,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Drilling and Milling M-C

          Machinelist: Drilling and Milling M/C


          Drilling and Milling M/C

          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C ACIERA 23 TR 50/51


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1719 · Drilling and Milling M/C

          ACIERA - 23 TR 50/51 - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 28 mm︱x-travel 400 mm︱y-travel 285 mm︱turning speeds 45-4000 U/min︱total power requirement 3,6 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. LBH 2,0 x 1,4 x 2,1 m︱
          - POS+MAT table - ALBRECHT tool quick change system - Vices
            bore capacity in steel (diameter. 28 mm
            x-travel 400 mm
            y-travel 285 mm
            turning speeds 45-4000 U/min
            total power requirement 3,6 kW
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. LBH 2,0 x 1,4 x 2,1 m
            Description :
            - POS+MAT table
            - ALBRECHT tool quick change system
            - Vices


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C JUARISTI JUARISTI TX1


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-739 · Drilling and Milling M/C

          JUARISTI - JUARISTI TX1 - - 2008 - iTNC 530

          Technical details
          x-travel 2.500 mm︱y-travel 1.500 mm︱z-travel 1.500 mm︱Control iTNC 530 ︱tool taper DIN 69871 AD ︱rotary table 1.250 x 1.600 mm/min︱tool magazin: 40 pos.︱feed 25 m/min︱milling head -swivable +/- 2,5 x 2,5 °︱Bolt ISO 50 DIN 69871/1-AD ︱turning speeds 871-3.000 U/min︱transmission ratio 2 ︱Internal cooling system 20 bar︱handwheel HR 420 ︱total power requirement 80 kWA︱weight of the machine ca. 35 t︱dimensions of the machine ca. m︱
            x-travel 2.500 mm
            y-travel 1.500 mm
            z-travel 1.500 mm
            Control iTNC 530
            tool taper DIN 69871 AD
            rotary table 1.250 x 1.600 mm/min
            tool magazin: 40 pos.
            feed 25 m/min
            milling head -swivable +/- 2,5 x 2,5 °
            Bolt ISO 50 DIN 69871/1-AD
            turning speeds 871-3.000 U/min
            transmission ratio 2
            Internal cooling system 20 bar
            handwheel HR 420
            total power requirement 80 kWA
            weight of the machine ca. 35 t


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HUVEMA HU.25 VHG


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-23534 · Drilling and Milling M/C

          HUVEMA - HU.25 VHG - - 2006 -

          Technical details
          bore capacity in steel (diameter) 25 mm︱bore stroke 150 mm︱spindle taper ISO 40115 - 1750 mm︱ mm︱ 600 mm︱ 350 mm︱ 350 mm︱table surface area 800 x 240 mm︱max. distance between table and spindle-nose mm︱connected load frequency 400 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. 1,6 x 1,4 x 2,1 m︱
          Equipment: - Digital display - Horizontal spindle - Quill with hand feed - motor feed for X - Left/right running - Emergency stop switch - Drill head swiveling - Spindle protection - Machine light
            bore capacity in steel (diameter. 25 mm
            bore stroke 150 mm
            spindle taper ISO 40
            115 - 1750 mm
            600 mm
            350 mm
            350 mm
            table surface area 800 x 240 mm
            connected load frequency 400 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,7 t
            dimensions of the machine ca. 1,6 x 1,4 x 2,1 m
            Description :
            Equipment:
            - Digital display
            - Horizontal spindle
            - Quill with hand feed
            - motor feed for X
            - Left/right running
            - Emergency stop switch
            - Drill head swiveling
            - Spindle protection
            - Machine light


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C FEHLMANN Picomax 54


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4653 · Drilling and Milling M/C

          FEHLMANN - Picomax 54 - - 1999 - HEIDENHAIN TNC310

          Technical details
          bore capacity in steel (diameter) 25 mm︱x-travel 500 mm︱y-travel 260 mm︱cross-moving table 880x320mm ︱spindle turning speed - stepless 100-9000 U/min︱control HEIDENHAIN TNC310 ︱vertical movement 480 mm︱quill stroke 160 mm︱weight of the machine ca. 2.2 t︱
          Misc accessories www.marcels-maschinen.ch
            bore capacity in steel (diameter. 25 mm
            x-travel 500 mm
            y-travel 260 mm
            cross-moving table 880x320mm
            spindle turning speed - stepless 100-9000 U/min
            control HEIDENHAIN TNC310
            vertical movement 480 mm
            quill stroke 160 mm
            weight of the machine ca. 2.2 t
            Description :
            Misc accessories

            www.marcels-maschinen.ch



        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C Castel GREEN 1T4


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1622 · Drilling and Milling M/C

          Castel - GREEN 1T4 - - 1997 -

          Technical details
          bore capacity in steel (diameter) 110 mm︱x-travel 2.100 mm︱y-travel 1.500 mm︱z-travel 1.000 mm︱w-travel 500 ︱control HEIDENHAIN TNC 430 ︱connected load kVA︱Working Spindle - ︱boring quill diameter 110 mm︱spindle taper DIN 69871 ISO 50 ︱spindle power 22 kW︱transmission ratio 2 ︱turning speed range 2.000 U/min︱clamping table - ︱max. workpiece weight 4.000 kg︱surface area 1.100 x 1.300 mm︱feeds ︱feed range X-, Y-, Z- axis 0 – 10.000 mm/min︱feed range W-axis 0 - 10.000 mm/min︱rapid motion - x-axis 10.000 mm/min︱
          Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump
            bore capacity in steel (diameter. 110 mm
            x-travel 2.100 mm
            y-travel 1.500 mm
            z-travel 1.000 mm
            w-travel 500
            control HEIDENHAIN TNC 430
            Working Spindle -
            boring quill diameter 110 mm
            spindle taper DIN 69871 ISO 50
            spindle power 22 kW
            transmission ratio 2
            turning speed range 2.000 U/min
            clamping table -
            max. workpiece weight 4.000 kg
            surface area 1.100 x 1.300 mm
            feed range X-, Y-, Z- axis 0 – 10.000 mm/min
            feed range W-axis 0 - 10.000 mm/min
            rapid motion - x-axis 10.000 mm/min
            Description :
            Equipment.
            • CNC-control HEIDENHAIN 430
            • support bearing
            • manual milling head
            • coolant tank with pump




        • FLECKENSTEIN Werkzeugmaschinen GmbH
        • Sommerweg 15
        • 63831 Wiesen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C FEHLMANN PICOMAX 100 CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-721324 · Drilling and Milling M/C

          FEHLMANN - PICOMAX 100 CNC - - 1985 - HEIDENHAIN TNC 150

          Technical details
          bore capacity in steel (diameter) 30 mm︱x-travel 850 mm︱y-travel 435 mm︱Control HEIDENHAIN TNC 150 ︱total power requirement 16 kW︱weight of the machine ca. 3500 kg︱dimensions of the machine ca. m︱
          F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A * Year 1985 Serial No. 16 085 109 _______________________________________________________________ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Spindle taper SF 32 Spindle quill travels 210 mm Drilling Capacity approx.. 30 mm Spindle speeds steplessly adjustable 50 – 2,500 rpm Feeds steplessly adjustable 1 – 8.000 mm/Min. Quick feed 8.000 mm/Min. Spindle drive, approx. 6 kW Total electrical load 16 kW - 400 V - 50 Hz Weight, approx. 3,500 kg Accessories / Special Features: * HEIDENHAIN – CNC Path Control System Model TNC 150 with colour Screen Grafik, Subroutines, cycles, Threading cycles, Milling Cycles, etc. Mobile Control unit with electronic handwheel. Ideal for quick set-up and approach to the workpiece. * The quill movement can be actuated manually or also by the CNC-Control, * The Drilling depth can be presetted by a 12 fold turret drum for different quillstops and with a digital display of the values on monitor. * The complete Milling/Drilling head can be positioned in 3 different heights and with automatic clamping. * Hi Precision Coordinate table controlled by the XY – CNC axis with hardened ball screw spindles. * With quick change tool holders, chucks, millers, etc. and with coolant device. Condition : Very Good to excellent - Machine under power, ideal for small batch production Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
            bore capacity in steel (diameter. 30 mm
            x-travel 850 mm
            y-travel 435 mm
            Control HEIDENHAIN TNC 150
            total power requirement 16 kW
            weight of the machine ca. 3500 kg
            Description :
            F E H L M A N N (Switzerland)
            CNC-Controlled High Precision Drilling and Milling Machine with
            HEIDENHAIN CNC-Control Model TNC 150
            Model PICOMAX 100 CNC – 2 + A * Year 1985 Serial No. 16 085 109
            _______________________________________________________________

            Table travel: Longitudinal ( X-Axis) 850 mm
            Cross (Y-Axis) 435 mm
            Milling/Boring head travel vertical ( Z-Axis) 210 mm

            Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm

            Mounting height below spindle, approx. 140 / 690 mm
            Height adjustment of Milling head max. 540 mm
            Distance between spindle and column 450 mm

            Spindle taper SF 32
            Spindle quill travels 210 mm
            Drilling Capacity approx.. 30 mm

            Spindle speeds steplessly adjustable 50 – 2,500 rpm
            Feeds steplessly adjustable 1 – 8.000 mm/Min.
            Quick feed 8.000 mm/Min.

            Spindle drive, approx. 6 kW
            Total electrical load 16 kW - 400 V - 50 Hz
            Weight, approx. 3,500 kg

            Accessories / Special Features:

            * HEIDENHAIN – CNC Path Control System Model TNC 150 with colour Screen
            Grafik, Subroutines, cycles, Threading cycles, Milling Cycles, etc.
            Mobile Control unit with electronic handwheel. Ideal for quick set-up and
            approach to the workpiece.
            * The quill movement can be actuated manually or also by the CNC-Control,
            * The Drilling depth can be presetted by a 12 fold turret drum for different
            quillstops and with a digital display of the values on monitor.
            * The complete Milling/Drilling head can be positioned in 3 different heights
            and with automatic clamping.
            * Hi Precision Coordinate table controlled by the XY – CNC axis with hardened
            ball screw spindles.
            * With quick change tool holders, chucks, millers, etc. and with coolant
            device.

            Condition : Very Good to excellent - Machine under power, ideal for
            small batch production
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.




        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C ACIERA 23 TR 50


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-717512 · Drilling and Milling M/C

          ACIERA - 23 TR 50 - - 1980 -

          Technical details
          bore capacity in steel (diameter) 23 mm︱x-travel 400 mm︱y-travel 285 mm︱total power requirement 3 kW︱weight of the machine ca. 1.400 kg︱dimensions of the machine ca. m︱
            bore capacity in steel (diameter. 23 mm
            x-travel 400 mm
            y-travel 285 mm
            total power requirement 3 kW
            weight of the machine ca. 1.400 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM BF 25


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76016 · Drilling and Milling M/C

          HBM - BF 25 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 170 mm︱bore stroke 50 mm︱ 16 mm︱spindle taper MK 2 ︱spindle turning speed range 50 - 3000 U/min︱ 280 mm︱ 155 mm︱table surface area 500 x 180 mm︱connected load frequency 230 V︱max. distance between table and spindle-nose max. 320 mm︱total power requirement 0,8 kW︱weight of the machine ca. 150 Kg︱dimensions of the machine ca. 670 x 550 x 910 m︱
          Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!
            bore capacity in steel (diameter. 25 mm
            throat 170 mm
            bore stroke 50 mm
            16 mm
            spindle taper MK 2
            spindle turning speed range 50 - 3000 U/min
            280 mm
            155 mm
            table surface area 500 x 180 mm
            connected load frequency 230 V
            max. distance between table and . max. 320 mm
            total power requirement 0,8 kW
            weight of the machine ca. 150 Kg
            dimensions of the machine ca. 670 x 550 x 910 m
            Description :
            Drilling and milling machine with
            - variable spindle speed
            - Digital depth display
            - Left / right switch
            - Cross support
            - swiveling spindle head
            - Feeds via hand crank
            - Tool case with content
            but without digital display !!


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM 40 H/V


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76022 · Drilling and Milling M/C

          HBM - 40 H/V - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 275 mm︱bore stroke 120 mm︱spindle taper MK 4 ︱turning speed range 75 - 3200 U/min︱ 190 mm︱ 490 mm︱table surface area 730 x 210 mm︱connected load frequency 400 V︱boring feeds: 0,1 - 0,18 - 0,26 mm/U︱total power requirement 1,1/1,5 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 0,8 x 0,75 x 1,85 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 40 mm
            throat 275 mm
            bore stroke 120 mm
            spindle taper MK 4
            turning speed range 75 - 3200 U/min
            190 mm
            490 mm
            table surface area 730 x 210 mm
            connected load frequency 400 V
            boring feeds: 0,1 - 0,18 - 0,26 mm/U
            total power requirement 1,1/1,5 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 0,8 x 0,75 x 1,85 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM 40 H


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76020 · Drilling and Milling M/C

          HBM - 40 H - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 275 mm︱bore stroke 120 mm︱spindle taper MK 4 ︱turning speed range 75 - 3200 U/min︱ 190 mm︱ 490 mm︱table surface area 700 x 210 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱total power requirement 1,1/1,5 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 0,8 x 0,75 x 1,85 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 40 mm
            throat 275 mm
            bore stroke 120 mm
            spindle taper MK 4
            turning speed range 75 - 3200 U/min
            190 mm
            490 mm
            table surface area 700 x 210 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            total power requirement 1,1/1,5 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 0,8 x 0,75 x 1,85 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C KAMI FKM 350-1 PD / SK40


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76005 · Drilling and Milling M/C

          KAMI - FKM 350-1 PD / SK40 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 290 mm︱bore stroke 130 mm︱spindle taper SK 40 ︱spindle turning speed range 75 - 3200 U/min︱ 500 mm︱ 230 mm︱table surface area 720 x 210 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱total power requirement 1,1 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 1,1 x 0,9 x 1,2 m︱
          domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.
            bore capacity in steel (diameter. 40 mm
            throat 290 mm
            bore stroke 130 mm
            spindle taper SK 40
            spindle turning speed range 75 - 3200 U/min
            500 mm
            230 mm
            table surface area 720 x 210 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            total power requirement 1,1 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 1,1 x 0,9 x 1,2 m
            Description :
            domestic equipments
            • Digital display
            • Digital depth gauge for quill
            • Adjustable guides with wedges
            • Large 12-speed range from 75 to 3200 rpm
            • Smooth running due to hardened and ground gears running in an oil bath •
            • Right-left rotation
            • Prismatic guides in all axes
            • Gear head can be swiveled 90 °
            • Chip protection with safety circuit

            Machine base optional.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM TYP 16


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76011 · Drilling and Milling M/C

          HBM - TYP 16 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 16 mm︱throat 180 mm︱bore stroke 85 mm︱spindle taper MK 2 ︱spindle diameter 47 mm︱spindle turning speed range 320 - 3300 U/min︱ 230 mm︱ 100 mm︱table surface area 420 x 155 mm︱connected load frequency 230 V︱ 900 x 600 x 300 cm︱total power requirement 0,75 kW︱weight of the machine ca. 8o Kg︱dimensions 0,7 x 0,7 x 0,8 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 16 mm
            throat 180 mm
            bore stroke 85 mm
            spindle taper MK 2
            spindle diameter 47 mm
            spindle turning speed range 320 - 3300 U/min
            230 mm
            100 mm
            table surface area 420 x 155 mm
            connected load frequency 230 V
            900 x 600 x 300 cm
            total power requirement 0,75 kW
            weight of the machine ca. 8o Kg
            dimensions 0,7 x 0,7 x 0,8 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM BF 45 Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76001 · Drilling and Milling M/C

          HBM - BF 45 Profi - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 45 mm︱throat 230 mm︱bore stroke 125 mm︱spindle taper ISO 30 ︱spindle turning speed range 75 - 1600 U/min︱max. milling cutter diameter 80 mm︱ 560 mm︱ 230 mm︱table surface area 800 x 240 mm︱max. distance between table and spindle-nose 460 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 320 Kg︱dimensions of the machine ca. 1,0 x 0,8 x 1,45 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 45 mm
            throat 230 mm
            bore stroke 125 mm
            spindle taper ISO 30
            spindle turning speed range 75 - 1600 U/min
            max. milling cutter diameter 80 mm
            560 mm
            230 mm
            table surface area 800 x 240 mm
            max. distance between table and . 460 mm
            connected load frequency 230 V
            total power requirement 1,1 kW
            weight of the machine ca. 320 Kg
            dimensions of the machine ca. 1,0 x 0,8 x 1,45 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C KAMI BKM 4040


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76021 · Drilling and Milling M/C

          KAMI - BKM 4040 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 290 mm︱bore stroke 115 mm︱spindle taper SK 40 ︱spindle turning speed range 70 - 3200 U/min︱ 350 mm︱ 130 mm︱table surface area 590 x 190 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱feed 0,1 - 0,18 - 0,26 mm/U︱total power requirement 1,1 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 0,7 x 0,95 x 1,75 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 40 mm
            throat 290 mm
            bore stroke 115 mm
            spindle taper SK 40
            spindle turning speed range 70 - 3200 U/min
            350 mm
            130 mm
            table surface area 590 x 190 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            feed 0,1 - 0,18 - 0,26 mm/U
            total power requirement 1,1 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 0,7 x 0,95 x 1,75 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C KAMI FKM 349 V


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76008 · Drilling and Milling M/C

          KAMI - FKM 349 V - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 185 mm︱bore stroke 50 mm︱spindle taper MK 3 ︱spindle turning speed range 50 - 2500 U/min︱ 178 mm︱ 480 mm︱table surface area 700 x 180 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 160 t︱dimensions of the machine ca. 0,75 x 0,8 x 0,9 m︱
          domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.
            bore capacity in steel (diameter. 25 mm
            throat 185 mm
            bore stroke 50 mm
            spindle taper MK 3
            spindle turning speed range 50 - 2500 U/min
            178 mm
            480 mm
            table surface area 700 x 180 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 160 t
            dimensions of the machine ca. 0,75 x 0,8 x 0,9 m
            Description :
            domestic equipments
            • Digital depth gauge
            • Adjustable guides with wedges
            • Large 12-speed range from 75 to 3200 rpm
            • Smooth running due to hardened and ground gears running in an oil bath •
            • Right-left rotation
            • Prismatic guides in all axes
            • Gear head can be swiveled 90 °
            • Chip protection with safety circuit

            Machine base optional.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C KAMI FKM 650A


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76002 · Drilling and Milling M/C

          KAMI - FKM 650A - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 50 mm︱throat 360 mm︱bore stroke 150 mm︱spindle turning speed range 120 - 3000 U/min︱spindle taper SK 40650 mm︱ 320 mm︱vertical adjustment 500 mm︱table surface area 1000 x 300 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,85 t︱dimensions of the machine ca. 1,25 x 1.5 x 2,3 m︱
          New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system
            bore capacity in steel (diameter. 50 mm
            throat 360 mm
            bore stroke 150 mm
            spindle turning speed range 120 - 3000 U/min
            spindle taper SK 40
            650 mm
            320 mm
            vertical adjustment 500 mm
            table surface area 1000 x 300 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            total power requirement 2,2 kW
            weight of the machine ca. 0,85 t
            dimensions of the machine ca. 1,25 x 1.5 x 2,3 m
            Description :
            New Model Industrial Drilling and Milling Machine with Manual Transmission and
            High Speed Range. The prism guide in the Z-axis ensures a high degree of
            precision even in the most difficult milling jobs.

            Domestic equipments:
            • automatic feed in X-axis
            • 3-axis digital display
            • motorized Z-axis
            • Feed in quill
            • Left-right-run high
            • tapping attachment
            • Gear head swiveling
            • Coolant system


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM BF 30 DRO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76014 · Drilling and Milling M/C

          HBM - BF 30 DRO - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 198 mm︱bore stroke 75 mm︱ 16 mm︱spindle taper MK3 ︱spindle turning speed range 95 - 2840 U/min︱ 320 mm︱ 190 mm︱table surface area 700 x 190 mm︱connected load frequency 400 V︱max. distance between table and spindle-nose 55 - 405 mm︱total power requirement 1,1 kW︱weight of the machine ca. 180 Kg︱dimensions of the machine ca. 0,75 x 1,05 x 1,3 m︱
          Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!
            bore capacity in steel (diameter. 30 mm
            throat 198 mm
            bore stroke 75 mm
            16 mm
            spindle taper MK3
            spindle turning speed range 95 - 2840 U/min
            320 mm
            190 mm
            table surface area 700 x 190 mm
            connected load frequency 400 V
            max. distance between table and . 55 - 405 mm
            total power requirement 1,1 kW
            weight of the machine ca. 180 Kg
            dimensions of the machine ca. 0,75 x 1,05 x 1,3 m
            Description :
            Drilling and milling machine with
            - variable spindle speed
            - Digital depth display
            - Left / right switch
            - Cross support
            - swiveling spindle head
            - Feeds via hand crank
            - Tool case with content
            but without digital display !!


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C KAMI FKM 350 PD / SK40


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76004 · Drilling and Milling M/C

          KAMI - FKM 350 PD / SK40 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 290 mm︱bore stroke 130 mm︱spindle taper SK 40 ︱spindle turning speed range 70 - 3200 U/min︱ 520 mm︱ 230 mm︱table surface area 730 x 210 mm︱connected load frequency 400 V︱total power requirement 1,1/1,5 kW︱weight of the machine ca. 0,32 t︱dimensions of the machine ca. 1,1 x 0,9 x 1,15 m︱
          domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.
            bore capacity in steel (diameter. 40 mm
            throat 290 mm
            bore stroke 130 mm
            spindle taper SK 40
            spindle turning speed range 70 - 3200 U/min
            520 mm
            230 mm
            table surface area 730 x 210 mm
            connected load frequency 400 V
            total power requirement 1,1/1,5 kW
            weight of the machine ca. 0,32 t
            dimensions of the machine ca. 1,1 x 0,9 x 1,15 m
            Description :
            domestic equipments
            • Digital depth gauge
            • Adjustable guides with wedges
            • Large 12-speed range from 75 to 3200 rpm
            • Smooth running due to hardened and ground gears running in an oil bath •
            • Right-left rotation
            • Prismatic guides in all axes
            • Gear head can be swiveled 90 °
            • Chip protection with safety circuit

            Machine base optional.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM BF 60


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76009 · Drilling and Milling M/C

          HBM - BF 60 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 35 mm︱throat 230 mm︱bore stroke 125 mm︱spindle taper ISO 40 ︱spindle turning speed range 115 - 1750 U/min︱ 560 mm︱ 175 mm︱table surface area 1000 x 240 mm︱max. distance between table and spindle-nose 375 mm︱connected load frequency 400 V︱total power requirement 0,85/1,5 kW︱weight of the machine ca. 0,95 t︱dimensions of the machine ca. 1,3 x 1,2 x 2,1 m︱
          Domestic equipments: automatic feed and handwheel. Drill chuck with MK4 holder Digital depth display Left / right switch. Emergency stop switch Pivot head swiveling Spindle protection. Small toolbox Machine base and X-axis feed optional.
            bore capacity in steel (diameter. 35 mm
            throat 230 mm
            bore stroke 125 mm
            spindle taper ISO 40
            spindle turning speed range 115 - 1750 U/min
            560 mm
            175 mm
            table surface area 1000 x 240 mm
            max. distance between table and . 375 mm
            connected load frequency 400 V
            total power requirement 0,85/1,5 kW
            weight of the machine ca. 0,95 t
            dimensions of the machine ca. 1,3 x 1,2 x 2,1 m
            Description :
            Domestic equipments:
            automatic feed and handwheel.
            Drill chuck with MK4 holder
            Digital depth display
            Left / right switch.
            Emergency stop switch
            Pivot head swiveling
            Spindle protection.
            Small toolbox

            Machine base and X-axis feed optional.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM BF 30


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76015 · Drilling and Milling M/C

          HBM - BF 30 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 200 mm︱bore stroke 70 mm︱ 16 mm︱spindle taper MK3 ︱spindle turning speed range 50 - 3000 U/min︱ 220 mm︱ 425 mm︱table surface area 700 x 210 mm︱connected load frequency V︱max. distance between table and spindle-nose 470 mm︱total power requirement 1,5 kW︱weight of the machine ca. 230 Kg︱dimensions of the machine ca. 0,75 x 1,05 x 1,2 m︱
          Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content
            bore capacity in steel (diameter. 32 mm
            throat 200 mm
            bore stroke 70 mm
            16 mm
            spindle taper MK3
            spindle turning speed range 50 - 3000 U/min
            220 mm
            425 mm
            table surface area 700 x 210 mm
            max. distance between table and . 470 mm
            total power requirement 1,5 kW
            weight of the machine ca. 230 Kg
            dimensions of the machine ca. 0,75 x 1,05 x 1,2 m
            Description :
            Drilling and milling machine with
            - variable spindle speed
            - Digital depth display
            - Left / right switch
            - Cross support
            - swiveling spindle head
            - Feeds via hand crank
            - Tool case with content



        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM BF 16


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76013 · Drilling and Milling M/C

          HBM - BF 16 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 16 mm︱throat 170 mm︱bore stroke 50 mm︱ 16 mm︱spindle taper MK2 ︱spindle turning speed range 50 - 2250 U/min︱ 320 mm︱ 145 mm︱table surface area 500 x 140 mm︱connected load frequency 230 V︱total power requirement 0,5 kW︱weight of the machine ca. 90 Kg︱dimensions of the machine ca. 0,5 x 0,45 x 0,84 m︱
          Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!
            bore capacity in steel (diameter. 16 mm
            throat 170 mm
            bore stroke 50 mm
            16 mm
            spindle taper MK2
            spindle turning speed range 50 - 2250 U/min
            320 mm
            145 mm
            table surface area 500 x 140 mm
            connected load frequency 230 V
            total power requirement 0,5 kW
            weight of the machine ca. 90 Kg
            dimensions of the machine ca. 0,5 x 0,45 x 0,84 m
            Description :
            Drilling and milling machine with
            - variable spindle speed
            - Digital depth display
            - Left / right switch
            - Cross support
            - swiveling spindle head
            - Feeds via hand crank
            - Tool case with content
            but without digital display !!


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C UWM BF20 Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76019 · Drilling and Milling M/C

          UWM - BF20 Vario - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 16 mm︱throat 185 mm︱bore stroke 50 mm︱ 20 mm︱spindle taper MK 2 ︱spindle diameter mm︱spindle turning speed range 100-1500 / 200-3000 U/min︱ 175 mm︱ 280 mm︱table surface area 500 x 180 mm︱connected load frequency 230 V︱total power requirement 0,85 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 0,86 x 0,6 x 0,9 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 16 mm
            throat 185 mm
            bore stroke 50 mm
            20 mm
            spindle taper MK 2
            spindle turning speed range 100-1500 / 200-3000 U/min
            175 mm
            280 mm
            table surface area 500 x 180 mm
            connected load frequency 230 V
            total power requirement 0,85 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 0,86 x 0,6 x 0,9 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM BF 45 Profi DRO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76030 · Drilling and Milling M/C

          HBM - BF 45 Profi DRO - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 45 mm︱quill stroke 125 mm︱ 560 mm︱ 230 mm︱table surface area 800 x 240 mm︱spindle turning speed range 75 - 3200 U/min︱max. milling cutter diameter 80 mm︱spindle taper ISO 30 ︱max. distance between table and spindle-nose 460 mm︱throat 230 mm︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 580 Kg︱dimensions of the machine ca. 1,2 x 1,0 x 2,1 m︱
          Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box.
            bore capacity in steel (diameter. 45 mm
            quill stroke 125 mm
            560 mm
            230 mm
            table surface area 800 x 240 mm
            spindle turning speed range 75 - 3200 U/min
            max. milling cutter diameter 80 mm
            spindle taper ISO 30
            max. distance between table and . 460 mm
            throat 230 mm
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 580 Kg
            dimensions of the machine ca. 1,2 x 1,0 x 2,1 m
            Description :
            Equipment:
            All axes with 3-digital display.
            Quill travel has separate digit display.
            Automatic feed in X-axis and quill.
            Motorized Z-axis.
            tapping device.
            coolant system.
            machine base.
            Collet set, SK tool holder.
            Further machine accessories in box.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM BF 25 DRO big


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76018 · Drilling and Milling M/C

          HBM - BF 25 DRO big - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 175 mm︱bore stroke 50 mm︱ 16 mm︱spindle taper ISO 30 ︱spindle turning speed range 50 - 3000 U/min︱ 380 mm︱ 175 mm︱table surface area 700 x 180 mm︱connected load frequency 230 V︱max. distance between table and spindle-nose max. 320 mm︱total power requirement 0,75 kW︱weight of the machine ca. 150 Kg︱dimensions of the machine ca. 670 x 550 x 910 m︱
          Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools
            bore capacity in steel (diameter. 25 mm
            throat 175 mm
            bore stroke 50 mm
            16 mm
            spindle taper ISO 30
            spindle turning speed range 50 - 3000 U/min
            380 mm
            175 mm
            table surface area 700 x 180 mm
            connected load frequency 230 V
            max. distance between table and . max. 320 mm
            total power requirement 0,75 kW
            weight of the machine ca. 150 Kg
            dimensions of the machine ca. 670 x 550 x 910 m
            Description :
            Drilling and milling machine with large table
            Digital display SINO 3-axis.
            Digital display quill stroke.
            2 speed levels.
            Left/Right switch
            Pan head left/right 90°
            spindle protection.
            incl. tool box with various tools


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •