,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Machining Center - Horizontal

          Machinelist: Machining Center - Horizontal


          Machining Center - Horizontal

          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MAKINO A61 NX


          • ADEM MASCHINEN GMBH
          • Karl-Benz-Straße 1
          • 40764 Langenfeld (Rheinland)
          • Deutschland

          • +49 (0) 2173- 287 77 07
            +49 (0) 2173- 287 77 05
          • adem-maschinen@t-online.de
            www.adem-maschinen.com
          #2000-380 · Machining Center - Horizontal

          MAKINO - A61 NX - - 2019 - Professional 6

          Technical details
          x-travel 730 mm︱y-travel 730 mm︱z-travel 800 mm︱Control Professional 660 St.︱total power requirement - kW︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱
            x-travel 730 mm
            y-travel 730 mm
            z-travel 800 mm
            Control Professional 6
            60 St.
            total power requirement - kW
            weight of the machine ca. - t
            dimensions of the machine ca. - m


        • ADEM MASCHINEN GMBH
        • Karl-Benz-Straße 1
        • 40764 Langenfeld (Rheinland)
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MAKINO A61 NX


          • ADEM MASCHINEN GMBH
          • Karl-Benz-Straße 1
          • 40764 Langenfeld (Rheinland)
          • Deutschland

          • +49 (0) 2173- 287 77 07
            +49 (0) 2173- 287 77 05
          • adem-maschinen@t-online.de
            www.adem-maschinen.com
          #2000-370 · Machining Center - Horizontal

          MAKINO - A61 NX - - 2019 - Professional 6

          Technical details
          x-travel 730 mm︱y-travel 730 mm︱z-travel 800 mm︱Control Professional 660 St.︱total power requirement - kW︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱
            x-travel 730 mm
            y-travel 730 mm
            z-travel 800 mm
            Control Professional 6
            60 St.
            total power requirement - kW
            weight of the machine ca. - t
            dimensions of the machine ca. - m


        • ADEM MASCHINEN GMBH
        • Karl-Benz-Straße 1
        • 40764 Langenfeld (Rheinland)
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal Krauseco-Mauser PS MC


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03583 · Machining Center - Horizontal

          Krauseco-Mauser - PS MC - - 2017 - Siemens

          Technical details
          x-travel 700 mm︱y-travel 700 mm︱z-travel 700 mm︱Control Siemens ︱type 840Dsl ︱Number of spindles 2 St.︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Doppelwendespanner Maschinennummer 0552.80.00 About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us.
            x-travel 700 mm
            y-travel 700 mm
            z-travel 700 mm
            Control Siemens
            type 840Dsl
            Number of spindles 2 St.
            Description :
            Doppelwendespanner

            Maschinennummer 0552.80.00

            About usmore than 400 machines in the warehouse over 12000 m² storage area,
            crane capacity 70 tmore than 1000 items accessories for your workshopYou want
            to sell machines production lines or your company, then talk to us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal STARRAG-HECKERT HEC 400 Focus


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2317 · Machining Center - Horizontal

          STARRAG-HECKERT - HEC 400 Focus - - 2016 - Siemens 840 D sl

          Technical details
          x-travel 650 mm︱y-travel 650 mm︱z-travel 680 mm︱Control Siemens 840 D sl ︱size of pallet 500 x 400 mm︱table load 500 (600) kg︱tool taper HSK-A63 ︱spindle turning speed range 50 - 10000 U/min︱rapid travel x/y/z 65/65/65 m/min︱no. of tools in the magazine 80 Stück︱Tool diameter 160 mm︱tool length - max. 350 (400) mm︱spindle motor (S6) 32,4 kW︱weight of the machine ca. 12,8 t︱dimensions of the machine ca. 6,2 x 3,9 x 3,95 m︱
          * CNC-control SIEMENS Sinumerik 840 D sl * 80-pos. ATC * 2-pos. pallet changer * NC-rotary table * Increased spindle torque up to 259 Nm * Coolant equipment with paper band filter * Coolant through spindle 80 bar * Swarf conveyor Max. workpiece diameter: 750 mm
            x-travel 650 mm
            y-travel 650 mm
            z-travel 680 mm
            Control Siemens 840 D sl
            size of pallet 500 x 400 mm
            table load 500 (600) kg
            tool taper HSK-A63
            spindle turning speed range 50 - 10000 U/min
            rapid travel x/y/z 65/65/65 m/min
            no. of tools in the magazine 80 Stück
            Tool diameter 160 mm
            tool length - max. 350 (400) mm
            spindle motor (S6) 32,4 kW
            weight of the machine ca. 12,8 t
            dimensions of the machine ca. 6,2 x 3,9 x 3,95 m
            Description :
            * CNC-control SIEMENS Sinumerik 840 D sl
            * 80-pos. ATC
            * 2-pos. pallet changer
            * NC-rotary table
            * Increased spindle torque up to 259 Nm
            * Coolant equipment with paper band filter
            * Coolant through spindle 80 bar
            * Swarf conveyor

            Max. workpiece diameter: 750 mm



        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MAZAK GHT35


          • DEMO Company
          • Ottostr. 2
          • 59368 Werne
          • Deutschland

          • +49 2389 52990 80
            +49 2389 52990 86
          • info@logotech.de
            homepage-lite.logotech.de
          #8100-10001 · Machining Center - Horizontal

          MAZAK - GHT35 - - 2013 -

          Technical details
          x-travel 200 mm︱y-travel 200 mm︱z-travel 200 mm︱turning diameter over slide rest 456 mm︱total power requirement 2,3 kW︱weight of the machine ca. 1,5 t︱required space 2x4x3 m︱
            x-travel 200 mm
            y-travel 200 mm
            z-travel 200 mm
            turning diameter over slide rest 456 mm
            total power requirement 2,3 kW
            weight of the machine ca. 1,5 t
            required space 2x4x3 m


        • DEMO Company
        • Ottostr. 2
        • 59368 Werne
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal DOOSAN DAEWOO HM 1250


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19944 · Machining Center - Horizontal

          DOOSAN DAEWOO - HM 1250 - - 2013 - Fanuc 31i-MB

          Technical details
          x-travel 2100 mm︱y-travel 1500 mm︱z-travel 1500 mm︱Number of pallets 2 ︱size of pallet 1250 x 1250 mm︱dimension of workpiece 2000 x 1425 (H) mm︱feeds 0,1 - 12000 mm/min︱rapid traverse 24000 mm/min︱spindle motor 26/22 kW︱spindle turning speed range 10 - 6000 U/min︱Tool magazine positions 60 fach︱tool taper ISO 50 ︱control Fanuc 31i-MB ︱workpiece weight 3000 kg︱total power requirement 69 KVA︱total wight 31 t︱dimensions of the machine ca. 10,5 x 5,8 x 4,1 m︱
          Equipment : - CNC control FANUC 31i-MA 4-axis (X,Y,Z,B) - 2- pallets 1250 mm - internal spindle cooling, oil cooler - IKZ 20bar - tool changer 90-fold (BT 50) - chip conveyor - ball screw cooling - Glass scales Heidenhain - CE sign approx. 27000h Power On Hours, 12400h Cutting Time
            x-travel 2100 mm
            y-travel 1500 mm
            z-travel 1500 mm
            Number of pallets 2
            size of pallet 1250 x 1250 mm
            dimension of workpiece 2000 x 1425 (H) mm
            feeds 0,1 - 12000 mm/min
            rapid traverse 24000 mm/min
            spindle motor 26/22 kW
            spindle turning speed range 10 - 6000 U/min
            Tool magazine positions 60 fach
            tool taper ISO 50
            control Fanuc 31i-MB
            workpiece weight 3000 kg
            total power requirement 69 KVA
            total wight 31 t
            dimensions of the machine ca. 10,5 x 5,8 x 4,1 m
            Description :
            Equipment :
            - CNC control FANUC 31i-MA 4-axis (X,Y,Z,B)
            - 2- pallets 1250 mm
            - internal spindle cooling, oil cooler
            - IKZ 20bar
            - tool changer 90-fold (BT 50)
            - chip conveyor
            - ball screw cooling
            - Glass scales Heidenhain
            - CE sign

            approx. 27000h Power On Hours, 12400h Cutting Time


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal DMG MORI NHX 5000


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9105 · Machining Center - Horizontal

          DMG MORI - NHX 5000 - - 2011 - M 730 BM MAPPS IV

          Technical details
          x-travel 730 mm︱y-travel 730 mm︱z-travel 880 mm︱control M 730 BM MAPPS IV︱Main spindle: ︱max. spindle speed 12.000 min/-1︱power capacity - milling spindle 15 / 11 kW︱max. Torque 102 Nm︱tool taper SK 40 ︱distance spindle center to table 80 - 800 mm︱distance Spindlenose and center of table 70 - 950 mm︱pallet changer: ︱numbers of pallets 2 ︱size of pallet 500 x 500 mm︱max. workpiece weight 500 kg︱max. workpiecediameter 800 mm︱max. workpiece height 1.100 mm︱change time of pallets 9,5 sec︱Indexing-time 1,49 sec︱B-axis (table) 1 °︱
          CNC - MachiningCenter Horizontal DMG MORI - NHX 5000 - 2 pos. palletchanger - WITHOUT tools
            x-travel 730 mm
            y-travel 730 mm
            z-travel 880 mm
            control M 730 BM MAPPS IV
            max. spindle speed 12.000 min/-1
            power capacity - milling spindle 15 / 11 kW
            max. Torque 102 Nm
            tool taper SK 40
            distance spindle center to table 80 - 800 mm
            distance Spindlenose and center . 70 - 950 mm
            numbers of pallets 2
            size of pallet 500 x 500 mm
            max. workpiece weight 500 kg
            max. workpiecediameter 800 mm
            max. workpiece height 1.100 mm
            change time of pallets 9,5 sec
            Indexing-time 1,49 sec
            B-axis (table) 1 °
            Description :
            CNC - MachiningCenter Horizontal
            DMG MORI - NHX 5000

            - 2 pos. palletchanger
            - WITHOUT tools




        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal STARRAG HECKERT HEC 800


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03256 · Machining Center - Horizontal

          STARRAG HECKERT - HEC 800 - - 2008 - Siemens 840D

          Technical details
          x-travel 1450 mm︱y-travel 1100 mm︱z-travel 1300 mm︱Control Siemens 840D ︱working spindle: ︱forward bearing diameter 100 mm︱tool taper SK 50 ︱spindle turning speed range 20-6000 U/min︱rapid travel x/y/z 60 m/min︱feed range x/y/z, infinitely variable 1 - 60000 mm/min︱weight of the machine ca. 31 t︱
          Equipment / Accessories: - automatic pallet changer with 2 pallets - clamping surface 1000 x 800 mm - max. loading weight per pallet (centre): 2000 kg - max. rotation speed of the table: 60 rpm - tool tower magazine with 180 places - max. tool-Ø (with free secondary positions): 250 mm - max. tool-Ø (with occupied secondary positions): 110 mm - max. projection length: 450 mm - max. tool weight: 35 kg - max. tilting torque: 50 Nm - max. total mass of all tools per tower: 600 kg - CNC manual control unit - coolant device with paper belt filter - internal coolant supply 80 bar - chip conveyor - interface for Renishaw touch probe, receiving module and measuring cycles for milling
            x-travel 1450 mm
            y-travel 1100 mm
            z-travel 1300 mm
            Control Siemens 840D
            forward bearing diameter 100 mm
            tool taper SK 50
            spindle turning speed range 20-6000 U/min
            rapid travel x/y/z 60 m/min
            feed range x/y/z, infinitely var. 1 - 60000 mm/min
            weight of the machine ca. 31 t
            Description :
            Equipment / Accessories:
            - automatic pallet changer with 2 pallets
            - clamping surface 1000 x 800 mm
            - max. loading weight per pallet (centre): 2000 kg
            - max. rotation speed of the table: 60 rpm
            - tool tower magazine with 180 places
            - max. tool-Ø (with free secondary positions): 250 mm
            - max. tool-Ø (with occupied secondary positions): 110 mm
            - max. projection length: 450 mm
            - max. tool weight: 35 kg
            - max. tilting torque: 50 Nm
            - max. total mass of all tools per tower: 600 kg
            - CNC manual control unit
            - coolant device with paper belt filter
            - internal coolant supply 80 bar
            - chip conveyor
            - interface for Renishaw touch probe, receiving module and measuring cycles for
            milling


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal STARRAG HECKERT HEC 500 H/V Athletic


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03214 · Machining Center - Horizontal

          STARRAG HECKERT - HEC 500 H/V Athletic - - 2008 - Siemens 840D

          Technical details
          x-travel 900 mm︱y-travel 770 mm︱z-travel 1000 mm︱Control Siemens 840D ︱tool taper SK 50 ︱spindle turning speed range 20 - 6000 U/min︱power capacity at 60% load 30 kW︱max. torque on the spindle at 60% load 1080 Nm︱rapid travel x/y/z 60 m/min︱interference diameter 1150 mm︱weight of the machine ca. 21 t︱
          Equipment / Accessories: - horizontal/vertical head - NC rotary table 360° - 2 times pallet changer 630 x 500 mm - max. load per pallet (centered) 1000 kg - tool magazine with 60 places - max. tool diameter with free adjacent places 325 mm - max. tool diameter with occupied adjacent places 125 mm - max. tool length 700 mm - max. tool weight 35 kg - electronic hand control panel - coolant device with paper band filter - internal coolant supply 80 bar - oil coolant - chip conveyor
            x-travel 900 mm
            y-travel 770 mm
            z-travel 1000 mm
            Control Siemens 840D
            tool taper SK 50
            spindle turning speed range 20 - 6000 U/min
            power capacity at 60% load 30 kW
            max. torque on the spindle at 60. 1080 Nm
            rapid travel x/y/z 60 m/min
            interference diameter 1150 mm
            weight of the machine ca. 21 t
            Description :
            Equipment / Accessories:
            - horizontal/vertical head
            - NC rotary table 360°
            - 2 times pallet changer 630 x 500 mm
            - max. load per pallet (centered) 1000 kg
            - tool magazine with 60 places
            - max. tool diameter with free adjacent places 325 mm
            - max. tool diameter with occupied adjacent places 125 mm
            - max. tool length 700 mm
            - max. tool weight 35 kg
            - electronic hand control panel
            - coolant device with paper band filter
            - internal coolant supply 80 bar
            - oil coolant
            - chip conveyor


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MAKINO A 81 5XR


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-654 · Machining Center - Horizontal

          MAKINO - A 81 5XR - - 2008 - FANUC 310is-pro5

          Technical details
          x-travel 900 mm︱y-travel 800 mm︱z-travel 1.020 mm︱Control FANUC 310is-pro550 m/min︱spindle drive 50 kW︱number of spindle speeds 50-20.000 U/min/rpm︱size of pallet 630x630 mm︱numbers of pallets 2 ︱table weight 1.200 / 520 5XR Kg︱working diameter 1.000 mm︱change time of pallets 14 sec︱weight of tools max. 20 kg︱tool diameter 300 mm︱tool length - max. 690 mm︱magazine 137 x HSK-A 100 ︱tool changing time 1,7 sec︱dayligth 1.300 mm︱Chip coveyor ︱Internal cooling system 70 bar︱
            x-travel 900 mm
            y-travel 800 mm
            z-travel 1.020 mm
            Control FANUC 310is-pro5
            50 m/min
            spindle drive 50 kW
            number of spindle speeds 50-20.000 U/min/rpm
            size of pallet 630x630 mm
            numbers of pallets 2
            table weight 1.200 / 520 5XR Kg
            working diameter 1.000 mm
            change time of pallets 14 sec
            weight of tools max. 20 kg
            tool diameter 300 mm
            tool length - max. 690 mm
            magazine 137 x HSK-A 100
            tool changing time 1,7 sec
            dayligth 1.300 mm
            Internal cooling system 70 bar


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MCM ACTION 2600 FFS


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05884 · Machining Center - Horizontal

          MCM - ACTION 2600 FFS - - 2008 - Fanuc 16 MB

          Technical details
          x-travel 2600 mm︱y-travel 1600 mm︱z-travel 1700 mm︱Control Fanuc 16 MB ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 42 x 18 m︱
          The system requires a space of approx. 42 x 18 m It is designed for "fully automatic operation" in 3 shifts. Components with tolerances of <0.01 mm were produced on the system. Equipment: CNC control Fanuc 16 MB 20-pos pallet changer Pallet size 1250 x 1000 mm Interference circle diameter up to 2700 mm Vertical tool magazine with 599 places HSK-A100 from 3 modules on 4 levels Rotary table (B-axis) with 3,600,000 angular positions Table load 4000 kg Spindle speeds 8,000 rpm. Motor power 26/37 kW Torque 605/707 Nm Chip disposal through two jet pipes in the existing central Chip disposal system Connection to an in-house central coolant system. IKZ spindle with supply of coolant through the center of the tool Cooling unit for working spindle use Electrical control cabinet with air conditioning Protective cover for the work area Protective fence cladding, sheet metal below and safety glass above, for the entire working area of ??the machine. Buffer shelf with 5 tool spaces for quick tool provision Tool cone cleaning High pressure coolant supply 65 bar Laser control of tool availability Inductive button for temperature compensation on the electrospindle Tool Monitor Renishaw button type RMP 60 Rotoclear AR aspirator Machine preparation for hydraulic clamping (on the turntable) Automation of the plant
            x-travel 2600 mm
            y-travel 1600 mm
            z-travel 1700 mm
            Control Fanuc 16 MB
            dimensions of the machine ca. 42 x 18 m
            Description :
            The system requires a space of approx. 42 x 18 m
            It is designed for "fully automatic operation" in 3 shifts.
            Components with tolerances of <0.01 mm were produced on the system.

            Equipment:
            CNC control Fanuc 16 MB
            20-pos pallet changer
            Pallet size 1250 x 1000 mm
            Interference circle diameter up to 2700 mm
            Vertical tool magazine with 599 places HSK-A100
            from 3 modules on 4 levels
            Rotary table (B-axis) with 3,600,000 angular positions
            Table load 4000 kg
            Spindle speeds 8,000 rpm.
            Motor power 26/37 kW
            Torque 605/707 Nm
            Chip disposal through two jet pipes in the existing central
            Chip disposal system
            Connection to an in-house central coolant system.
            IKZ spindle with supply of coolant through the center of the tool
            Cooling unit for working spindle use
            Electrical control cabinet with air conditioning
            Protective cover for the work area
            Protective fence cladding, sheet metal below and safety glass above,
            for the entire working area of ??the machine.
            Buffer shelf with 5 tool spaces for quick tool provision
            Tool cone cleaning
            High pressure coolant supply 65 bar
            Laser control of tool availability
            Inductive button for temperature compensation on the electrospindle
            Tool Monitor
            Renishaw button type RMP 60
            Rotoclear
            AR aspirator
            Machine preparation for hydraulic clamping (on the turntable)
            Automation of the plant


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MAKINO A61


          • ADEM MASCHINEN GMBH
          • Karl-Benz-Straße 1
          • 40764 Langenfeld (Rheinland)
          • Deutschland

          • +49 (0) 2173- 287 77 07
            +49 (0) 2173- 287 77 05
          • adem-maschinen@t-online.de
            www.adem-maschinen.com
          #2000-377 · Machining Center - Horizontal

          MAKINO - A61 - - 2008 - ---

          Technical details
          x-travel --- mm︱y-travel --- mm︱z-travel --- mm︱Control --- ︱total power requirement --- kW︱weight of the machine ca. --- t︱dimensions of the machine ca. --- m︱
            x-travel --- mm
            y-travel --- mm
            z-travel --- mm
            Control ---
            total power requirement --- kW
            weight of the machine ca. --- t
            dimensions of the machine ca. --- m


        • ADEM MASCHINEN GMBH
        • Karl-Benz-Straße 1
        • 40764 Langenfeld (Rheinland)
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal DOOSAN HM500


          • ADEM MASCHINEN GMBH
          • Karl-Benz-Straße 1
          • 40764 Langenfeld (Rheinland)
          • Deutschland

          • +49 (0) 2173- 287 77 07
            +49 (0) 2173- 287 77 05
          • adem-maschinen@t-online.de
            www.adem-maschinen.com
          #2000-372 · Machining Center - Horizontal

          DOOSAN - HM500 - - 2008 -

          Technical details
          x-travel --- mm︱y-travel --- mm︱z-travel --- mm︱total power requirement --- kW︱weight of the machine ca. 13,5 t︱dimensions of the machine ca. --- m︱
            x-travel --- mm
            y-travel --- mm
            z-travel --- mm
            total power requirement --- kW
            weight of the machine ca. 13,5 t
            dimensions of the machine ca. --- m


        • ADEM MASCHINEN GMBH
        • Karl-Benz-Straße 1
        • 40764 Langenfeld (Rheinland)
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MORI SEIKI NH 4000 DCG


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03770 · Machining Center - Horizontal

          MORI SEIKI - NH 4000 DCG - - 2007 - MSX 701 III

          Technical details
          x-travel 560 mm︱y-travel 560 mm︱z-travel 630 mm︱control MSX 701 III ︱power capacity - milling spindle 22 / 18,5 kW︱spindle turning speed - stepless 14.000 1/min︱numbers of tools in magazin 60 BT 40 ︱size of pallet 400 x 400 mm︱max. workpiece diameter on pallets 580 mm︱workpiece height max. 650 mm︱B-axis (table) 1 ° ︱feeds x/y/z -stepless 20.000 mm/min︱rapid travel x/y/z 50.000 mm/min︱total power requirement 54 kVA︱weight of the machine ca. 9.9 t︱dimensions of the machine ca. 2,9 x 3,9 x 2,6 m︱Chip conveyor
          BRAND NEW SPINDEL IN 2022 2- pallet 400 X 400 360° POSITION machining center with 50 bar coolant through spindle.
            x-travel 560 mm
            y-travel 560 mm
            z-travel 630 mm
            control MSX 701 III
            power capacity - milling spindle 22 / 18,5 kW
            spindle turning speed - stepless 14.000 1/min
            numbers of tools in magazin 60 BT 40
            size of pallet 400 x 400 mm
            max. workpiece diameter on palle. 580 mm
            workpiece height max. 650 mm
            B-axis (table) 1 °
            feeds x/y/z -stepless 20.000 mm/min
            rapid travel x/y/z 50.000 mm/min
            total power requirement 54 kVA
            weight of the machine ca. 9.9 t
            dimensions of the machine ca. 2,9 x 3,9 x 2,6 m
            Description :
            BRAND NEW SPINDEL IN 2022
            2- pallet 400 X 400 360° POSITION
            machining center with 50 bar coolant through spindle.


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal BURKHARDT + WEBER MCR 120/80


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03258 · Machining Center - Horizontal

          BURKHARDT + WEBER - MCR 120/80 - - 2007 - Siemens 840D

          Technical details
          x-travel 1600 mm︱y-travel 1250 mm︱z-travel 1800 mm︱Control Siemens 840D ︱b-axis 36000 x 0,001 °︱spindle speed max. 6000 U/min︱drive capacity 60 kW︱tool taper HSK 100-A ︱length in total 350 mm︱diameter 150 mm︱max. boring power axial 37 kW︱max. milling power radial / at tool length 10 kW / 150 mm︱max. tool weight 30 kg︱tool clamping power 40 kN︱total power requirement 100 kW︱dimensions of the machine ca. 9,2 x 8,8 x 6,3 m︱
          This machine is sold together with: - another identical machine type MCR 120/80, year 2007, - two further horizontal machining centres, Burkhardt+Weber, type MCX 900, year 2007 (our stock no. 03253), - and a Fastems rack system. All four machines are connected to this Fastems system. Equipment / Accessories: - tool changer with rack magazine, 208 places - max. tool-Ø: bar tool Ø 750 mm - mechanical borer breakage control upto 750 mm - pallet changer 2-fold with 2 pallets, pallet size 1000 x 800 mm - max. pallet load: 3000 kg - TDS Tool Data Sheet BALLUF - measuring probe RENISHAW OMP 60, Taststift 50 mm - remote diagnosis via modem - coolant system KNOLL: - low pressure 200 l/min, 4 bar - high-pressure: 200 l/min, 30 bar (ejector boring); 80 l/min, 70 bar
            x-travel 1600 mm
            y-travel 1250 mm
            z-travel 1800 mm
            Control Siemens 840D
            b-axis 36000 x 0,001 °
            spindle speed max. 6000 U/min
            drive capacity 60 kW
            tool taper HSK 100-A
            length in total 350 mm
            diameter 150 mm
            max. boring power axial 37 kW
            max. milling power radial / at t. 10 kW / 150 mm
            max. tool weight 30 kg
            tool clamping power 40 kN
            total power requirement 100 kW
            dimensions of the machine ca. 9,2 x 8,8 x 6,3 m
            Description :
            This machine is sold together with:
            - another identical machine type MCR 120/80, year 2007,
            - two further horizontal machining centres, Burkhardt+Weber, type MCX 900,
            year 2007 (our stock no. 03253),
            - and a Fastems rack system.
            All four machines are connected to this Fastems system.

            Equipment / Accessories:
            - tool changer with rack magazine, 208 places
            - max. tool-Ø: bar tool Ø 750 mm
            - mechanical borer breakage control upto 750 mm
            - pallet changer 2-fold with 2 pallets, pallet size 1000 x 800 mm
            - max. pallet load: 3000 kg
            - TDS Tool Data Sheet BALLUF
            - measuring probe RENISHAW OMP 60, Taststift 50 mm
            - remote diagnosis via modem
            - coolant system KNOLL:
            - low pressure 200 l/min, 4 bar
            - high-pressure: 200 l/min, 30 bar (ejector boring); 80 l/min, 70 bar


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal BURKHARDT + WEBER MCX 900


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03253 · Machining Center - Horizontal

          BURKHARDT + WEBER - MCX 900 - - 2007 - Siemens 840D

          Technical details
          x-travel 1600 mm︱y-travel 1400 mm︱z-travel 1500 mm︱Control Siemens 840D ︱b-axis 360000 x 0,001 °︱spindle speed max. 6000 U/min︱drive capacity 37 kW︱tool taper HSK 100-A ︱length in total 350 / 1200 mm︱diameter 150 mm︱max. boring power axial 37 kW︱max. milling power radial / at tool length 10 kW / 150 mm︱max. tool weight 30 / 60 kg︱tool clamping power 40 kN︱total power requirement 80 kW︱dimensions of the machine ca. 9,6 x 8,5 x 5,5 m︱
          This machine is sold together with: - another identical machine type MCX 900, year 2007, - two further horizontal machining centres, Burkhardt+Weber, type MCR 120/80, year 2007 (our stock no. 03258), - and a Fastems rack system. All four machines are connected to this Fastems system. Equipment / Accessories: - tool changer with rack magazine, 298 places - max. tool-Ø: bar tool Ø 750 mm - mechanical borer breakage control upto 1200 mm - pallet changer 2-fold with 2 pallets, pallet size 1000 x 800 mm - max. pallet load: 3000 kg - TDS Tool Data Sheet BALLUF - measuring probe RENISHAW OMP 60, Taststift 50 mm - remote diagnosis via modem - coolant system KNOLL: - low pressure 200 l/min, 4 bar - high-pressure: 200 l/min, 30 bar (ejector boring); 20 l/min, 70 bar
            x-travel 1600 mm
            y-travel 1400 mm
            z-travel 1500 mm
            Control Siemens 840D
            b-axis 360000 x 0,001 °
            spindle speed max. 6000 U/min
            drive capacity 37 kW
            tool taper HSK 100-A
            length in total 350 / 1200 mm
            diameter 150 mm
            max. boring power axial 37 kW
            max. milling power radial / at t. 10 kW / 150 mm
            max. tool weight 30 / 60 kg
            tool clamping power 40 kN
            total power requirement 80 kW
            dimensions of the machine ca. 9,6 x 8,5 x 5,5 m
            Description :
            This machine is sold together with:
            - another identical machine type MCX 900, year 2007,
            - two further horizontal machining centres, Burkhardt+Weber, type MCR 120/80,
            year 2007 (our stock no. 03258),
            - and a Fastems rack system.
            All four machines are connected to this Fastems system.

            Equipment / Accessories:
            - tool changer with rack magazine, 298 places
            - max. tool-Ø: bar tool Ø 750 mm
            - mechanical borer breakage control upto 1200 mm
            - pallet changer 2-fold with 2 pallets, pallet size 1000 x 800 mm
            - max. pallet load: 3000 kg
            - TDS Tool Data Sheet BALLUF
            - measuring probe RENISHAW OMP 60, Taststift 50 mm
            - remote diagnosis via modem
            - coolant system KNOLL:
            - low pressure 200 l/min, 4 bar
            - high-pressure: 200 l/min, 30 bar (ejector boring); 20 l/min, 70 bar


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal DOOSAN H 100


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20105 · Machining Center - Horizontal

          DOOSAN - H 100 - - 2007 - FANUC 18 I MB

          Technical details
          x-travel 2000 mm︱y-travel 1120 mm︱z-travel 1000 mm︱control FANUC 18 I MB ︱numbers of pallets 2 ︱pallet size: 1000 x 1000 mm︱max. workpiece weight 2000 kg︱Spindle RPM 6000 1/min︱spindle drive 22/26 kW︱max. torque on the spindle ︱toolpiece magazine: chain magazine 60 Stück︱rapid travel x/y/z 12 m/min︱distance spindle /table 75 - 1195 mm︱total power requirement 68,46 kVA︱weight of the machine ca. 27 t︱dimensions of the machine ca. m︱
          Horizontal machining centre with: - CNC control FANUC 18iMB - 2 x 1000x1000mm pallets - B-axis with 1° indexing - IKZ - high cooling through the working spindle & external 30-70bar - 60-fold tool magazine ISO 50 - Chip conveyor - CE
            x-travel 2000 mm
            y-travel 1120 mm
            z-travel 1000 mm
            control FANUC 18 I MB
            numbers of pallets 2
            pallet size: 1000 x 1000 mm
            max. workpiece weight 2000 kg
            Spindle RPM 6000 1/min
            spindle drive 22/26 kW
            toolpiece magazine: chain magazi. 60 Stück
            rapid travel x/y/z 12 m/min
            distance spindle /table 75 - 1195 mm
            total power requirement 68,46 kVA
            weight of the machine ca. 27 t
            Description :
            Horizontal machining centre with:
            - CNC control FANUC 18iMB
            - 2 x 1000x1000mm pallets
            - B-axis with 1° indexing
            - IKZ - high cooling through the working spindle & external 30-70bar
            - 60-fold tool magazine ISO 50
            - Chip conveyor
            - CE


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MAZAK HCN 6000 Nexus


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20311 · Machining Center - Horizontal

          MAZAK - HCN 6000 Nexus - - 2005 & 2008 - Mazatrol

          Technical details
          x-travel 800 mm︱y-travel 800 mm︱z-travel 800 mm︱control Mazatrol ︱numbers of pallets 16 ︱size of pallet 500 x 500 mm︱max. workpiece height 1000 mm︱max. workpiecediameter 900 mm︱turning speed range - milling 10000 U/min︱tool taper SK 50 ︱Tool changer 160 pos.︱power capacity - milling spindle 30 kW︱b-axis (table) 360000 x 1 °︱weight of the machine ca. 15 t︱dimensions of the machine ca. - m︱
          Line with 2 HCN 6000 machines and shuttle system 4 clamping cubes, 4 angle plates, 6 parts collectors, approx.450/500 tool holders with their cutting tools equipped with: - CNC control MAZATROL 640M Nexus (2005) - CNC control Mazatrol Matrix (2008) - 16 pallets - 160-position tool changer - chip conveyor - IKZ, external - 360000° indexing table positions - Pallet changer with safety cover - Spindle cooling unit - Flood cooling - Niagara cooling/rinsing system - Blow-out device through the spindle - Coolant and chip protection through fully encapsulated work area - Tool length measuring device and tool breakage monitoring Translated with DeepL.com (free version)
            x-travel 800 mm
            y-travel 800 mm
            z-travel 800 mm
            control Mazatrol
            numbers of pallets 16
            size of pallet 500 x 500 mm
            max. workpiece height 1000 mm
            max. workpiecediameter 900 mm
            turning speed range - milling 10000 U/min
            tool taper SK 50
            Tool changer 160 pos.
            power capacity - milling spindle 30 kW
            b-axis (table) 360000 x 1 °
            weight of the machine ca. 15 t
            dimensions of the machine ca. - m
            Description :
            Line with 2 HCN 6000 machines and shuttle system
            4 clamping cubes, 4 angle plates, 6 parts collectors, approx.450/500 tool
            holders with their cutting tools

            equipped with:
            - CNC control MAZATROL 640M Nexus (2005)
            - CNC control Mazatrol Matrix (2008)
            - 16 pallets
            - 160-position tool changer
            - chip conveyor
            - IKZ, external
            - 360000° indexing table positions
            - Pallet changer with safety cover
            - Spindle cooling unit
            - Flood cooling
            - Niagara cooling/rinsing system
            - Blow-out device through the spindle
            - Coolant and chip protection through fully encapsulated work area
            - Tool length measuring device and tool breakage monitoring

            Translated with DeepL.com (free version)


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal HÜLLER-HILLE BLUESTAR 5


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17832 · Machining Center - Horizontal

          HÜLLER-HILLE - BLUESTAR 5 - - 2005 - SIN 840 D SIEMENS

          Technical details
          x-travel 700 mm︱y-travel 630 mm︱z-travel 700 mm︱Control SIN 840 D SIEMENS︱spindle turning speed - stepless 10.000 U/min︱power capacity at 100 % load 13,00 kW︱feeding force at 40 % ED 18,00 KW︱tool taper HSK-A63 ︱spindle diameter in front bearing 80 mm︱feed X/Y/Z/-axis 1 - 50.000 mm/min︱rapid traverse X/Y/Z 50,00 m/min︱feed capacity X/Y/Z 5,00 kN︱B - axis 360 x 1 °︱B-axis 30,00 U/min︱size of pallet 2x 500 x 500 mm︱workpiece weight 500 kg︱0 700 x 700 x 750 mm︱ tool magacine with 40 Plätzen︱tool length - max. 350 mm︱tool diameter 80 mm︱
          Horizontal machining center with SIEMENS SIN840D (PCU50); chip conveyor, coolant-unit, coolant throu the spindle 40bar at 23 l/min;
            x-travel 700 mm
            y-travel 630 mm
            z-travel 700 mm
            Control SIN 840 D SIEMENS
            spindle turning speed - stepless 10.000 U/min
            power capacity at 100 % load 13,00 kW
            feeding force at 40 % ED 18,00 KW
            tool taper HSK-A63
            spindle diameter in front bearin. 80 mm
            feed X/Y/Z/-axis 1 - 50.000 mm/min
            rapid traverse X/Y/Z 50,00 m/min
            feed capacity X/Y/Z 5,00 kN
            B - axis 360 x 1 °
            B-axis 30,00 U/min
            size of pallet 2x 500 x 500 mm
            workpiece weight 500 kg
            0 700 x 700 x 750 mm
            tool magacine with 40 Plätzen
            tool length - max. 350 mm
            tool diameter 80 mm
            Description :
            Horizontal machining center with SIEMENS SIN840D (PCU50);
            chip conveyor, coolant-unit, coolant throu the spindle 40bar at 23 l/min;



        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal HÜLLER-HILLE BLUESTAR 5


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17833 · Machining Center - Horizontal

          HÜLLER-HILLE - BLUESTAR 5 - - 2005 - SIN 840 D SIEMENS

          Technical details
          x-travel 700 mm︱y-travel 630 mm︱z-travel 700 mm︱Control SIN 840 D SIEMENS︱spindle turning speed - stepless 10.000 U/min︱power capacity at 100 % load 13,00 kW︱feeding force at 40 % ED 18,00 KW︱tool taper HSK-A63 ︱spindle diameter in front bearing 80 mm︱feed X/Y/Z/-axis 1 - 50.000 mm/min︱rapid traverse X/Y/Z 50,00 m/min︱feed capacity X/Y/Z 5,00 kN︱B - axis 360 x 1 °︱B-axis 30,00 U/min︱size of pallet 2x 500 x 500 mm︱workpiece weight 500 kg︱0 700 x 700 x 750 mm︱ tool magacine with 40 Plätzen︱tool length - max. 350 mm︱tool diameter 80 mm︱
          Horizontal machining center with SIEMENS SIN840D (PCU50); chip conveyor, coolant-unit, coolant throu the spindle 40bar at 23 l/min;
            x-travel 700 mm
            y-travel 630 mm
            z-travel 700 mm
            Control SIN 840 D SIEMENS
            spindle turning speed - stepless 10.000 U/min
            power capacity at 100 % load 13,00 kW
            feeding force at 40 % ED 18,00 KW
            tool taper HSK-A63
            spindle diameter in front bearin. 80 mm
            feed X/Y/Z/-axis 1 - 50.000 mm/min
            rapid traverse X/Y/Z 50,00 m/min
            feed capacity X/Y/Z 5,00 kN
            B - axis 360 x 1 °
            B-axis 30,00 U/min
            size of pallet 2x 500 x 500 mm
            workpiece weight 500 kg
            0 700 x 700 x 750 mm
            tool magacine with 40 Plätzen
            tool length - max. 350 mm
            tool diameter 80 mm
            Description :
            Horizontal machining center with SIEMENS SIN840D (PCU50);
            chip conveyor, coolant-unit, coolant throu the spindle 40bar at 23 l/min;



        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MAKINO a81-A137 d


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17992 · Machining Center - Horizontal

          MAKINO - a81-A137 d - - 2005 - FANUC Pro-3

          Technical details
          x-travel 900 mm︱y-travel 800 mm︱z-travel 1020 mm︱Control FANUC Pro-3 ︱turning speeds 8.000 U/min︱size of pallet 630 x 630 mm︱table load capacity 1.200 kg︱tool taper HSK-A 100 ︱number of tools in the magazine 137 ︱NC rotary table 0,001 °︱rapid traverse 50 m/min︱spindle drive 50 kW︱torque 1.005 Nm︱total power requirement 40,00 kW︱weight of the machine ca. 21,00 t︱dimensions of the machine ca. 8,30 x 5,00 x 3,50 m︱
          Horizontal machining center with FANUC Porfessional 3 control, chip conveyor, BLUM measuring probe, through-spindle coolant, 137-station tool magazine, electronic handwheel. Without coolant filter, was connected to center supply.
            x-travel 900 mm
            y-travel 800 mm
            z-travel 1020 mm
            Control FANUC Pro-3
            turning speeds 8.000 U/min
            size of pallet 630 x 630 mm
            table load capacity 1.200 kg
            tool taper HSK-A 100
            number of tools in the magazine 137
            NC rotary table 0,001 °
            rapid traverse 50 m/min
            spindle drive 50 kW
            torque 1.005 Nm
            total power requirement 40,00 kW
            weight of the machine ca. 21,00 t
            dimensions of the machine ca. 8,30 x 5,00 x 3,50 m
            Description :
            Horizontal machining center with FANUC Porfessional 3 control,
            chip conveyor, BLUM measuring probe, through-spindle coolant,
            137-station tool magazine, electronic handwheel.
            Without coolant filter, was connected to center supply.


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MAKINO a81-A137 c


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17993 · Machining Center - Horizontal

          MAKINO - a81-A137 c - - 2005 - FANUC Pro-3

          Technical details
          x-travel 900 mm︱y-travel 800 mm︱z-travel 1020 mm︱Control FANUC Pro-3 ︱turning speeds 10.000 U/min︱size of pallet 630 x 630 mm︱table load capacity 1.200 KG︱tool taper HSK-A 100 ︱number of tools in the magazine 137 bar︱NC rotary table 0,001 °︱rapid traverse 50 m/min︱spindle drive 30 kW︱torque 420 Nm︱total power requirement kW︱weight of the machine ca. 21,00 t︱dimensions of the machine ca. 8,30 x 5,00 x 3,50 m︱
          Horizontal machining center with FANUC Porfessional 3 control, chip conveyor, BLUM measuring probe, through-spindle coolant, 137-station tool magazine, electronic handwheel. Without coolant filter, was connected to center supply.
            x-travel 900 mm
            y-travel 800 mm
            z-travel 1020 mm
            Control FANUC Pro-3
            turning speeds 10.000 U/min
            size of pallet 630 x 630 mm
            table load capacity 1.200 KG
            tool taper HSK-A 100
            number of tools in the magazine 137
            NC rotary table 0,001 °
            rapid traverse 50 m/min
            spindle drive 30 kW
            torque 420 Nm
            weight of the machine ca. 21,00 t
            dimensions of the machine ca. 8,30 x 5,00 x 3,50 m
            Description :
            Horizontal machining center with FANUC Porfessional 3 control,
            chip conveyor, BLUM measuring probe, through-spindle coolant,
            137-station tool magazine, electronic handwheel.
            Without coolant filter, was connected to center supply.


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MORI SEIKI NH 5000-40


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23009 · Machining Center - Horizontal

          MORI SEIKI - NH 5000-40 - - 2005 - MSX 501

          Technical details
          x-travel 630 mm︱y-travel 600 mm︱z-travel 670 mm︱Control MSX 501 ︱spindle turning speed - stepless 14000 U/min︱tool taper BT 40 ︱pallet chang. with pallet turn. 360x1 degree 2 ︱max. workpiece weight 500 kg︱tool change unit 60 fach ︱table-size 500 x 500 mm︱total power requirement 56 kW︱weight of the machine ca. 11,8 t︱dimensions of the machine ca. 5,8 x 3,6 x 3,0 m︱
            x-travel 630 mm
            y-travel 600 mm
            z-travel 670 mm
            Control MSX 501
            spindle turning speed - stepless 14000 U/min
            tool taper BT 40
            pallet chang. with pallet turn. . 2
            max. workpiece weight 500 kg
            tool change unit 60 fach
            table-size 500 x 500 mm
            total power requirement 56 kW
            weight of the machine ca. 11,8 t
            dimensions of the machine ca. 5,8 x 3,6 x 3,0 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal Krauseco-Mauser FS 630-5


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03584 · Machining Center - Horizontal

          Krauseco-Mauser - FS 630-5 - - 2004 - Siemens

          Technical details
          x-travel 800 mm︱y-travel 630 mm︱z-travel 710 mm︱Control Siemens ︱type 840Dsl ︱Number of spindles 2 St.︱turning speeds 30-12000 U/min︱tool taper HSK 63 ︱Tool changer 80 Pos.︱Feed 1-40.000 mm/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Doppelwendespanner Maschinennummer 0552.80.00
            x-travel 800 mm
            y-travel 630 mm
            z-travel 710 mm
            Control Siemens
            type 840Dsl
            Number of spindles 2 St.
            turning speeds 30-12000 U/min
            tool taper HSK 63
            Tool changer 80 Pos.
            Feed 1-40.000 mm/min
            Description :
            Doppelwendespanner

            Maschinennummer 0552.80.00



        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •