,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Rack Milling Machine

          Machinelist: Rack Milling Machine


          Bevel Gear Grinding Machine

          used Gear cutting machines Bevel Gear Grinding Machine GLEASON Phoenix 275 G


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17944 · Bevel Gear Grinding Machine

          GLEASON - Phoenix 275 G - - 2008 - SIN 840 D SIEMENS

          Technical details
          ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱tooth width max. 58 mm︱diameter of tools min 69,85 mm︱diameter of tools max. 230 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱work piece table - Ø 212,71 mm︱b-axis + 90,1 / - 1 °︱Control SIN 840 D SIEMENS︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱
          Hoffmann coolant filter system ERK 140-V(L-C) (built 2008) VT oil mist filter system
            ratio of transmission 10:1
            min. number of teeth 3
            max. number of teeth 200
            range of tooth size 20 mm
            tooth width max. 58 mm
            diameter of tools min 69,85 mm
            diameter of tools max. 230 mm
            x-axis 325 mm
            y-axis 350 mm
            z-axis 470 mm
            work piece table - Ø 212,71 mm
            b-axis + 90,1 / - 1 °
            Control SIN 840 D SIEMENS
            total power requirement 75 kW
            weight of the machine ca. 10.000 Kg
            dimensions of the machine ca. 6,10 x 4,40 x 3,30 m
            Description :
            Hoffmann coolant filter system ERK 140-V(L-C) (built 2008)
            VT oil mist filter system


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON Phoenix 275 G


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17513 · Bevel Gear Grinding Machine

          GLEASON - Phoenix 275 G - - 2007 - 160 i - MB FANUC

          Technical details
          ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱diameter of tools min 69,85 mm︱tooth width max. 58 mm︱diameter of tools max. 230 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱work piece table - Ø 212,71 mm︱b-axis + 90,1 / - 1 °︱Control 160 i - MB FANUC︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱
          WAGURI with EWAB robot cell (KUKA Robot) no coolant filter system available
            ratio of transmission 10:1
            min. number of teeth 3
            max. number of teeth 200
            range of tooth size 20 mm
            diameter of tools min 69,85 mm
            tooth width max. 58 mm
            diameter of tools max. 230 mm
            x-axis 325 mm
            y-axis 350 mm
            z-axis 470 mm
            work piece table - Ø 212,71 mm
            b-axis + 90,1 / - 1 °
            Control 160 i - MB FANUC
            total power requirement 75 kW
            weight of the machine ca. 10.000 Kg
            dimensions of the machine ca. 6,10 x 4,40 x 3,30 m
            Description :
            WAGURI
            with EWAB robot cell
            (KUKA Robot)
            no coolant filter system available


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON Phoenix 275 G


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17512 · Bevel Gear Grinding Machine

          GLEASON - Phoenix 275 G - - 2005 - SIN 840 D SIEMENS

          Technical details
          ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱tooth width max. 58 mm︱diameter of tools min 69,85 mm︱diameter of tools max. 230 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱work piece table - Ø 212,71 mm︱b-axis + 90,1 / - 1 °︱Control SIN 840 D SIEMENS︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱
          WAGURI with EWAB load cell built in 2012 (Linear loader) no coolant filter system available
            ratio of transmission 10:1
            min. number of teeth 3
            max. number of teeth 200
            range of tooth size 20 mm
            tooth width max. 58 mm
            diameter of tools min 69,85 mm
            diameter of tools max. 230 mm
            x-axis 325 mm
            y-axis 350 mm
            z-axis 470 mm
            work piece table - Ø 212,71 mm
            b-axis + 90,1 / - 1 °
            Control SIN 840 D SIEMENS
            total power requirement 75 kW
            weight of the machine ca. 10.000 Kg
            dimensions of the machine ca. 6,10 x 4,40 x 3,30 m
            Description :
            WAGURI
            with EWAB load cell built in 2012
            (Linear loader)
            no coolant filter system available


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON PHOENIX  200 HG


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-328540 · Bevel Gear Grinding Machine

          GLEASON - PHOENIX 200 HG - - 1997 -

          Technical details
          max. wheel diameter 215 mm︱gear width 40,65 mm︱max. module ︱total power requirement 20 kW︱weight of the machine ca. 10 t︱
          Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
            max. wheel diameter 215 mm
            gear width 40,65 mm
            total power requirement 20 kW
            weight of the machine ca. 10 t
            Description :
            Max. external Ø of workpiece 215 mm
            Tooth profile, height x width 16 x 40.65 mm
            No. of teeth 5 - 200
            Max. tooth ratio 1 : 10

            Grinding wheel Ø 51 - 190 mm
            Grinding wheel speeds 1,000 - 6,000 rpm

            X Axis (horizontal) 152 mm
            Y Axis (vertical) 178 mm
            Z Axis (slide base plate) 304 mm
            Distance from middle of machine to middle of workspindle 115 mm
            Axial speed 125 mm/sec
            Workpiece speeds 0 - 30 rpm

            Workspindle bore, conical 3 29/32 inch

            Total electrical load 20 kW - 380 V - 50 Hz
            Weight, approx. 10,000 kg

            Accessories / Special Features

            * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters.
            * Extensive coolant equipment with filter system, band filter, etc.
            * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing.
            * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times.


            Condition : Very good - machine can be inspected here under power
            Delivery : Ex stock, as inspected
            Payment : Net, after conclusion of contract

            Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON 120 / 888 W


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-304112 · Bevel Gear Grinding Machine

          GLEASON - 120 / 888 W - - 1980 -

          Technical details
          max. wheel diameter 1010 mm︱gear width 0 mm︱max. module ︱min. module ︱total power requirement 15 kW︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. m︱
          Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.
            max. wheel diameter 1010 mm
            total power requirement 15 kW
            weight of the machine ca. 9,5 t
            Description :
            Max. depth of tooth 10 mm
            Max. workpiece Ø (for clearance) 1,010 mm
            Max. external Ø of coupling 610 mm

            Sliding base withdraw 216 mm
            Max. distance from grinding wheel to workpiece nose 90 - 430 mm
            Max. weight of workpiece, including clamp 500 kg

            No. of teeth 32 to 150

            Grinding wheel Ø, approx 152 - 320 mm
            Grinding wheel speeds, infinitely variable 0 - 3,600 rpm

            Work spindle bore 60 mm

            Total electrical load, approx. 15 kW - 380 V - 50 Hz
            Weight, approx. 9,500 kg

            Accessories / Special Features
            * Automatic roughing and finishing process via pre-settable counter and
            built-in feed cam.
            * Counter for number of teeth.
            * Counter for number of dressing cycles.
            * 2 built-on dressing units with three dressing diamonds for radius dressing,
            side dressing and wheel end dressing.
            * Built-on index plate for 48 teeth.
            * Separate coolant device with band filter.
            * Separate hydraulic unit.
            * Separate TRION oil mist exhaust.
            * Various small parts.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Rack Milling Machine

          used Gear cutting machines Rack Milling Machine DONAU-KNAPP UZFM-V 300 H-CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-544102 · Rack Milling Machine

          DONAU-KNAPP - UZFM-V 300 H-CNC - - 1990 -

          Technical details
          hobbing length 2100 mm︱milling width 300 mm︱max. module 16/18 ︱min. module ︱total power requirement 10 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. m︱
            hobbing length 2100 mm
            milling width 300 mm
            max. module 16/18
            total power requirement 10 kW
            weight of the machine ca. 5 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Rack Milling Machine DONAU-KNAPP UZFM - V 300 H


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-757386 · Rack Milling Machine

          DONAU-KNAPP - UZFM - V 300 H - - 1980 -

          Technical details
          hobbing length 1750 mm︱milling width 260 mm︱max. module 10 ︱min. module 12 ︱total power requirement 8 kW︱weight of the machine ca. 4500 kg︱dimensions of the machine ca. m︱
          D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 – 179 rpm Milling slide swivelling right / left 30 ° Feeds, infinitely variable (milling slide) 0 – 600 mm/min Quick return 2,000 mm/min Milling spindle drive approx. 4 kW Total electrical load 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special Features: * Automatic milling cycle control via cam bloc mounted on milling slide and table slide with possibility of jump switching (= automatic by-pass of an area which should not be milled) and pendulum milling operation (= synchronized milling on the first half of table, and workpiece change on the second half. * hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width 140 mm, clamping height inside the device 60 mm, with own hydraulic aggregate, hand switch, * Manual fine adjustment of table (0.001 mm) for exact positioning in a pre-milled rackgear. * Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories. * Central lubrication. * Built-in hydraulic unit. * Simple Coolant device. Separate switch cabinet, various rack cutter up to 160 dia. This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the cutter head). Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract
            hobbing length 1750 mm
            milling width 260 mm
            max. module 10
            min. module 12
            total power requirement 8 kW
            weight of the machine ca. 4500 kg
            Description :
            D O N A U - K N A P P (Germany)
            Universal Automatic Rack Milling Machine
            Model UZFM – V 300 H
            Year approx. 1980 Serial No. 80-234x

            Max. length of rack 1,750 mm
            Milling travel / milling width cross max. 260 mm
            Module, steel / cast iron 10 / 12
            Table clamping size 275 x 1,850 mm
            Mounting height below cutter, depending on cutter Ø 136 – 410 mm

            Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm
            Cutter width max. floating / with support 50 / 140 mm
            Cutter mandrel Ø max. 50 mm
            Milling spindle head, swivelling right / left 30 / 45 °
            9 spindle speeds 22 – 179 rpm
            Milling slide swivelling right / left 30 °

            Feeds, infinitely variable (milling slide) 0 – 600 mm/min
            Quick return 2,000 mm/min

            Milling spindle drive approx. 4 kW
            Total electrical load 8 kW - 400 V - 50 Hz
            Weight 4,500 kg

            Accessories / Special Features:
            * Automatic milling cycle control via cam bloc mounted on milling slide
            and table slide with possibility of jump switching (= automatic by-pass
            of an area which should not be milled) and pendulum milling operation
            (= synchronized milling on the first half of table, and workpiece change
            on the second half.
            * hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width
            140 mm, clamping height inside the device 60 mm, with own hydraulic
            aggregate, hand switch,
            * Manual fine adjustment of table (0.001 mm) for exact positioning in a
            pre-milled rackgear.
            * Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories.
            * Central lubrication. * Built-in hydraulic unit.
            * Simple Coolant device. Separate switch cabinet, various rack cutter up
            to 160 dia.

            This machine is especially suitable for milling racks, and also for
            manufacturing broaching tools (relief milling is possible by swivelling the
            cutter head).

            Condition : Very good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected
            Payment : Net, after conclusion of contract



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Rack Milling Machine KNAPP ZFM 300 H


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23041 · Rack Milling Machine

          KNAPP - ZFM 300 H - - 1970 -

          Technical details
          hobbing length 1750 mm︱milling width 260 mm︱max. module 10 ︱min. module 0,5 ︱table surface area 250 x 1850 mm︱milling travel cross autom. 260 mm︱swivelable +/- 30 °︱spindle speeds: 29 - 178 ︱total power requirement 6,5 kW︱weight of the machine ca. 3,9 t︱dimensions of the machine ca. 3,6 x 1,9 x 1,8 m︱
            hobbing length 1750 mm
            milling width 260 mm
            max. module 10
            min. module 0,5
            table surface area 250 x 1850 mm
            milling travel cross autom. 260 mm
            swivelable +/- 30 °
            spindle speeds: 29 - 178
            total power requirement 6,5 kW
            weight of the machine ca. 3,9 t
            dimensions of the machine ca. 3,6 x 1,9 x 1,8 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          DONAU-KNAPP - KNAPP -