CNC-Vertical Turret Lathe - Single Col.

YS-VL-1000 | YS-VL-1200 | ︱faceplate diameter 1000|1250|1600|2000 mm︱swing diameter 1350|1600|2000|2500 mm︱turning height 1070|1350|1350|1700 mm︱max. turning diameter 1150|1350|1800|2300 mm︱table load 4|5|8|10 t︱table rotation speed 2 - 600 | 2 - 300 | 2 - 2 U/min︱max. torque on the faceplate 10000|12500|18500|54000 Nm︱Travel of Ram (vertical) 800 | 900 | 900 | 1000 mm︱Travel of ram (horiz.) 1350 | 1475 | 1650 | 2275 mm︱ram head dimension 230 x 230|250 x 250|250 x mm︱rapid power traverse in X-and Z direction 10/12|10/12|10/12|10/10 m/min︱feeds 0,1 - 50 mm/U︱feed speeds 0 - 1260 mm/min︱Tool changer 12 (C-Achse mit 16) ︱tool taper ︱drive capacity - spindle motor 37/45| 37/45 (60/75 opt.) kW︱Machine height 5330 |5500 |5500|6600 mm︱machine length 4600 |4700 |5050| 4950 mm︱machine width 5500 |5800 |6300|7320 mm︱

---

Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer

YS-VL-3000 ︱faceplate diameter 3000 mm︱swing diameter 3500 mm︱turning height 1650 mm︱max. turning diameter 3400 mm︱table load 40 t︱table rotation speed 2-40/41-120 U/min︱max. torque on the faceplate 64500 Nm︱Travel of Ram (vertical) 1000 (1400 opt.) mm︱Travel of ram (horiz.) 2775 mm ︱ram head dimension 280x280 mm︱rapid power traverse in X-and Z direction 10/10 m/min︱feeds 0,1 - 50 mm/U︱feed speeds 0 - 1260 mm/min︱Tool changer 12 (C-Achse mit 16) ︱tool taper SK50/BT50 ︱drive capacity - spindle motor 60/75 (75/100) kW︱Machine height 6700 mm︱machine length 6100 mm︱machine width 8700 mm︱

---

Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer

faceplate diameter 2500 mm︱swing diameter 3000 mm︱turning height 1700 mm︱max. turning diameter 2800 mm︱weight of the machine ca. 53 t︱

---

Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer

turning diameter 1250 mm︱swing diameter 1160 mm︱turning height 800 mm︱faceplate diameter 1000 mm︱total power requirement 97 kW︱weight of the machine ca. 25000 t︱dimensions of the machine ca. m︱

---

P I T T L E R (Germany) CNC Controlled Vertical Turning and Milling Centre With Tool Changer and Pallet Changer Model PV 1250 / 1-1 Year 1994 _______________________________________________________ Turning Ø max. 1,000 mm Swing Ø max. 1,160 mm Turning length 800 mm X Axis - horizontal 1,300 mm Y Axis - vertical 800 mm Feed / quick feed 16,000 mm/min Main spindle speeds 10 - 1,000 rpm ! Main spindle speeds via separate C Axis 0.1 - 16 rpm Positioning accuracy of C Axis 360° + / - 5 " Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speed 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Spindle drive 63 kW Total electrical load 97 kW - 400 V - 50 Hz Weight, approx. 25,000 kg Accessories / Special Features * CNC Contouring Control Model NUM 760 TX in 3 axes, with graphics, menu-guided dialogue programming, and all the usual options, cycles and sub-programs; with tool compensation, thread cutting cycles, constant speed programming, etc. * 2-axis CNC tool slide (1,300 x 800 mm) with driven tool holders, ISA 50 / 22 kW. * Tool changer with 16 tool holders, max. length 450 mm, max. weight 40 kg. * Pallet changing system, pallet size 630 x 630 mm, with setup station with indexing and drive of the pallet, and 2 separate pallet stations. * 3 pallets, 630 x 630 mm. * 3-jaw chuck, Ø 650 mm. * Face plate, Ø 900 mm. * Chip conveyor. * Band filter coolant equipment. * Completely covered working area, including safety fence for the pallet changing area. * Separate switch cabinet. * Operating manual. * Approx. 20 tool holders. * Various other accessories. High performance universal turning and milling centre for full range of machining (turning, boring, drilling, milling, and threading) with high speeds and high turning volume. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have a selection of modern lathes available. Please let us know your requirements

turning diameter over bed 310 mm︱turning diameter over slide rest 178 mm︱turning length 910 mm︱spindle cone MT5 -CAMLOK D1 DIN 55029︱spindle turning speed range 80 - 2000 U/min︱spindle bore 38 mm︱number of feeds 32 Stk︱feeds 0,052 - 1,392 mm/U︱thread - mm pitch 0,4 -7 mm︱thread - inch 56 - 8 Gang/ inch.︱voltage 400 V / 50 Hz︱engine output 1,1 kW︱weight of the machine ca. 0,45 t︱dimensions of the machine ca. 1,6 x 0,75 x 1,4 m︱

---

• incl. 3 and 4 jaw chuck • fixed and followed steadies • reducing bush MK4 - MK3 • 2 fixed lathe centers • 1 Set of changing wheels • 4-way steel holder • 2-axis digital display, SINO • Article-No. 15668

turning diameter over bed 330 mm︱turning diameter over slide rest 160 mm︱turning length 1000 mm︱turning dia. in gap 476 mm︱spindle turning speed range 70 - 2000 U/min︱spindle bore 38 mm︱number of feeds 36 Stk︱feed range 0,02 - 2,7 mm/U︱voltage 400 V / 50 Hz︱total power requirement 1,5 kW︱weight of the machine ca. 0,6 t︱dimensions of the machine ca. 1,85 x 0,7 x 1,55 m︱

---

• incl. 3 and 4 jaw chuck • fixed and followed steadies • reducing bush MK4 - MK3 • 2 fixed lathe centers • 1 Set of changing wheels • coolant device • SINO digital display, • Art.-No. 15659

turning diameter over bed 280 mm︱turning diameter over slide rest 170 mm︱turning length 700 mm︱spindle turning speed range 0 - 2500 U/min︱feed range 0,07 - 0,2 mm/U︱voltage 230 V︱total power requirement 1,0 kW︱weight of the machine ca. 0,19 t︱dimensions of the machine ca. 1,390 x 0,700 x 0,630 m︱

---

• incl. 3 jaw chuck, • 4 jaw chuck, • followed and fixed steady, • 2 fixed centers, • Set of changing wheels, • with under chassis

turning diameter over bed 460 mm︱turning diameter over slide rest 274 mm︱turning length 1000 mm︱turning dia. in gap 690 mm︱spindle bore 58 mm︱spindle turning speed range 25-2000 U/min︱feeds - longitudinal 0,031-1,7 mm/U︱voltage 400 V / 50 Hz︱total power requirement 5,5 kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 2,3 x 1,0 x 1,5 m︱

---

• with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • frequency converter • Machine light

turning diameter over bed 360 mm︱turning diameter over slide rest 220 mm︱turning length 1000 mm︱turning dia. in gap 515 mm︱spindle bore 38 mm︱spindle turning speed range 30 - 2200 U/min︱feeds - longitudinal 0,067 - 1,485 mm/U︱feeds - cross 0,033 - 0,742 mm/U︱voltage 400 V / 50 Hz︱total power requirement 2,5 kW︱weight of the machine ca. 0,75 t︱dimensions of the machine ca. 2,3 x 1,0 x 1,5 m︱

---

• with 3 jaw chuck, • steady • machine illumination • inverter for infinitely drive adjustment • article-no. 30618 • extra charge for 2-axis DRO, Newall - € 1885,-. • extra charge for quick change holder and 3 tool holder - € 630,-

turning diameter over bed 360 mm︱turning diameter over slide rest 220 mm︱turning length 1000 mm︱turning dia. in gap 515 mm︱spindle bore 38 mm︱spindle turning speed range 30 - 2200 U/min︱feeds - longitudinal 0,067 - 1,485 mm/U︱feeds - cross 0,033 - 0,742 mm/U︱voltage 400 V / 50 Hz︱total power requirement 2,5 kW︱weight of the machine ca. 0,75 t︱dimensions of the machine ca. 2,3 x 1,0 x 1,5 m︱

---

• 3-jaw chuck (Ø 160 mm) • 4-jaw chuck (Ø 200 mm) • Fixed and rotating steady rest • halogen machine lighting • Variable speeds (3 steps) • Machine is manufactured in accordance with CE directives. • additional price for quick change tool holder + 3 tool holders + € 580,-.

turning diameter over bed 310 mm︱turning diameter over slide rest 178 mm︱turning length 910 mm︱turning dia. in gap 420 mm︱spindle turning speed range 70 - 2000 U/min︱spindle bore 38 mm︱number of feeds 18 Stk︱feed range 0,052 - 1,392 mm/U︱metrical thread cutting 0,4 - 7 mm︱voltage 230 / 50 V Hz︱total power requirement 1,1 kW︱weight of the machine ca. 0,45 t︱dimensions of the machine ca. 1,6 x 0,8 x 1,4 m︱

---

• incl. 3 and 4 jaw chuck Ø 160 mm • fixed and followed steadies • reducing bush MK4 - MK3 • quadruple steel holder • change gear set • coolant device • SINO 2-axis digital display • variable speeds by means of inverter, clockwise + anticlockwise rotation

turning diameter over bed 200 mm︱centre distance 500 mm︱centre height 100 mm︱upper slide 80 ︱spindle passage 15 mm︱turning speeds 90-1400 U/min︱diameter of quill 22 mm︱quill stroke 80 mm︱weight of the machine ca. 190 kg︱

---

turning diameter over bed mm︱turning diameter over slide rest mm︱turning length mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱

---

height of centers: 90 mm
center distance: 400 mm
Pycbcoapn
spindle boring: 25 mm
speed range: 280 u. 900 rpm
engine: 380 V, ca. 1 kW
space needed: 1150 x 650 x 1120 mm
weight: 253 kg

turning diameter over bed 260 mm︱turning diameter over slide rest 140 mm︱turning length 500 mm︱centre height 125 mm︱bed width 160 mm︱spindle turning speed range 16: 110-3600 U/min︱spindle bore 28 mm︱face slide travel 120 mm︱upper slide-adjustment 120 mm︱tailstock quill taper MT 2 ︱tailstock quill adjustment 80 mm︱drive motor 0,37 / 0,88 kW︱weight of the machine ca. 350 kg︱dimensions of the machine ca. 1,3 x 0,6 x 1,2 m︱Electric 380 Volt ︱chuck 140 mm︱Collet device with collets 24: 1-21 mm ︱Boring chuck ︱

---

turning diameter over bed 250 mm︱turning diameter over slide rest 110 mm︱turning length 350 mm︱center height over bed 125 mm︱centre distance 350 mm︱bed width 170 mm︱spindle bore 24 mm︱turning speed range 440 - 3600 U/min︱voltage 380 V︱weight of the machine ca. 350 kg︱dimensions of the machine ca. 1,25 x 0,55 x 1,25 m︱

---

- revolver 5-fold - Collet equipment