,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          milling machining centers - vertical

          Machinelist: milling machining centers - vertical


          Milling Machine - Vertical

          used Milling machines Milling Machine - Vertical VOMA 1100


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23204 · Milling Machine - Vertical

          VOMA - 1100 - - 1973 -

          Technical details
          x-travel 600 mm︱y-travel 450 mm︱z-travel 400 mm︱tool taper MK 3 ︱feed stepless 20-600 mm/min︱turning speeds 80-3000 U/min︱crossrail adjustment horizontal +/- 15 Grad︱total power requirement 4 kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. 1,25x 1x1,85 m︱
            x-travel 600 mm
            y-travel 450 mm
            z-travel 400 mm
            tool taper MK 3
            feed stepless 20-600 mm/min
            turning speeds 80-3000 U/min
            crossrail adjustment horizontal +/- 15 Grad
            total power requirement 4 kW
            weight of the machine ca. 1 t
            dimensions of the machine ca. 1,25x 1x1,85 m


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical STANKO 6M12


          • Sachsenring Werkzeug Maschinen GmbH
          • Talstr. 77 B
          • 09337 Hohenstein-Ernstthal
          • Deutschland

          • +49 (0)3723 / 6684755
            +49 (0)3723 / 6684750
          • info@swmgmbh.de
            swmgmbh.de
          #2038-4068 · Milling Machine - Vertical

          STANKO - 6M12 - - 1970 -

          Technical details
          table-size 320 x 1250 mm︱reus 31,5 - 1600 U/min︱total power requirement 7 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. m︱z-travel mm︱y-travel mm︱x-travel mm︱
          Vertical milling machine, used, Manufacturer: Stanko, Type: 6M12, Year of manufacture: 1970
            table-size 320 x 1250 mm
            reus 31,5 - 1600 U/min
            total power requirement 7 kW
            weight of the machine ca. 3 t
            Description :
            Vertical milling machine, used,
            Manufacturer: Stanko, Type: 6M12,
            Year of manufacture: 1970


        • Sachsenring Werkzeug Maschinen GmbH
        • Talstr. 77 B
        • 09337 Hohenstein-Ernstthal
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical DROOP & REIN FS 130 g


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-01822 · Milling Machine - Vertical

          DROOP & REIN - FS 130 g - - 1966 -

          Technical details
          x-travel 1900 mm︱y-travel 1020 mm︱z-travel 1020 mm︱table surface area 2400 x 1000 mm︱spindle taper SK 50 ︱spindle turning speed range 20-1000 U/min︱spindle drive 26 kW︱spindle diameter 130 mm︱width of T-slots 22/42 mm︱flute distance 168 mm︱number of T-slots 6 ︱angular milling head ︱digital readout Heidenhain ︱total power requirement 25 kW︱weight of the machine ca. 23,5 t︱
          with digital readout ball screw extensive toolings and accessories!
            x-travel 1900 mm
            y-travel 1020 mm
            z-travel 1020 mm
            table surface area 2400 x 1000 mm
            spindle taper SK 50
            spindle turning speed range 20-1000 U/min
            spindle drive 26 kW
            spindle diameter 130 mm
            width of T-slots 22/42 mm
            flute distance 168 mm
            number of T-slots 6
            digital readout Heidenhain
            total power requirement 25 kW
            weight of the machine ca. 23,5 t
            Description :
            with digital readout
            ball screw

            extensive toolings and accessories!


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical SAIMP FVS 3


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4617 · Milling Machine - Vertical

          SAIMP - FVS 3 - - -

          Technical details
          x-travel 1200 mm︱y-travel 350 mm︱z-travel 350 mm︱table-size 1800x405 mm︱spindle taper ISO 50 ︱spindle turning speed range 30-1800 U/min︱weight of the machine ca. 4.4 t︱
          Misc accessories www.marcels-maschinen.ch
            x-travel 1200 mm
            y-travel 350 mm
            z-travel 350 mm
            table-size 1800x405 mm
            spindle taper ISO 50
            spindle turning speed range 30-1800 U/min
            weight of the machine ca. 4.4 t
            Description :
            Misc accessories

            www.marcels-maschinen.ch


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical Mikron WF 31 C


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F538 · Milling Machine - Vertical

          Mikron - WF 31 C - - -

          Technical details
          CNC brand Heidenhain ︱CNC model TNC 155 ︱Table length 800 mm︱Table width 460 mm︱X 500 mm︱Y 500 mm︱Z 400 mm︱Spindle taper SK 40 ︱Speed 31 - 3150 RPM︱Distance between table and milling head 1940 x 2010 x 1920 mm︱Machine dimensions (lxwxh) 2300 mm︱
            CNC brand Heidenhain
            CNC model TNC 155
            Table length 800 mm
            Table width 460 mm
            X 500 mm
            Y 500 mm
            Z 400 mm
            Spindle taper SK 40
            Speed 31 - 3150 RPM
            Distance between table and milli. 1940 x 2010 x 1920 mm
            Machine dimensions (lxwxh) 2300 mm
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical MIKRON WF 51 C


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-10058 · Milling Machine - Vertical

          MIKRON - WF 51 C - - - Heidenhain

          Technical details
          x-travel 800 mm︱y-travel 500 mm︱z-travel mm︱Control Heidenhain ︱tool taper SK 4013,5 kw︱turning speeds 3150 U/min︱total power requirement kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. m︱
            x-travel 800 mm
            y-travel 500 mm
            Control Heidenhain
            tool taper SK 40
            13,5 kw
            turning speeds 3150 U/min
            weight of the machine ca. 3 t


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical MATHEYS 2B


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-F584X · Milling Machine - Vertical

          MATHEYS - 2B - - -

          Technical details
          x-travel 450 mm︱y-travel 300 mm︱z-travel 240 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Brand: Matheys Type: 2B Table length: 850 mm Table width: 235 mm X: 450 mm Y: 300 mm Z: 240 mm Maximum speed: 2.500 RPM Variable adjustable speed
            x-travel 450 mm
            y-travel 300 mm
            z-travel 240 mm
            Description :
            Brand: Matheys
            Type: 2B
            Table length: 850 mm
            Table width: 235 mm
            X: 450 mm
            Y: 300 mm
            Z: 240 mm
            Maximum speed: 2.500 RPM
            Variable adjustable speed


        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical Hermle UWF 1000


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F659 · Milling Machine - Vertical

          Hermle - UWF 1000 - - -

          Technical details
          CNC brand Heidenhain ︱Table length 1.000 mm︱Table width 500 mm︱X 700 mm︱Y 550 mm︱Z 500 mm︱Spindle taper SK40 ︱Machine dimensions (lxwxh) 2.900 x 2.500 x 2.200 mm︱Machine weight 4.000 kg︱
          Brand Hermle Machine no F659 Type UWF 1000 CNC Brand Heidenhain CNC Type TNC 155 Table length 1.000 mm Table width 500 mm X 700 mm Y 550 mm Z 500 mm Spindle taper SK40 mm drill pinole 100 mm Max. workpiece weight 400 kg Manual available Machine size (lxwxh) 2.900 x 2.500 x 2.200 mm Machine weight 4.000 kg
            CNC brand Heidenhain
            Table length 1.000 mm
            Table width 500 mm
            X 700 mm
            Y 550 mm
            Z 500 mm
            Spindle taper SK40
            Machine dimensions (lxwxh) 2.900 x 2.500 x 2.200 mm
            Machine weight 4.000 kg
            Description :
            Brand Hermle
            Machine no F659
            Type UWF 1000
            CNC Brand Heidenhain
            CNC Type TNC 155
            Table length 1.000 mm
            Table width 500 mm
            X 700 mm
            Y 550 mm
            Z 500 mm
            Spindle taper SK40 mm
            drill pinole 100 mm
            Max. workpiece weight 400 kg
            Manual available
            Machine size (lxwxh) 2.900 x 2.500 x 2.200 mm
            Machine weight 4.000 kg



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical Metba fac-cm


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F645 · Milling Machine - Vertical

          Metba - fac-cm - - -

          Technical details
          Table length 1.350 mm︱Table width 320 mm︱X 650 mm︱Y 300 mm︱Z 380 mm︱Spindle taper ISO 40 ︱Machine dimensions (lxwxh) 1.600 x 1.800 x 2.400 mm︱Machine weight 1.750 kg︱
          Brand Metba Machine no F645 Type fac-cm Table length 1.350 mm Table width 320 mm X 650 mm Y 300 mm Z 380 mm Spindle taper ISO40 Speed minimum 65 RPM Speed maximum 3.600 RPM Milling spindle adjustable in degrees Rapid on the table Drilling depth milling spindle 130 mm With digital readout Machine size (lxwxh) 1.600 x 1.800 x 2.400 mm Machine weight 1.750 kg
            Table length 1.350 mm
            Table width 320 mm
            X 650 mm
            Y 300 mm
            Z 380 mm
            Spindle taper ISO 40
            Machine dimensions (lxwxh) 1.600 x 1.800 x 2.400 mm
            Machine weight 1.750 kg
            Description :
            Brand Metba
            Machine no F645
            Type fac-cm
            Table length 1.350 mm
            Table width 320 mm
            X 650 mm
            Y 300 mm
            Z 380 mm
            Spindle taper ISO40
            Speed minimum 65 RPM
            Speed maximum 3.600 RPM
            Milling spindle adjustable in degrees
            Rapid on the table
            Drilling depth milling spindle 130 mm
            With digital readout
            Machine size (lxwxh) 1.600 x 1.800 x 2.400 mm
            Machine weight 1.750 kg



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          milling machining centers - vertical

          used Milling machines milling machining centers - vertical HAAS VF3SS YT


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5669 · milling machining centers - vertical

          HAAS - VF3SS YT - - 2019 - Haas

          Technical details
          x-travel 1016 mm︱y-travel 660 mm︱z-travel 635 mm︱control Haas ︱total power requirement kW︱weight of the machine ca. 6804 kg︱dimensions of the machine ca. m︱
            x-travel 1016 mm
            y-travel 660 mm
            z-travel 635 mm
            control Haas
            weight of the machine ca. 6804 kg


        • Hop Machines
        • Wethouder Lindersstraat 145
        • 5455 GK Wilbertoord
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical KIHEUNG COMBI T 1100 RT


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-020037 · milling machining centers - vertical

          KIHEUNG - COMBI T 1100 RT - - 2019 - HEIDENHAIN TNC 640

          Technical details
          2500 mm︱ 1400 mm︱ 1400 mm︱ 1600x1400 mm︱ SK 504.000 U/min︱
            2500 mm
            1400 mm
            1400 mm
            1600x1400 mm
            SK 50
            4.000 U/min


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical DOOSAN DNM750II


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5657 · milling machining centers - vertical

          DOOSAN - DNM750II - - 2019 - Fanuc

          Technical details
          x-travel 1630 mm︱y-travel 762 mm︱z-travel 650 mm︱control Fanuc ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 1630 mm
            y-travel 762 mm
            z-travel 650 mm
            control Fanuc


        • Hop Machines
        • Wethouder Lindersstraat 145
        • 5455 GK Wilbertoord
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical MAZAK VTC-820/20


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09204F · milling machining centers - vertical

          MAZAK - VTC-820/20 - - 2019 - Mazatrol Smooth G

          Technical details
          x-travel 2.000 mm︱y-travel 820 mm︱z-travel 720 mm︱Control Mazatrol Smooth G ︱spindle taper SK 40 ︱spindle turning speed range 35 - 12.000 U/min︱spindle motor 22 kW︱distance spindle centre table top edge 140 - 860 mm︱table load 1700 Kg︱rapid travel x/y/z 50 m/min︱table width 820 mm︱table length 2500 mm︱table height over floor 870 mm︱T-slots 7 ︱T-slot - width 18 mm︱T-slot - distance 100 mm︱tool change unit 48 ︱tool changing time 4,7 sec︱wotkpiece diameter with 2 vacant positions 130 mm︱workpiece diameter at full load 80 mm︱
          STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the following special accessories: - Internal air supply with rotating spindle - 1 set of paper manuals - Tool magazine for 48 tools - Pulse handwheel 1 (removable) - Additional work area lighting - Preparation for cooling through the spindle 70 bar - Coolant pump with 25 bar - Hinged belt conveyor, on the left side - Drilling cycle with torque-dependent chip breaking - Synchronised tapping - Rapid traverse constant inclination angle during movement - All dimensions, weights and performance data are non-binding - Used machine without warranty - Subject to prior sale -
            x-travel 2.000 mm
            y-travel 820 mm
            z-travel 720 mm
            Control Mazatrol Smooth G
            spindle taper SK 40
            spindle turning speed range 35 - 12.000 U/min
            spindle motor 22 kW
            distance spindle centre table to. 140 - 860 mm
            table load 1700 Kg
            rapid travel x/y/z 50 m/min
            table width 820 mm
            table length 2500 mm
            table height over floor 870 mm
            T-slots 7
            T-slot - width 18 mm
            T-slot - distance 100 mm
            tool change unit 48
            tool changing time 4,7 sec
            wotkpiece diameter with 2 vacant. 130 mm
            workpiece diameter at full load 80 mm
            Description :
            STANDARD ACCESSORIES

            Transformer for the European market
            USB port (1 port)
            Mazak standard colour
            Spindle speed 12,000 min-1 (steep taper 40)
            Work area lighting

            SAFETY DEVICES
            Operator door with locking switch
            Work area panelling
            The splash guard encloses the working area from the side.
            Fully enclosed work area
            Protection against chips, coolant and access to the work area during automatic
            machining.
            Safety precautions in accordance with global standards

            COOLANT SUPPLY
            Coolant supply through spindle (pressure at the pump = 5 bar)
            Complete coolant system includes pumps, valves, pipework and nozzles
            for the efficient production of quality components.

            FACTORY AUTOMATION
            Automatic switch on/off and warm-up function
            Automatic switch-on of a warm-up cycle via digital timer

            MEASUREMENT SYSTEM
            Tool length measurement and tool breakage detection

            CHIP DISPOSAL
            Factory preparation for chip conveyor (left)

            NUMERICAL CONTROL
            Fixed control/operating unit
            Relocation Detector
            Mazatrol SmoothG control unit
            19" LCD colour screen (touch screen)
            Mazak tapping/drilling cycle Tornado (Mazatrol)
            By drilling and tapping in helical machining mode, a wide range of diameters
            a wide range of diameters can be machined at high speed with
            a wide range of diameters can be machined at high speed with just one tool.
            This function minimises programming and
            machining times.
            EIA/ISO input function
            Tool path check in the background
            The tool path of a programme can be checked even if another programme number is
            programme number is called up and processed in automatic mode.
            3D coordinate conversion
            Shape compensation for rotating axes
            Mazacc 2D software (contour correction)
            Accuracy is maintained at high feed rates.
            Mazacc-3D software package for high-speed machining
            High-speed and high-accuracy machining for contours defined in the finest
            programme
            contours defined in the finest programme increments.
            MAZACC-3D high-speed software package (NO456) is additionally required.
            Control with high smoothing
            Interface for LAN
            SD Memory Card I/F
            Smooth standard software for M/C
            - NO443 B) MAZACC-2D software (workpiece shape compensation)
            - NO444 D) MAZACC-3D high-speed software package
            - NO445 B) Shape compensation for rotating axes
            - NO497 D) High accuracy control for finishing operations
            - Seamless corner point control
            - Variable acceleration control
            - Ultra high speed machining mode
            - NO498 Rapid traverse paths Rounding function
            Absolute positioning system

            Machine incl. the following special accessories:
            - Internal air supply with rotating spindle
            - 1 set of paper manuals
            - Tool magazine for 48 tools
            - Pulse handwheel 1 (removable)
            - Additional work area lighting
            - Preparation for cooling through the spindle 70 bar
            - Coolant pump with 25 bar
            - Hinged belt conveyor, on the left side
            - Drilling cycle with torque-dependent chip breaking
            - Synchronised tapping
            - Rapid traverse constant inclination angle during movement

            - All dimensions, weights and performance data are non-binding
            - Used machine without warranty
            - Subject to prior sale -


        • Mager & Wedemeyer
        • Europaallee 24a
        • 28309 Bremen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical PRIMINER DELTA CENTER V6L


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02424 · milling machining centers - vertical

          PRIMINER - DELTA CENTER V6L - - 2018 -

          Technical details
          x-travel 600 mm︱y-travel 400 mm︱z-travel 450 mm︱total power requirement 20 kW︱weight of the machine ca. 3.5 t︱
          CNC SIEMENS 840 D CHIP CONVOYEUR VERYU NICE MACHINE 10000 RPM 20 TOOLS MAGASIN ISO 40
            x-travel 600 mm
            y-travel 400 mm
            z-travel 450 mm
            total power requirement 20 kW
            weight of the machine ca. 3.5 t
            Description :
            CNC SIEMENS 840 D
            CHIP CONVOYEUR
            VERYU NICE MACHINE
            10000 RPM
            20 TOOLS MAGASIN ISO 40


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical HURCO VMX 24i


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19201 · milling machining centers - vertical

          HURCO - VMX 24i - - 2016 - WinMax

          Technical details
          x-travel 610 mm︱y-travel 510 mm︱z-travel 610 mm︱Control WinMax ︱table-size 760 x 510 mm︱spindle taper: SK 40 ︱spindle turning speed range 12000 U/min︱rapid traverse 38 m/min︱total power requirement 18 kVA︱
          equipped with: - CNC control WINMax (V10) with simulation graphics & handwheel - tool changer 30-fold - chip conveyor - Renishaw probe - coolant system - spindle cooler - tool package - 3 vises - CE mark Almost exclusively aluminum, brass or plastic parts were manufactured 7281h Power-On and 2272h Spindle Hours
            x-travel 610 mm
            y-travel 510 mm
            z-travel 610 mm
            Control WinMax
            table-size 760 x 510 mm
            spindle taper: SK 40
            spindle turning speed range 12000 U/min
            rapid traverse 38 m/min
            total power requirement 18 kVA
            Description :
            equipped with:
            - CNC control WINMax (V10) with simulation graphics & handwheel
            - tool changer 30-fold
            - chip conveyor
            - Renishaw probe
            - coolant system
            - spindle cooler
            - tool package
            - 3 vises
            - CE mark
            Almost exclusively aluminum, brass or plastic parts were manufactured
            7281h Power-On and 2272h Spindle Hours


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical AVIA VMC 800


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023255 · milling machining centers - vertical

          AVIA - VMC 800 - - 2016 - Siemens Sinumerik 828D

          Technical details
          x-travel 800 mm︱y-travel 540 mm︱z-travel 620 mm︱control Siemens Sinumerik 828D ︱main spindle: ︱turning speed range - main spindle 50 - 10.000 min/-1︱drive capacity - main spindle 17 kW︱tool taper SK 40 ︱work table: ︱table surface area 1000 x 550 mm︱T-slots (number x width x distance) 5 / 18 / 100 mm︱max. workpiece weight 850 kg︱tool changer: ︱number of tool places 30 Pos.︱change-time tool to tool 2,5 sec︱max. tool diameter 85 / 130 mm︱max. tool length 300 mm︱max. tool weight 7 kg︱total power requirement 27 kW︱weight of the machine ca. 5,15 t︱
          In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 800 mm
            y-travel 540 mm
            z-travel 620 mm
            control Siemens Sinumerik 828D
            turning speed range - main spind. 50 - 10.000 min/-1
            drive capacity - main spindle 17 kW
            tool taper SK 40
            table surface area 1000 x 550 mm
            T-slots (number x width x distan. 5 / 18 / 100 mm
            max. workpiece weight 850 kg
            number of tool places 30 Pos.
            change-time tool to tool 2,5 sec
            max. tool diameter 85 / 130 mm
            max. tool length 300 mm
            max. tool weight 7 kg
            total power requirement 27 kW
            weight of the machine ca. 5,15 t
            Description :
            In our opinion, the machine is in good used condition
            Condition and can be viewed under power by appointment.

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical DAH LIH LIEDER  LIEDER MCV 2600


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03852 · milling machining centers - vertical

          DAH LIH LIEDER - LIEDER MCV 2600 - - 2015 - HEIDENHAIN TNC 530

          Technical details
          x-travel 2600 mm︱y-travel 870 mm︱z-travel 760 mm︱table surface area 2300 x 970 mm︱control HEIDENHAIN TNC 530 ︱spindle turning speed range 12000 U/min︱spindle drive 15 kW︱ 32 St.︱tool adaptor BT 40︱internal coolant system feed 20 bar ︱feed 10 m/min︱rapid traverse 20/20/30 m/min︱total power requirement 25 kW︱
          used vertical machinig centre witH dual arm toolchanger BT 40 HEIDENHAIN TNC 530 - Dual toolchanger - synchronised tapping - internal coolant with filter - spindle oil cooling 32 TOOLS MAGASIN COOLING TROUGHT THE SPINDEL 20 BAR 12000 RPM
            x-travel 2600 mm
            y-travel 870 mm
            z-travel 760 mm
            table surface area 2300 x 970 mm
            control HEIDENHAIN TNC 530
            spindle turning speed range 12000 U/min
            spindle drive 15 kW
            32 St.
            tool adaptor BT 40
            internal coolant system feed 20 bar
            feed 10 m/min
            rapid traverse 20/20/30 m/min
            total power requirement 25 kW
            Description :
            used vertical machinig centre witH dual arm toolchanger BT 40
            HEIDENHAIN TNC 530
            - Dual toolchanger - synchronised tapping
            - internal coolant with filter
            - spindle oil cooling
            32 TOOLS MAGASIN
            COOLING TROUGHT THE SPINDEL 20 BAR
            12000 RPM


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical RECKERMANN RBZ 1050


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-053746 · milling machining centers - vertical

          RECKERMANN - RBZ 1050 - - 2014 -

          Technical details
          x-travel 1050 mm︱y-travel 560 mm︱z-travel 520 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Heidenhain iTNC530 CNC control with 4. Axis (NC-dividing head) electronical handwheel 24-fold tool changer coolant device chip conveyor Technische Daten / technical details: X-Weg / X-travel 1050 mm Y-Weg / Y-travel 560 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper HSK 63A Drehzahl / spindle speed 10000 UpM /rpm Tischaufspannfläche / table clamping area 1250x515 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Eilgang X,Y,Z / rapid feed X,Y,Z 30/30/20 m/min Antriebsleistung Spindel / drive capacity spindle 16 kW Gewicht ca. / weight ca. 4900 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            x-travel 1050 mm
            y-travel 560 mm
            z-travel 520 mm
            Description :
            Heidenhain iTNC530 CNC control
            with 4. Axis (NC-dividing head)
            electronical handwheel
            24-fold tool changer
            coolant device
            chip conveyor

            Technische Daten / technical details:
            X-Weg / X-travel 1050 mm
            Y-Weg / Y-travel 560 mm
            Z-Weg / Z-travel 520 mm
            Spindelaufnahme / spindle taper HSK 63A
            Drehzahl / spindle speed 10000 UpM /rpm
            Tischaufspannfläche / table clamping area 1250x515 mm
            Werkzeugwechselmagazinplätze / number of tool places in changer 24
            Eilgang X,Y,Z / rapid feed X,Y,Z 30/30/20 m/min
            Antriebsleistung Spindel / drive capacity spindle 16 kW
            Gewicht ca. / weight ca. 4900 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical HURON VX 8


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03984 · milling machining centers - vertical

          HURON - VX 8 - - 2013 -

          Technical details
          x-travel 820 mm︱y-travel 510 mm︱z-travel 510 mm︱total power requirement 10/14 kW︱weight of the machine ca. 5.3 t︱
          CNC SIEMENS 840 D CHIP CONVOYEUR ctx trought spindel VERYU NICE MACHINE 10000 RPM 20 TOOLS MAGASIN ISO 40 includ 4 axis
            x-travel 820 mm
            y-travel 510 mm
            z-travel 510 mm
            total power requirement 10/14 kW
            weight of the machine ca. 5.3 t
            Description :
            CNC SIEMENS 840 D
            CHIP CONVOYEUR ctx trought spindel
            VERYU NICE MACHINE
            10000 RPM
            20 TOOLS MAGASIN ISO 40
            includ 4 axis


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical MIKRON HSM 400 U-LP WPC


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-446 · milling machining centers - vertical

          MIKRON - HSM 400 U-LP WPC - - 2013 - HEIDENHAIN TNC 530

          Technical details
          x-travel 400 mm︱y-travel 240 mm︱z-travel 350 mm︱b-axis +/-110 °︱number of tools 68 ︱table: EROWA ITS 148 ︱table weight 200 Kg︱Control HEIDENHAIN TNC 530 ︱c-axis 360 °︱rapid traverse 80 m/min︱tool adaptor HSK E40 ︱Internal cooling system 18-70 bar︱Machine on 33837 ︱Spindle hours 16077 ︱weight of the machine ca. 9 t︱
            x-travel 400 mm
            y-travel 240 mm
            z-travel 350 mm
            b-axis +/-110 °
            number of tools 68
            table: EROWA ITS 148
            table weight 200 Kg
            Control HEIDENHAIN TNC 530
            c-axis 360 °
            rapid traverse 80 m/min
            tool adaptor HSK E40
            Internal cooling system 18-70 bar
            Machine on 33837
            Spindle hours 16077
            weight of the machine ca. 9 t


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical DEPO Dynamics 1009


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03635 · milling machining centers - vertical

          DEPO - Dynamics 1009 - - 2012 - HEIDENHAIN

          Technical details
          x-travel 1000 mm︱y-travel 800 mm︱z-travel 900 mm︱control HEIDENHAIN ︱type TNC 530 itnc mm︱rotary table dia. 600 mm︱spindle taper HSK 63 ︱turning speeds 18000 U/min︱workpiece weight 3000 kg︱Tool changer 30 Pos.︱ ︱table - swivable Grad︱total power requirement . kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. . m︱
          DEPO DYNAMIC 1009 • X axis (milling unit/cross slide move across): 1,000 mm • Y-axis (crossbar moves lengthways): 900 (+170) mm • Z-axis (milling unit moves vertically): 600 mm • Feed / rapid traverse X, Y and Z axis: 40,000 mm/min • Acceleration X, Y and Z axis: 5 m/s2 • Workpiece carrier – clamping surface (X/Y): 1,200 x 1,000 mm • Distance spindle nose / clamping surface: max. 750 mm • Main spindle 80 Nm, 30 KW (S1 / 100% duty cycle) - Electronic hand wheel • Chip disposal • Air supply through the inner spindle (ILZ) • Workroom enclosure complete with roof • Preparation for the coolant device option • Automatic tool changer for 30 tools, Double gripper for short changeover times • Tool measurement using a laser system The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale; it apply only our terms and conditions of sale. about us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us.
            x-travel 1000 mm
            y-travel 800 mm
            z-travel 900 mm
            control HEIDENHAIN
            type TNC 530 itnc mm
            rotary table dia. 600 mm
            spindle taper HSK 63
            turning speeds 18000 U/min
            workpiece weight 3000 kg
            Tool changer 30 Pos.
            total power requirement . kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. . m
            Description :
            DEPO DYNAMIC 1009
            • X axis
            (milling unit/cross slide move across): 1,000 mm
            • Y-axis (crossbar moves lengthways): 900 (+170) mm
            • Z-axis (milling unit moves vertically): 600 mm
            • Feed / rapid traverse X, Y and Z axis: 40,000 mm/min
            • Acceleration X, Y and Z axis: 5 m/s2
            • Workpiece carrier – clamping surface (X/Y): 1,200 x 1,000 mm
            • Distance spindle nose / clamping surface: max. 750 mm
            • Main spindle 80 Nm, 30 KW (S1 / 100% duty cycle)
            - Electronic hand wheel
            • Chip disposal
            • Air supply through the inner spindle (ILZ)
            • Workroom enclosure complete with roof
            • Preparation for the coolant device option
            • Automatic tool changer for 30 tools,
            Double gripper for short changeover times
            • Tool measurement using a laser system


            The tech. Data are manufacturer or operator information and therefore for us
            not binding. We reserve the right to prior sale; it apply
            only our terms and conditions of sale.

            about us
            more than 400 own machines in stock
            over 12000 m² storage area, crane capacity 70 t
            more than 10000 articles accessories for your workshop
            You want to sell machines, production lines or your company,
            Then contact us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical HURON VX 12


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03762 · milling machining centers - vertical

          HURON - VX 12 - - 2012 -

          Technical details
          x-travel 1220 mm︱y-travel 600 mm︱z-travel 610 mm︱total power requirement 10/14 kW︱weight of the machine ca. 10 t︱
          CNC SIEMENS 828 D CHIP CONVOYEUR VERYU NICE MACHINE 10000 RPM 20 TOOLS MAGASIN ISO 40
            x-travel 1220 mm
            y-travel 600 mm
            z-travel 610 mm
            total power requirement 10/14 kW
            weight of the machine ca. 10 t
            Description :
            CNC SIEMENS 828 D
            CHIP CONVOYEUR
            VERYU NICE MACHINE
            10000 RPM
            20 TOOLS MAGASIN ISO 40


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical BRIDGEPORT XR1000


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5665 · milling machining centers - vertical

          BRIDGEPORT - XR1000 - - 2012 - Heidenhain 530

          Technical details
          x-travel 1020 mm︱y-travel 610 mm︱z-travel 610 mm︱control Heidenhain 530 ︱total power requirement kW︱weight of the machine ca. 7000 kg︱dimensions of the machine ca. m︱
            x-travel 1020 mm
            y-travel 610 mm
            z-travel 610 mm
            control Heidenhain 530
            weight of the machine ca. 7000 kg


        • Hop Machines
        • Wethouder Lindersstraat 145
        • 5455 GK Wilbertoord
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical MICROMILL VMC 1600 F


          • Siegfried Volz Werkzeugmaschinen
          • Rüschebrinkstr. 151-153
          • 44143 Dortmund
          • Deutschland

          • +49 (0) 231 3344544
            +49 (0) 231 3344533
          • info@sv-wzm.de
            www.sv-wzm.de
          #2073-III2222 · milling machining centers - vertical

          MICROMILL - VMC 1600 F - - 2012 -

          Technical details
          x-travel 1615 mm︱y-travel 815 mm︱z-travel 725 mm︱table-size 1800 x 800 mm︱total power requirement 15 / 18,5 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. m︱
            x-travel 1615 mm
            y-travel 815 mm
            z-travel 725 mm
            table-size 1800 x 800 mm
            total power requirement 15 / 18,5 kW
            weight of the machine ca. 10 t


        • Siegfried Volz Werkzeugmaschinen
        • Rüschebrinkstr. 151-153
        • 44143 Dortmund
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          •   
          •