,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Gear Testing Machine

          Machinelist: Gear Testing Machine


          Gear Testing Machine

          used Gear cutting machines Gear Testing Machine HOEFLER EMZ 632


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-16810 · Gear Testing Machine

          HOEFLER - EMZ 632 - - overhauled - Wenzel Win Geco CNC

          Technical details
          max. wheel diameter 630 mm︱gear width 500 mm︱max. module 10 ︱min. module 0,5 ︱max.helical angle 0-90 °︱workpiece weight 100 kg︱centre height 20-1000 mm︱dai. of counterstay center 40 mm︱travel -x axis +/- 115 mm︱travel -y axis -15 bis +320 mm︱travel -z axis 500 mm︱base circle dia. - max. 620 mm︱Control Wenzel Win Geco CNC ︱electrics - voltage/frequency 380/50 V/Hz︱total power requirement 1,6 kVA︱weight of the machine ca. 1,2 t︱range L-W-H 3,4 x 3,2 x 2,5 mm︱
          Gear Test Center will be completely overhauled after Order and equipped with latest control system and software -- Wenzel Win Geco CNC (4 axes) -- Renishaw SP 80H measuring head -- Renishaw measuring systems in X-Y-Z axis -- Heidenhain Exe102 for signal adjustment Turntable SIN/TTL -- Metrotek Software - T-Stylus software: definition of the probes - Software T-Cali: Calibration of the probes - Software T-Align: The eccentricity and tilt of the workpiece axis are determined with the T-Align software. - Software T-Gear for the measurement of: profile, flank, pitch and runout External and internal gears, evaluation of the measurement results according to DIN, AGMA, ISO, Measuring in metric or inch - further software available on request - Conversion is carried out to customer order - Pictures show a completely overhauled machine in new condition - Laser measurement after conversion with highest measuring accuracy - 12 months warranty
            max. wheel diameter 630 mm
            gear width 500 mm
            max. module 10
            min. module 0,5
            max.helical angle 0-90 °
            workpiece weight 100 kg
            centre height 20-1000 mm
            dai. of counterstay center 40 mm
            travel -x axis +/- 115 mm
            travel -y axis -15 bis +320 mm
            travel -z axis 500 mm
            base circle dia. - max. 620 mm
            Control Wenzel Win Geco CNC
            electrics - voltage/frequency 380/50 V/Hz
            total power requirement 1,6 kVA
            weight of the machine ca. 1,2 t
            range L-W-H 3,4 x 3,2 x 2,5 mm
            Description :
            Gear Test Center
            will be completely overhauled after Order and equipped with latest control
            system and software
            -- Wenzel Win Geco CNC (4 axes)
            -- Renishaw SP 80H measuring head
            -- Renishaw measuring systems in X-Y-Z axis
            -- Heidenhain Exe102 for signal adjustment Turntable SIN/TTL
            -- Metrotek Software
            - T-Stylus software: definition of the probes
            - Software T-Cali: Calibration of the probes
            - Software T-Align: The eccentricity and tilt of the workpiece axis
            are determined with the T-Align software.
            - Software T-Gear for the measurement of: profile, flank, pitch and runout
            External and internal gears, evaluation of the measurement results according to
            DIN, AGMA, ISO, Measuring in metric or inch

            - further software available on request
            - Conversion is carried out to customer order
            - Pictures show a completely overhauled machine in new condition
            - Laser measurement after conversion with highest measuring accuracy
            - 12 months warranty




        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine HOEFLER EMZ 632


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2182 · Gear Testing Machine

          HOEFLER - EMZ 632 - - 1990 - Zeiss

          Technical details
          max. wheel diameter 600 mm︱gear width 500 mm︱max. module 20 ︱min. module 0,5 - 20 ︱table diameter 250 mm︱x-travel 230 mm︱y-travel 340 mm︱z-travel 500 mm︱workpiece weight 350 kg︱Control Zeiss ︱max. workpiece diameter 630 mm︱clamping length 20 - 1000 mm︱max.helical angle 90 °︱workpiece weight max. 350 kg︱total power requirement 2 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 3,0 x 2,0 x 2,4 m︱
          Check the profile, the tooth trace and the pitch on external and internal toothed straight and helical gears. Software hob program! Software Unknown interlocking!
            max. wheel diameter 600 mm
            gear width 500 mm
            max. module 20
            min. module 0,5 - 20
            table diameter 250 mm
            x-travel 230 mm
            y-travel 340 mm
            z-travel 500 mm
            workpiece weight 350 kg
            Control Zeiss
            max. workpiece diameter 630 mm
            clamping length 20 - 1000 mm
            max.helical angle 90 °
            workpiece weight max. 350 kg
            total power requirement 2 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 3,0 x 2,0 x 2,4 m
            Description :
            Check the profile, the tooth trace and the pitch on external and internal
            toothed straight and helical gears.
            Software hob program!
            Software Unknown interlocking!


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine HOEFLER EMZ 400


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-255595 · Gear Testing Machine

          HOEFLER - EMZ 400 - - 1988 -

          Technical details
          max. wheel diameter 400 mm︱gear width 500 mm︱max. module 15 ︱min. module 0,5 ︱total power requirement 2,5 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. m︱
          H O E F L E R (Germany) CNC Controlled 4 Axis Inspection Centre for Gears Model EMZ 400 Year 1988 Serial No. 067 047 ____________________________________________________ Working range: Min./max. gear Ø / base circle Ø 0 – 400 / 390 mm Module range 0.5 – 15 Gear width, max. 500 mm Travel of measuring head, approx. +/- 180 mm Helix angle 0 – 60 ° Max. weight of workpiece, approx. 250 kg Distance between centres, approx. 1,000 mm Distance between centre and body of counter steady 205 mm Table Ø, approx. 290 mm Plotter diagram scales 50 / 100 / 500 / 1000 / 200 : 1 Total electrical load, approx. 1.5 kW - 380 V - 50 Hz Weight 2,000 kg Machine is suitable for measuring: Profile and flank lines on a chosen number of teeth on the gear circumference, as well as tooth pitch and runout tests of gears with straight and helical teeth. Accessories / Special Features ? HOEFLER CNC Measuring Control in 4 axes, with monitor and input terminal, for automatic measuring of various gear profiles on known and unknown (with regard to profile) workpieces. ? X = tangential adjustment of measuring head (cross). ? Y = Radial adjustment of complete measuring slide (250 mm) ? Z = Vertical travel of measuring slide. ? C = Table rotation. ? Automatic feed-in of 3-D measuring probe into the base circle and into tooth gap. ? Automatic evaluation of measuring results according to DIN or AGMA. Printing of results, via plotter or a printer. ? Separate HP Workstation, Model 382, the operator carries on a dialog with the computer during the Measuring process via keyboard. The CNC control of the machine is only needed for installation and Maintenance. ? Flexible hand-held control unit allows manual control of the axes for quick feed or creep feed. Inside the system we have a measuring software available which is developed for the MERCEDES BENZ Company, however all standard gears can be measured with this software. The Machine was recently checked through by a HÖFLER Specialist Condition : Very good – machine can inspected under power by appointment Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract
            max. wheel diameter 400 mm
            gear width 500 mm
            max. module 15
            min. module 0,5
            total power requirement 2,5 kW
            weight of the machine ca. 2 t
            Description :
            H O E F L E R (Germany)
            CNC Controlled 4 Axis Inspection Centre for Gears
            Model EMZ 400 Year 1988 Serial No. 067 047
            ____________________________________________________
            Working range:
            Min./max. gear Ø / base circle Ø 0 – 400 / 390 mm
            Module range 0.5 – 15
            Gear width, max. 500 mm

            Travel of measuring head, approx. +/- 180 mm
            Helix angle 0 – 60 °
            Max. weight of workpiece, approx. 250 kg

            Distance between centres, approx. 1,000 mm
            Distance between centre and body of counter steady 205 mm
            Table Ø, approx. 290 mm
            Plotter diagram scales 50 / 100 / 500 / 1000 / 200 : 1

            Total electrical load, approx. 1.5 kW - 380 V - 50 Hz
            Weight 2,000 kg

            Machine is suitable for measuring:
            Profile and flank lines on a chosen number of teeth on the gear
            circumference, as well as tooth pitch and runout tests of gears with
            straight and helical teeth.

            Accessories / Special Features
            ? HOEFLER CNC Measuring Control in 4 axes, with monitor and input terminal, for automatic measuring of various gear profiles on known and unknown (with regard to profile) workpieces.
            ? X = tangential adjustment of measuring head (cross).
            ? Y = Radial adjustment of complete measuring slide (250 mm)
            ? Z = Vertical travel of measuring slide.
            ? C = Table rotation.
            ? Automatic feed-in of 3-D measuring probe into the base circle and into
            tooth gap.
            ? Automatic evaluation of measuring results according to DIN or AGMA.
            Printing of results, via plotter or a printer.
            ? Separate HP Workstation, Model 382, the operator carries on a dialog
            with the computer during the Measuring process via keyboard. The CNC
            control of the machine is only needed for installation and
            Maintenance.
            ? Flexible hand-held control unit allows manual control of the axes for
            quick feed or creep feed.

            Inside the system we have a measuring software available which is developed
            for the MERCEDES BENZ Company, however all standard gears can be measured
            with this software.
            The Machine was recently checked through by a HÖFLER Specialist

            Condition : Very good – machine can inspected under power by appointment
            Delivery : Ex stock, as inspected
            Payment : Net, after conclusion of contract



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine HOEFLER EVTM


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80287 · Gear Testing Machine

          HOEFLER - EVTM - - -

          Technical details
          max. wheel diameter 0 mm︱gear width 0 mm︱max. module 40 ︱min. module 1 ︱weight of the machine ca. 0,05 t︱dimensions of the machine ca. 0,5x0,3x0,3 m︱
          pitch and run-out tester unit for gear measuring machines.
            max. module 40
            min. module 1
            weight of the machine ca. 0,05 t
            dimensions of the machine ca. 0,5x0,3x0,3 m
            Description :
            pitch and run-out tester unit for gear measuring machines.


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine HOEFLER EMZ 400


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23048 · Gear Testing Machine

          HOEFLER - EMZ 400 - - - IBH Micro

          Technical details
          max. wheel diameter 5 - 400 mm︱gear width 300 mm︱max. module 15 ︱min. module 0,5 ︱workpiece weight 250 kg︱Control IBH Micro ︱max. workpiece diameter 400 mm︱clamping length 600 mm︱total power requirement 1,5 kW︱weight of the machine ca. 1,9 t︱dimensions of the machine ca. 1,8 x 0,7 x 1,9 m︱
          Spur gear software for internal and external gearing Profile inspection standard crowning head - root relief K - profile Direction test standard crowning head - root relief K - profile graduation test Axis position correction for on-the-fly measurements up to 0.2 mm axis position error Worm software 3 carriers for gears, 1 carrier block, calibration device,
            max. wheel diameter 5 - 400 mm
            gear width 300 mm
            max. module 15
            min. module 0,5
            workpiece weight 250 kg
            Control IBH Micro
            max. workpiece diameter 400 mm
            clamping length 600 mm
            total power requirement 1,5 kW
            weight of the machine ca. 1,9 t
            dimensions of the machine ca. 1,8 x 0,7 x 1,9 m
            Description :
            Spur gear software for internal and external gearing
            Profile inspection standard crowning head - root relief K - profile
            Direction test standard crowning head - root relief K - profile
            graduation test
            Axis position correction for on-the-fly measurements up to 0.2 mm axis position
            error
            Worm software
            3 carriers for gears, 1 carrier block, calibration device,


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine HOEFLER EMZ 631


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23050 · Gear Testing Machine

          HOEFLER - EMZ 631 - - - IBH Macro

          Technical details
          max. wheel diameter 5 - 630 mm︱gear width 500 mm︱max. module 20 ︱min. module 0,5 ︱workpiece weight 350 kg︱Control IBH Macro ︱max. workpiece diameter 630 mm︱clamping length 1050 mm︱total power requirement 1,8 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 2,0 x 0,7 x 2,4 m︱
          Spur gear software for internal and external gearing Profile inspection standard crowning head - root relief K - profile Direction test standard crowning head - root relief K - profile graduation test Axis position correction for on-the-fly measurements up to 0.2 mm axis position error Snail software 3 carriers for gears, 1 carrier block, calibration device
            max. wheel diameter 5 - 630 mm
            gear width 500 mm
            max. module 20
            min. module 0,5
            workpiece weight 350 kg
            Control IBH Macro
            max. workpiece diameter 630 mm
            clamping length 1050 mm
            total power requirement 1,8 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 2,0 x 0,7 x 2,4 m
            Description :
            Spur gear software for internal and external gearing
            Profile inspection standard crowning head - root relief K - profile
            Direction test standard crowning head - root relief K - profile
            graduation test
            Axis position correction for on-the-fly measurements up to 0.2 mm axis position
            error
            Snail software
            3 carriers for gears, 1 carrier block, calibration device


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •