,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Crank Press - Double Column

          Machinelist: Crank Press - Double Column


          Crank Press - Double Column

          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173051 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱distance between columns 3640 mm︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱ram surface 3600 x 2500 mm︱ram adjustment 400 mm︱band width 2000 mm︱material thickness 0,6 - 2,5 mm︱material cross-cut 1600 x 2,5 mm²︱coil weight 35,0 t︱Number of Straightening rolls 13 0︱straightening roll diameter 50 mm︱
          Blanking / Cutting Line consisting of: - mechanical double column press make Schuler type EBS 4-600, yom 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking - moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available
            pressure 600 t
            distance between columns 3640 mm
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            band width 2000 mm
            material thickness 0,6 - 2,5 mm
            material cross-cut 1600 x 2,5 mm²
            coil weight 35,0 t
            Number of Straightening rolls 13 0
            straightening roll diameter 50 mm
            Description :
            Blanking / Cutting Line consisting of:
            - mechanical double column press make Schuler type EBS 4-600, yom 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            - moving tables (2x) without rails for the moving tables
            - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll
            - coil lifting device
            - extractor device make Schleicher
            - shear
            - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls
            - coil loop bridge
            - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994
            - blank stacker NSM-Magnettechnik
            stored in dismantled condition - Video before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-174004 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱distance between columns 3640 mm︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱hole in the table mm︱die cushion capacity t︱die cushion stroke mm︱table height over floor mm︱ram surface 3600 x 2500 mm︱pressure of ram t︱stroke of drawing ram mm︱ram adjustment 400 mm︱material width mm︱material thickness mm︱material cross-cut mm²︱feed length mm︱power requirement kW︱
          year of manufacture: 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables
            pressure 600 t
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            distance between columns 3640 mm
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            Description :
            year of manufacture: 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            moving tables (2x) without rails for the moving tables


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column BRET 2 PACK 25 B


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163020 · Crank Press - Double Column

          BRET - 2 PACK 25 B - - 1994 - Siemens S 5

          Technical details
          pressure 250 t︱distance between columns 1650 / 1400 mm︱stroke fix 150 mm︱no. of strokes 30 - 75 Hub/min︱dayligth (stroke and adjustment up) 665 mm︱column travel -side 550 mm︱table surface area 1600 x 900 mm︱hole in the table 1000 x 300 mm︱table height over floor 980 mm︱ram surface 1400 x 900 mm︱power requirement 42,0 kW︱weight of the machine ca. 33,00 t︱required space 2,8 x 2,5 x 4,4 m︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8) distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 250 t
            distance between columns 1650 / 1400 mm
            stroke fix 150 mm
            no. of strokes 30 - 75 Hub/min
            dayligth (stroke and adjustment . 665 mm
            column travel -side 550 mm
            table surface area 1600 x 900 mm
            hole in the table 1000 x 300 mm
            table height over floor 980 mm
            ram surface 1400 x 900 mm
            power requirement 42,0 kW
            weight of the machine ca. 33,00 t
            required space 2,8 x 2,5 x 4,4 m
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8)
            distance table - ram without tool changing system approx. 765 mm
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN HU 2-500


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173001 · Crank Press - Double Column

          WEINGARTEN - HU 2-500 - - 1985 - keine / Option neu

          Technical details
          pressure 500 t︱distance between columns 3100 mm︱stroke fix 300 mm︱no. of strokes 20 - 70 Hub/min︱dayligth (stroke and adjustment up) 1000 mm︱column travel -side 1400 mm︱table surface area 2800 x 1600 mm︱hole in the table mm︱table height over floor mm︱ram surface 2800 x 1450 mm︱power requirement 90,0 kW︱weight of the machine ca. 100,00 t︱required space 5,75 x 3,2 x 7,8 m︱ram adjustment 100 mm︱height over floor 6,4 mm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F
            pressure 500 t
            distance between columns 3100 mm
            stroke fix 300 mm
            no. of strokes 20 - 70 Hub/min
            dayligth (stroke and adjustment . 1000 mm
            column travel -side 1400 mm
            table surface area 2800 x 1600 mm
            ram surface 2800 x 1450 mm
            power requirement 90,0 kW
            weight of the machine ca. 100,00 t
            required space 5,75 x 3,2 x 7,8 m
            ram adjustment 100 mm
            height over floor 6,4 mm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column HAULICK RVD 160-1250 R


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-093056 · Crank Press - Double Column

          HAULICK - RVD 160-1250 R - - 1983 - konventionell

          Technical details
          pressure 160 t︱stroke fix 160 mm︱no. of strokes 30 - 120 /min︱distance between columns 1190 mm︱dayligth (stroke and adjustment up) 735 mm︱column travel -side 600 mm︱table surface area 1200 x 1000 mm︱hole in the table 500 x 300 mm︱table height over floor 900 mm︱ram surface 1000 x 800 mm︱ram adjustment 125 mm︱material width 550 mm︱material thickness 0 - 6,0 mm︱material cross-cut 1100 mm²︱feed length 350 mm︱power requirement 45,0 kW︱Weight 25,0 t︱dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90) can only be offered without putting into operation
            pressure 160 t
            stroke fix 160 mm
            no. of strokes 30 - 120 /min
            distance between columns 1190 mm
            dayligth (stroke and adjustment . 735 mm
            column travel -side 600 mm
            table surface area 1200 x 1000 mm
            hole in the table 500 x 300 mm
            table height over floor 900 mm
            ram surface 1000 x 800 mm
            ram adjustment 125 mm
            material width 550 mm
            material thickness 0 - 6,0 mm
            material cross-cut 1100 mm²
            feed length 350 mm
            power requirement 45,0 kW
            Weight 25,0 t
            dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90)
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES VE 100/100


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073112 · Crank Press - Double Column

          DREES - VE 100/100 - - 1980 - konventionell

          Technical details
          pressure 100 t︱stroke 20 - 200 mm︱no. of strokes 20 - 60 /min︱distance between columns 1230 mm︱dayligth (stroke and adjustment up) 650 mm︱column travel -side 540 mm︱table surface area 1050 x 750 mm︱table height over floor 760 mm︱ram surface 1000 x 750 mm︱ram adjustment 100 mm︱power requirement 18,0 kW︱Weight 20,5 t︱dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 100 t
            stroke 20 - 200 mm
            no. of strokes 20 - 60 /min
            distance between columns 1230 mm
            dayligth (stroke and adjustment . 650 mm
            column travel -side 540 mm
            table surface area 1050 x 750 mm
            table height over floor 760 mm
            ram surface 1000 x 750 mm
            ram adjustment 100 mm
            power requirement 18,0 kW
            Weight 20,5 t
            dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN VK 500.34.85


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113100 · Crank Press - Double Column

          WEINGARTEN - VK 500.34.85 - - 1974 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱ram adjustment 350 mm︱height over floor 8,3 mm︱height under floor 6,0 mm︱
          with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device stored in dismantled condition can only be offered without putting into operation
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            ram adjustment 350 mm
            height over floor 8,3 mm
            height under floor 6,0 mm
            Description :
            with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device
            stored in dismantled condition
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES ZE 500/160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083149 · Crank Press - Double Column

          DREES - ZE 500/160 - - 1973 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱
          with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            Description :
            with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column RICHTER STZZRR 160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083144 · Crank Press - Double Column

          RICHTER - STZZRR 160 - - 1965 - konventionell

          Technical details
          pressure 160 t︱stroke 15 - 170 mm︱no. of strokes 15 - 40 /min︱distance between columns 2050 / 1900 mm︱dayligth (stroke and adjustment up) 690 mm︱column travel -side 800 mm︱table surface area 1600 x 800 mm︱hole in the table mm︱table height over floor 900 mm︱ram surface 1620 x 700 mm︱ram adjustment 140 mm︱power requirement 15,0 kW︱Weight 24,0 t︱dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm︱total height over floor 4,8 m︱height under floor 0,5 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation
            pressure 160 t
            stroke 15 - 170 mm
            no. of strokes 15 - 40 /min
            distance between columns 2050 / 1900 mm
            dayligth (stroke and adjustment . 690 mm
            column travel -side 800 mm
            table surface area 1600 x 800 mm
            table height over floor 900 mm
            ram surface 1620 x 700 mm
            ram adjustment 140 mm
            power requirement 15,0 kW
            Weight 24,0 t
            dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm
            total height over floor 4,8 m
            height under floor 0,5 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Double Column Drawing Press - Hydraulic

          used Presses Double Column Drawing Press - Hydraulic LOIRE ESLK


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0406 · Double Column Drawing Press - Hydraulic

          LOIRE - ESLK - - 1993 -

          Technical details
          Pressure total 800 t︱Blankholder capacity 500 t︱Stroke 750 mm︱Daylight 1900 mm︱Table surface area 2800 x 1800 mm︱Die cushion capacity in table 200 t︱Die cushion stroke 280 mm︱Die cushion pad area 2050 x 1600 mm︱Approach speed 300 mm / s︱Working speed 1 - 50 mm / s︱Return speed 220 mm / s︱Oil volume 3000 l︱Height over floor approx. 6500 mm︱Weight of machine approx. 120 t︱
            Pressure total 800 t
            Blankholder capacity 500 t
            Stroke 750 mm
            Daylight 1900 mm
            Table surface area 2800 x 1800 mm
            Die cushion capacity in table 200 t
            Die cushion stroke 280 mm
            Die cushion pad area 2050 x 1600 mm
            Approach speed 300 mm / s
            Working speed 1 - 50 mm / s
            Return speed 220 mm / s
            Oil volume 3000 l
            Height over floor approx. 6500 mm
            Weight of machine approx. 120 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press - Hydraulic EITEL RN 260


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0173 · Double Column Drawing Press - Hydraulic

          EITEL - RN 260 - - 1990 -

          Technical details
          Pressure total 280 t︱Stroke 800 mm︱Daylight 1.600 mm︱Table surface area 2.000 x 1.200 mm︱Die cushion capacity in table 65 t︱Die cushion stroke 350 mm︱Die cushion pad area 1.705 x 920 mm︱Approach speed 15 m / min︱Working speed 0,8 - 2,4 m / min︱Return speed 8,5 m / min︱Height over floor approx. 4.850 mm︱Weight of machine approx. 26 t︱
          In 1990 the press was completely overhauled by LASCO.
            Pressure total 280 t
            Stroke 800 mm
            Daylight 1.600 mm
            Table surface area 2.000 x 1.200 mm
            Die cushion capacity in table 65 t
            Die cushion stroke 350 mm
            Die cushion pad area 1.705 x 920 mm
            Approach speed 15 m / min
            Working speed 0,8 - 2,4 m / min
            Return speed 8,5 m / min
            Height over floor approx. 4.850 mm
            Weight of machine approx. 26 t
            Description :
            In 1990 the press was completely overhauled by LASCO.


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press - Hydraulic SMG HZPU 1400/900 - 3600/2500


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0366 · Double Column Drawing Press - Hydraulic

          SMG - HZPU 1400/900 - 3600/2500 - - 1989 -

          Technical details
          Pressure total 1400 t︱Stroke 950 mm︱Daylight 2000 mm︱Table surface area 3600 x 2500 mm︱Die cushion capacity in table 400 t︱Die cushion stroke 500 mm︱Die cushion pad area 3060 x 1860 mm︱Approach speed 400 mm / s︱Working speed 40 / 80 mm / s︱Return speed 400 mm / s︱Oil volume 5000 l︱Weight of machine approx. 240 t︱
            Pressure total 1400 t
            Stroke 950 mm
            Daylight 2000 mm
            Table surface area 3600 x 2500 mm
            Die cushion capacity in table 400 t
            Die cushion stroke 500 mm
            Die cushion pad area 3060 x 1860 mm
            Approach speed 400 mm / s
            Working speed 40 / 80 mm / s
            Return speed 400 mm / s
            Oil volume 5000 l
            Weight of machine approx. 240 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press - Hydraulic LAUFFER RZU 160


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0169 · Double Column Drawing Press - Hydraulic

          LAUFFER - RZU 160 - - 1988 -

          Technical details
          Pressure total 160 t︱Stroke 500 mm︱Daylight 710 mm︱Free frontal opening L-R 820 mm︱Free lateral opening F-B 320 mm︱Table surface area 800 x 630 mm︱Die cushion capacity in table 63 t︱Die cushion stroke 200 mm︱Die cushion pad area 630 x 450 mm︱Approach speed 400 mm / s︱Working speed 17 - 45 mm / s︱Return speed 230 mm / s︱Weight of machine approx. 13,6 t︱
            Pressure total 160 t
            Stroke 500 mm
            Daylight 710 mm
            Free frontal opening L-R 820 mm
            Free lateral opening F-B 320 mm
            Table surface area 800 x 630 mm
            Die cushion capacity in table 63 t
            Die cushion stroke 200 mm
            Die cushion pad area 630 x 450 mm
            Approach speed 400 mm / s
            Working speed 17 - 45 mm / s
            Return speed 230 mm / s
            Weight of machine approx. 13,6 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press - Hydraulic DUNKES HDS 63


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-450868 · Double Column Drawing Press - Hydraulic

          DUNKES - HDS 63 - - 1987 -

          Technical details
          pressure 63 t︱distance between columns 650 mm︱stroke 200 mm︱total power requirement 30 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            pressure 63 t
            distance between columns 650 mm
            stroke 200 mm
            total power requirement 30 kW


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press - Hydraulic DUNKES HDS 125


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-434175 · Double Column Drawing Press - Hydraulic

          DUNKES - HDS 125 - - 1987 -

          Technical details
          pressure 125 t︱distance between columns 1050 mm︱stroke 250 mm︱total power requirement 40 kW︱weight of the machine ca. 8,5 t︱dimensions of the machine ca. m︱
            pressure 125 t
            distance between columns 1050 mm
            stroke 250 mm
            total power requirement 40 kW
            weight of the machine ca. 8,5 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press - Hydraulic SMG DS 40


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15689 · Double Column Drawing Press - Hydraulic

          SMG - DS 40 - - 1978 -

          Technical details
          pressure 40 t︱distance between columns 600 mm︱stroke 150 mm︱table surface area 600x410 mm︱ram surface 220x130 mm︱table height 850 mm︱weight of the machine ca. 2,5 t︱
            pressure 40 t
            distance between columns 600 mm
            stroke 150 mm
            table surface area 600x410 mm
            ram surface 220x130 mm
            table height 850 mm
            weight of the machine ca. 2,5 t


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact

          Double Column Drawing Press -Hydr.

          used Presses Double Column Drawing Press -Hydr. HYDRAP HPDZB 315 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133008 · Double Column Drawing Press -Hydr.

          HYDRAP - HPDZB 315 (UVV) - - 2018 - Siemens S 7

          Technical details
          Pressure 315 t︱stroke 750 mm︱distance between columns 1700 mm︱Distance table/ram, max. stroke up, adjustment up 1250 mm︱Table surface area 1600 x 1300 mm︱pressure of drawing cushion in table 125 t︱Die cushion stroke in table 350 mm︱Die cushion pressure in ram 1000 x 900 t︱Die cushion stroke in ram mm︱Ram surface 1600 x 1300 mm︱Side window 1100 mm︱feed down 400 mm/s︱feed up 400 mm/s︱working feed 12 - 44 mm/s︱oil volume 2500 l︱power requirement 35,0 kW︱Weight 43,50 t︱dimensions of the machine ca. 3,6 x 3,1 x 6,0 mxmxm︱height over floor 4,9 mm︱height under floor m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning, ram interlocking, controllable dependant on pressure/time and way, two-hand operation new electric control Siemens S 7 (2018) new ligh guard at the front (Sick C 4000) yom 1987 press can be inspected in running condition in our warehouse
            Pressure 315 t
            stroke 750 mm
            distance between columns 1700 mm
            Distance table/ram, max. stroke . 1250 mm
            Table surface area 1600 x 1300 mm
            pressure of drawing cushion in t. 125 t
            Die cushion stroke in table 350 mm
            Die cushion pressure in ram 1000 x 900 t
            Ram surface 1600 x 1300 mm
            Side window 1100 mm
            feed down 400 mm/s
            feed up 400 mm/s
            working feed 12 - 44 mm/s
            oil volume 2500 l
            power requirement 35,0 kW
            Weight 43,50 t
            dimensions of the machine ca. 3,6 x 3,1 x 6,0 mxmxm
            height over floor 4,9 mm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning, ram interlocking, controllable dependant on pressure/time and way, two-hand operation
            new electric control Siemens S 7 (2018)
            new ligh guard at the front (Sick C 4000)
            yom 1987
            press can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MUELLER KEZ 315 - 18/6.1.1 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-153035V · Double Column Drawing Press -Hydr.

          MUELLER - KEZ 315 - 18/6.1.1 (UVV) - - 2010 - Siemens S 7

          Technical details
          pressure 315 t︱distance between columns 1800 mm︱stroke 400 mm︱Distance table/ram, max. stroke up, adjustment up 650 mm︱table surface area 1800 x 1000 mm︱table height over floor 900 mm︱die cushion pressure in table 80 t︱die cushion stroke in table 100 mm︱Die cushion area in table 1300 x 600 mm︱side window 600 mm︱ram surface 1800 x 1000 mm︱speed down 400 mm/s︱speed up 300 mm/s︱working speed 15 - 80 mm/s︱oil volume 1700 l︱power requirement 55,0 kW︱weight 27,5 t︱dimensions (WxDxH) 3,1 x 2,2 x 4,6 m︱
          year of manufacture 1980 modernization 2010 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary can be offered without putting into operation (WITHOUT operator’s console / screen) or alternatively with new control Siemens S 7-1500 F, new operator’s console / screen and new user interface
            pressure 315 t
            distance between columns 1800 mm
            stroke 400 mm
            Distance table/ram, max. stroke . 650 mm
            table surface area 1800 x 1000 mm
            table height over floor 900 mm
            die cushion pressure in table 80 t
            die cushion stroke in table 100 mm
            Die cushion area in table 1300 x 600 mm
            side window 600 mm
            ram surface 1800 x 1000 mm
            speed down 400 mm/s
            speed up 300 mm/s
            working speed 15 - 80 mm/s
            oil volume 1700 l
            power requirement 55,0 kW
            weight 27,5 t
            dimensions (WxDxH) 3,1 x 2,2 x 4,6 m
            Description :
            year of manufacture 1980
            modernization 2010
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, hydraulic drawing cushion in table
            No foundation pit necessary
            can be offered without putting into operation (WITHOUT operator’s console / screen) or alternatively with new control Siemens S 7-1500 F, new operator’s console / screen and new user interface


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MUELLER ZE 315-16.24.1 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-143044 · Double Column Drawing Press -Hydr.

          MUELLER - ZE 315-16.24.1 (CE) - - 2007 - Siemens S 7

          Technical details
          pressure 315 t︱distance between columns 1750 mm︱stroke 700 mm︱distance table/ram, max. stroke up, adjustment up 1200 mm︱table surface area 1600 x 1500 mm︱pressure of drawing cushion in table 125 t︱stroke of drawing cushion in table 200 mm︱die cushion area 1200 x 1400 mm︱table height over floor 750 mm︱ram surface 1640 x 1500 mm︱oil volume l︱power requirement 55,0 + 11,0 kW︱weight 29,5 t︱dimensions (WxDxH) 3,2 x 4,5 x 5,8 m︱Height above floor 5,1 m︱
          year of manufacture 1983 2007: modernization of electrical control (Siemens S 7) permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact cushioning can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F
            pressure 315 t
            distance between columns 1750 mm
            stroke 700 mm
            distance table/ram, max. stroke . 1200 mm
            table surface area 1600 x 1500 mm
            pressure of drawing cushion in t. 125 t
            stroke of drawing cushion in tab. 200 mm
            die cushion area 1200 x 1400 mm
            table height over floor 750 mm
            ram surface 1640 x 1500 mm
            power requirement 55,0 + 11,0 kW
            weight 29,5 t
            dimensions (WxDxH) 3,2 x 4,5 x 5,8 m
            Height above floor 5,1 m
            Description :
            year of manufacture 1983
            2007: modernization of electrical control (Siemens S 7)
            permitted for manual put-in according to the CE Regulations
            with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact cushioning
            can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 1000-40.3.3


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163054A · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 1000-40.3.3 - - 2005 - Siemens S 7

          Technical details
          Pressure 1000 t︱distance between columns 4100 mm︱stroke 1200 mm︱Distance table/ram, stroke up 2100 mm︱Table surface area 4000 x 2200 mm︱pressure of drawing cushion in table 360 t︱Die cushion stroke in table 300 mm︱Die cushion area in table 3500 x 1600 mm︱Die cushion pressure in ram 100 t︱Die cushion stroke in ram 160 mm︱Die cushion area in ram 3250 x 1600 mm︱Ram surface 4000 x 2200 mm︱Side window 1300 mm︱Oil volume 8000 l︱Power capacity 300,0 kW︱Weight t︱Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m︱Height above floor 7,7 m︱
          year of manufacture 1973 modernization 2005 with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Video at seller’s site before dismantling available
            Pressure 1000 t
            distance between columns 4100 mm
            stroke 1200 mm
            Distance table/ram, stroke up 2100 mm
            Table surface area 4000 x 2200 mm
            pressure of drawing cushion in t. 360 t
            Die cushion stroke in table 300 mm
            Die cushion area in table 3500 x 1600 mm
            Die cushion pressure in ram 100 t
            Die cushion stroke in ram 160 mm
            Die cushion area in ram 3250 x 1600 mm
            Ram surface 4000 x 2200 mm
            Side window 1300 mm
            Oil volume 8000 l
            Power capacity 300,0 kW
            Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m
            Height above floor 7,7 m
            Description :
            year of manufacture 1973
            modernization 2005
            with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning
            stored in dismantled condition
            Video at seller’s site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 600 25.4.1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163064A · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 600 25.4.1 - - 2005 - Siemens S 7

          Technical details
          Pressure 600 t︱distance between columns 2600 mm︱stroke 900 mm︱Distance table/ram, max. stroke up, adjustment up 1600 mm︱Table surface area 2500 x 1730 mm︱pressure of drawing cushion in table 250 t︱Die cushion stroke in table 400 mm︱Die cushion area in table 2300 x 1300 mm︱Die cushion pressure in ram 63 t︱Die cushion stroke in ram 160 mm︱Die cushion area in ram 1900 x 1300 mm︱Ram surface 2500 x 1730 mm︱Side window 1100 mm︱Oil volume 3500 l︱Power capacity 200,0 kW︱Weight t︱Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m︱Height above floor 6,4 m︱
          year of manufacture 1974 overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available
            Pressure 600 t
            distance between columns 2600 mm
            stroke 900 mm
            Distance table/ram, max. stroke . 1600 mm
            Table surface area 2500 x 1730 mm
            pressure of drawing cushion in t. 250 t
            Die cushion stroke in table 400 mm
            Die cushion area in table 2300 x 1300 mm
            Die cushion pressure in ram 63 t
            Die cushion stroke in ram 160 mm
            Die cushion area in ram 1900 x 1300 mm
            Ram surface 2500 x 1730 mm
            Side window 1100 mm
            Oil volume 3500 l
            Power capacity 200,0 kW
            Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m
            Height above floor 6,4 m
            Description :
            year of manufacture 1974
            overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz
            with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning
            stored in dismantled condition - Video at seller’s site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER BZE 800-25.3.1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163063A · Double Column Drawing Press -Hydr.

          MÜLLER - BZE 800-25.3.1 - - 2005 - Siemens S 7

          Technical details
          Pressure 800 t︱distance between columns 2560 mm︱stroke 1050 mm︱Distance table/ram, stroke up 1870 mm︱Table surface area 2500 x 1730 mm︱pressure of drawing cushion in table 300 t︱Die cushion stroke in table 395 mm︱Die cushion area in table 2300 x 1300 mm︱Ram surface 2500 x 1730 mm︱Die cushion pressure in ram 63 t︱Die cushion stroke in ram 150 mm︱Side window 1000 mm︱Oil volume 4300 l︱Power capacity 200,0 kW︱Weight t︱Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m︱Height above floor 7,0 m︱
          year of manufacture 1974 overhaul 2005 mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available
            Pressure 800 t
            distance between columns 2560 mm
            stroke 1050 mm
            Distance table/ram, stroke up 1870 mm
            Table surface area 2500 x 1730 mm
            pressure of drawing cushion in t. 300 t
            Die cushion stroke in table 395 mm
            Die cushion area in table 2300 x 1300 mm
            Ram surface 2500 x 1730 mm
            Die cushion pressure in ram 63 t
            Die cushion stroke in ram 150 mm
            Side window 1000 mm
            Oil volume 4300 l
            Power capacity 200,0 kW
            Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m
            Height above floor 7,0 m
            Description :
            year of manufacture 1974
            overhaul 2005
            mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel
            stored in dismantled condition - Video at seller’s site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. SCHULER HYDRAP HPDZb 500


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19511 · Double Column Drawing Press -Hydr.

          SCHULER HYDRAP - HPDZb 500 - - 2000 -

          Technical details
          pressure 500 t︱distance between columns 2500 mm︱stroke 800 mm︱stroke speed 450 mm/s︱main drive motor - kW︱dayligth 400 mm︱table-size 2400 x 1300 mm︱ram surface 2400 x 1300 mm︱weight of tools max. 3000 kg︱electrics - voltage/frequency 380 / 50 V/Hz︱total power requirement 255 kW︱weight of the machine ca. 85 t︱dimensions of the machine ca. -- m︱
          CNC-controlled hydraulic punching and bending press with ASA transfer system - CNC control Siemens S7-400 with Simatic PC FI 15 color screen and error diagnosis
            pressure 500 t
            distance between columns 2500 mm
            stroke 800 mm
            stroke speed 450 mm/s
            main drive motor - kW
            dayligth 400 mm
            table-size 2400 x 1300 mm
            ram surface 2400 x 1300 mm
            weight of tools max. 3000 kg
            electrics - voltage/frequency 380 / 50 V/Hz
            total power requirement 255 kW
            weight of the machine ca. 85 t
            dimensions of the machine ca. -- m
            Description :
            CNC-controlled hydraulic punching and bending press
            with ASA transfer system
            - CNC control Siemens S7-400 with Simatic PC FI 15 color screen and error
            diagnosis


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press -Hydr. MÜLLER ZE 800-35.2.1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163069A · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 800-35.2.1 - - 1998 - konventionell

          Technical details
          Pressure 800 t︱distance between columns 3550 mm︱stroke 1100 mm︱Distance table/ram, max. stroke up, adjustment up 1900 mm︱Table surface area 3500 x 1800 mm︱pressure of drawing cushion in table 350 t︱Die cushion stroke in table 280 mm︱Die cushion pressure in ram 80 t︱Die cushion stroke in ram 160 mm︱Ram surface 3500 x 1800 mm︱Side window 1900 mm︱Power capacity kW︱Weight 100,0 t︱Floor Space (WxD) 5,3 x 4,3 m︱Height above floor 7,3 m︱Height below floor 5,0 - 6,0 m︱
          year of manufacture 1970 overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available
            Pressure 800 t
            distance between columns 3550 mm
            stroke 1100 mm
            Distance table/ram, max. stroke . 1900 mm
            Table surface area 3500 x 1800 mm
            pressure of drawing cushion in t. 350 t
            Die cushion stroke in table 280 mm
            Die cushion pressure in ram 80 t
            Die cushion stroke in ram 160 mm
            Ram surface 3500 x 1800 mm
            Side window 1900 mm
            Weight 100,0 t
            Floor Space (WxD) 5,3 x 4,3 m
            Height above floor 7,3 m
            Height below floor 5,0 - 6,0 m
            Description :
            year of manufacture 1970
            overhaul 1998
            with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table)
            Height beneath floor approx. 5 - 6 m
            stored in dismantled condition - Video at seller’s site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •