,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Bevel Gear Generator - Straight

          Machinelist: Bevel Gear Generator - Straight


          Bevel Gear Generator - Straight

          used Gear cutting machines Bevel Gear Generator - Straight GLEASON 104 CONIFLEX


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20211 · Bevel Gear Generator - Straight

          GLEASON - 104 CONIFLEX - - 1997 - Fanuc 0-GC

          Technical details
          max. wheel diameter 216 mm︱tooth width 35 mm︱max. module 8,5 ︱min. module 1,3 ︱ratio 10 : 1 ︱cone distance min./max. 0 - 108 mm︱min/max. pitch cone angle 5°42' - 84°18' ︱cutter speeds 30 - 87 m/min︱feed 4,2 - 69,2 m/min︱main drive motor 3,7 kW︱Control Fanuc 0-GC ︱total power requirement 5 kW︱weight of the machine ca. 7 t︱
          - CNC Control Fanuc 0-GC - Set of Change Gears For Speed, Feed and Roll, Index and Ratio Roll - Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut) - Self-Contained Hydraulic System - Self-Contained Coolant System - Workhead Brake - Full Guards Cover - Full Compliment of Electrics (Motor/Controls) SPECIFICATIONS: Cone Distance: 0 to 4-1/2" Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min) Extreme Ratio: 10-to-1 Pitch Diameter: 10-to-1 ratio; 8-1/2" (max) Pitch Diameter: 1-to-1 ratio; 6" (max) Diametral Pitch (coarsest): 3 DP Diametral Pitch (finest): 20 DP Face Width: 1-3/8" (max) Index Range: 9 to 93 inclusive, and most numbers up to 175 Pressure Angles: 20, 22-1/2 & 25 deg. Diameter of Taper Hole at Large : 3-29/32" Taper per Foot: 39/64" Depth of Taper: 6" Diameter of Hole Through: 2-7/16" Spindle Nose to Machine Center: 1-1/2" to 9" Cutter Speeds: 98 to 286 (feet per minute) Feeds: 4.2 to 69.2 (seconds per tooth)
            max. wheel diameter 216 mm
            tooth width 35 mm
            max. module 8,5
            min. module 1,3
            ratio 10 : 1
            cone distance min./max. 0 - 108 mm
            min/max. pitch cone angle 5°42' - 84°18'
            cutter speeds 30 - 87 m/min
            feed 4,2 - 69,2 m/min
            main drive motor 3,7 kW
            Control Fanuc 0-GC
            total power requirement 5 kW
            weight of the machine ca. 7 t
            Description :
            - CNC Control Fanuc 0-GC
            - Set of Change Gears For Speed, Feed and Roll, Index and Ratio Roll
            - Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut)
            - Self-Contained Hydraulic System
            - Self-Contained Coolant System
            - Workhead Brake
            - Full Guards Cover
            - Full Compliment of Electrics (Motor/Controls)

            SPECIFICATIONS:

            Cone Distance: 0 to 4-1/2"
            Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min)
            Extreme Ratio: 10-to-1
            Pitch Diameter: 10-to-1 ratio; 8-1/2" (max)
            Pitch Diameter: 1-to-1 ratio; 6" (max)
            Diametral Pitch (coarsest): 3 DP
            Diametral Pitch (finest): 20 DP
            Face Width: 1-3/8" (max)
            Index Range: 9 to 93 inclusive, and most numbers up to 175
            Pressure Angles: 20, 22-1/2 & 25 deg.
            Diameter of Taper Hole at Large : 3-29/32"
            Taper per Foot: 39/64"
            Depth of Taper: 6"
            Diameter of Hole Through: 2-7/16"
            Spindle Nose to Machine Center: 1-1/2" to 9"
            Cutter Speeds: 98 to 286 (feet per minute)
            Feeds: 4.2 to 69.2 (seconds per tooth)



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Straight MODUL ZFTK 500/2


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19248 · Bevel Gear Generator - Straight

          MODUL - ZFTK 500/2 - - 1988 -

          Technical details
          max. wheel diameter 620 mm︱gear width 90 mm︱max. module 12 ︱min. module - ︱no. of teeth 6 - 100 ︱pivoting angle 0 - 90 Grad︱spindle taper metr. 100 ︱milling head speed 28 - 56 U/min︱connected load 18 kVA︱total power requirement 14 kW︱weight of the machine ca. 12 t︱
          change gears coolant Chip Conveyor
            max. wheel diameter 620 mm
            gear width 90 mm
            max. module 12
            min. module -
            no. of teeth 6 - 100
            pivoting angle 0 - 90 Grad
            spindle taper metr. 100
            milling head speed 28 - 56 U/min
            connected load 18 kVA
            total power requirement 14 kW
            weight of the machine ca. 12 t
            Description :
            change gears
            coolant
            Chip Conveyor


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Straight KLINGELNBERG BF 204


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-07681 · Bevel Gear Generator - Straight

          KLINGELNBERG - BF 204 - - 1980 -

          Technical details
          max. wheel diameter 180 mm︱gear width 60 mm︱max. module 8 / 10 ︱min. module 1,5 ︱tooth length max. 16 mm︱no. of teeth Segment 6 ︱no. of teeth Vollrundung 6-30 ︱pivoting angle 0 - 10 °︱inserted tooth milling cutter dia. 600 mm︱cutting speed Frässpindel 48-78 m/min︱root circle dia. min. 50 mm︱electrics - voltage/frequency 380 / 50 V/Hz︱total power requirement 16 kW︱weight of the machine ca. 7,6 t︱
          Segmental Gear Generating Machine - specifically for rational production of tapered or cylindrical segmental gears, such as steering sector shafts. This model also operates to the generating-indexing method and permits tooth thickness modifications on the centre Tooth. with chip conveyor and handbooks ex works South Americ
            max. wheel diameter 180 mm
            gear width 60 mm
            max. module 8 / 10
            min. module 1,5
            tooth length max. 16 mm
            no. of teeth Segment 6
            no. of teeth Vollrundung 6-30
            pivoting angle 0 - 10 °
            inserted tooth milling cutter di. 600 mm
            cutting speed Frässpindel 48-78 m/min
            root circle dia. min. 50 mm
            electrics - voltage/frequency 380 / 50 V/Hz
            total power requirement 16 kW
            weight of the machine ca. 7,6 t
            Description :
            Segmental Gear Generating Machine - specifically for rational production of
            tapered or cylindrical segmental gears, such as steering sector shafts.
            This model also operates to the generating-indexing method and permits tooth
            thickness modifications on the centre Tooth.

            with chip conveyor and handbooks
            ex works South Americ


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Straight KLINGELNBERG


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00397 · Bevel Gear Generator - Straight

          KLINGELNBERG - - - - konventionell

          Technical details

          KLINGELNBERG Palloid gear hobs We have around 450 milling cutters in stock in the module range from 1-7. Manufacturer KLINGELNBERG Please contact us! You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            Description :
            KLINGELNBERG
            Palloid gear hobs
            We have around 450 milling cutters in stock in the module range from 1-7.

            Manufacturer KLINGELNBERG

            Please contact us!

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 3.100 €
          Datasheet
          Request / Contact

          Spiral Bevel Gear Cutting Machine

          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 28 P


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-18018 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 28 P - - 2002 - 840 C Siemens

          Technical details
          max. wheel diameter 275 mm︱gear width 55 mm︱max. module 6 ︱min. module 1 ︱Control 840 C Siemens︱total power requirement 100 kW︱weight of the machine ca. 16,7 t︱dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m︱
            max. wheel diameter 275 mm
            gear width 55 mm
            max. module 6
            min. module 1
            Control 840 C Siemens
            total power requirement 100 kW
            weight of the machine ca. 16,7 t
            dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m
            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 28 P


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03108 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 28 P - - 2002 - Sinumerik 840C

          Technical details
          max. wheel diameter 275 mm︱gear width 55 mm︱max. module 6 ︱min. module 1,5 ︱control Sinumerik 840C ︱tooth width 5,5 mm︱spiral angle 0/60 °︱max. number of teeth 120 ︱min. number of teeth 5 ︱transmission ratio max. 1:10 ︱transmission ratio min. 1:1 ︱spindle speeds max. 110 mm︱blade head turning speeds 20-110 1/min︱total power requirement 100 kW︱weight of the machine ca. 16700 kg︱dimensions of the machine ca. 5200x2300x2400 mm︱
            max. wheel diameter 275 mm
            gear width 55 mm
            max. module 6
            min. module 1,5
            control Sinumerik 840C
            tooth width 5,5 mm
            spiral angle 0/60 °
            max. number of teeth 120
            min. number of teeth 5
            transmission ratio max. 1:10
            transmission ratio min. 1:1
            spindle speeds max. 110 mm
            blade head turning speeds 20-110 1/min
            total power requirement 100 kW
            weight of the machine ca. 16700 kg
            dimensions of the machine ca. 5200x2300x2400 mm
            Description :



        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 28 P


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17298 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 28 P - - 2002 - SINUMERIK 840 C

          Technical details
          max. wheel diameter 275 mm︱max. module 6 ︱min. module 1,5 ︱Control SINUMERIK 840 C ︱tooth width 5,5 mm︱spiral angle min. 0 / max. 60 °︱max. number of teeth 120 ︱min. number of teeth 5 ︱ratio of transmission 1:10 ︱min. ratio of transmission 1:1 ︱work piece spindle speed max. 110 U/min︱blade head turning speeds 20 - 110 U/min︱total power requirement 100 kW︱weight of the machine ca. 16,7 t︱dimensions of the machine ca. 5,20 x 2,30 x 2,40 m︱
          Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device
            max. wheel diameter 275 mm
            max. module 6
            min. module 1,5
            Control SINUMERIK 840 C
            tooth width 5,5 mm
            spiral angle min. 0 / max. 60 °
            max. number of teeth 120
            min. number of teeth 5
            ratio of transmission 1:10
            min. ratio of transmission 1:1
            work piece spindle speed max. 110 U/min
            blade head turning speeds 20 - 110 U/min
            total power requirement 100 kW
            weight of the machine ca. 16,7 t
            dimensions of the machine ca. 5,20 x 2,30 x 2,40 m
            Description :
            Internal deburring device U axis / Q spindle
            chip conveyor
            coolant device
            Electrostatic air purifier ELBARON

            no tools
            No workpiece clamping device


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine OERLIKON SKM 1


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-90037 · Spiral Bevel Gear Cutting Machine

          OERLIKON - SKM 1 - - -

          Technical details
          max. wheel diameter 320 mm︱gear width 50 mm︱max. module 7,5 ︱min. module 2,1 ︱total power requirement 13 kW︱weight of the machine ca. 7 t︱dimensions of the machine ca. 1,7 x 1,9 x 2,7 m︱
          Tooth width max. 50 mm Adjustment range for hypoid wheels (offset) +/- 60 mm. Through hole for spindle pieces 78 mm. Plunge max 20 mm. Feed rates for cutting, infinitely variable 0.04 - 25 mm/min. Distance taper tip/workpiece spindle... 100 - 345 mm. Distance taper centre/knife head axis 25 - 150 mm. Distance taper centre/milling head spindle... 80 - 220 mm. Max. disc wheel Ø with medium spiral angle... 320 mm. Max. Gear ratio 1 : 9.5 Module 2.1 - 7.5 Outer bevel distance approx. 170 mm. Rapid traverse 1.5 m/min. Roller feeds in minutes from angle pe... 0,3 - 20 Spindle nose with short taper, inside 140 mm. Spindle nose with short taper, outside 85 mm. Spindle speeds in standardised steps 40-250 rpm. Rotation around the machine centre axis 90º Ø max. gearbox 320 mm. Ø of spindle nose 130 mm Electrical properties Motor cooling capacity 1.2 Cv. Main motor power 10 Cv. Motor power chip conveyor 0.3 HP. Forward motor power 2 HP. Hydraulic motor power 2 HP. Total power 13 Kw. Voltage 220/380V.
            max. wheel diameter 320 mm
            gear width 50 mm
            max. module 7,5
            min. module 2,1
            total power requirement 13 kW
            weight of the machine ca. 7 t
            dimensions of the machine ca. 1,7 x 1,9 x 2,7 m
            Description :
            Tooth width max. 50 mm
            Adjustment range for hypoid wheels (offset) +/- 60 mm.
            Through hole for spindle pieces 78 mm.
            Plunge max 20 mm.
            Feed rates for cutting, infinitely variable 0.04 - 25 mm/min.
            Distance taper tip/workpiece spindle... 100 - 345 mm.
            Distance taper centre/knife head axis 25 - 150 mm.
            Distance taper centre/milling head spindle... 80 - 220 mm.
            Max. disc wheel Ø with medium spiral angle... 320 mm.
            Max. Gear ratio 1 : 9.5
            Module 2.1 - 7.5
            Outer bevel distance approx. 170 mm.
            Rapid traverse 1.5 m/min.
            Roller feeds in minutes from angle pe... 0,3 - 20
            Spindle nose with short taper, inside 140 mm.
            Spindle nose with short taper, outside 85 mm.
            Spindle speeds in standardised steps 40-250 rpm.
            Rotation around the machine centre axis 90º
            Ø max. gearbox 320 mm.
            Ø of spindle nose 130 mm
            Electrical properties
            Motor cooling capacity 1.2 Cv.
            Main motor power 10 Cv.
            Motor power chip conveyor 0.3 HP.
            Forward motor power 2 HP.
            Hydraulic motor power 2 HP.
            Total power 13 Kw.
            Voltage 220/380V.


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          KLINGELNBERG - MODUL - GLEASON -