,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          CNC Turning- and Milling Center

          Machinelist: CNC Turning- and Milling Center


          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center DMG MORI CTX beta 1250 TC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20063 · CNC Turning- and Milling Center

          DMG MORI - CTX beta 1250 TC - - 2014 - Siemens 840D

          Technical details
          turning diameter 500 mm︱turning length 1200 mm︱control Siemens 840D ︱greates pass round over bed 700 mm︱Main spindle: ︱turning speed range - main spindle 20 - 5000 min/-1︱power capacity - main spindel 25 /34 kW︱C-Axis 0,0001 °︱spindle diameter 67 mm︱milling spindle ︱milling spindle motor 23 / 13 kW︱milling head speed 18000 U/min︱b-axis +/- 120 °︱axis stroke: ︱x-axis 490 mm︱y-axis +/- 100 mm︱z-axis 1300 mm︱feeds: ︱rapid traverse ( X / Y / Z ) 60 / 22,5 / 30 m/min︱feed power 5,6 / 5,6 / 7,4 kN︱
          CNC - Turning and milling center - 5 axes - CNC control Siemens 840D Ergo Line with ShopTurn - C-axis (0,0001°) - Milling head with B-axis - Y-axis - Coolant device/paper belt filter - chip conveyor - Tool changer 24-fold (HSK A63) - Direct measuring system - IKZ 25bar - Tailstock
            turning diameter 500 mm
            turning length 1200 mm
            control Siemens 840D
            greates pass round over bed 700 mm
            turning speed range - main spind. 20 - 5000 min/-1
            power capacity - main spindel 25 /34 kW
            C-Axis 0,0001 °
            spindle diameter 67 mm
            milling spindle motor 23 / 13 kW
            milling head speed 18000 U/min
            b-axis +/- 120 °
            x-axis 490 mm
            y-axis +/- 100 mm
            z-axis 1300 mm
            rapid traverse ( X / Y / Z ) 60 / 22,5 / 30 m/min
            feed power 5,6 / 5,6 / 7,4 kN
            Description :
            CNC - Turning and milling center - 5 axes
            - CNC control Siemens 840D Ergo Line with ShopTurn
            - C-axis (0,0001°)
            - Milling head with B-axis
            - Y-axis
            - Coolant device/paper belt filter
            - chip conveyor
            - Tool changer 24-fold (HSK A63)
            - Direct measuring system
            - IKZ 25bar
            - Tailstock


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MAZAK Integrex i-100S


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20313 · CNC Turning- and Milling Center

          MAZAK - Integrex i-100S - - 2013 - Mazatrol Matrix 2

          Technical details
          turning diameter 500 mm︱turning length 854 mm︱control Mazatrol Matrix 2 ︱Main Spindle: ︱c-axis 0,0001 °︱chucking diameter 6 "︱spindle motor 11 kW︱spindle turning speed range 6000 U/min︱x-axis 450 mm︱z-axis 904 mm︱y-axis 210 mm︱w-axis 903 mm︱b-axis -30 / +210 °︱bar material dia. 51 mm︱Rapid Travel X / Y / Z-Achse 40 m/min︱2nd Spindle: ︱c-axis 0,0001 °︱power capacity 11 kW︱spindle turning speed range 6000 U/min︱milling spindle
          5-axis simultaneous machining - CNC control Mazatrol Matrix 2 - Main & counter spindle - 6" chuck (B206) - Tool changer (36-fold) HSK - Coolant system - Chip tray
            turning diameter 500 mm
            turning length 854 mm
            control Mazatrol Matrix 2
            c-axis 0,0001 °
            chucking diameter 6 "
            spindle motor 11 kW
            spindle turning speed range 6000 U/min
            x-axis 450 mm
            z-axis 904 mm
            y-axis 210 mm
            w-axis 903 mm
            b-axis -30 / +210 °
            bar material dia. 51 mm
            Rapid Travel X / Y / Z-Achse 40 m/min
            c-axis 0,0001 °
            power capacity 11 kW
            spindle turning speed range 6000 U/min
            Description :
            5-axis simultaneous machining
            - CNC control Mazatrol Matrix 2
            - Main & counter spindle
            - 6" chuck (B206)
            - Tool changer (36-fold) HSK
            - Coolant system
            - Chip tray


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN Puma MX 2500 LST


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20092 · CNC Turning- and Milling Center

          DOOSAN - Puma MX 2500 LST - - 2008 - FANUC 18i TB

          Technical details
          turning diameter 750 mm︱turning length 1520 mm︱control FANUC 18i TB ︱turning diameter over slide 600 mm︱chucking diameter 250 mm︱spindle nose A2 #8 ︱spindle passage 76 mm︱spindle turning speed - stepless 3500 U/min︱spindle drive 26/22 kW︱milling spindle ︱milling spindle drive 15/11 kW︱milling head speed 10.000 U/min︱x-axis 555 mm︱z-axis 1595 / 1640 mm︱y-axis +/- 80 mm︱b-axis 240 °︱speeds of tool 4000 U/min︱work piece power 5,5 kW︱total power requirement 93,93 kVA︱weight of the machine ca. 15,5 t︱
          - CNC control FANUC Series 18i TB - Milling Head (Capto C6) - lower Tool Revolver 12-fold, driven tools 5,5kW - ATC for 40 tools - main and sub spindle with C-Axis each - Chip Conveyor - Coolant with paperband filter ca 12.000h "Run Time"
            turning diameter 750 mm
            turning length 1520 mm
            control FANUC 18i TB
            turning diameter over slide 600 mm
            chucking diameter 250 mm
            spindle nose A2 #8
            spindle passage 76 mm
            spindle turning speed - stepless 3500 U/min
            spindle drive 26/22 kW
            milling spindle drive 15/11 kW
            milling head speed 10.000 U/min
            x-axis 555 mm
            z-axis 1595 / 1640 mm
            y-axis +/- 80 mm
            b-axis 240 °
            speeds of tool 4000 U/min
            work piece power 5,5 kW
            total power requirement 93,93 kVA
            weight of the machine ca. 15,5 t
            Description :
            - CNC control FANUC Series 18i TB
            - Milling Head (Capto C6)
            - lower Tool Revolver 12-fold, driven tools 5,5kW
            - ATC for 40 tools
            - main and sub spindle with C-Axis each
            - Chip Conveyor
            - Coolant with paperband filter

            ca 12.000h "Run Time"



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center SMEC SL 2500 LY (B)


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20290 · CNC Turning- and Milling Center

          SMEC - SL 2500 LY (B) - - 12/2020 - Siemens 828D

          Technical details
          turning diameter 360 mm︱turning diameter over bed 650 mm︱turning length 1265 mm︱bar material dia. 77 mm︱control Siemens 828D ︱x-axis 235 mm︱y-axis 100 mm︱z-axis 1375 mm︱main spindle: ︱max. turning speeds 3500 min/-1︱drive capacity - main spindle 28/33,6 kW︱spindle bore 86 mm︱rapid traverse: ︱rapid traverse ( x / y / z ) 30/10/30 m/min︱tail stock ︱tailstock quill diameter 100 mm︱tailstock quill stroke 110 mm︱tailstock adjustment 970 mm︱b-axis 1346 mm︱total power requirement 55 kVA︱
          equipped with: - CNC control Siemens 828D with Manual Guide I - 12-position tool turret (BMT65) -- driven tools 5000 rpm, 5,5/8,3kW -- 2 rotating axial tool holders -- 2 radial rotating tool holders - Bar loader interface - coolant system 10bar - tool measuring probe - Tailstock (MT 5) - Chip conveyor Power On: 4519h Cutting Time: 860h
            turning diameter 360 mm
            turning diameter over bed 650 mm
            turning length 1265 mm
            bar material dia. 77 mm
            control Siemens 828D
            x-axis 235 mm
            y-axis 100 mm
            z-axis 1375 mm
            max. turning speeds 3500 min/-1
            drive capacity - main spindle 28/33,6 kW
            spindle bore 86 mm
            rapid traverse ( x / y / z ) 30/10/30 m/min
            tailstock quill diameter 100 mm
            tailstock quill stroke 110 mm
            tailstock adjustment 970 mm
            b-axis 1346 mm
            total power requirement 55 kVA
            Description :
            equipped with:
            - CNC control Siemens 828D with Manual Guide I
            - 12-position tool turret (BMT65)
            -- driven tools 5000 rpm, 5,5/8,3kW
            -- 2 rotating axial tool holders
            -- 2 radial rotating tool holders
            - Bar loader interface
            - coolant system 10bar
            - tool measuring probe
            - Tailstock (MT 5)
            - Chip conveyor

            Power On: 4519h
            Cutting Time: 860h


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          A CNC Turning and Milling Center from LagerMaschinen
          A CNC turning and milling center from LagerMaschinen - good for business

          A CNC turning and milling center from LagerMaschinen will certainly be a great advantage to your small or medium-sized business. Choose from a CNC turning and milling center that fits your needs exactly. A CNC turning and milling center uses either one of multiple axes to calibrate and work wood metal or other hard materials. When purchasing a CNC turning and milling center from LagerMaschinen you'll be able to ensure quality control as well as to speak directly with sellers. Let LagerMaschinen's qualified experts assist you in your search for your next business machine.

          CNC turning and milling center from LagerMaschinen

          A CNC turning and milling center (also known as a lathe) can be used for many different purposes. No matter what your end product a CNC turning and milling center from LagerMaschinen is just what you need. Used machines are more economically viable as well as kinder to the environment. A CNC turning and milling center from LagerMaschinen could be the logical solution for your production concerns. By purchasing your CNC turning and milling center through LagerMaschinen and its team of experts and professionals you'll not only find precisely what you're looking for but will also ensure that it lasts for a lifetime.

          CNC turning and milling center - the most logical choice

          No matter what type of CNC turning and milling center you're looking for LagerMaschinen has what you need. Log on create and account and start shopping at LagerMaschinen today.