,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Internal Grinding Machine

          Machinelist: Internal Grinding Machine


          Cylindrical Grinding Machine - Universal

          used Grinding machines Cylindrical Grinding Machine - Universal KELLENBERGER UEBERHOLUNG 600U,1000U,1500U


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-458 · Cylindrical Grinding Machine - Universal

          KELLENBERGER UEBERHOLUNG - 600U,1000U,1500U - - Seriennummer mailen -

          Technical details
          grinding diameter 99999 mm︱grinding length 99999 mm︱centre height mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          We offer the overhauling of your Kellenberger U-machine. Mail serial number and foto of the machine and you will get an offer.
            grinding diameter 99999 mm
            grinding length 99999 mm
            Description :
            We offer the overhauling of your Kellenberger U-machine.
            Mail serial number and foto of the machine and you will get an offer.


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal KELLENBERGER 1000U BEMA Aktuell


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-5212 · Cylindrical Grinding Machine - Universal

          KELLENBERGER - 1000U BEMA Aktuell - - bis 2012 -

          Technical details
          grinding diameter 250,350,450 mm︱grinding length 1000 mm︱centre height 125,175,225 mm︱grinding wheel diameter 400 mm︱grinding wheel width 50 mm︱bore 127 mm︱ MK5 ︱work piece spindle speed 20-400 U/min︱workpiece spindle - bore mm︱grinding head swivelling 360 °︱grinding spindle head - swivable 180 + - °︱grinding spindle speed 1500,1700,2200 U/min︱ 0,001-0,030 mm/Ø︱ 0-0,95 mm/Ø︱ ±8 °︱longitudinal feed of the table 1300 mm︱table speeds 0,02-6 m/min︱ 130 kg︱ 130 inkl. Spannugkg kg︱ mm︱
          As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Foto von Kürzlich gelieferten Maschinen mit zusätzlichen Optionen wie: -Spritzschutztüren -Kabine x-Achse -Schwenkwinkelanzeige Schleifspindelstock Geometrisch überholt und neu lackiert mit original Elektrik. Maschine hat Zentralschmierung und Rollenführung in der Flachbahn der x-Achse sowie Luftabhebung im Schleifspindelstock serienmäßig. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel Inklusive: -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.
            grinding diameter 250,350,450 mm
            grinding length 1000 mm
            centre height 125,175,225 mm
            grinding wheel diameter 400 mm
            grinding wheel width 50 mm
            bore 127 mm
            MK5
            work piece spindle speed 20-400 U/min
            grinding head swivelling 360 °
            grinding spindle head - swivable 180 + - °
            grinding spindle speed 1500,1700,2200 U/min
            0,001-0,030 mm/Ø
            0-0,95 mm/Ø
            ±8 °
            longitudinal feed of the table 1300 mm
            table speeds 0,02-6 m/min
            130 kg
            130 inkl. Spannugkg kg
            Description :
            As the world’s leading company in Kellenberger overhaul and retrofit we are not
            only able to deliver machines in a quality similar to a new machine and with
            warranty, but we can also offer you the service for your machines.Foto von
            Kürzlich gelieferten Maschinen mit zusätzlichen Optionen wie:

            -Spritzschutztüren
            -Kabine x-Achse
            -Schwenkwinkelanzeige Schleifspindelstock

            Geometrisch überholt und neu lackiert mit original Elektrik.

            Maschine hat Zentralschmierung und Rollenführung in der Flachbahn der x-Achse
            sowie Luftabhebung im Schleifspindelstock serienmäßig.

            -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my

            Optionen:

            -Drehgeber mit digitaler Anzeige im Werkstückspindelstock
            -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung
            mit Spindel möglich)
            -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm
            mit Höhenjustierung.
            -Erhöhung der Spitzenhöhe auf max. 225mm
            -Drehzahlregelung für die Schleifspindel

            Inklusive:

            -Bedienwerkzeug
            -Spannrohr für Futter

            weiteres Zubehör auf Anfrage.



            Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den
            grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015
            genannt.
            Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer
            Gefährdungsbeurteilung nach BetrSichV zu ermitteln.


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal KELLENBERGER 1500U BEMA Aktuell VISION


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-BV1500 · Cylindrical Grinding Machine - Universal

          KELLENBERGER - 1500U BEMA Aktuell VISION - - bis 2012 -

          Technical details
          grinding diameter 350 mm︱grinding length 1500 mm︱centre height 175 mm︱total power requirement kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. m︱
          High-End Kellenberger 1500U Ideal for spindle producer or overhauler -BEMA Internal grinding device with separate, cooled motor. Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when it is in position. A quantum leap in safety -Infinitely variable grinding spindle speed 1000-1500 rpm -Infinitely variable internal grinding spindle speed 0-100%. -Digital display of grinding spindle speeds -Swivelling angle display top table -swivel angle display grinding headstock -Marposs gaper sensor for external grinding only -fluid gating sensor Marposs internal grinding -Center height up to 250mm possible Machine is already delivered. Identical machine can be built with additional with additional options. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.
            grinding diameter 350 mm
            grinding length 1500 mm
            centre height 175 mm
            weight of the machine ca. 3 t
            Description :
            High-End Kellenberger 1500U

            Ideal for spindle producer or overhauler

            -BEMA Internal grinding device with separate, cooled motor.
            Grinding spindle and internal grinding spindle motor electrically interlocked!
            Internal grinding spindle can only be switched on when it is in position.
            A quantum leap in safety
            -Infinitely variable grinding spindle speed 1000-1500 rpm
            -Infinitely variable internal grinding spindle speed 0-100%.
            -Digital display of grinding spindle speeds
            -Swivelling angle display top table
            -swivel angle display grinding headstock
            -Marposs gaper sensor for external grinding only
            -fluid gating sensor Marposs internal grinding
            -Center height up to 250mm possible

            Machine is already delivered.
            Identical machine can be built with additional
            with additional options.


            Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den
            grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015
            genannt.
            Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer
            Gefährdungsbeurteilung nach BetrSichV zu ermitteln.


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal KELLENBERGER 600U BEMA Aktuell


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-5210 · Cylindrical Grinding Machine - Universal

          KELLENBERGER - 600U BEMA Aktuell - - bis 2008 -

          Technical details
          grinding diameter 350,450 mm︱grinding length 600 mm︱centre height 175,225 mm︱grinding wheel diameter 400 mm︱grinding wheel width 50 mm︱bore 127 mm︱ MK5 ︱work piece spindle speed 20-400 U/min︱workpiece spindle - bore mm︱grinding head swivelling 360 °︱grinding spindle head - swivable 180 + - °︱grinding spindle speed 1500,1700,2200 U/min︱ 0,001-0,030 mm/Ø︱ 0-0,95 mm/Ø︱ ±10 °︱longitudinal feed of the table 900 mm︱table speeds 0,02-6 m/min︱ 130 kg︱ 130 inkl. Spannugkg kg︱ mm︱
          As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Foto von bereits gelieferter Maschine mit eventuell anderen Optionen. Maschine hat Zentralschmierung und Rollenführung in der Flachbahn der x-Achse sowie Luftabhebung im Schleifspindelstock serienmäßig. BEMA Standard serienmäßig: -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my -Drehzahlanzeige Schleifspindel -Stufenlose Drehzahl Schleifspindel 70-100% -Stufenlose Drehzahl Innenschleifspindel 70-100% -Werkstückspindelantrieb durch Drehstrommotor stufenlos regelbar über Frequenzumrichter Mögliche Optionen gegen Aufpreis: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Sinuslineal -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel Inklusive: -Bedienwerkzeug -Spannrohr für Futter Natürlich erhalten Sie auf unsere generalüberhalten Maschinen 12 Monate Gewährleistung. (Nur Anrainerstaaten) weiteres Zubehör auf Anfrage. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln
            grinding diameter 350,450 mm
            grinding length 600 mm
            centre height 175,225 mm
            grinding wheel diameter 400 mm
            grinding wheel width 50 mm
            bore 127 mm
            MK5
            work piece spindle speed 20-400 U/min
            grinding head swivelling 360 °
            grinding spindle head - swivable 180 + - °
            grinding spindle speed 1500,1700,2200 U/min
            0,001-0,030 mm/Ø
            0-0,95 mm/Ø
            ±10 °
            longitudinal feed of the table 900 mm
            table speeds 0,02-6 m/min
            130 kg
            130 inkl. Spannugkg kg
            Description :
            As the world’s leading company in Kellenberger overhaul and retrofit we are not
            only able to deliver machines in a quality similar to a new machine and with
            warranty, but we can also offer you the service for your machines.

            Foto von bereits gelieferter Maschine mit eventuell anderen Optionen.

            Maschine hat Zentralschmierung und Rollenführung in der Flachbahn der x-Achse
            sowie Luftabhebung im Schleifspindelstock serienmäßig.

            BEMA Standard serienmäßig:

            -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my
            -Drehzahlanzeige Schleifspindel
            -Stufenlose Drehzahl Schleifspindel 70-100%
            -Stufenlose Drehzahl Innenschleifspindel 70-100%
            -Werkstückspindelantrieb durch Drehstrommotor
            stufenlos regelbar über Frequenzumrichter

            Mögliche Optionen gegen Aufpreis:

            -Drehgeber mit digitaler Anzeige im Werkstückspindelstock
            -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung
            mit Spindel möglich)
            -Sinuslineal
            -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm
            mit Höhenjustierung.
            -Erhöhung der Spitzenhöhe auf max. 225mm
            -Drehzahlregelung für die Schleifspindel

            Inklusive:

            -Bedienwerkzeug
            -Spannrohr für Futter

            Natürlich erhalten Sie auf unsere generalüberhalten Maschinen
            12 Monate Gewährleistung. (Nur Anrainerstaaten)


            weiteres Zubehör auf Anfrage.


            Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den
            grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015
            genannt.
            Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer
            Gefährdungsbeurteilung nach BetrSichV zu ermitteln


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal KELLENBERGER 600U BEMA Advance R


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-5200 · Cylindrical Grinding Machine - Universal

          KELLENBERGER - 600U BEMA Advance R - - bis 1990 -

          Technical details
          grinding diameter 250,350,450 mm︱grinding length 600 mm︱centre height 125,175,225 mm︱grinding wheel diameter 400 mm︱grinding wheel width 50 mm︱bore 127 mm︱ MK5 ︱work piece spindle speed 20-400 U/min︱workpiece spindle - bore mm︱grinding head swivelling 360 °︱grinding spindle head - swivable 180 + - °︱grinding spindle speed 1500,1700,2200 U/min︱ 0,001-0,030 mm/Ø︱ 0-0,95 mm/Ø︱ ±10 °︱longitudinal feed of the table 900 mm︱table speeds 0,02-6 m/min︱ 130 kg︱ 130 inkl. Spannugkg kg︱ mm︱
          As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Overhauled with geometric KELLENBERGER protocoll -2-axis DRO -Paper filtration Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.
            grinding diameter 250,350,450 mm
            grinding length 600 mm
            centre height 125,175,225 mm
            grinding wheel diameter 400 mm
            grinding wheel width 50 mm
            bore 127 mm
            MK5
            work piece spindle speed 20-400 U/min
            grinding head swivelling 360 °
            grinding spindle head - swivable 180 + - °
            grinding spindle speed 1500,1700,2200 U/min
            0,001-0,030 mm/Ø
            0-0,95 mm/Ø
            ±10 °
            longitudinal feed of the table 900 mm
            table speeds 0,02-6 m/min
            130 kg
            130 inkl. Spannugkg kg
            Description :
            As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Overhauled with geometric KELLENBERGER protocoll
            -2-axis DRO
            -Paper filtration
            Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt.
            Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal KELLENBERGER 600U BEMA Advance


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-520 · Cylindrical Grinding Machine - Universal

          KELLENBERGER - 600U BEMA Advance - - bis 1989 -

          Technical details
          grinding diameter 250,350,450 mm︱grinding length 600 mm︱centre height 125,175,225 mm︱grinding wheel diameter 400 mm︱grinding wheel width 50 mm︱bore 127 mm︱ MK5 ︱work piece spindle speed 20-400 U/min︱workpiece spindle - bore mm︱grinding head swivelling 360 °︱grinding spindle head - swivable 180 + - °︱grinding spindle speed 1500,1700,2200 U/min︱ 0,001-0,030 mm/Ø︱ 0-0,95 mm/Ø︱ ±10 °︱longitudinal feed of the table 900 mm︱table speeds 0,02-6 m/min︱ 130 kg︱ 130 inkl. Spannugkg kg︱ mm︱
          As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Geometrisch überholt und neu lackiert mit original Elektrik. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel Inklusive: -Bedienwerkzeug -Spannrohr für Futter -Spitze MK3 -Spitze MK5 -Futterflansch weiteres Zubehör auf Anfrage. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.
            grinding diameter 250,350,450 mm
            grinding length 600 mm
            centre height 125,175,225 mm
            grinding wheel diameter 400 mm
            grinding wheel width 50 mm
            bore 127 mm
            MK5
            work piece spindle speed 20-400 U/min
            grinding head swivelling 360 °
            grinding spindle head - swivable 180 + - °
            grinding spindle speed 1500,1700,2200 U/min
            0,001-0,030 mm/Ø
            0-0,95 mm/Ø
            ±10 °
            longitudinal feed of the table 900 mm
            table speeds 0,02-6 m/min
            130 kg
            130 inkl. Spannugkg kg
            Description :
            As the world’s leading company in Kellenberger overhaul and retrofit we are not
            only able to deliver machines in a quality similar to a new machine and with
            warranty, but we can also offer you the service for your machines.Geometrisch
            überholt und neu lackiert mit original Elektrik.

            -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my

            Optionen:

            -Drehgeber mit digitaler Anzeige im Werkstückspindelstock
            -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung
            mit Spindel möglich)
            -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm
            mit Höhenjustierung.
            -Erhöhung der Spitzenhöhe auf max. 225mm
            -Drehzahlregelung für die Schleifspindel

            Inklusive:

            -Bedienwerkzeug
            -Spannrohr für Futter
            -Spitze MK3
            -Spitze MK5
            -Futterflansch

            weiteres Zubehör auf Anfrage.

            Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den
            grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015
            genannt.
            Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer
            Gefährdungsbeurteilung nach BetrSichV zu ermitteln.


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal KELLENBERGER 1000U BEMA Advance R


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-5202 · Cylindrical Grinding Machine - Universal

          KELLENBERGER - 1000U BEMA Advance R - - bis 1989 -

          Technical details
          grinding diameter 250,350,450 mm︱grinding length 1000 mm︱centre height 125,175,225 mm︱grinding wheel diameter 400 mm︱grinding wheel width 50 mm︱bore 127 mm︱ MK5 ︱work piece spindle speed 20-400 U/min︱workpiece spindle - bore mm︱grinding head swivelling 360 °︱grinding spindle head - swivable 180 + - °︱grinding spindle speed 1500,1700,2200 U/min︱ 0,001-0,030 mm/Ø︱ 0-0,95 mm/Ø︱ ±8 °︱longitudinal feed of the table 1300 mm︱table speeds 0,02-6 m/min︱ 130 kg︱ 130 inkl. Spannugkg kg︱ mm︱
          As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Version R: Maschine hat Zentralschmierung und Rollenführung in der Flachbahn der x-Achse sowie Luftabhebung im Schleifspindelstock. Beispielfoto einer von uns überholten 600U -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel Inklusive: -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage. Overhauled with geometric KELLENBERGER protocoll. Standard with: -2-axis DRO -Paper filtration Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.
            grinding diameter 250,350,450 mm
            grinding length 1000 mm
            centre height 125,175,225 mm
            grinding wheel diameter 400 mm
            grinding wheel width 50 mm
            bore 127 mm
            MK5
            work piece spindle speed 20-400 U/min
            grinding head swivelling 360 °
            grinding spindle head - swivable 180 + - °
            grinding spindle speed 1500,1700,2200 U/min
            0,001-0,030 mm/Ø
            0-0,95 mm/Ø
            ±8 °
            longitudinal feed of the table 1300 mm
            table speeds 0,02-6 m/min
            130 kg
            130 inkl. Spannugkg kg
            Description :
            As the world’s leading company in Kellenberger overhaul and retrofit we are not
            only able to deliver machines in a quality similar to a new machine and with
            warranty, but we can also offer you the service for your machines.Version R:
            Maschine hat Zentralschmierung und Rollenführung in der Flachbahn
            der x-Achse sowie Luftabhebung im Schleifspindelstock.

            Beispielfoto einer von uns überholten 600U

            -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my

            Optionen:

            -Drehgeber mit digitaler Anzeige im Werkstückspindelstock
            -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung
            mit Spindel möglich)
            -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm
            mit Höhenjustierung.
            -Erhöhung der Spitzenhöhe auf max. 225mm
            -Drehzahlregelung für die Schleifspindel

            Inklusive:

            -Bedienwerkzeug
            -Spannrohr für Futter


            weiteres Zubehör auf Anfrage.

            Overhauled with geometric KELLENBERGER protocoll.

            Standard with:
            -2-axis DRO
            -Paper filtration


            Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den
            grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015
            genannt.
            Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer
            Gefährdungsbeurteilung nach BetrSichV zu ermitteln.


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal KELLENBERGER 1000U BEMA Advance


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-5201 · Cylindrical Grinding Machine - Universal

          KELLENBERGER - 1000U BEMA Advance - - bis 1989 -

          Technical details
          grinding diameter 250,350,450 mm︱grinding length 1000 mm︱centre height 125,175,225 mm︱grinding wheel diameter 400 mm︱grinding wheel width 50 mm︱bore 127 mm︱ MK5 ︱work piece spindle speed 20-400 U/min︱workpiece spindle - bore mm︱grinding head swivelling 360 °︱grinding spindle head - swivable 180 + - °︱grinding spindle speed 1500,1700,2200 U/min︱ 0,001-0,030 mm/Ø︱ 0-0,95 mm/Ø︱ ±8 °︱longitudinal feed of the table 1300 mm︱table speeds 0,02-6 m/min︱ 130 kg︱ 130 inkl. Spannugkg kg︱ mm︱
          As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrically overhauled with new paint and original electrics. Foto of a 600U which we already have delivered. -Digital display in 2 axes. Resolution of x-Achse 0,5my Options: -Encoder with digital display in workpiece spindle head -Encoder with digital display in grinding spindle head (Height adjustment with spindle not possible) -New stable internal grinding diameter 80mm oder 100mm with height-adjustment. -Increase the center heigh to max. 225mm -Speed control of the grinding spindle Including:: -Adjustment tool -Draw tube for chucks other accessories on reqeust Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.
            grinding diameter 250,350,450 mm
            grinding length 1000 mm
            centre height 125,175,225 mm
            grinding wheel diameter 400 mm
            grinding wheel width 50 mm
            bore 127 mm
            MK5
            work piece spindle speed 20-400 U/min
            grinding head swivelling 360 °
            grinding spindle head - swivable 180 + - °
            grinding spindle speed 1500,1700,2200 U/min
            0,001-0,030 mm/Ø
            0-0,95 mm/Ø
            ±8 °
            longitudinal feed of the table 1300 mm
            table speeds 0,02-6 m/min
            130 kg
            130 inkl. Spannugkg kg
            Description :
            As the world’s leading company in Kellenberger overhaul and retrofit we are not
            only able to deliver machines in a quality similar to a new machine and with
            warranty, but we can also offer you the service for your machines.


            Geometrically overhauled with new paint and original electrics.

            Foto of a 600U which we already have delivered.

            -Digital display in 2 axes. Resolution of x-Achse 0,5my

            Options:

            -Encoder with digital display in workpiece spindle head
            -Encoder with digital display in grinding spindle head (Height adjustment with
            spindle not possible)

            -New stable internal grinding diameter 80mm oder 100mm
            with height-adjustment.
            -Increase the center heigh to max. 225mm
            -Speed control of the grinding spindle

            Including::

            -Adjustment tool
            -Draw tube for chucks

            other accessories on reqeust


            Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den
            grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015
            genannt.
            Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer
            Gefährdungsbeurteilung nach BetrSichV zu ermitteln.


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal KELLENBERGER 1500U BEMA Advance


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-6201 · Cylindrical Grinding Machine - Universal

          KELLENBERGER - 1500U BEMA Advance - - bis 1989 -

          Technical details
          grinding diameter 250,350,450 mm︱grinding length 1500 mm︱centre height 125,175,225 mm︱grinding wheel diameter 400 mm︱grinding wheel width 50 mm︱bore 127 mm︱ MK5 ︱work piece spindle speed 20-400 U/min︱workpiece spindle - bore mm︱grinding head swivelling 360 °︱grinding spindle head - swivable 180 + - °︱grinding spindle speed 1500,1700,2200 U/min︱ 0,001-0,030 mm/Ø︱ 0-0,95 mm/Ø︱ ± 6 °︱longitudinal feed of the table 1750 mm︱table speeds 0,02-6 m/min︱ 130 kg︱ 130 inkl. Spannugkg kg︱ mm︱
          As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrisch überholt und neu lackiert mit original Elektrik jedoch neuer WSS Antrieb und Regler in Drehstromtechnik. Optional mit Spritzschutztüren und bedienpult vorne siehe Foto 1000U. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Schwenkwinkelanzeige Obertisch -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm Inklusive: -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.
            grinding diameter 250,350,450 mm
            grinding length 1500 mm
            centre height 125,175,225 mm
            grinding wheel diameter 400 mm
            grinding wheel width 50 mm
            bore 127 mm
            MK5
            work piece spindle speed 20-400 U/min
            grinding head swivelling 360 °
            grinding spindle head - swivable 180 + - °
            grinding spindle speed 1500,1700,2200 U/min
            0,001-0,030 mm/Ø
            0-0,95 mm/Ø
            ± 6 °
            longitudinal feed of the table 1750 mm
            table speeds 0,02-6 m/min
            130 kg
            130 inkl. Spannugkg kg
            Description :
            As the world’s leading company in Kellenberger overhaul and retrofit we are not
            only able to deliver machines in a quality similar to a new machine and with
            warranty, but we can also offer you the service for your machines.


            Geometrisch überholt und neu lackiert mit original Elektrik jedoch neuer
            WSS Antrieb und Regler in Drehstromtechnik.

            Optional mit Spritzschutztüren und bedienpult vorne siehe Foto 1000U.


            -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my

            Optionen:

            -Schwenkwinkelanzeige Obertisch
            -Drehgeber mit digitaler Anzeige im Werkstückspindelstock
            -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung
            mit Spindel möglich)
            -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm
            mit Höhenjustierung.
            -Erhöhung der Spitzenhöhe auf max. 225mm


            Inklusive:

            -Bedienwerkzeug
            -Spannrohr für Futter

            weiteres Zubehör auf Anfrage.






            Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den
            grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015
            genannt.
            Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer
            Gefährdungsbeurteilung nach BetrSichV zu ermitteln.


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal KELLENBERGER 1500U BEMA Economic


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-6181 · Cylindrical Grinding Machine - Universal

          KELLENBERGER - 1500U BEMA Economic - - bis 1978 -

          Technical details
          grinding diameter 250,350,450 mm︱grinding length 1500 mm︱centre height 125,175,225 mm︱grinding wheel diameter 400 mm︱grinding wheel width 50 mm︱bore 127 mm︱ MK5 ︱work piece spindle speed 20-400 U/min︱workpiece spindle - bore mm︱grinding head swivelling 360 °︱grinding spindle head - swivable 180 + - °︱grinding spindle speed 1500,1700,2200 U/min︱ 0,001-0,030 mm/Ø︱ 0-0,95 mm/Ø︱ ± 6 °︱longitudinal feed of the table 1750 mm︱table speeds 0,02-6 m/min︱ 130 kg︱ 130 inkl. Spannugkg kg︱ mm︱
          As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Overhauled with geometric KELLENBERGER protocoll. Standard with: -New electric cabinet -New motor for the workpiecespindlehead -2-axis DRO Fotos of a delivered (1000U) machine with following optiones against extra charge: -protection doors -tailstock version Advance. In this case with micro-adjusting -handwheel of the version Advance More options on request: -DRO for swivel angle of workpiecespindlehead -DRO for swivel angle of grinding wheel head -Internal spindle holder with bore up to 100mm -Max center height of 225mm More KELLENBERGER machines: www.bumtg.com Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.
            grinding diameter 250,350,450 mm
            grinding length 1500 mm
            centre height 125,175,225 mm
            grinding wheel diameter 400 mm
            grinding wheel width 50 mm
            bore 127 mm
            MK5
            work piece spindle speed 20-400 U/min
            grinding head swivelling 360 °
            grinding spindle head - swivable 180 + - °
            grinding spindle speed 1500,1700,2200 U/min
            0,001-0,030 mm/Ø
            0-0,95 mm/Ø
            ± 6 °
            longitudinal feed of the table 1750 mm
            table speeds 0,02-6 m/min
            130 kg
            130 inkl. Spannugkg kg
            Description :
            As the world’s leading company in Kellenberger overhaul and retrofit we are not
            only able to deliver machines in a quality similar to a new machine and with
            warranty, but we can also offer you the service for your machines.

            Overhauled with geometric KELLENBERGER protocoll.

            Standard with:

            -New electric cabinet
            -New motor for the workpiecespindlehead
            -2-axis DRO



            Fotos of a delivered (1000U) machine with following optiones against extra
            charge:

            -protection doors
            -tailstock version Advance. In this case with micro-adjusting
            -handwheel of the version Advance

            More options on request:

            -DRO for swivel angle of workpiecespindlehead
            -DRO for swivel angle of grinding wheel head
            -Internal spindle holder with bore up to 100mm
            -Max center height of 225mm

            More KELLENBERGER machines:

            www.bumtg.com


            Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den
            grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015
            genannt.
            Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer
            Gefährdungsbeurteilung nach BetrSichV zu ermitteln.


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal BLOHM Profimat MC 610 S


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17697 · Cylindrical Grinding Machine - Universal

          BLOHM - Profimat MC 610 S - - 2010 - SINUMERIK 840 D

          Technical details
          grinding length 1025 mm︱grinding width 520 mm︱workpiece height - mm︱Control SINUMERIK 840 D ︱tool taper HSK-A 63 ︱A - axis + 110 / - 5 °︱workpiece weight 30 kg︱distance grinding spindle - table min./max. 473,5 - 1023,5 mm︱x-axis 520 mm︱y-axis 550 mm︱z-axis 1000 mm︱V-axis 166 mm︱feed x-axis 4 - 6.000 mm/min︱feed y- axis 4 - 4.000 mm/min︱Feed z- axis 30 - 25.000 mm / min.︱table dimensions 1.400 x 874 mm︱spindle speeds (infinitely variable) 0 - 12.000 U/min︱power capacity - grinding motor 35,00 kW︱grinding wheel diam. min/max. 60 / 100 ︱grinding wheel width 20 mm︱
          5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool changer), fire extinguishing device, Renishaw probe prepared without coolant device - was connected to the central supply.
            grinding length 1025 mm
            grinding width 520 mm
            workpiece height - mm
            Control SINUMERIK 840 D
            tool taper HSK-A 63
            A - axis + 110 / - 5 °
            workpiece weight 30 kg
            distance grinding spindle - tabl. 473,5 - 1023,5 mm
            x-axis 520 mm
            y-axis 550 mm
            z-axis 1000 mm
            V-axis 166 mm
            feed x-axis 4 - 6.000 mm/min
            feed y- axis 4 - 4.000 mm/min
            Feed z- axis 30 - 25.000 mm / min.
            table dimensions 1.400 x 874 mm
            spindle speeds (infinitely varia. 0 - 12.000 U/min
            power capacity - grinding motor 35,00 kW
            grinding wheel diam. min/max. 60 / 100
            grinding wheel width 20 mm
            Description :
            5 Axis Profile grinding machine, with SIEMENS SIN840D,
            double dividing head (B-C axis), V-axis (coolant nozzles),
            EROWA tool changing device (machine can also be operated without
            a tool changer), fire extinguishing device,
            Renishaw probe prepared
            without coolant device - was connected to the central supply.


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal STUDER S33


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-8282 · Cylindrical Grinding Machine - Universal

          STUDER - S33 - - 2010 -

          Technical details
          grinding diameter 350 mm︱grinding length 650 mm︱centre height 175 mm︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Machine in very good condition run in one shift (20,000 switch-on hours). Available from January 2024 Fanuc 0i-TD control system Centre distance 650mm Centre height 175mm Workpiece table swivelling +8.5° with fine adjustment and pneumatic lift-off Cross axis X travel 285mm Feed rate 0.001-10,000mm/min Direct, linear absolute measuring system, resolution 0.0001mm Longitudinal axis Z Travel 800mm Feed rate 0.001-20,000mm/min Direct, linear absolute measuring system, resolution 0.0001mm H1 wheelhead with B-axis and 1° Hirth serration Three tool positions Swivelling range -15 to +225° Pos T2 - External grinding with grinding discs Ø500x80x203mm Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s Cone 1:10, nominal Ø 63mm Pos T2 - External grinding 30° with grinding discs Ø500x80x203mm Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s Cone 1:10, nominal Ø 63mm Swivelling measuring probe Pos T3 - Internal grinding unit with high frequency grinding spindle Ø120mm Motor spindle Fischer MFM 24'-42'000 rpm, 15kW, mounting HJND 21 with oil-air lubrication and water cooling Dressing device, not controlled, movable in X, with dressing tool holder for 2 dressing tools MK1, height-adjustable Workpiece headstock, mounting cone MK4 Spindle nose Ø 70mm, spindle passage Ø 26mm Manual spindle locking, without monitoring C-axis, accuracy +/- 0.5° Workpiece drive 3kW, speed 1-1,500 rpm Pneumatic lifting Equipment: Dittel S6000 electronic grinding detection system with gauging sensors on both table and headstock Accessories: 2-circuit hydraulics 3nine sanding mist extraction system Automatic paper belt filter Flow feed, pumps and tank 375 litres Water cooling circuit 100 litres for sanding drives Documentation
            grinding diameter 350 mm
            grinding length 650 mm
            centre height 175 mm
            Description :
            Machine in very good condition
            run in one shift (20,000 switch-on hours).

            Available from January 2024

            Fanuc 0i-TD control system


            Centre distance 650mm
            Centre height 175mm
            Workpiece table swivelling +8.5° with fine adjustment and pneumatic lift-off

            Cross axis X travel 285mm
            Feed rate 0.001-10,000mm/min
            Direct, linear absolute measuring system, resolution 0.0001mm

            Longitudinal axis Z Travel 800mm
            Feed rate 0.001-20,000mm/min
            Direct, linear absolute measuring system, resolution 0.0001mm

            H1 wheelhead with B-axis and 1° Hirth serration
            Three tool positions
            Swivelling range -15 to +225°

            Pos T2 - External grinding with grinding discs Ø500x80x203mm
            Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s
            Cone 1:10, nominal Ø 63mm

            Pos T2 - External grinding 30° with grinding discs Ø500x80x203mm
            Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s
            Cone 1:10, nominal Ø 63mm
            Swivelling measuring probe

            Pos T3 - Internal grinding unit with high frequency grinding spindle Ø120mm
            Motor spindle Fischer MFM 24'-42'000 rpm, 15kW, mounting HJND 21
            with oil-air lubrication and water cooling

            Dressing device, not controlled, movable in X,
            with dressing tool holder for 2 dressing tools MK1, height-adjustable

            Workpiece headstock, mounting cone MK4
            Spindle nose Ø 70mm, spindle passage Ø 26mm
            Manual spindle locking, without monitoring
            C-axis, accuracy +/- 0.5°
            Workpiece drive 3kW, speed 1-1,500 rpm
            Pneumatic lifting


            Equipment:
            Dittel S6000 electronic grinding detection system
            with gauging sensors on both table and headstock


            Accessories:
            2-circuit hydraulics
            3nine sanding mist extraction system
            Automatic paper belt filter Flow feed, pumps and tank 375 litres
            Water cooling circuit 100 litres for sanding drives
            Documentation



        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal STÖCKEL RSU 100 NC-T


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-4959 · Cylindrical Grinding Machine - Universal

          STÖCKEL - RSU 100 NC-T - - 2010 -

          Technical details
          grinding diameter 300 mm︱grinding length 1000 mm︱centre height 150 mm︱total power requirement 6 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 5 x 3 x 2,2 m︱
            grinding diameter 300 mm
            grinding length 1000 mm
            centre height 150 mm
            total power requirement 6 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 5 x 3 x 2,2 m


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal KELLENBERGER 1000U BEMA Aktuell


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-8213 · Cylindrical Grinding Machine - Universal

          KELLENBERGER - 1000U BEMA Aktuell - - 2007 -

          Technical details
          grinding diameter 350/500 mm︱grinding length 1000 mm︱centre height 175,250 mm︱grinding wheel diameter 400 mm︱grinding wheel width 50 mm︱bore 127 mm︱ MK5 ︱work piece spindle speed 6-600 U/min︱workpiece spindle - bore mm︱grinding head swivelling 360 °︱grinding spindle head - swivable 180 + - °︱grinding spindle speed 1500,1700,2200 U/min︱ 0,001-0,030 mm/Ø︱ 0-0,95 mm/Ø︱ ±9 °︱longitudinal feed of the table 1300 mm︱table speeds 0,02-6 m/min︱ 130 kg︱ 130 inkl. Spannugkg kg︱ mm︱
          Nahezu neuwertige Maschine mit original CE. Vor Auslieferung erhält sie eine große Wartung und eine neue Geometrie nach Kellenberger Abnahmeprotokoll. Gewährleistung wie 12 Monate ab Lieferung. 2-Achs Digitalanzeige Heidenhain zusätzlichen Optionen wie: -Spritzschutztüren -Kabine x-Achse -Schwenkwinkelanzeige Schleifspindelstock -Schwenkwinkelanzeige Werkstückspindelstock -Schwenkwinkelanzeige Obertisch -Erhöhung der Spitzenhöhe auf max. 250mm -Drehzahlregelung für die Schleifspindel Gegen Aufpreis. Maschine hat Zentralschmierung und Rollenführung in der Flachbahn der x-Achse sowie Luftabhebung im Schleifspindelstock serienmäßig. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.
            grinding diameter 350/500 mm
            grinding length 1000 mm
            centre height 175,250 mm
            grinding wheel diameter 400 mm
            grinding wheel width 50 mm
            bore 127 mm
            MK5
            work piece spindle speed 6-600 U/min
            grinding head swivelling 360 °
            grinding spindle head - swivable 180 + - °
            grinding spindle speed 1500,1700,2200 U/min
            0,001-0,030 mm/Ø
            0-0,95 mm/Ø
            ±9 °
            longitudinal feed of the table 1300 mm
            table speeds 0,02-6 m/min
            130 kg
            130 inkl. Spannugkg kg
            Description :
            Nahezu neuwertige Maschine mit original CE.

            Vor Auslieferung erhält sie eine große Wartung
            und eine neue Geometrie nach Kellenberger Abnahmeprotokoll.

            Gewährleistung wie 12 Monate ab Lieferung.

            2-Achs Digitalanzeige Heidenhain

            zusätzlichen Optionen wie:

            -Spritzschutztüren
            -Kabine x-Achse
            -Schwenkwinkelanzeige Schleifspindelstock
            -Schwenkwinkelanzeige Werkstückspindelstock
            -Schwenkwinkelanzeige Obertisch
            -Erhöhung der Spitzenhöhe auf max. 250mm
            -Drehzahlregelung für die Schleifspindel

            Gegen Aufpreis.

            Maschine hat Zentralschmierung und Rollenführung in der Flachbahn der x-Achse
            sowie Luftabhebung im Schleifspindelstock serienmäßig.




            Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den
            grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015
            genannt.
            Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer
            Gefährdungsbeurteilung nach BetrSichV zu ermitteln.


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal KELLENBERGER KEL-Vista UR 175-1000


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-8280 · Cylindrical Grinding Machine - Universal

          KELLENBERGER - KEL-Vista UR 175-1000 - - 2006 -

          Technical details
          grinding diameter 350 mm︱grinding length 1000 mm︱centre height 175 mm︱total power requirement kW︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. m︱
          Machine completely overhauled with 12 months warranty Mechanically and optically like new Photo from Kellenberger brochure Fanuc 21i control -Grinding head UR 1-2-3 external/internal/plan -Axis automatic 1° Hirth serration -Active longitudinal positioning KEL-POS Movomatic -Semi-automatic balancing device KEL-BALANCE -Grinding wheel equipment left 400mm diameter -Grinding wheel equipment right 300mm diameter -Internal grinding unit with belt drive -Tailstock with micro-adjustment -fine adjustment upper table -Paper belt filter SBP4 240l
            grinding diameter 350 mm
            grinding length 1000 mm
            centre height 175 mm
            weight of the machine ca. 3,5 t
            Description :
            Machine completely overhauled with 12 months warranty

            Mechanically and optically like new

            Photo from Kellenberger brochure

            Fanuc 21i control

            -Grinding head UR 1-2-3 external/internal/plan
            -Axis automatic 1° Hirth serration
            -Active longitudinal positioning KEL-POS Movomatic
            -Semi-automatic balancing device KEL-BALANCE
            -Grinding wheel equipment left 400mm diameter
            -Grinding wheel equipment right 300mm diameter
            -Internal grinding unit with belt drive
            -Tailstock with micro-adjustment
            -fine adjustment upper table
            -Paper belt filter SBP4 240l



        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal TOS-CETOS BUB 50 B CNC-3000


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20015 · Cylindrical Grinding Machine - Universal

          TOS-CETOS - BUB 50 B CNC-3000 - - 2004 - Siemens Sinumerik 840D

          Technical details
          grinding diameter 500 mm︱grinding length 2900 mm︱centre height 250 mm︱Control Siemens Sinumerik 840D ︱centre distance 3000 mm︱stroke of the table max. 3200 mm︱table feed 0,001 - 4000 mm/min︱rapid traverse of table 9 m/min︱table swivelling +/- +4/-2 Grad︱grinding wheel size 500x100x203 mm︱peripheral speed 18 - 36 m/sec︱spindle speeds 6 - 900 U/min︱grinding head swivelling 90 Grad︱tailstock quill taper MT 5 ︱tailstock quill stroke 80 mm︱grinding spindle drive 9,5 kW︱working spindle drive 0,1 - 3,1 kW︱hydraulic motor 2,2 kW︱max. workpiece weight between centers 500 kg︱workpiece weight in steadies max. 840 kg︱
          * CNC control SIEMENS SINUMERIK 840D with operating panel OP 10 and color flat screen TFT 10,4" with machine control panel MPC 19" * remote control panel with electronic handwheel for feeding the grinding spindle stand and table * digital servo drives SIMODRIVE 611D for the axis X, Z , C9 * CNC fully controlled "B" axis 195 °/-30° - smallest programmable adjustment of the grinding spindle via CNC program 0.001 ° * CNC-fully controlled "C"-axis in mutual interpolation with "X" or "Z"-axis * complete internal grinding device, incl. hydraulic tiltable dresser on the table for diameter and plan dressing, coolant supply to workpiece spindle stock * internal grinding spindle * full cover of the machine * workpiece clamping control in axial axis * coolant system with belt filter system KNOLL VRF 300 * suction * electric 2-jaw bezel Ø 12-70 * 2 live centers MK 5 * 3-point bezel Ø 30-130 * hydraulic swivelable dresser * rigid dresser can be mounted on the machine bed * 2 pcs. 2 point bezel Ø 10-140 * 3-jaw chuck Ø 250 * 2 mounting flanges for solid discs * 2 auxiliary lunettes Ø 65-200 * Price when new 20004 according to seller: Euro 440.000,-
            grinding diameter 500 mm
            grinding length 2900 mm
            centre height 250 mm
            Control Siemens Sinumerik 840D
            centre distance 3000 mm
            stroke of the table max. 3200 mm
            table feed 0,001 - 4000 mm/min
            rapid traverse of table 9 m/min
            table swivelling +/- +4/-2 Grad
            grinding wheel size 500x100x203 mm
            peripheral speed 18 - 36 m/sec
            spindle speeds 6 - 900 U/min
            grinding head swivelling 90 Grad
            tailstock quill taper MT 5
            tailstock quill stroke 80 mm
            grinding spindle drive 9,5 kW
            working spindle drive 0,1 - 3,1 kW
            hydraulic motor 2,2 kW
            max. workpiece weight between ce. 500 kg
            workpiece weight in steadies max. 840 kg
            Description :
            * CNC control SIEMENS SINUMERIK 840D with operating panel OP 10
            and color flat screen TFT 10,4"
            with machine control panel MPC 19"
            * remote control panel with electronic handwheel for feeding
            the grinding spindle stand and table
            * digital servo drives SIMODRIVE 611D for the axis X, Z , C9
            * CNC fully controlled "B" axis 195 °/-30° - smallest
            programmable adjustment of the grinding spindle
            via CNC program 0.001 °
            * CNC-fully controlled "C"-axis in mutual interpolation
            with "X" or "Z"-axis
            * complete internal grinding device, incl. hydraulic tiltable
            dresser on the table for diameter and plan dressing,
            coolant supply to workpiece spindle stock
            * internal grinding spindle
            * full cover of the machine
            * workpiece clamping control in axial axis
            * coolant system with belt filter system KNOLL VRF 300
            * suction
            * electric 2-jaw bezel Ø 12-70
            * 2 live centers MK 5
            * 3-point bezel Ø 30-130
            * hydraulic swivelable dresser
            * rigid dresser can be mounted on the machine bed
            * 2 pcs. 2 point bezel Ø 10-140
            * 3-jaw chuck Ø 250
            * 2 mounting flanges for solid discs
            * 2 auxiliary lunettes Ø 65-200
            * Price when new 20004 according to seller: Euro 440.000,-




        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal MORARA Heavy Quick I/E 1000 CNC


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-100124 · Cylindrical Grinding Machine - Universal

          MORARA - Heavy Quick I/E 1000 CNC - - 2004 - FAGOR 8055 TCO Digital

          Technical details
          grinding diameter - cylindrical/face 600 mm︱internal grinding diameter 400 mm︱dist. between centers 1030 mm︱grinding diameter mm︱grinding length 1000 mm︱centre height 310 mm︱Control FAGOR 8055 TCO Digital ︱total power requirement kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. 6 x 3,5 m︱
            grinding diameter - cylindrical/. 600 mm
            internal grinding diameter 400 mm
            dist. between centers 1030 mm
            grinding length 1000 mm
            centre height 310 mm
            Control FAGOR 8055 TCO Digital
            weight of the machine ca. 9 t
            dimensions of the machine ca. 6 x 3,5 m


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal HOL-MONTA UB50/2000 CNC


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17814 · Cylindrical Grinding Machine - Universal

          HOL-MONTA - UB50/2000 CNC - - 2003 - K51-C KAVALIR

          Technical details
          grinding diameter 600 mm︱grinding length 2000 mm︱grinding wheel size 500 x 80 x 203 mm︱peripheral speed 33 - 45 m/sec︱grinding spindle head - swivable 45 °︱grinding head swivelling 90 Grad︱table swivelabel +/- + 6 / -3 °︱tailstock quill taper MT 5 ︱tailstock quill stroke 40 mm︱workpiece weight max. 500 kg︱Control K51-C KAVALIR︱total power requirement 16 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. 7,5 x 2,7 x 1,9 m︱
          was used with a central coolant filtering device
            grinding diameter 600 mm
            grinding length 2000 mm
            grinding wheel size 500 x 80 x 203 mm
            peripheral speed 33 - 45 m/sec
            grinding spindle head - swivable 45 °
            grinding head swivelling 90 Grad
            table swivelabel +/- + 6 / -3 °
            tailstock quill taper MT 5
            tailstock quill stroke 40 mm
            workpiece weight max. 500 kg
            Control K51-C KAVALIR
            total power requirement 16 kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. 7,5 x 2,7 x 1,9 m
            Description :
            was used with a central coolant filtering device



        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal KELLENBERGER KEL-VARIA UR/RS 225-1000


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-8028 · Cylindrical Grinding Machine - Universal

          KELLENBERGER - KEL-VARIA UR/RS 225-1000 - - 2002/2024 -

          Technical details
          grinding diameter 450 mm︱grinding length 1000 mm︱centre height 225 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.The machine will be delivered overhauled. Mechanical overhaul: • Overhaul of the entire machine according to Kellenberger measuring protocol • A new service-friendly cabin • Repainting Electrical overhaul: • New, modern CNC cylindrical grinding machine control system • New built up control cabinet • New drive technology • Exchange of all electric lines, Berus pressure switch, etc. • New absolute glas scales in X- and Z- axis • New absolute rotary encoder (for B-axis) Please remark that the pictures show an already delivered machine with other options. Wheelhead variant UR/RS: • Grinding wheel arrangement for external and angular plunge grinding in a row • Thus, in each case 400mm grinding wheel diameter • Thus, substantially lower risk of collision • Easier programming • Grinding wheel equipment in each case 400x63x127mm • HF-Spindle for internal grinding • B-axis CNC-controlled for external-, surface and internal grinding at one setting. • Swivel range +10°/-270° • C-axis for polygon grinding • Tight lower part • Grinding head motor 10,0 kW • Tailstock • Marposs measuring system for grinding wheel alignment • Marposs lateral positioning system
            grinding diameter 450 mm
            grinding length 1000 mm
            centre height 225 mm
            Description :
            As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.The machine will be delivered overhauled.

            Mechanical overhaul:
            • Overhaul of the entire machine according to Kellenberger measuring protocol
            • A new service-friendly cabin
            • Repainting

            Electrical overhaul:
            • New, modern CNC cylindrical grinding machine control system
            • New built up control cabinet
            • New drive technology
            • Exchange of all electric lines, Berus pressure switch, etc.
            • New absolute glas scales in X- and Z- axis
            • New absolute rotary encoder (for B-axis)

            Please remark that the pictures show an already delivered machine with other
            options.

            Wheelhead variant UR/RS:
            • Grinding wheel arrangement for external and angular plunge grinding in a
            row
            • Thus, in each case 400mm grinding wheel diameter
            • Thus, substantially lower risk of collision
            • Easier programming
            • Grinding wheel equipment in each case 400x63x127mm
            • HF-Spindle for internal grinding
            • B-axis CNC-controlled for external-, surface and internal grinding at one
            setting.
            • Swivel range +10°/-270°
            • C-axis for polygon grinding
            • Tight lower part
            • Grinding head motor 10,0 kW
            • Tailstock
            • Marposs measuring system for grinding wheel alignment
            • Marposs lateral positioning system



        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal STUDER S140


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-10047 · Cylindrical Grinding Machine - Universal

          STUDER - S140 - - 2002 - Siemens 840 D

          Technical details
          grinding diameter 120 mm︱grinding length 110 mm︱centre height 60 mm︱x-axis 300 mm︱internal diameter 100 mm︱grinding depth max 300 mm︱swing diameter 120 mm︱rapid traverse 15 m/min︱z-axis 300 mm︱solution in X-, Y- und Z-axis 0,0001 mm︱spindle turning speed range 0-1000 U/min︱tailstock taper MT 5 ︱control Siemens 840 D ︱grinding diameter max. 120 mm︱grinding wheel diameter 400 mm︱grinding wheel width 32 mm︱grinding wheel hole diameter 127 mm︱grinding wheel speeds 3150 U/min︱total power requirement 56 kW︱weight of the machine ca. 6,3 t︱
          two 120mm internal grinding spindels 60.000 and 90.000 rpm installed DIETTEL M5000 balancing dresser CO2 fire extinguishing cooling with oil granite machine bed OD grinding dia 120 mm OD grinding legth 100 mm simultanious ID - OD operation X2 = OD travel X1 = IDtravel
            grinding diameter 120 mm
            grinding length 110 mm
            centre height 60 mm
            x-axis 300 mm
            internal diameter 100 mm
            grinding depth max 300 mm
            swing diameter 120 mm
            rapid traverse 15 m/min
            z-axis 300 mm
            solution in X-, Y- und Z-axis 0,0001 mm
            spindle turning speed range 0-1000 U/min
            tailstock taper MT 5
            control Siemens 840 D
            grinding diameter max. 120 mm
            grinding wheel diameter 400 mm
            grinding wheel width 32 mm
            grinding wheel hole diameter 127 mm
            grinding wheel speeds 3150 U/min
            total power requirement 56 kW
            weight of the machine ca. 6,3 t
            Description :
            two 120mm internal grinding spindels 60.000 and 90.000 rpm installed
            DIETTEL M5000 balancing
            dresser
            CO2 fire extinguishing
            cooling with oil
            granite machine bed
            OD grinding dia 120 mm
            OD grinding legth 100 mm
            simultanious ID - OD operation
            X2 = OD travel
            X1 = IDtravel


        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal DANOBAT R3-4000-S5


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1628 · Cylindrical Grinding Machine - Universal

          DANOBAT - R3-4000-S5 - - 2001-2023 -

          Technical details
          grinding diameter 850 mm︱grinding length 4.000 mm︱centre height 525 mm︱workpiece weight max. betw. centres with steady 5.000 kg︱control SINUMERIK 840 D ︱Feeds & travels - ︱feed Z-axis 0,01 – 6.000 mm/min︱feed X-axis 0,01 – 6.000 mm/min︱Travel Z-axis (table) 4.500 mm︱Travel X-axis (grinding spindle) 650 mm︱Grinding wheel - ︱Max. Dimension Ø1.060x60x304,8 mm︱grinding wheel speeds 1.100 min-1︱peripheral speed 45 m/sec︱power 22 kW︱tail stock - ︱Taper MK 6 ︱quill travel 100 mm︱diameter of quill 115 mm︱Workpiece spindle -
          Equipment & Accessories CNC cylindrical grinding machine in most robust design for heavy workpieces • Scope of geometric retrofit: • Slideways of X- and Z-axis regrinded, intermediate table and top table regrinded • Centre height of headstock and tailstock readjusted • Machine checked from the bottom up and rebuilt • Cabling in the machine renewed • Hydraulic tubes and lines renewed • Ball screws of X- and Z-axis renewed • New bellows • Wearing parts replaced • New machine painting in two-layer-structure with oil-resistant and abrasion-resistant two-component paints, color RAL 7035 light gray and RAL 5007 brilliant blue • CNC Control SINUMERIK 840 D • New balancing of the grinding wheel • 2 pc. Grinding wheels Ø 1.000 x 60 x 304,8 mm • 2 pc. Support bearing • Front drivers + 1 pc. travelling tailstock tip • Coolant unit with belt filter • Full enclosure of the workspace with 2 large sliding doors • Extraction unit for emulsion mist
            grinding diameter 850 mm
            grinding length 4.000 mm
            centre height 525 mm
            workpiece weight max. betw. cent. 5.000 kg
            control SINUMERIK 840 D
            Feeds & travels -
            feed Z-axis 0,01 – 6.000 mm/min
            feed X-axis 0,01 – 6.000 mm/min
            Travel Z-axis (table) 4.500 mm
            Travel X-axis (grinding spindle) 650 mm
            Grinding wheel -
            Max. Dimension Ø1.060x60x304,8 mm
            grinding wheel speeds 1.100 min-1
            peripheral speed 45 m/sec
            power 22 kW
            tail stock -
            Taper MK 6
            quill travel 100 mm
            diameter of quill 115 mm
            Workpiece spindle -
            Description :
            Equipment & Accessories
            CNC cylindrical grinding machine in most robust design for heavy workpieces

            • Scope of geometric retrofit:
            • Slideways of X- and Z-axis regrinded, intermediate table and top table
            regrinded
            • Centre height of headstock and tailstock readjusted
            • Machine checked from the bottom up and rebuilt
            • Cabling in the machine renewed
            • Hydraulic tubes and lines renewed
            • Ball screws of X- and Z-axis renewed
            • New bellows
            • Wearing parts replaced
            • New machine painting in two-layer-structure with oil-resistant and
            abrasion-resistant two-component paints, color RAL 7035 light gray and RAL 5007
            brilliant blue
            • CNC Control SINUMERIK 840 D
            • New balancing of the grinding wheel
            • 2 pc. Grinding wheels Ø 1.000 x 60 x 304,8 mm
            • 2 pc. Support bearing
            • Front drivers + 1 pc. travelling tailstock tip
            • Coolant unit with belt filter
            • Full enclosure of the workspace with 2 large sliding doors
            • Extraction unit for emulsion mist



        • FLECKENSTEIN Werkzeugmaschinen GmbH
        • Sommerweg 15
        • 63831 Wiesen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal TACCHELLA Elektra 1018


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20308 · Cylindrical Grinding Machine - Universal

          TACCHELLA - Elektra 1018 - - 2001 - Fanuc 180-T

          Technical details
          grinding diameter 350 mm︱grinding length 1000 mm︱centre height 180 mm︱Control Fanuc 180-T ︱grinding wheel width 80 (100) mm︱grinding wheel diameter 450 mm︱power capacity - grinding motor 7,5 kW︱table speed -stepless- 10 m/min︱grinding spindle head - swivable +5 / -180 °︱turning speed range - workpiece spindle 10 - 800 U/min︱grinding head swivelling 0 - 15 °︱workpiece weight max. 120 kg︱taper in tailstock-quill MK 4 ︱tailstock quill stroke 35 mm︱dressing device ︱voltage 400 V︱total power requirement 18 kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 3,75 x 2,25 x 1,80 m︱band filter unit 1,75 x 1,20 x 0,80 m︱
          - Serial No.6769 - Universal Cylindrical Grinding Machine with internal grinding spindle - CNC-controlled B-Axis for automatic. swivel of spindle head
            grinding diameter 350 mm
            grinding length 1000 mm
            centre height 180 mm
            Control Fanuc 180-T
            grinding wheel width 80 (100) mm
            grinding wheel diameter 450 mm
            power capacity - grinding motor 7,5 kW
            table speed -stepless- 10 m/min
            grinding spindle head - swivable +5 / -180 °
            turning speed range - workpiece . 10 - 800 U/min
            grinding head swivelling 0 - 15 °
            workpiece weight max. 120 kg
            taper in tailstock-quill MK 4
            tailstock quill stroke 35 mm
            voltage 400 V
            total power requirement 18 kW
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 3,75 x 2,25 x 1,80 m
            band filter unit 1,75 x 1,20 x 0,80 m
            Description :
            - Serial No.6769
            - Universal Cylindrical Grinding Machine
            with internal grinding spindle
            - CNC-controlled B-Axis for automatic.
            swivel of spindle head


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal TACCHELLA Elektra 1018


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-062491 · Cylindrical Grinding Machine - Universal

          TACCHELLA - Elektra 1018 - - 2001 -

          Technical details
          grinding diameter 350 mm︱grinding length 1000 mm︱weight of the machine ca. 6,5 t︱Control ︱centre height mm︱total power requirement kW︱dimensions of the machine ca. m︱
          cycle control grinding wheel left and right internal grinding device tail stock coolant device Technische Daten / technical details: schleifbarer Durchmesser / grinding diameter 350 mm Schleiflänge / grinding lenght 1000 mm Verfahrweg X / travel X 350 mm Verfahrweg Z / travel Z 1180 mm Schwenkbereich Schleifkopf / swivable grinding head 0-180 ° Schleifscheibenmaß links / grinding wheel dimension left 450x80x203 mm Schleifscheibenmaß rechts / grinding wheel dimension right 300x40x127 mm Antriebsleistung Schleifspindel / drive capacity grinding wheel 7,5 kW Gewicht der Maschine / weight 6500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            grinding diameter 350 mm
            grinding length 1000 mm
            weight of the machine ca. 6,5 t
            Description :
            cycle control
            grinding wheel left and right
            internal grinding device
            tail stock
            coolant device

            Technische Daten / technical details:
            schleifbarer Durchmesser / grinding diameter 350 mm
            Schleiflänge / grinding lenght 1000 mm
            Verfahrweg X / travel X 350 mm
            Verfahrweg Z / travel Z 1180 mm
            Schwenkbereich Schleifkopf / swivable grinding head 0-180 °
            Schleifscheibenmaß links / grinding wheel dimension left 450x80x203 mm
            Schleifscheibenmaß rechts / grinding wheel dimension right 300x40x127 mm
            Antriebsleistung Schleifspindel / drive capacity grinding wheel 7,5 kW
            Gewicht der Maschine / weight 6500 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal KARSTENS K 51-1500


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-677552 · Cylindrical Grinding Machine - Universal

          KARSTENS - K 51-1500 - - 2000 -

          Technical details
          grinding diameter 360 mm︱grinding length 1600 mm︱centre height 180 mm︱internal diameter 0 mm︱grinding depth 0 mm︱swing diameter 0 mm︱total power requirement 40 kW︱weight of the machine ca. 10000 kg︱dimensions of the machine ca. m︱
          K A R S T E N S (Germany) Universal “CNC” - Cylindrical Internal and Face Grinding Machine also for grinding excentric and cam profiles and polygons and even suitable for Threadgrinding Model K 51 – 1500 Year 2000 Serial No. 99 093 Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mm Cylindrical Grinding: Grinding Ø, approx. 5 - 360 mm Grinding wheel: Ø x width x bore 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rpm Drives of cyl./int/face spindle units 7.5/4,0/7,5 kW Grinding Wheelhead: 3 Positions = B-Axis Head swivels in 3 positions = 240 ° / 17,5 degree X-axis adjustment in total 360 mm Increments for infeed 0,001 – 125 mm Workpiece wheelhead = C-Axis Spindle speeds steplessly adjustable 10 – 1.000 rpm Spindle taper / Spindle bore MK 4 / 24 mm Table speeds 0,01 – 10.000 mm/min Total electrical load 40 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: * Very versatile CNC Grinding Machine for almost all grinding purposes like External/Internal and Face grinding as well as for Excentric- / Cam- / Polygone Grinding and even for Thread Grinding * Free programmable CNC System make BWO Model 900 C with many grinding cycles and for easy input of the work-parameters. Graphic support, any many more features. * 3 position wheelhead with 3 Grinding spindles as B-Axis, one with measuring feeler (Z - Position) * MOVOMATIC Measuring Device Model ES 400 for diameter control, Probe head CR 60, to be mounted on table. * MPM Automatic Grinding wheel balancing Device, Dressing devices with diamantflees mounted on table surface and also motorized Diamantroll Profile dresser on table (for thread profiles, etc.) * Workhead and tailstock can be easily moved on table by air cushion. Hydraulic quill on tailstock. * No Coolant Device available ! Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.
            grinding diameter 360 mm
            grinding length 1600 mm
            centre height 180 mm
            total power requirement 40 kW
            weight of the machine ca. 10000 kg
            Description :
            K A R S T E N S (Germany)
            Universal “CNC” - Cylindrical Internal and Face Grinding Machine
            also for grinding excentric and cam profiles and polygons and even
            suitable for Threadgrinding Model K 51 – 1500
            Year 2000 Serial No. 99 093

            Height of centres 180 mm
            Distance between centres / grinding length 1,700/1.600 mm

            Cylindrical Grinding: Grinding Ø, approx. 5 - 360 mm
            Grinding wheel: Ø x width x bore 500 x 100 x 127 mm
            Grinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rpm
            Drives of cyl./int/face spindle units 7.5/4,0/7,5 kW

            Grinding Wheelhead: 3 Positions = B-Axis
            Head swivels in 3 positions = 240 ° / 17,5 degree
            X-axis adjustment in total 360 mm
            Increments for infeed 0,001 – 125 mm

            Workpiece wheelhead = C-Axis
            Spindle speeds steplessly adjustable 10 – 1.000 rpm
            Spindle taper / Spindle bore MK 4 / 24 mm
            Table speeds 0,01 – 10.000 mm/min

            Total electrical load 40 kW - 400 V - 50 Hz
            Weight, approx. 10,000 kg

            Accessories / Special Features:

            * Very versatile CNC Grinding Machine for almost all grinding purposes like
            External/Internal and Face grinding as well as for Excentric- / Cam- /
            Polygone Grinding and even for Thread Grinding
            * Free programmable CNC System make BWO Model 900 C with many grinding cycles
            and for easy input of the work-parameters. Graphic support, any many more
            features.
            * 3 position wheelhead with 3 Grinding spindles as B-Axis, one with measuring
            feeler (Z - Position)
            * MOVOMATIC Measuring Device Model ES 400 for diameter control,
            Probe head CR 60, to be mounted on table.
            * MPM Automatic Grinding wheel balancing Device, Dressing devices with
            diamantflees mounted on table surface and also motorized Diamantroll
            Profile dresser on table (for thread profiles, etc.)
            * Workhead and tailstock can be easily moved on table by air cushion.
            Hydraulic quill on tailstock.
            * No Coolant Device available !

            Condition : Good to very good. Machine can be inspected under power.
            Delivery : Ex stock as inspected.
            Payment : Net, after conclusion of contract.



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •