfer lenght 3550 mm
            stroke 200 mm
            quantity of oil 150 l
            weight of the machine ca. 11400 kg
            dimensions of the machine ca. 4700x2100x2700 mm
            Description :
            Equipment:
            - controlled axes Y1, Y2, X, R
            - motorized crowning
            - foot switch
            - Delem DA65 control unit
            - 2x man. stop fingers
            - Amada /Promecam tool holder


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ATLANTIC HPE 50 230


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-1626 · Hydr. pressbrake

          ATLANTIC - HPE 50 230 - - 2000 -

          Technical details
          pressure 230 t︱chamfer lenght 5000 mm︱distance between columns 4050 mm︱ 800 mm︱ 500 mm︱ 300 mm︱ 600 mm︱ BC 45 Grafik18,7 kW︱ 22,0 t︱ 6,0 x 2,2 x 3,75 m︱
          - 4 stop fingers - Crowning device - Adjustment of the finger height manually via crank 140 mm - Groove in the front of the table - various tools
            pressure 230 t
            chamfer lenght 5000 mm
            distance between columns 4050 mm
            800 mm
            500 mm
            300 mm
            600 mm
            BC 45 Grafik
            18,7 kW
            22,0 t
            6,0 x 2,2 x 3,75 m
            Description :
            - 4 stop fingers
            - Crowning device
            - Adjustment of the finger height manually via crank 140 mm
            - Groove in the front of the table
            - various tools


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EcoPress 175-40


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021159 · Hydr. pressbrake

          EHT - EcoPress 175-40 - - 2000 - DNC 1200 PS

          Technical details
          pressure 175 t︱chamfer lenght 4050 mm︱Control DNC 1200 PS ︱weight of the machine ca. kg︱
            pressure 175 t
            chamfer lenght 4050 mm
            Control DNC 1200 PS


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          • 8  
          • 9  
          •   
          •