Double Column Milling M-C - Gantry Type

SD(W)-36|SD(W)-42|SD(W)-4 ︱x-travel 6000/8000/10000/12000/140 mm︱y-travel 3600|4200|4800|5400 mm︱z-travel SD: 1100 mm (1400/1500) S mm︱distance between columns 3650I4250|4850|5450 mm︱w-axis 1500/2000 mm für SD(W) ︱table width 2800|3400|4000|4600 mm︱table length = X-Weg ︱distance spindle nose and table SD: 1080mm ~2180mm (1020m ︱spindle cone SK 50/BT 50 ︱turning speeds 6000 U/min (mehr auf Anfr ︱spindle drive 22/26 kW (mehr auf Anfrag ︱feed speeds X/Y/Z/W: 10/10/10/1 m/min︱machine length 13,5m~43,5 m︱machine width 7,7|8,1|8,5|8,9 m︱Weight approx. 60t+3t/m|65t+3,3t/m|70t+3 ︱automatic tool changer 32-fach ︱CNC controller Siemens/Heidenhain/Fanuc ︱ ︱3 chip conveyor ︱

---

SD(W)-24 | SD(W)-28 | SD( ︱x-travel 6000/8000/10000/12000/140 mm︱y-travel 2400|2800|3200 mm︱z-travel 1100/1400 mm︱distance between columns 2450|2850|3250 mm︱w-axis 1500/2000 mm für SD(W) ︱table width 1600|2000|2400 mm︱table length = X-Weg ︱distance spindle nose and table SD: 1080mm ~2180mm (1020m ︱spindle cone SK 50/BT 50 ︱turning speeds 6000 U/min (mehr auf Anfr ︱spindle drive 22/26 kW (mehr auf Anfrag ︱feed speeds X/Y/Z/W: 12/12/10/1 m/min︱machine length 13,5m~43,5 m︱machine width 6,5|6,9|7,3 m︱Weight approx. 50t+2t/m|53t+2,3t/m|56t+2 ︱automatic tool changer 32-fach ︱CNC controller Siemens/Heidenhain/Fanuc ︱ ︱3 chip conveyor ︱

---

HDT-18|HDT-21|HDT-24 ︱x-travel 2000/4000/6000/8000/10000 mm︱y-travel 1800|2100|2400 mm︱z-travel 800/1000 mm︱distance between columns 1850|2150|2450 mm︱w-axis N/A ︱table width 1200|1500|1800 mm︱table length = X-Weg ︱distance spindle nose and table 555~1355 mm︱spindle cone SK 50/BT 50 ︱turning speeds 6000 U/min (mehr auf Anfr ︱spindle drive 18,5/22 kW (mehr auf Anfr ︱feed speeds X/Y/Z: 15/15/12 m/min︱machine length 6,5~23,5 m︱machine width 5,9|6,2|6,5 m︱Weight approx. 20t+2t/m|22t+2t/m|24t+2,5 ︱automatic tool changer 32-fach ︱CNC controller Siemens/Heidenhain/Fanuc ︱ ︱3 chip conveyor ︱

---

x-travel 2000/4000/6000/8000/10000 mm︱y-travel 1300 mm︱z-travel 800 mm︱distance between columns 1350 mm︱table width 1000 mm︱table length = X-Weg ︱distance spindle nose and table 220~1020 mm︱spindle cone SK 50/BT 50 ︱turning speeds 6000 U/min (mehr auf Anfr ︱spindle drive 18,5/22 kW (mehr auf Anfr ︱feed speeds X/Y/Z: 15/15/12 m/min︱machine length 6,5~23,5 m︱machine width 4,5 m︱Weight approx. 18t+2t/m ︱automatic tool changer 32-fach ︱CNC controller Siemens/Heidenhain/Fanuc/ ︱ ︱3 chip conveyor ︱chip conveyor ︱automatic stepless gear box ︱

---

︱x-travel 3000/4000/5000/6000/8000 mm︱y-travel mm︱z-travel mm︱distance between columns mm︱w-axis ︱table width mm︱table length ︱distance spindle nose and table ︱spindle cone ︱turning speeds ︱spindle drive ︱feed speeds m/min︱machine length m︱machine width m︱Weight approx. ︱automatic tool changer 8 ︱CNC controller ︱ ︱3 chip conveyor ︱

---

x-travel 3.000 mm︱y-travel 1.600 mm︱z-travel 1.200 mm︱control HEIDENHAIN iTNC530 HSCI ︱B-axis (swivelling head) +/- 100 °︱C-axis (milling head rotation axis) +/- 240 °︱feed and rapid traverse : ︱rapid feed Y,X,Z 40.000 m/min︱Rapid traverse B- and C-Axis 50 rpm︱Accelerations (X, Y and Z) 4 m/s²︱Machine table: : ︱Clamping surface 3.500 x 1.750 mm︱T-slots 27 x 22 mm H12 ︱T-slot - distance 125 mm︱max. workpiece load 7.000 kg/m2︱Max. distance table to spindle nose 1.356 mm︱2-Axis Fork Milling Head T21C ︱turning speed range: 10- 24.000 min-1︱Drive power (S1/S6): 42/50 KW︱Torque (S1/S6): 67/84 Nm︱

---

Equipment / Accessories • 5-axis vertical portal milling machine in Gantry design. • Fork milling head T21C for simultaneous milling operation with FISCHER spindle, 42kW, 67Nm, 24.000 rpm, HSK-A63 • Manually operated textile roof • Tool changer chain 50-fold, change orientation vertical • 3D probe for workpiece measurement • Process monitoring system MONTRONIX incl. installed vibration sensors for detection of abnormal vibrations during the machining process. Alarm triggering, feed rate reduction or machine stop are carried out via the control system • HEIDENHAIN HR550 handwheel (wireless) • BLUM LaserControl NT for non-contact tool measurement with automatic cover, enables increased process reliability through automatic form and wear control of the tools used • Coolant system KNOLL for cooling lubrication with supply via spray nozzles and supply through the main spindle (ICS) • TRIMILL Kinematics - application for rotary axes • TRIMILL Teleservice - remote support • Linear, absolute and direct path measuring systems make HEIDENHAIN in X, Y and Z axis with a resolution of 0,001mm • Hydraulic power unit • 1 lubrication unit for the machine • 1 lubrication unit for the milling spindle • 1 cooling unit for cooling the milling head • 1 cooling unit for cooling the axis motors • 1 pc. Air extraction unit for oil and cooling lubricant emulsion with three-stage filtering, power consumption 2.2 kW, max. extraction capacity 2,000 m³. Extraction capacity 2.000 m³/h • 2 scraper belt conveyors, positioned along the X-axis to the left and right of the machine table, discharge height approx. 1,050mm program hours on the machine: approx. 8.000h

x-travel 14000 mm︱y-travel 3100 mm︱z-travel 1.200 mm (220 - 1.420) mm︱distance between columns 4.417 mm︱table-size 14.000 x 2.500 mm︱workpiece weight 15.000 kg/m︱drive capacity - spindle motor 25 kW︱spindle cone 63 HSK︱spindle turning speed range 18000 rpm︱milling feeds 30000 mm/min︱dimensions of the machine ca. 15.000 x 8.418 x 6.033 mm︱weight of the machine ca. 135 t︱MPG hand wheel ︱Machine semi-cover ︱CNC controller SIEMENS 840 D ︱universal milling head 5 Achsen mit “C5C” Elektr ︱automatic tool changer 24 fach︱

---

x-travel 11.450 mm︱y-travel 3.500 mm︱z-travel 1.250 mm︱Control SINUMERIK 840D ︱total power requirement 130 kVA︱weight of the machine ca. 112 t︱dimensions of the machine ca. 22,6 x 8,0 x 6,3 m︱

---

Double Column Milling M/C - Gantry Type Brand: FOREST-LINE ALBERT / Type: MODUMILL 300G / Year of construction: 1999 Extensive modernizations in 2008 and 2021. Machine with interchangeable vertical and horizontal milling heads with automatic indexing. The machine can be inspected by appointment under working condition. Very well-kept, continuously maintained condition! TECHNICAL DATA: - CNC Control: SINUMERIK 840D - Travels X/Y/Z: 11.450 / 3.500 / 1.250 mm Cross-section of the Z-axis slider: 360 x 360 mm - Gantry passage: 3.000 - Height below vertical spindle: 1.400 mm - Working clamping width: 2.500 mm - Fixed table dimensions: 5.000 x 2.500 mm - Longitudinal pallet system EQUIPMENT: - Tool changer (chain magazine): 80-positions - Cooling through the spindle centre - 2 chip conveyors - Gantry panelling - Touch probe, Brand: RENISHAW - Electronic hand wheel - Remote diagnosis - Tool management and wear management - CE marking Electrical connection values: - Total power requirement: 130 kVA - External dimensions of the machine: 22,6 x 8,0 x 6,3 m There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

x-travel 6000 mm︱y-travel 2500 mm︱z-travel 950 mm︱distance between columns 2400 mm︱Height of spindle 1200 mm︱bed width 2115 mm︱bed length 6000 mm︱table load 4 t/m2︱rapid travel x/y/z 10000 mm/min︱feeds infinitely variable 1-3000 mm/min︱Rated capacity of drive motor 20 kW︱Cross cut of slide 320x340 mm︱Positioning increment 2.5 °︱Turning speeds stepless 10-3200 U/min︱Tool tapers ISO 50 ︱tool piece magazine with 20 ︱Control NUM 1060 ︱total power requirement 60 kVA︱dimensions of the machine ca. - m︱weight of the machine ca. - t︱

---

equipped with: - CNC - Control NUM 1060 - ATC with 20 tools(ISO 50) - 2-Axis Milling Head 2,5° x 2,5° - Covering - Cooling through Spindle 15bar - Chip Conveyor

x-travel 16500 mm︱y-travel 6000 mm︱z-travel 600 mm︱w-axis 2915 mm︱surface area 16460 x 4875 mm︱table load 200 t︱distance between columns 5590 mm︱distance table - lower edge spindle 45 - 3580 mm︱spindle diameter 152 mm︱spindle motor 30 kW︱spindle taper ISO 50 ︱spindle turning speed range 25 - 600 U/min︱feed in x - axis 6,3 m/min︱feed in y - axis 3 m/min︱control SIEMENS 840C ︱total power requirement kW︱weight of the machine ca. 300 t︱dimensions of the machine ca. 30 x 10 x 9 m︱

---

- 1995 retrofitted with CNC control SIEMENS 840 C - universal milling heads - 2 milling heads on crossrail with ram-section 420 x 420 mm - crossrail movement by ac motor and with hydr. clamping - measuring system for x- and y-axis via rack/shaft - column movement by double rack/pinion - floor plate

x-travel 2000 mm︱y-travel 850 mm︱z-travel 710 mm︱total power requirement kW︱weight of the machine ca. 6800 kg︱dimensions of the machine ca. m︱

---

x-travel 500 mm︱y-travel 240 mm︱z-travel 530 mm︱Control SIEMENS 802S base line ︱table-size 750 x 210 mm︱spindle taper ER32 ︱throat 260 mm︱spindle turning speed range 150 - 8.600 U/min︱feed speeds 2.000 mm/min︱total power requirement 3,0 kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 1,9 x 1x2 x 1,9 m︱

---

Machine comes from a university and was used sporadically. including vice including electric Handwheel including work light including coolant pump including machine feet including central lubrication Stable CNC milling machines with professional Siemens 802 S baseline control, ideal for users in mold making Ball screw spindle from HIWIN in all axes Solid, precise cross table, large dimensions and precisely surface-machined. Heavy, solid cast design Adjustable wedge strips Very wide speed range Continuously variable drive Electronic handwheel reduces setup time to a minimum Compact housing design Foldable housing side parts for easy access to the machine The work area is clearly visible from three sides thanks to clear Macrolon panes Base is designed on two sides. Front with access to the coolant tank Rear with access to the electronics and the Optimum CNC controller IV Siemens Micromaster as a frequency converter All doors with safety switches ER32: for high speed and normal machining Linear guide in the Z axis Central lubrication

x-travel 980 mm︱y-travel 1080 mm︱z-travel 280 mm︱Control ︱table-size 1.125 x 1.700 mm︱table height 800 mm︱diameter 435 mm︱spindle pitch 16 x 5 mm︱total power requirement kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 2,08 x 1,98 x 2,0 m︱

---

Accessories: - Tool changing station - TS20 probe - Clamping system

travel -x axis 760 mm︱travel -y axis 510 mm︱travel -z axis 610 mm︱control for program Ultimax 4 ︱turning speeds 10.000 U/min︱numbers of positions in the tool changer 24 ︱tool taper SK40 ︱table-size 1.020 x 510 mm︱

---

Milling Machine - Vertical | HUROC - VMX 30 equipped with ITC. The machine is in very good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMX30 | VMX-30

travel -x axis 705 mm︱travel -y axis 425 mm︱travel -z axis 610 mm︱control Heidenhain - iTNC 530 ︱turning speed range 50 - 20.000 U/min︱numbers of positions in the tool changer 32 ︱tool taper SK30 ︱

---

Universal Milling Machine | FEHLMANN - Picomax 90-M Scope of delivery: - extensive package of tools - dividing head (4th axis) The machine is in a well-maintained condition. Please refer to the offer for further technical details. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PICOMAX90M | PICOMAX90 M | PICOMAX-90 M

travel -x axis 6.000 mm︱travel -y axis 1.000 mm︱travel -z axis 800 mm︱control Heidenhain - iTNC530 ︱distance vertical spindle / table 1.000 mm︱table-size 3.300 x 1.050 mm︱number of T-slots 7 ︱T-slot - width 125 ︱

---

Travelling column milling machine | IBARMIA - ZV-58 / L6000 Further information / scope of delivery: - Clamping system mounted on the table (see pictures) - Normal T-slot table installed under clamping system - Renishaw probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZV-58 L6000 | ZV-58 / L 6000 | ZV58L6000

x-travel 700 mm︱y-travel 315 mm︱z-travel 495 mm︱table surface area 1.230 x 410 mm︱quill travel 180 mm︱control Heidenhain TNC 426 ︱tool changer: ︱number of tool places 32 Pos.︱tool taper SK 30 ︱total power requirement 20 kW︱weight of the machine ca. 3,4 t︱

---

In our opinion, the machine is in very good condition and can be viewed under power by appointment. Technical features: - incl. 4th axis - Operating hours: 73,730 h - Spindle hours: 16,362 h Accesories: - Renishaw measuring probe ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 700 mm︱y-travel 315 mm︱z-travel 495 mm︱table surface area 1.230 x 410 mm︱quill travel 180 mm︱control Heidenhain TNC 426 ︱tool taper SK 30 ︱total power requirement 20 kW︱weight of the machine ca. 3,2 t︱

---

In our opinion, the machine is in very good condition and can be viewed under power by appointment. Technical features: - incl. 4th axis - Operating hours: 66,200 h - Spindle hours: 21,900 h Accesories: - Renishaw measuring probe ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 500 mm︱y-travel 160 mm︱z-travel 400 mm︱

---

x-travel 600 mm︱y-travel 400 mm︱z-travel 420 mm︱Control Heidenhain Tnc ︱table-size 900 x 460 mm︱turning speeds 4000 U/min︱total power requirement kW︱weight of the machine ca. 2,9 t︱dimensions of the machine ca. 3 x 2 x 2 m︱

---

x-travel 600 mm︱y-travel 350 mm︱z-travel 140 mm︱table surface area 700 x 300 mm︱spindle taper ISO 40 ︱spindle turning speed range 100 - 4000 U/min︱distance spindle center to column 395 mm︱distance spindle nose and table min. 170 -max. 550 mm︱control TNC 407 ︱milling feeds 3 + 2000 mm/min︱rapid traverse 5000 mm/min︱spindle drive 5,5 kW︱total power requirement 9 kW︱weight of the machine ca. 1,9 t︱dimensions of the machine ca. 2,5 x 1,8 x 2,2 m︱

---

• control HEIDENHAIN TNC 407,

x-travel 1500 mm︱y-travel 1000 mm︱z-travel 700 mm︱table: 1500 x 1000 mm︱control FIDIA ︱weight of the machine ca. 11 t︱

---

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Year ca, 1988 ︱tool taper MK 3 ︱weight of the machine ca. 2,5 t︱digital ︱cross-moving table ︱feed: ︱

---

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

CNC brand Heidenhain ︱Table length 1600 mm︱Table width 680 mm︱X 1450 mm︱Y 850 mm︱Z 750 mm︱Spindle taper ISO 50 ︱Speed 40 - 1800 RPM︱Machine dimensions (lxwxh) 3910 x 3050 x 2650 mm︱Machine weight 7500 kg︱

---