,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Gear Hobbing Machine - Horizontal

          Machinelist: Gear Hobbing Machine - Horizontal


          Gear Hobbing Machine - Horizontal

          used Gear cutting machines Gear Hobbing Machine - Horizontal BARBER COLMAN 16 - 16


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-19056 · Gear Hobbing Machine - Horizontal

          BARBER COLMAN - 16 - 16 - - ca. 1980 -

          Technical details
          max. wheel diameter 406 mm︱gear width 420 mm︱max. module 4,3 ︱min. module 0,5 ︱hob turning speeds 49 - 246 U/min︱table bore diameter 80 mm︱total power requirement 7 kW︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. 2,8 x 1,6 x 2,2 m︱
            max. wheel diameter 406 mm
            gear width 420 mm
            max. module 4,3
            min. module 0,5
            hob turning speeds 49 - 246 U/min
            table bore diameter 80 mm
            total power requirement 7 kW
            weight of the machine ca. 3,5 t
            dimensions of the machine ca. 2,8 x 1,6 x 2,2 m
            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal GLEASON-PFAUTER P90


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1643 · Gear Hobbing Machine - Horizontal

          GLEASON-PFAUTER - P90 - - 2015 - Siemens - Sinumerik 840 D

          Technical details
          workpiece dia. 100 mm︱module 3.0 mm︱fixture slide travel 400 mm︱Control Siemens - Sinumerik 840 D ︱max. milling cutter diameter 80 mm︱cutter length max. 180 mm︱turning speed range 50 - 12.000 U/min︱table turning speeds 3.000 U/min︱
          Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached extraction system: Ringler, - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle - AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - Workspace, - tailstock, - measuring device, - refrigeration system, - Industrial robots: Epson, - goods carrier, - conveyor belts, - control panel, The machine is in very good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: P 90 | P-90 | Gleason Pfauter P90
            workpiece dia. 100 mm
            module 3.0 mm
            fixture slide travel 400 mm
            Control Siemens - Sinumerik 840 D
            max. milling cutter diameter 80 mm
            cutter length max. 180 mm
            turning speed range 50 - 12.000 U/min
            table turning speeds 3.000 U/min
            Description :
            Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90
            equipped with magnetic chip conveyor for dry and/or wet machining.

            Furnishing:
            - attached extraction system: Ringler,
            - with platform,
            - subindulgence,
            - subsequent loading and unloading handling: Epson - LS6-602S (built 2018),
            - sorting unit,
            - Calibration unit: Stotz, control: Siemens - HMI,
            - Work cell: Eagle - AMZ, with workpiece tray,
            - position check,
            - exit conveyor belt,
            - Control cabinet, with cooling unit: Rittal
            - Workspace,
            - tailstock,
            - measuring device,
            - refrigeration system,
            - Industrial robots: Epson,
            - goods carrier,
            - conveyor belts,
            - control panel,


            The machine is in very good condition.

            For additional equipment information please refer
            to the original order confirmation which is included
            in the offer of this machine.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: P 90 | P-90 | Gleason Pfauter P90


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal GLEASON-PFAUTER P60


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1640 · Gear Hobbing Machine - Horizontal

          GLEASON-PFAUTER - P60 - - 2014 - Siemens - Sinumerik 840 D

          Technical details
          workpiece dia. 80 mm︱module 2,5 mm︱fixture slide travel 220 mm︱Control Siemens - Sinumerik 840 D ︱max. milling cutter diameter 100 mm︱cutter length max. 160 mm︱turning speed range 200 - 5.000 U/min︱table turning speeds 3.000 U/min︱
          Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached exhaust system for dry processing: Ringler, - Noise insulation for dry milling machine - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - coolant device, - Automation unit: AMZ, The machine is in very good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: P 60 | P-60 | Gleason Pfauter P60
            workpiece dia. 80 mm
            module 2,5 mm
            fixture slide travel 220 mm
            Control Siemens - Sinumerik 840 D
            max. milling cutter diameter 100 mm
            cutter length max. 160 mm
            turning speed range 200 - 5.000 U/min
            table turning speeds 3.000 U/min
            Description :
            Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60
            equipped with magnetic chip conveyor for dry and/or wet machining.


            Furnishing:

            - attached exhaust system for dry processing: Ringler,
            - Noise insulation for dry milling machine
            - with platform,
            - subindulgence,
            - subsequent loading and unloading handling: Epson - LS6-602S (built 2018),
            - sorting unit,
            - Calibration unit: Stotz, control: Siemens - HMI,
            - Work cell: Eagle AMZ, with workpiece tray,
            - position check,
            - exit conveyor belt,
            - Control cabinet, with cooling unit: Rittal
            - coolant device,
            - Automation unit: AMZ,

            The machine is in very good condition.

            For additional equipment information please refer
            to the original order confirmation which is included
            in the offer of this machine.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: P 60 | P-60 | Gleason Pfauter P60


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal GLEASON- PFAUTER P 60


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23022 · Gear Hobbing Machine - Horizontal

          GLEASON- PFAUTER - P 60 - - 2002 -

          Technical details
          max. wheel diameter 65 mm︱gear width 140 mm︱max. module 3 ︱min. module 0,5 ︱total power requirement kW︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 3,0 x 2,1 x 2,3 m︱
            max. wheel diameter 65 mm
            gear width 140 mm
            max. module 3
            min. module 0,5
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 3,0 x 2,1 x 2,3 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal PFAUTER P100


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00864 · Gear Hobbing Machine - Horizontal

          PFAUTER - P100 - - 1999 - Siemens 840 C

          Technical details
          max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,9 t︱dimensions of the machine ca. 2 x 2 x 2 m︱
            max. wheel diameter 90 mm
            gear width 50 mm
            max. module 3
            min. module 0,5
            Control Siemens 840 C
            total power requirement 16 kW
            weight of the machine ca. 7,9 t
            dimensions of the machine ca. 2 x 2 x 2 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal PFAUTER P100


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00863 · Gear Hobbing Machine - Horizontal

          PFAUTER - P100 - - 1998 - Siemens 840 C

          Technical details
          max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,9 t︱dimensions of the machine ca. 2 x 2 x 2 m︱
            max. wheel diameter 90 mm
            gear width 50 mm
            max. module 3
            min. module 0,5
            Control Siemens 840 C
            total power requirement 16 kW
            weight of the machine ca. 7,9 t
            dimensions of the machine ca. 2 x 2 x 2 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal PFAUTER P100


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00862 · Gear Hobbing Machine - Horizontal

          PFAUTER - P100 - - 1997 - Siemens 840 C

          Technical details
          max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,9 t︱dimensions of the machine ca. 2 x 2 x 2 m︱
            max. wheel diameter 90 mm
            gear width 50 mm
            max. module 3
            min. module 0,5
            Control Siemens 840 C
            total power requirement 16 kW
            weight of the machine ca. 7,9 t
            dimensions of the machine ca. 2 x 2 x 2 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal PFAUTER P100


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00861 · Gear Hobbing Machine - Horizontal

          PFAUTER - P100 - - 1995 - Siemens 840 C

          Technical details
          max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. 2 x 2 x 2 m︱
            max. wheel diameter 90 mm
            gear width 50 mm
            max. module 3
            min. module 0,5
            Control Siemens 840 C
            total power requirement 16 kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. 2 x 2 x 2 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal PFAUTER PE 125 H


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23084 · Gear Hobbing Machine - Horizontal

          PFAUTER - PE 125 H - - 1992 - Bosch CC 220

          Technical details
          max. wheel diameter 130 mm︱gear width 400 mm︱max. module 3 ︱min. module 0,5 ︱Control Bosch CC 220 ︱milling spindle speeds (infinitely variable) 300 - 1200 U/min︱clamping length max. 1160 mm︱swivel angle for work spindle +/- 45 °︱x-travel 230 mm︱y-travel 170 mm︱z-travel 400 mm︱spindle speeds 1 - 125 mm︱total power requirement 52 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. 4,8 x 3,8 x 2,5 m︱
          Machine in very nice condition! More machines under www.emuk.info
            max. wheel diameter 130 mm
            gear width 400 mm
            max. module 3
            min. module 0,5
            Control Bosch CC 220
            milling spindle speeds (infinite. 300 - 1200 U/min
            clamping length max. 1160 mm
            swivel angle for work spindle +/- 45 °
            x-travel 230 mm
            y-travel 170 mm
            z-travel 400 mm
            spindle speeds 1 - 125 mm
            total power requirement 52 kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. 4,8 x 3,8 x 2,5 m
            Description :
            Machine in very nice condition!
            More machines under www.emuk.info


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal MIKRON A 35/36 CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-473370a · Gear Hobbing Machine - Horizontal

          MIKRON - A 35/36 CNC - - 1992 -

          Technical details
          max. wheel diameter 150 mm︱gear width 300 mm︱max. module 4,5 ︱min. module ︱total power requirement 20 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. m︱
            max. wheel diameter 150 mm
            gear width 300 mm
            max. module 4,5
            total power requirement 20 kW
            weight of the machine ca. 6 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal MIKRON A 33/1


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-448351 · Gear Hobbing Machine - Horizontal

          MIKRON - A 33/1 - - 1985 -

          Technical details
          max. wheel diameter 80 mm︱gear width 150 mm︱max. module 2,5 ︱min. module ︱total power requirement 10 kW︱weight of the machine ca. 2400 kg︱
          M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 ____________________________________________________________ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.
            max. wheel diameter 80 mm
            gear width 150 mm
            max. module 2,5
            total power requirement 10 kW
            weight of the machine ca. 2400 kg
            Description :
            M I K R O N (Switzerland)
            Fully Automatic Gear Hobber for Worm Gears
            Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15
            ____________________________________________________________

            max. gear- without feed magazine approx. 80 mm
            max. gear- with feed magazine approx. 50 mm
            Module max. 2, / 2,5

            Axial milling length approx. 150 mm
            max. workpiece-mounting length approx. 200 mm

            Milling slide can be swivelled up to 90 degrees
            Milling cutter - 24 - 50/63 mm
            Max. radial distance of milling slide 0-14/18 mm
            Milling cutter adjustment max. 25 mm
            Milling cutter speed 212 - 2.000 rpm

            Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation
            radial infinitely adjustable 0,2 - 200 mm/min.

            Milling spindle drive 3 kW
            Total electrical load approx. 10 kW - 50 Hz - 380 Volt
            Weight approx. 2.400 kg

            Accessories/Special Features:
            " Fully automatic operation cycle and minimum idle times due to programmable
            SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off
            for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering
            including 30 different numeric error displays
            Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for
            loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock,
            the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously.
            The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper.
            The whole process is electrically monitored and checked.
            The complete loading facility is encased by plexiglass.
            " Hydraulic work piece clamping device including collets and hydraulic ejector
            " separate cooling system with magnetic separator * separate hydraulic system * various change gears

            This machine is set up for worm gears/armature shafts that can be used for adjustable
            car seats, window lifters, etc.



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal MIKRON A 33/0


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-482607 · Gear Hobbing Machine - Horizontal

          MIKRON - A 33/0 - - 1982 -

          Technical details
          max. wheel diameter 0 mm︱gear width 150 mm︱max. module 2,5 ︱min. module ︱total power requirement 10 kW︱weight of the machine ca. 2400 kg︱dimensions of the machine ca. m︱
            gear width 150 mm
            max. module 2,5
            total power requirement 10 kW
            weight of the machine ca. 2400 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal MIKRON M122.01


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00321 · Gear Hobbing Machine - Horizontal

          MIKRON - M122.01 - - 1980 -

          Technical details
          max. wheel diameter 40 mm︱gear width 35 mm︱max. module 1 ︱min. module 0 ︱voltage 380V 50Hz ︱total power requirement 0,61 kW︱weight of the machine ca. 320 kg︱dimensions of the machine ca. 70x67x134 cm︱
          We quote a horizontal and universal gear hobber of SWISS type MIKRON M122.01 in very good condition. This machine can hob spur and helical gears as well as worms up to module 1,00. The max. diameter is 40mm and width up to 35mm. With the machine is cooling pump with bassin and a set of changing wheels according to list and fixed in machine. Come for inspection to our storage in Giebelstadt, about 80min. from FRANKFURT AIRORT.
            max. wheel diameter 40 mm
            gear width 35 mm
            max. module 1
            voltage 380V 50Hz
            total power requirement 0,61 kW
            weight of the machine ca. 320 kg
            dimensions of the machine ca. 70x67x134 cm
            Description :
            We quote a horizontal and universal gear hobber of SWISS type MIKRON M122.01 in
            very good condition. This machine can hob spur and helical gears as well as
            worms up to module 1,00. The max. diameter is 40mm and width up to 35mm.

            With the machine is cooling pump with bassin and a set of changing wheels
            according to list and fixed in machine.

            Come for inspection to our storage in Giebelstadt, about 80min. from FRANKFURT
            AIRORT.



        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 4.500 €
          Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal WMW ZFWZ 250 x 5A


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23254 · Gear Hobbing Machine - Horizontal

          WMW - ZFWZ 250 x 5A - - 1975 -

          Technical details
          tool taper MK4 ︱diameter of tools max. Ø 145 mm︱table-size L: 800 x B: 700 mm︱surface area Ø 300 mm︱table travel 200 mm︱indexing max 5 Modul︱total power requirement 7,5 kW︱weight of the machine ca. 4,9 t︱dimensions of the machine ca. 2,8 x 1,5 x 2,3 m︱
          Additional information: Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of milling/clamping spindle with counter-holder min./max.: 30 / 240 mm -Counterholder with guide bushes (clamping arbor and milling arbor)
            tool taper MK4
            diameter of tools max. Ø 145 mm
            table-size L: 800 x B: 700 mm
            surface area Ø 300 mm
            table travel 200 mm
            indexing max 5 Modul
            total power requirement 7,5 kW
            weight of the machine ca. 4,9 t
            dimensions of the machine ca. 2,8 x 1,5 x 2,3 m
            Description :
            Additional information:

            Application: Gear hobbing machine for gear cutting of spur and helical gears,
            worm gears and rollable profiles
            Cycle milling and single milling as well as up-cut and climb milling

            Specifications for machining spur and worm gears:
            -Outer Ø max. 250mm with counterholder
            -pitch max. 5mm
            -Tooth helix max. 45°
            -Tooth width max. axial milling 200mm and radial-axial milling 240mm
            -Milling width max. clamping table counterholder 655mm

            Milling slide:
            -swivelling 210°
            -travelling distance 350mm
            -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution

            Further features:
            -counter-point taper MK4, co-rotating
            -Centre distance of milling/clamping spindle with counter-holder min./max.: 30 /
            240 mm
            -Counterholder with guide bushes (clamping arbor and milling arbor)



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal KOEPFER 172


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23086 · Gear Hobbing Machine - Horizontal

          KOEPFER - 172 - - 1972 -

          Technical details
          max. wheel diameter 120 mm︱gear width 150 mm︱max. module 2,5 ︱min. module 0,3 ︱turning speeds 112 - 1000 U/min︱min. number of teeth 6 ︱clamping length max. 300 mm︱total power requirement 3,5 kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 1,3 x 1,2 x 1,5 m︱
            max. wheel diameter 120 mm
            gear width 150 mm
            max. module 2,5
            min. module 0,3
            turning speeds 112 - 1000 U/min
            min. number of teeth 6
            clamping length max. 300 mm
            total power requirement 3,5 kW
            weight of the machine ca. 1,8 t
            dimensions of the machine ca. 1,3 x 1,2 x 1,5 m
            Description :



        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal KOEPFER 135


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-26365B · Gear Hobbing Machine - Horizontal

          KOEPFER - 135 - - 1968 -

          Technical details
          max. wheel diameter mm︱gear width mm︱max. module 0︱min. module 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Gr. to fraesender Ø 24 mm milling cutter diameter: 70 mm
          Gr. to fraesender Ø 50 mm milling cutter diameter: 46 mm
          Gr. to fraesender Ø Magazine: 40 mm
          Gr. Milling length minus gate: 75 mm
          Gr. Workpiece length with magazine: 75 mm
          Gr. Depth: 4 mm
          Gr. Module: 1.25
          KL. being milled tooth number: 3
          Main spindle hole: 18 mm
          Clamping Collet clamping area: 3-18 mm
          I9cyejl
          9 cutter speed: 222-1410 RPM
          10 longitudinal feeds: 0.031-1.25 mm
          Electr. Supply: 380 V, 1 kW
          Weight: 850 kg
          Space requirements: 1050 x 700 x 1500 mm
            Description :
            Gr. to fraesender Ø 24 mm milling cutter diameter: 70 mm

            Gr. to fraesender Ø 50 mm milling cutter diameter: 46 mm

            Gr. to fraesender Ø Magazine: 40 mm

            Gr. Milling length minus gate: 75 mm

            Gr. Workpiece length with magazine: 75 mm

            Gr. Depth: 4 mm

            Gr. Module: 1.25

            KL. being milled tooth number: 3

            Main spindle hole: 18 mm

            Clamping Collet clamping area: 3-18 mm

            I9cyejl

            9 cutter speed: 222-1410 RPM

            10 longitudinal feeds: 0.031-1.25 mm

            Electr. Supply: 380 V, 1 kW

            Weight: 850 kg

            Space requirements: 1050 x 700 x 1500 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal KOEPFER 170


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24039 · Gear Hobbing Machine - Horizontal

          KOEPFER - 170 - - -

          Technical details
          max. wheel diameter 130 mm︱gear width 140 mm︱max. module 2,5 ︱min. module 0,3 ︱turning speeds 112 - 1000 U/min︱min. number of teeth 6 ︱clamping length max. 150 mm︱total power requirement 3,5 kW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 1,3 x 1,2 x 1,5 m︱
            max. wheel diameter 130 mm
            gear width 140 mm
            max. module 2,5
            min. module 0,3
            turning speeds 112 - 1000 U/min
            min. number of teeth 6
            clamping length max. 150 mm
            total power requirement 3,5 kW
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 1,3 x 1,2 x 1,5 m
            Description :



        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Testing Machine

          used Gear cutting machines Gear Testing Machine PFAUTER Zahnräder / Wechselräder P 251


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23114 · Gear Testing Machine

          PFAUTER - Zahnräder / Wechselräder P 251 - - unbekannt -

          Technical details
          amount 36 STK.︱
            amount 36 STK.


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine HOEFLER EMZ 632


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-16810 · Gear Testing Machine

          HOEFLER - EMZ 632 - - overhauled - Wenzel Win Geco CNC

          Technical details
          max. wheel diameter 630 mm︱gear width 500 mm︱max. module 10 ︱min. module 0,5 ︱max.helical angle 0-90 °︱workpiece weight 100 kg︱centre height 20-1000 mm︱dai. of counterstay center 40 mm︱travel -x axis +/- 115 mm︱travel -y axis -15 bis +320 mm︱travel -z axis 500 mm︱base circle dia. - max. 620 mm︱Control Wenzel Win Geco CNC ︱electrics - voltage/frequency 380/50 V/Hz︱total power requirement 1,6 kVA︱weight of the machine ca. 1,2 t︱range L-W-H 3,4 x 3,2 x 2,5 mm︱
          Gear Test Center will be completely overhauled after Order and equipped with latest control system and software -- Wenzel Win Geco CNC (4 axes) -- Renishaw SP 80H measuring head -- Renishaw measuring systems in X-Y-Z axis -- Heidenhain Exe102 for signal adjustment Turntable SIN/TTL -- Metrotek Software - T-Stylus software: definition of the probes - Software T-Cali: Calibration of the probes - Software T-Align: The eccentricity and tilt of the workpiece axis are determined with the T-Align software. - Software T-Gear for the measurement of: profile, flank, pitch and runout External and internal gears, evaluation of the measurement results according to DIN, AGMA, ISO, Measuring in metric or inch - further software available on request - Conversion is carried out to customer order - Pictures show a completely overhauled machine in new condition - Laser measurement after conversion with highest measuring accuracy - 12 months warranty
            max. wheel diameter 630 mm
            gear width 500 mm
            max. module 10
            min. module 0,5
            max.helical angle 0-90 °
            workpiece weight 100 kg
            centre height 20-1000 mm
            dai. of counterstay center 40 mm
            travel -x axis +/- 115 mm
            travel -y axis -15 bis +320 mm
            travel -z axis 500 mm
            base circle dia. - max. 620 mm
            Control Wenzel Win Geco CNC
            electrics - voltage/frequency 380/50 V/Hz
            total power requirement 1,6 kVA
            weight of the machine ca. 1,2 t
            range L-W-H 3,4 x 3,2 x 2,5 mm
            Description :
            Gear Test Center
            will be completely overhauled after Order and equipped with latest control
            system and software
            -- Wenzel Win Geco CNC (4 axes)
            -- Renishaw SP 80H measuring head
            -- Renishaw measuring systems in X-Y-Z axis
            -- Heidenhain Exe102 for signal adjustment Turntable SIN/TTL
            -- Metrotek Software
            - T-Stylus software: definition of the probes
            - Software T-Cali: Calibration of the probes
            - Software T-Align: The eccentricity and tilt of the workpiece axis
            are determined with the T-Align software.
            - Software T-Gear for the measurement of: profile, flank, pitch and runout
            External and internal gears, evaluation of the measurement results according to
            DIN, AGMA, ISO, Measuring in metric or inch

            - further software available on request
            - Conversion is carried out to customer order
            - Pictures show a completely overhauled machine in new condition
            - Laser measurement after conversion with highest measuring accuracy
            - 12 months warranty




        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine Frenco ZW 401


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23069 · Gear Testing Machine

          Frenco - ZW 401 - - 2014 - Frenco

          Technical details
          max. wheel diameter 400 mm︱gear width 600 mm︱max. module 20 ︱min. module 0,1 ︱Control Frenco ︱total power requirement kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. m︱
            max. wheel diameter 400 mm
            gear width 600 mm
            max. module 20
            min. module 0,1
            Control Frenco
            weight of the machine ca. 1,2 t


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine OERLIKON-KLINGELNBERG R30


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03104 · Gear Testing Machine

          OERLIKON-KLINGELNBERG - R30 - - 2007 -

          Technical details
          max. wheel diameter 400 mm︱gear width - mm︱max. module - ︱workpiece dia. 36-300/400 mm︱axis distance 135-290 mm︱spindle turning speed - stepless 3000 1/min︱dist. between centers 100-550 mm︱Control ︱weight of the machine ca. 4000 kg︱dimensions of the machine ca. 2000x3055x2788 mm︱
          Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)
            max. wheel diameter 400 mm
            gear width - mm
            max. module -
            workpiece dia. 36-300/400 mm
            axis distance 135-290 mm
            spindle turning speed - stepless 3000 1/min
            dist. between centers 100-550 mm
            weight of the machine ca. 4000 kg
            dimensions of the machine ca. 2000x3055x2788 mm
            Description :
            Test method:
            - Single flank rolling test
            - Double flank rolling test
            - Structure-borne noise test
            - Heli testing in two-flank contact.

            Features:
            - Use of up to 6 test slides
            - Highest testing accuracy and repeatability
            - Machine table with workpiece drive
            - Swiveling pneumatic unit
            - Spray oil lubrication (type: Vogel)
            - Oil mist extraction (type: Elbaron)


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine KLINGELNBERG-OERLIKON CS 200


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23251 · Gear Testing Machine

          KLINGELNBERG-OERLIKON - CS 200 - - 2004 -

          Technical details
          Clampable cutter head type (max.) 460 mm︱Cutter head weight (max.) 150 kg︱Mounting disc diameter for cutter heads (Ø) 360 mm︱Mounting cone for cutter heads Nominal diameter Ø 58,227 mm︱travel -z axis 200 mm︱diagram-drawing enlargement ±10 - ± 500 µm︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 2 x 1,5 x 2,03 m︱
          In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data
            Clampable cutter head type (max.. 460 mm
            Cutter head weight (max.) 150 kg
            Mounting disc diameter for cutte. 360 mm
            Mounting cone for cutter heads N. Ø 58,227 mm
            travel -z axis 200 mm
            diagram-drawing enlargement ±10 - ± 500 µm
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 2 x 1,5 x 2,03 m
            Description :
            In the manufacturing process for spiral-toothed bevel gears, the quality of the
            gear cutting gear cutting tools used plays a decisive role. Particularly in
            high gear cutting quality and a long service life can only be achieved with
            precisely can only be achieved with precisely adjusted cutterheads.

            The Oerlikon cutterhead setting and testing device CS 200 enables quick and
            easy setting of the individual knives and simple adjustment of the individual
            knives, it checks the position and documents the measurement results. The
            measuring sequence on the CNC-controlled testing device is partially automated:
            The individual actions for carrying out the actions for carrying out the
            sequence are displayed on the screen via the operator guidance. The positioning
            of the individual knives in the cutter head and the height of the knife tips is
            largely automatic thanks to a special sequence and is simultaneously documented
            by means of a run-out diagram. A subsequent measuring sequence checks the
            radial position of the inner and outer cutting edges of all knives in the
            cutterhead. If individual test parameters on the knives do not correspond to the
            the tolerance specifications, this can be individually repositioned. The
            combination of semi-automated setting sequence, operator-guided set-up actions
            and automatic operator-guided set-up actions and automatic measuring sequence,
            cutterheads can be can be set conveniently, quickly and with high precision.

            Operator-guided setting and test sequence

            - Graphic display of the cutter head design and the measurement results with
            tolerance check
            - Instructions for the operator in plain text Instructions for the operator in
            plain text (without coded information)
            - Simple assignment of the measurement results to the knives
            - Documentation of the setting and measurement results via printer- Setting and
            test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types
            - Interface for neutral data


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine KLINGELNBERG-OERLIKON CS 200


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23250 · Gear Testing Machine

          KLINGELNBERG-OERLIKON - CS 200 - - 2002 -

          Technical details
          Clampable cutter head type (max.) 460 mm︱Cutter head weight (max.) 150 kg︱Mounting disc diameter for cutter heads (Ø) 360 mm︱Mounting cone for cutter heads Nominal diameter Ø 58,227 mm︱travel -z axis 200 mm︱diagram-drawing enlargement ±10 - ± 500 µm︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 2 x 1,5 x 2,03 m︱
          In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data
            Clampable cutter head type (max.. 460 mm
            Cutter head weight (max.) 150 kg
            Mounting disc diameter for cutte. 360 mm
            Mounting cone for cutter heads N. Ø 58,227 mm
            travel -z axis 200 mm
            diagram-drawing enlargement ±10 - ± 500 µm
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 2 x 1,5 x 2,03 m
            Description :
            In the manufacturing process for spiral-toothed bevel gears, the quality of the
            gear cutting gear cutting tools used plays a decisive role. Particularly in
            high gear cutting quality and a long service life can only be achieved with
            precisely can only be achieved with precisely adjusted cutterheads.

            The Oerlikon cutterhead setting and testing device CS 200 enables quick and
            easy setting of the individual knives and simple adjustment of the individual
            knives, it checks the position and documents the measurement results. The
            measuring sequence on the CNC-controlled testing device is partially automated:
            The individual actions for carrying out the actions for carrying out the
            sequence are displayed on the screen via the operator guidance. The positioning
            of the individual knives in the cutter head and the height of the knife tips is
            largely automatic thanks to a special sequence and is simultaneously documented
            by means of a run-out diagram. A subsequent measuring sequence checks the
            radial position of the inner and outer cutting edges of all knives in the
            cutterhead. If individual test parameters on the knives do not correspond to the
            the tolerance specifications, this can be individually repositioned. The
            combination of semi-automated setting sequence, operator-guided set-up actions
            and automatic operator-guided set-up actions and automatic measuring sequence,
            cutterheads can be can be set conveniently, quickly and with high precision.

            Operator-guided setting and test sequence

            - Graphic display of the cutter head design and the measurement results with
            tolerance check
            - Instructions for the operator in plain text Instructions for the operator in
            plain text (without coded information)
            - Simple assignment of the measurement results to the knives
            - Documentation of the setting and measurement results via printer- Setting and
            test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types
            - Interface for neutral data


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine HÖFLER H1301/1400


          • ADEM MASCHINEN GMBH
          • Karl-Benz-Straße 1
          • 40764 Langenfeld (Rheinland)
          • Deutschland

          • +49 (0) 2173- 287 77 07
            +49 (0) 2173- 287 77 05
          • adem-maschinen@t-online.de
            www.adem-maschinen.com
          #2000-324 · Gear Testing Machine

          HÖFLER - H1301/1400 - - 1992 -

          Technical details
          max. wheel diameter 1400 mm︱gear width 400 mm︱max. module 25 ︱min. module 1 ︱total power requirement - kW︱weight of the machine ca. 7,0 t︱dimensions of the machine ca. 3,0 x 1,2 x 3,2 m︱
            max. wheel diameter 1400 mm
            gear width 400 mm
            max. module 25
            min. module 1
            total power requirement - kW
            weight of the machine ca. 7,0 t
            dimensions of the machine ca. 3,0 x 1,2 x 3,2 m


        • ADEM MASCHINEN GMBH
        • Karl-Benz-Straße 1
        • 40764 Langenfeld (Rheinland)
        • Deutschland

        • 14.500 €
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •