,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Deephole Boring Machine

          Machinelist: Deephole Boring Machine


          Deephole Boring Machine

          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine TIBO tibo. E 40-1-1000


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1517 · Deephole Boring Machine

          TIBO - tibo. E 40-1-1000 - - 2018 -

          Technical details
          number of spindles 1 ︱Solid drill diameter 5 - 40 mm︱bore depth 1.000 mm︱spindle motor 17 kW︱number of spindle speeds 200 - 6.000 U/min︱feed 10 - 500 mm/min︱rapid traverse 3.000 mm / min︱Dimensions (L x W x H) 5.100 x 2.000 x 2.000 mm︱weight of the machine 6.200 kg︱
          Deep hole drilling machine | TIBO - tibo. E 40-1-1000 The machine is in a very well-maintained condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: tibo E 40 1 1000 | tibo E40
            number of spindles 1
            Solid drill diameter 5 - 40 mm
            bore depth 1.000 mm
            spindle motor 17 kW
            number of spindle speeds 200 - 6.000 U/min
            feed 10 - 500 mm/min
            rapid traverse 3.000 mm / min
            Dimensions (L x W x H) 5.100 x 2.000 x 2.000 mm
            weight of the machine 6.200 kg
            Description :
            Deep hole drilling machine | TIBO - tibo. E 40-1-1000


            The machine is in a very well-maintained condition.

            For additional equipment information please refer
            to the original order confirmation which is included
            in the offer of this machine.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: tibo E 40 1 1000 | tibo E40


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine KARATS L-58BN (DH 30)


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18790 · Deephole Boring Machine

          KARATS - L-58BN (DH 30) - - 2016 - FANUC 31i-B

          Technical details
          core drilling diameter max. 56 - 650 mm︱bore depth 24000 mm︱swing diameter 5800 mm︱max. workpiece diameter 3400 mm︱workpiece length - max. 24000 mm︱workpiece weight max. 380 t︱speeds 160 U/min︱faceplate diameter 2500 mm︱control FANUC 31i-B ︱bore head horizontal movement 25870 mm︱cutting speed 0,1 - 1000 mm/min︱rapid feed 4000 mm/min︱main drive 500 kW︱total power requirement 300 kVA︱weight of the machine ca. 350 t︱
          Deep Hole Drill & Honing Machine (installed 2017) - CNC Control Fanuc 31i-B - BTA Boring - Boring Head (A-Axis) - Pressure table (Z-Axis) - Chip Conveyor
            core drilling diameter max. 56 - 650 mm
            bore depth 24000 mm
            swing diameter 5800 mm
            max. workpiece diameter 3400 mm
            workpiece length - max. 24000 mm
            workpiece weight max. 380 t
            speeds 160 U/min
            faceplate diameter 2500 mm
            control FANUC 31i-B
            bore head horizontal movement 25870 mm
            cutting speed 0,1 - 1000 mm/min
            rapid feed 4000 mm/min
            main drive 500 kW
            total power requirement 300 kVA
            weight of the machine ca. 350 t
            Description :
            Deep Hole Drill & Honing Machine (installed 2017)
            - CNC Control Fanuc 31i-B
            - BTA Boring
            - Boring Head (A-Axis)
            - Pressure table (Z-Axis)
            - Chip Conveyor


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine TIBO E10-2-375


          • Horn Werkzeugmaschinen
          • Görlitzer Straße 65
          • 78052 Villingen-Schwenningen
          • Deutschland

          • +49 7721 993 7994
          • horn@horn-wzm.de
            www.horn-wzm.de
          #2082-230940 · Deephole Boring Machine

          TIBO - E10-2-375 - - 2016 - Siemens

          Technical details
          Solid drill diameter 0︱bore depth mm︱number of spindles 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Deep hole drilling machines "Made in Germany" TIBO type E10-2 with KBH brand automation Modular and flexible deep hole drilling ELB process single-lip deep hole drilling machine Year of construction: 2016 Technical data: 2 spindles Full drilling capacity 2 - 10 mm in steel Drilling depth max.: 375 mm (when using 2 steady rests) Spindle drive: 3.7 kW Siemens SINAMICS 1PH8 Spindle speed: max. 12,000 rpm, infinitely variable Feed: 10 - 500 mm/min, infinitely variable Z-axis Dimensions: 3,800 x 2,000 x 2,000 Machine weight: approx. 4,000 kg Regulations and standards: VDE 0100/0113 Rated power: 22 kW Rated current: 45 A Recommended fuse protection: 63 A (slow-blow) Recommended cross-section: 16 mm² Nominal voltage: 400 V 3 AC à 50 Hz Control voltage 1: 230 V AC à 50 Hz Control voltage 2: 24 V DC Automation: The automation solution for workpieces and/or tools is integrated into our control concept and therefore offers simple and easy-to-understand operation. Loading and unloading systems: - Conveyor belt An ELB changeover kit for fast changeover is available as an option Deep hole drilling is used in almost all areas of the manufacturing industry - on a small scale, such as in medical or aerospace technology, but also in the oil and gas industry or in shipbuilding, where huge drilling diameters and drilling depths of up to 12,000 mm and more are used. These different areas of application place special demands on the machine used. Anyone who chooses a deep hole drilling machine from Tibo can rely on a well thought-out application concept, absolute technical precision and high-quality components. The machine was used to produce screws and nails for medical technology. Due to its use in the medical technology sector, the machine was regularly serviced and maintained to meet the strict standards. Changes and errors in the technical data and information as well as prior sale reserved!
            Description :
            Deep hole drilling machines "Made in Germany"
            TIBO type E10-2 with KBH brand automation
            Modular and flexible deep hole drilling
            ELB process single-lip deep hole drilling machine
            Year of construction: 2016
            Technical data:
            2 spindles
            Full drilling capacity 2 - 10 mm in steel
            Drilling depth max.: 375 mm (when using 2 steady rests)
            Spindle drive: 3.7 kW
            Siemens SINAMICS 1PH8
            Spindle speed: max. 12,000 rpm, infinitely variable
            Feed: 10 - 500 mm/min, infinitely variable Z-axis
            Dimensions: 3,800 x 2,000 x 2,000
            Machine weight: approx. 4,000 kg

            Regulations and standards: VDE 0100/0113
            Rated power: 22 kW
            Rated current: 45 A
            Recommended fuse protection: 63 A (slow-blow)
            Recommended cross-section: 16 mm²
            Nominal voltage: 400 V 3 AC à 50 Hz
            Control voltage 1: 230 V AC à 50 Hz
            Control voltage 2: 24 V DC
            Automation:
            The automation solution for workpieces and/or tools is integrated into our control concept and therefore offers simple and easy-to-understand operation. Loading and unloading systems:
            - Conveyor belt

            An ELB changeover kit for fast changeover is available as an option

            Deep hole drilling is used in almost all areas of the manufacturing industry - on a small scale, such as in medical or aerospace technology, but also in the oil and gas industry or in shipbuilding, where huge drilling diameters and drilling depths of up to 12,000 mm and more are used. These different areas of application place special demands on the machine used. Anyone who chooses a deep hole drilling machine from Tibo can rely on a well thought-out application concept, absolute technical precision and high-quality components.

            The machine was used to produce screws and nails for medical technology. Due to its use in the medical technology sector, the machine was regularly serviced and maintained to meet the strict standards.

            Changes and errors in the technical data and information as well as prior sale reserved!


        • Horn Werkzeugmaschinen
        • Görlitzer Straße 65
        • 78052 Villingen-Schwenningen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine TOSHIBA-SHIBAURA


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20125 · Deephole Boring Machine

          TOSHIBA-SHIBAURA - - - 2010 reb - Fanuc

          Technical details
          core boring 70-560 mm︱bore depth 20000 mm︱drilling diameter 70-500 mm︱core boring capacity in St 60 - reboring special: 560-1000 mm︱workpiece diameter 3200 mm︱workpiece weight 200 t︱faceplate diameter 2900 mm︱speed of boring spindle: 100 - 500 U/min︱feed range 3 - 2000 mm/min︱boring spindle drive 55 kW︱spindle head drive 150 kW︱workpiece turning speeds 230 U/min︱control Fanuc ︱total power requirement - kW︱weight of the machine ca. - t︱
          2010 Retrofitted equipped with: - Fanuc Control - 4-Jaw Chuck - Oil Pressure Head - Boring Head - Drill Head - 2-Point Rollers Steady Rest (4) - 3 Point Steady Rest (2) - Bar Rest (2) - Coolant & Coolant Piping - Chip Conveyor - Honing Oil Tank & Honing Tool Bars
            core boring 70-560 mm
            bore depth 20000 mm
            drilling diameter 70-500 mm
            core boring capacity in St 60 - . special: 560-1000 mm
            workpiece diameter 3200 mm
            workpiece weight 200 t
            faceplate diameter 2900 mm
            speed of boring spindle: 100 - 500 U/min
            feed range 3 - 2000 mm/min
            boring spindle drive 55 kW
            spindle head drive 150 kW
            workpiece turning speeds 230 U/min
            control Fanuc
            total power requirement - kW
            weight of the machine ca. - t
            Description :
            2010 Retrofitted
            equipped with:
            - Fanuc Control
            - 4-Jaw Chuck
            - Oil Pressure Head
            - Boring Head
            - Drill Head
            - 2-Point Rollers Steady Rest (4)
            - 3 Point Steady Rest (2)
            - Bar Rest (2)
            - Coolant & Coolant Piping
            - Chip Conveyor
            - Honing Oil Tank & Honing Tool Bars


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine IXION AUERBACH IA 3 - TLF 1004


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19435 · Deephole Boring Machine

          IXION AUERBACH - IA 3 - TLF 1004 - - 2006 - Siemens 840D

          Technical details
          core drilling diameter max. 8 - 40 mm︱bore depth 1300 mm︱swing diameter . mm︱table load 7 / 10 t︱table surface area 1500 x 1000 mm︱travel -x axis 2000 mm︱travel -y axis 800 mm︱travel -z axis 2000 mm︱travel -w axis 1700 mm︱drilling capacity diameter max. 40 mm︱turning speed range - drilling 60 - 6000 U/min︱milling drive 7/11 kW︱spindle taper ISO 40 ︱Control Siemens 840D ︱A-Axis -25 / +15 °︱B-axis (table) 360 °︱total power requirement kW︱weight of the machine ca. t︱
          The Auerbach IXION IA3 TLF is for deep drilling of cubic and rotationally symmetrical workpieces. Scope of processing: deep drilling, milling of outer contours, pockets, Grooving, centering, drilling, reaming, tapping, double inclined drilling. equipped with: - Siemens Sinumerik 840 D with electronic handwheel, - chip conveyor - Coolant through Spindle - Tool Control - Steady -
            core drilling diameter max. 8 - 40 mm
            bore depth 1300 mm
            swing diameter . mm
            table load 7 / 10 t
            table surface area 1500 x 1000 mm
            travel -x axis 2000 mm
            travel -y axis 800 mm
            travel -z axis 2000 mm
            travel -w axis 1700 mm
            drilling capacity diameter max. 40 mm
            turning speed range - drilling 60 - 6000 U/min
            milling drive 7/11 kW
            spindle taper ISO 40
            Control Siemens 840D
            A-Axis -25 / +15 °
            B-axis (table) 360 °
            Description :
            The Auerbach IXION IA3 TLF is for deep drilling of cubic
            and rotationally symmetrical workpieces.

            Scope of processing: deep drilling, milling of outer contours, pockets,
            Grooving, centering, drilling, reaming, tapping, double inclined drilling.

            equipped with:
            - Siemens Sinumerik 840 D with electronic handwheel,
            - chip conveyor
            - Coolant through Spindle
            - Tool Control
            - Steady
            -


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine FRORIEP 961


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-041544 · Deephole Boring Machine

          FRORIEP - 961 - - 2006 -

          Technical details
          bore depth 8850 mm︱swing diameter 1000/900 mm︱total power requirement 129 kW︱weight of the machine ca. 47 t︱dimensions of the machine ca. m︱core drilling diameter max. mm︱
          CNC control Sinumerik 840D diameter of the face plate 1200mm steady rest chip conveyor Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 1000 mm Umlaufdurchmesser in Rollenbock / rotary diameter at steady rest 900 mm Max. Bohrtiefe / max. drilling depth 8850 mm Spanndurchmesser Planscheibe / clamping diameter at face plate 900 mm Drehzahlbereich / spindle speed 1-300 U/min Vorschubbereich / infeed 0,5-4500 mm/min Antriebsleistung / drive capacity 129 kW Werkstückabmessungen: / workpiece measures Min. Aussendurchmesser / min. outer diameter 150 mm Max. Aussendurchmesser / max. outer diameter 900 mm Max. Werkstücklänge / max. workpiece lenght 8000 mm Maschinengewicht / weight of machine 47000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            bore depth 8850 mm
            swing diameter 1000/900 mm
            total power requirement 129 kW
            weight of the machine ca. 47 t
            Description :
            CNC control Sinumerik 840D
            diameter of the face plate 1200mm
            steady rest
            chip conveyor

            Technische Daten / technical details:
            Umlaufdurchmesser über Bett / rotary diameter over bed 1000 mm
            Umlaufdurchmesser in Rollenbock / rotary diameter at steady rest 900 mm
            Max. Bohrtiefe / max. drilling depth 8850 mm
            Spanndurchmesser Planscheibe / clamping diameter at face plate 900 mm
            Drehzahlbereich / spindle speed 1-300 U/min
            Vorschubbereich / infeed 0,5-4500 mm/min
            Antriebsleistung / drive capacity 129 kW
            Werkstückabmessungen: / workpiece measures
            Min. Aussendurchmesser / min. outer diameter 150 mm
            Max. Aussendurchmesser / max. outer diameter 900 mm
            Max. Werkstücklänge / max. workpiece lenght 8000 mm
            Maschinengewicht / weight of machine 47000 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.




        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine TBT BWP 250


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-410847 · Deephole Boring Machine

          TBT - BWP 250 - - 1996 -

          Technical details
          core drilling diameter max. 25 mm︱bore depth 1000 mm︱swing diameter mm︱total power requirement 25 kW︱weight of the machine ca. 12,5 t︱dimensions of the machine ca. m︱
          T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 ___________________________________________________________________________________ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.
            core drilling diameter max. 25 mm
            bore depth 1000 mm
            total power requirement 25 kW
            weight of the machine ca. 12,5 t
            Description :
            T B T (Germany)
            CNC-Controlled Horizontal Deep Hole Drilling " Centre "
            Model BWP 250
            Year 1996, but reconditioned mechanically and electrically in 2006
            ___________________________________________________________________________________

            Working range: X Axis, machine column cross 2,000 mm
            Z Axis, drilling slide horizontal 1,200 mm
            Drilling depth 1.000 mm
            Y Axis, drilling slide vertical 1,100 mm

            Table clamping area 1,200 x 2,000 mm

            Drilling capacity in solid material, approx. 4 - 25 mm
            Tool holder taper HSK 50
            Spindle speeds 1.260 - 15,000 rpm

            Feed rates / quickfeed, XYZ,
            infinitely variable 100 - 10,000/15.000 mm/min.
            Force rate of feed motors 27 Nm / 1.000 daN

            Spindle drive steplessly adjustable 7 kW
            Total electrical load, approx. 30 kW - 400 V - 50 Hz
            Weight, approx. 10,000 kg

            Accessories / Special Features:

            " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm.
            " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc.
            " High Frequency Spindle Make GAMFIOR with stepless speeds
            " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc.
            " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation.
            " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm,
            " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions
            " Built-in coolant device with chip conveyor and various filters.
            " 2 steady rests.
            " Completely covered working area with access at the front and at the side.

            Condition : Very good condition. This is a rare and valuable machine. Under Power
            Delivery : immediately ex our Stock
            Payment : Net, after conclusion of contract.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine TBT M 320-2-1200


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-776778 · Deephole Boring Machine

          TBT - M 320-2-1200 - - 1993 -

          Technical details
          core drilling diameter max. 25 mm︱bore depth 1200 mm︱swing diameter 160 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            core drilling diameter max. 25 mm
            bore depth 1200 mm
            swing diameter 160 mm


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine TBT HS 1-350


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-469994 · Deephole Boring Machine

          TBT - HS 1-350 - - 1990 -

          Technical details
          core drilling diameter max. 6 mm︱bore depth 350 mm︱swing diameter mm︱total power requirement 15 kW︱weight of the machine ca. 3500 kg︱dimensions of the machine ca. 5000 x 1200 x 2200 mm︱
            core drilling diameter max. 6 mm
            bore depth 350 mm
            total power requirement 15 kW
            weight of the machine ca. 3500 kg
            dimensions of the machine ca. 5000 x 1200 x 2200 mm


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine IXION TL 500 SVA


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03722 · Deephole Boring Machine

          IXION - TL 500 SVA - - 1985 - CNC Bosch Alpha

          Technical details
          core drilling diameter max. 1,5 - 18 mm︱bore depth 600 mm︱swing diameter mm︱fixed clamping table 700 x 1.350 mm︱clamping surface of round table 1.000 x 500 mm︱longitudinal feed of the table 600 mm︱Table shift in drilling direction 400 mm︱table rotating 180 °︱vertical adjustment of drilling slide 250 mm︱drill unit swivable +/- 15 °︱spindle cone MT 3 ︱no. of turning speeds 8 ︱turning speed range 240 - 2.400 U/min︱Control CNC Bosch Alpha ︱motor power 1,0 / 1,6 kW︱total power requirement 10 kVA︱weight of the machine ca. 1,35 t︱dimensions of the machine ca. 2,0 x 1,5 x 1,8 m︱
          GUR ERHALTEN MASCHINE MIT 3 AXIS DRO
            core drilling diameter max. 1,5 - 18 mm
            bore depth 600 mm
            fixed clamping table 700 x 1.350 mm
            clamping surface of round table 1.000 x 500 mm
            longitudinal feed of the table 600 mm
            Table shift in drilling directio. 400 mm
            table rotating 180 °
            vertical adjustment of drilling . 250 mm
            drill unit swivable +/- 15 °
            spindle cone MT 3
            no. of turning speeds 8
            turning speed range 240 - 2.400 U/min
            Control CNC Bosch Alpha
            motor power 1,0 / 1,6 kW
            total power requirement 10 kVA
            weight of the machine ca. 1,35 t
            dimensions of the machine ca. 2,0 x 1,5 x 1,8 m
            Description :
            GUR ERHALTEN MASCHINE
            MIT 3 AXIS DRO


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine GILDEMEISTER & KNOLL 2 M 01-2-320


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-402623 · Deephole Boring Machine

          GILDEMEISTER & KNOLL - 2 M 01-2-320 - - 1985 -

          Technical details
          core drilling diameter max. 18 mm︱bore depth 320 mm︱swing diameter mm︱total power requirement 33 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. m︱
            core drilling diameter max. 18 mm
            bore depth 320 mm
            total power requirement 33 kW
            weight of the machine ca. 6 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine HEGENSCHEIDT


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-11323E · Deephole Boring Machine

          HEGENSCHEIDT - - - 1980 -

          Technical details
          bore depth 2000 mm︱table load 2 t︱turning speeds 125-1180 U/min︱Boring power 380 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            bore depth 2000 mm
            table load 2 t
            turning speeds 125-1180 U/min
            Boring power 380 mm


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine HEGENSCHEIDT


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-V0049 · Deephole Boring Machine

          HEGENSCHEIDT - - - 1980 -

          Technical details
          bore depth 2000 mm︱table load 2 t︱turning speeds 125-1180 U/min︱Boring power 380 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            bore depth 2000 mm
            table load 2 t
            turning speeds 125-1180 U/min
            Boring power 380 mm


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine HEIDENREICH & HARBECK B 2 P 2


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-26547 · Deephole Boring Machine

          HEIDENREICH & HARBECK - B 2 P 2 - - 1973 -

          Technical details
          Solid drill diameter 0︱bore depth mm︱number of spindles 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Height of bed rail until mid-drilling: 315 mm
          Gr. On drill bit Ø: 178,3 mm
          Bed length: 9400 mm
          Drilling depth approx.: 3150 mm
          Continuous feed range: 70-1750 mm / min
          Rapid traverse speed: 4.25 m / min
          Spindle box, bore: 62 mm
          M7m3il
          Main spindle RPM: 180-1000 rpm
          Main spindle drive: 380 V, 15 kW
          Machine weight: 6.6 t
            Description :
            Height of bed rail until mid-drilling: 315 mm

            Gr. On drill bit Ø: 178,3 mm

            Bed length: 9400 mm

            Drilling depth approx.: 3150 mm

            Continuous feed range: 70-1750 mm / min

            Rapid traverse speed: 4.25 m / min

            Spindle box, bore: 62 mm

            M7m3il

            Main spindle RPM: 180-1000 rpm

            Main spindle drive: 380 V, 15 kW

            Machine weight: 6.6 t


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine BOEHRINGER B 630 - 4000


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19178 · Deephole Boring Machine

          BOEHRINGER - B 630 - 4000 - - 1971/2007 - Siemens TP 177A

          Technical details
          core drilling diameter max. 250 mm︱bore depth 4000 mm︱swing diameter 650 mm︱core boring 250 mm︱Solid drill diameter 15 - 130 mm︱center height over square guideway 315 mm︱center height over work table 500 mm︱bed width 450 mm︱bore spindle turning speed range 35,5 - 1800 U/min︱max. torque on the spindle 4500 Nm︱bore spindle drive 55 kW︱main spindle bore 128 mm︱spindle diameter in front bearing 170 mm︱spindle head DIN 55022 Gr. 11 ︱rapid traverse of boring slide 3000 mm/min︱feed power 40000 / 28000 N︱feed 10 - 2000 m/min︱ über AC-Servomotor ︱Control Siemens TP 177A ︱electrics - voltage/frequency 3 AC, 400 / 50 V/Hz︱
          2007 complete rebuilt/retrofitted, - new PLC control Siemens TP 177A mit PLC Siemens S7-200 - Touch Screen - Siemens AC Drives - rotary tools and BTA System - paperbandfilter - chip conveyor and centrifuge - Rotary table 1250mm x 1750mm with 0.1 degree "B" Axis - Two 400 mm capacity hydraulic vices - Back bed section with headstock and 3 jaw chuck to allow boring up to max. 4000mm - 2 Sealing heads
            core drilling diameter max. 250 mm
            bore depth 4000 mm
            swing diameter 650 mm
            core boring 250 mm
            Solid drill diameter 15 - 130 mm
            center height over square guidew. 315 mm
            center height over work table 500 mm
            bed width 450 mm
            bore spindle turning speed range 35,5 - 1800 U/min
            max. torque on the spindle 4500 Nm
            bore spindle drive 55 kW
            main spindle bore 128 mm
            spindle diameter in front bearin. 170 mm
            spindle head DIN 55022 Gr. 11
            rapid traverse of boring slide 3000 mm/min
            feed power 40000 / 28000 N
            feed 10 - 2000 m/min
            über AC-Servomotor
            Control Siemens TP 177A
            electrics - voltage/frequency 3 AC, 400 / 50 V/Hz
            Description :
            2007 complete rebuilt/retrofitted,
            - new PLC control Siemens TP 177A mit PLC Siemens S7-200
            - Touch Screen
            - Siemens AC Drives
            - rotary tools and BTA System
            - paperbandfilter
            - chip conveyor and centrifuge
            - Rotary table 1250mm x 1750mm with 0.1 degree "B" Axis
            - Two 400 mm capacity hydraulic vices
            - Back bed section with headstock and 3 jaw chuck to allow boring up to max.
            4000mm
            - 2 Sealing heads


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine WOHLENBERG B 10 S


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02482 · Deephole Boring Machine

          WOHLENBERG - B 10 S - - 1971 -

          Technical details
          core drilling diameter max. 50-355 mm︱bore depth 4000 mm︱swing diameter 1000 mm︱centre height 500 mm︱full boring 18-100 mm︱main spindle bore 163 mm︱turning speeds 56-710 U/min︱workpiece weight 6,3/10 t︱Tailstock 70-600 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Drill pipes, guide block, drill head, rolling steady rest, support bearing drill heads, jaws 21- 240 mm, Holder, tools, shelves, cupboards
            core drilling diameter max. 50-355 mm
            bore depth 4000 mm
            swing diameter 1000 mm
            centre height 500 mm
            full boring 18-100 mm
            main spindle bore 163 mm
            turning speeds 56-710 U/min
            workpiece weight 6,3/10 t
            Tailstock 70-600 mm
            Description :
            Drill pipes, guide block, drill head, rolling steady rest, support bearing
            drill heads, jaws 21- 240 mm, Holder, tools, shelves, cupboards


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine WOHLENBERG B 10 S


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12405EH · Deephole Boring Machine

          WOHLENBERG - B 10 S - - 1971 -

          Technical details
          core drilling diameter max. 50-355 mm︱bore depth 4000 mm︱swing diameter 1000 mm︱centre height 500 mm︱full boring 18-100 mm︱main spindle bore 163 mm︱turning speeds 56-710 U/min︱workpiece weight 6,3/10 t︱Tailstock 70-600 mm︱total power requirement 75 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Drill pipes, guide block, drill head, rolling steady rest, support bearing drill heads, jaws 21- 240 mm, Holder, tools, shelves, cupboards
            core drilling diameter max. 50-355 mm
            bore depth 4000 mm
            swing diameter 1000 mm
            centre height 500 mm
            full boring 18-100 mm
            main spindle bore 163 mm
            turning speeds 56-710 U/min
            workpiece weight 6,3/10 t
            Tailstock 70-600 mm
            total power requirement 75 kW
            Description :
            Drill pipes, guide block, drill head, rolling steady rest, support bearing
            drill heads, jaws 21- 240 mm, Holder, tools, shelves, cupboards


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine SIG B 30 /16


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-382093 · Deephole Boring Machine

          SIG - B 30 /16 - - 1965 -

          Technical details
          core drilling diameter max. 50 mm︱bore depth 2000 mm︱swing diameter mm︱drilling capacity diameter max. 110 mm︱total power requirement 30 kW︱weight of the machine ca. 10 t︱
          Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!
            core drilling diameter max. 50 mm
            bore depth 2000 mm
            drilling capacity diameter max. 110 mm
            total power requirement 30 kW
            weight of the machine ca. 10 t
            Description :
            Drilling Ø, approx. 2 - 50 mm
            Boring Ø, approx. 100 mm
            Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm
            Stroke of drilling slide, approx. 4,000 mm
            Distance between the two spindle heads 5,000 mm
            Height of centres above guideways 350 / 450 mm

            Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min
            Quick feed of drilling slide 2,500 mm/min
            Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm

            Workspindle drive 24 kW
            Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW
            Total electrical load, approx. 60 kW - 380 V - 50 Hz
            Total length of machine / guideways 7,500 / 5,000 mm
            Weight, approx. 10,000 kg

            Accessories / Special Features
            * Machine consists of the following elements:
            Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw
            spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with
            drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection
            of accessories and drilling tools with Ø up to 100 mm.
            * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA).
            * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l.
            * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return.
            * 2 closed 3-point steady rests.
            * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm.
            * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc.
            * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories.

            This is a very valuable machine because of all the accessories!


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine BEYER BTBH-50/100


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-11319E · Deephole Boring Machine

          BEYER - BTBH-50/100 - - -

          Technical details
          Boring power 70-550 mm︱bore depth 10000 mm︱table load 10 t︱turning speeds 35-92 + 92-595 U/min︱total power requirement 37 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Chip conveyor Extraction system
            Boring power 70-550 mm
            bore depth 10000 mm
            table load 10 t
            turning speeds 35-92 + 92-595 U/min
            total power requirement 37 kW
            Description :
            Chip conveyor
            Extraction system



        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine BEYER BTBH 28


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-11321E · Deephole Boring Machine

          BEYER - BTBH 28 - - -

          Technical details
          core drilling diameter max. 650 mm︱bore depth 6000 mm︱table load 6 t︱turning speeds 50-600 U/min︱total power requirement 30 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Extraction system
            core drilling diameter max. 650 mm
            bore depth 6000 mm
            table load 6 t
            turning speeds 50-600 U/min
            total power requirement 30 kW
            Description :
            Extraction system


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine BEYER BTBH 28


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-V0050 · Deephole Boring Machine

          BEYER - BTBH 28 - - -

          Technical details
          core drilling diameter max. 50-600 mm︱bore depth 6000 mm︱table load 6 t︱turning speeds 50-600 U/min︱clamping diameter max. 650 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            core drilling diameter max. 50-600 mm
            bore depth 6000 mm
            table load 6 t
            turning speeds 50-600 U/min
            clamping diameter max. 650 mm


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine BEYER BTBH-50/100


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-V0048 · Deephole Boring Machine

          BEYER - BTBH-50/100 - - -

          Technical details
          Boring power 70-550 mm︱bore depth 10000 mm︱table load 10 t︱turning speeds 35-92 + 92-595 U/min︱transmission ratio 2 ︱clamping diameter max. 1000 mm︱workpiece weight 10000 kg︱chip conveyor ︱coolant ︱total power requirement 37 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            Boring power 70-550 mm
            bore depth 10000 mm
            table load 10 t
            turning speeds 35-92 + 92-595 U/min
            transmission ratio 2
            clamping diameter max. 1000 mm
            workpiece weight 10000 kg
            total power requirement 37 kW


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Deephole Boring Machine MEWAG IXION TL500


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-5009 · Deephole Boring Machine

          MEWAG IXION - TL500 - - -

          Technical details
          core drilling diameter max. 16 mm︱bore depth 485 mm︱swing diameter x mm︱table-size 590x350 mm︱spindle turning speed range 230-2300 U/min︱weight of the machine ca. 0.4 t︱
          Table with digital read out Misc accessories www.marcels-maschinen.ch
            core drilling diameter max. 16 mm
            bore depth 485 mm
            swing diameter x mm
            table-size 590x350 mm
            spindle turning speed range 230-2300 U/min
            weight of the machine ca. 0.4 t
            Description :
            Table with digital read out
            Misc accessories

            www.marcels-maschinen.ch


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact

          Radial Drilling Machine

          used Boring mills / Machining Centers / Drilling machines Radial Drilling Machine INVEMA FR 65 2000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6260 · Radial Drilling Machine

          INVEMA - FR 65 2000 - - unbekannt/unkown -

          Technical details
          bore capacity in steel (diameter) 65 mm︱arm length 400 - 2000 mm︱workpiece height max. -- mm︱spindle distance 1720 mm︱number of spindle speeds 30 - 1400 U/min︱stroke vertikal 910 mm︱total power requirement 7,5 kW︱weight of the machine ca. ca. 8 t︱dimensions of the machine ca. 1,4 x 3 x 3,8 m︱
            bore capacity in steel (diameter. 65 mm
            arm length 400 - 2000 mm
            workpiece height max. -- mm
            spindle distance 1720 mm
            number of spindle speeds 30 - 1400 U/min
            stroke vertikal 910 mm
            total power requirement 7,5 kW
            weight of the machine ca. ca. 8 t
            dimensions of the machine ca. 1,4 x 3 x 3,8 m


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •