,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          CNC Lathe

          Machinelist: CNC Lathe


          CNC Lathe

          used Lathes CNC Lathe GILDEMEISTER Sprint 20-8 linear


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9116 · CNC Lathe

          GILDEMEISTER - Sprint 20-8 linear - - 2013 - Fanuc 310is

          Technical details
          turning diameter max. 20 mm︱turning length max. 80 mm︱control Fanuc 310is ︱Main spindle: ︱max. usable bar diameter 20 (25) mm︱inner draw tube diameter 28,5 mm︱Max. speed main spindle 10.000 min/-1︱power capacity - main spindel 3,7 kW︱max. Torque 9,4 Nm︱C-Axis C1: 360 °︱Subspindle: ︱inner draw tube diameter 28,5 mm︱Max. speed main spindle 10.000 min/-1︱power capacity - main spindel 3,7 kW︱max. Torque 9,4 Nm︱C-Axis C2: 360 °︱axis stroke: ︱x-axis 1: 50 / 2: 240 mm︱y-axis 1: 350 / 2: 120 mm︱z-axis 1: 80 / 2: 300 mm︱
          CNC-Short-Lathe GILDEMEISTER - Sprint 20-8 - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C ) - Main- and Subspindle - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A - Coolant System DELTATHERM
            turning diameter max. 20 mm
            turning length max. 80 mm
            control Fanuc 310is
            max. usable bar diameter 20 (25) mm
            inner draw tube diameter 28,5 mm
            Max. speed main spindle 10.000 min/-1
            power capacity - main spindel 3,7 kW
            max. Torque 9,4 Nm
            C-Axis C1: 360 °
            inner draw tube diameter 28,5 mm
            Max. speed main spindle 10.000 min/-1
            power capacity - main spindel 3,7 kW
            max. Torque 9,4 Nm
            C-Axis C2: 360 °
            x-axis 1: 50 / 2: 240 mm
            y-axis 1: 350 / 2: 120 mm
            z-axis 1: 80 / 2: 300 mm
            Description :
            CNC-Short-Lathe
            GILDEMEISTER - Sprint 20-8

            - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C )
            - Main- and Subspindle
            - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A
            - Coolant System DELTATHERM


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe GILDEMEISTER CTX 310


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203442 · CNC Lathe

          GILDEMEISTER - CTX 310 - - 2006 - 840 D Siemens

          Technical details
          turning diameter 0260 mm︱turning length 580 mm︱control 840 D Siemens︱centre height 190 mm︱turning diameter over bed 500 mm︱turning dia. over face-slide 365 mm︱Main spindle: ︱turning speed range - main spindle max. 6.000 min/-1︱power capacity - main spindel 10 / 7,5 kW︱max. Torque 115 / 86 Nm︱spindle diameter in front bearing 100 mm︱spindle bore 68,5 mm︱usable bar diameter 52 mm︱chucking diameter 210 mm︱axis stroke: ︱travel -x axis 185 mm︱travel -z axis 580 mm︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 30
          CNC - Lathe with sub spindle. Control Siemens 840 D. Machine has Y- axe and live tooling. We supply an IEMCA Kid 70 bar loader along with the machine.
            turning diameter 0260 mm
            turning length 580 mm
            control 840 D Siemens
            centre height 190 mm
            turning diameter over bed 500 mm
            turning dia. over face-slide 365 mm
            turning speed range - main spind. max. 6.000 min/-1
            power capacity - main spindel 10 / 7,5 kW
            max. Torque 115 / 86 Nm
            spindle diameter in front bearin. 100 mm
            spindle bore 68,5 mm
            usable bar diameter 52 mm
            chucking diameter 210 mm
            travel -x axis 185 mm
            travel -z axis 580 mm
            number of toolpositions 12 pos.
            tool taper VDI 30
            Description :
            CNC - Lathe with sub spindle. Control Siemens 840 D. Machine has Y- axe and
            live tooling. We supply an IEMCA Kid 70 bar loader along with the machine.


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe GILDEMEISTER CTX 320 Linear V6


          • MAMACH Machinenhandel BV
          • Campagneweg 10
          • 4761 RM Zevenbergen
          • Niederlande

          • +31 (0)168325354
          • info@mamach.nl
            www.mamach.nl
          #2041-2734 · CNC Lathe

          GILDEMEISTER - CTX 320 Linear V6 - - 2005 - Siemens 840D Powerline

          Technical details
          Control Siemens 840D Powerline ︱Turning diameter 240 mm︱Turning length mm︱Spindle bore diameter 51 mm︱Spindle Speed 6000 1/min︱Spindle motor 20/16 kW︱X-Axis movement 141 mm︱Y-Axis movement 32 mm︱Z-Axis movement 450 mm︱W-axis movement (subspindle to mainspindle) 380 mm︱Minimum indexing C-Axis main Spindle 0,001 °︱Minimum Indexing C Axis Sub Spindle 0,001 °︱Number of tools on turret 12 x︱Number of driven tools 12 x︱Spindle speed driven tools 5000 1/min︱Tool Taper DIN 69880-30 ︱Spindle motor driven tools kW︱Required floor space mm︱Length 3912 mm︱Width 2141 mm︱
            Control Siemens 840D Powerline
            Turning diameter 240 mm
            Spindle bore diameter 51 mm
            Spindle Speed 6000 1/min
            Spindle motor 20/16 kW
            X-Axis movement 141 mm
            Y-Axis movement 32 mm
            Z-Axis movement 450 mm
            W-axis movement (subspindle to m. 380 mm
            Minimum indexing C-Axis main Spi. 0,001 °
            Minimum Indexing C Axis Sub Spin. 0,001 °
            Number of tools on turret 12 x
            Number of driven tools 12 x
            Spindle speed driven tools 5000 1/min
            Tool Taper DIN 69880-30
            Length 3912 mm
            Width 2141 mm
            Description :



        • MAMACH Machinenhandel BV
        • Campagneweg 10
        • 4761 RM Zevenbergen
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe GILDEMEISTER CTX 510


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5670 · CNC Lathe

          GILDEMEISTER - CTX 510 - - 2004 - Fanuc

          Technical details
          turning diameter 465 mm︱turning length 1050 mm︱control Fanuc ︱total power requirement kW︱weight of the machine ca. 7500 kg︱dimensions of the machine ca. m︱
            turning diameter 465 mm
            turning length 1050 mm
            control Fanuc
            weight of the machine ca. 7500 kg


        • Hop Machines
        • Wethouder Lindersstraat 145
        • 5455 GK Wilbertoord
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe GILDEMEISTER NEF 520


          • Glaub Werkzeugmaschinen GmbH
          • Industriestraße 36
          • 74194 Neuenstadt am Kocher
          • Deutschland

          • +49 (0) 7139 9366 744
            +49 (0) 7139 9365 794
          • service@gwg-maschinen.com
            www.gwg-maschinen.com
          #2029-1186 · CNC Lathe

          GILDEMEISTER - NEF 520 - - 2000 - Heidenhain

          Technical details
          turning diameter - mm︱turning length - mm︱control Heidenhain ︱weight of the machine ca. 3,1 t︱dimensions of the machine ca. 2900/3400x1953x1825 m︱
            turning diameter - mm
            turning length - mm
            control Heidenhain
            weight of the machine ca. 3,1 t
            dimensions of the machine ca. 2900/3400x1953x1825 m


        • Glaub Werkzeugmaschinen GmbH
        • Industriestraße 36
        • 74194 Neuenstadt am Kocher
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe GILDEMEISTER CTX 500


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9180 · CNC Lathe

          GILDEMEISTER - CTX 500 - - 1997 - Eltropilot Heidenhain

          Technical details
          turning length 1.000 mm︱swing diameter max. over bed cover 600 mm︱swing diameter above cross guideway 420 mm︱control Eltropilot Heidenhain︱travel -x axis 275 mm︱travel -z axis 1.065 mm︱Main spindle: ︱turning speed range - main spindle 16 - 3.200 min/-1︱power capacity - main spindel 27 kW︱max. Torque 800 Nm︱spindle diameter in front bearing 120 mm︱spindle bore 85 mm︱chucking diameter 260 mm︱spindle head 220H5 ︱turret: ︱number of toolpositions 12 pos.︱Shank diameter 40 mm︱turret change time 0,8 sec.︱Tailstock: ︱diameter of quill 100 mm︱
          CNC-Lathe GILDEMEISTER - CTX 500
            turning length 1.000 mm
            swing diameter max. over bed cov. 600 mm
            swing diameter above cross guide. 420 mm
            control Eltropilot Heidenhain
            travel -x axis 275 mm
            travel -z axis 1.065 mm
            turning speed range - main spind. 16 - 3.200 min/-1
            power capacity - main spindel 27 kW
            max. Torque 800 Nm
            spindle diameter in front bearin. 120 mm
            spindle bore 85 mm
            chucking diameter 260 mm
            spindle head 220H5
            number of toolpositions 12 pos.
            Shank diameter 40 mm
            turret change time 0,8 sec.
            diameter of quill 100 mm
            Description :
            CNC-Lathe
            GILDEMEISTER - CTX 500


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe GILDEMEISTER CTX 400


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03404 · CNC Lathe

          GILDEMEISTER - CTX 400 - - 1996 - ELECTRO PILOT turn plus

          Technical details
          control ELECTRO PILOT turn plus︱centre height 260 mm︱turning length 640 mm︱swing diameter over slide rest 290 mm︱greates pass round over bed 500 mm︱diameter of spindle flange 140 h5 mm︱spindle diameter in front bearing 100 mm︱spindle bore 72 mm︱hollow spindle diameter 65 mm︱max. torque on the spindle 150 Nm︱longitudinal stroke 650 mm︱chucking diameter max. 250 mm︱face stroke 212 ︱tailstock quill diameter 80 mm︱tailstock quill taper MT 4 ︱tailstock travel 100 mm︱feeds - longitudinal 0,5 - 5000 mm/min︱feeds - cross 0,5 - 5000 mm/min︱rapid travel - longitudinal/face 10 m/min︱power feed longitudinal 8000 N︱
          2-step directly spindle drive accessory: tail stock, Sauterrevolver twelvefold, incl. documentation CNC CONTROL HEIDENHEIN EPL TOOLS VDI 30 CHIP CONVOYER
            control ELECTRO PILOT turn plus
            centre height 260 mm
            turning length 640 mm
            swing diameter over slide rest 290 mm
            greates pass round over bed 500 mm
            diameter of spindle flange 140 h5 mm
            spindle diameter in front bearin. 100 mm
            spindle bore 72 mm
            hollow spindle diameter 65 mm
            max. torque on the spindle 150 Nm
            longitudinal stroke 650 mm
            chucking diameter max. 250 mm
            face stroke 212
            tailstock quill diameter 80 mm
            tailstock quill taper MT 4
            tailstock travel 100 mm
            feeds - longitudinal 0,5 - 5000 mm/min
            feeds - cross 0,5 - 5000 mm/min
            rapid travel - longitudinal/face 10 m/min
            power feed longitudinal 8000 N
            Description :
            2-step directly spindle drive
            accessory: tail stock, Sauterrevolver twelvefold,
            incl. documentation
            CNC CONTROL HEIDENHEIN EPL
            TOOLS VDI 30 CHIP CONVOYER


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe GILDEMEISTER GAC 65


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02849 · CNC Lathe

          GILDEMEISTER - GAC 65 - - 1992 - EPL 8 Achsen

          Technical details
          turning diameter 140 mm︱turning length 274 mm︱control EPL 8 Achsen︱total power requirement 20 kW︱weight of the machine ca. ca. 4,2 t︱
          4 Axes - C-Axe - 1 x 6 driven tools - turret head: 12 tools - IRCO load magazine- hollow clamping equipment - gripping turning chuck for backside machining- chip convoyer, 3 stations for turning diameter: 140 mm, turning lenght: 274 mm, Control: EPL 8 axes. bar material diameter: 65 mm, spindel turning speed stepless: 50-4500 UpM- spindle headstock drive 18 kW - stroke slide I and II: 70 mm. Stroke slide III and IV 104 mm - stroke turret 40 x 274 mm.
            turning diameter 140 mm
            turning length 274 mm
            control EPL 8 Achsen
            total power requirement 20 kW
            weight of the machine ca. ca. 4,2 t
            Description :
            4 Axes - C-Axe - 1 x 6 driven tools - turret head: 12 tools - IRCO load
            magazine-
            hollow clamping equipment - gripping turning chuck for backside machining- chip
            convoyer,
            3 stations for turning diameter: 140 mm, turning lenght: 274 mm, Control: EPL 8
            axes.
            bar material diameter: 65 mm, spindel turning speed stepless: 50-4500 UpM-
            spindle headstock drive 18 kW - stroke slide I and II: 70 mm.
            Stroke slide III and IV 104 mm - stroke turret 40 x 274 mm.


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe GILDEMEISTER GAC 42


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-333531 · CNC Lathe

          GILDEMEISTER - GAC 42 - - 1991 -

          Technical details
          turning diameter 42 mm︱turning length 250 mm︱control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC-lathe with bar feed with Sameca bar feed
            turning diameter 42 mm
            turning length 250 mm
            Description :
            CNC-lathe with bar feed
            with Sameca bar feed


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe GILDEMEISTER 3000/830


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-100118 · CNC Lathe

          GILDEMEISTER - 3000/830 - - 1990 - Siemens

          Technical details
          turn - diameter over facing slide 450 mm︱turning diameter over bed 830 mm︱turning diameter mm︱turning length 3000 mm︱control Siemens ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turn - diameter over facing slid. 450 mm
            turning diameter over bed 830 mm
            turning length 3000 mm
            control Siemens


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe GILDEMEISTER GDS 65


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03118 · CNC Lathe

          GILDEMEISTER - GDS 65 - - 1989 - CNC

          Technical details
          turning diameter 290 mm︱turning length 450 mm︱control CNC ︱spindle passage 65 mm︱turning diameter over slide 185 mm︱turning speeds 3000 U/min︱Tool changer 12 ︱work piece power VDI 40 ︱live tooling ︱chip conveyor kW︱coolant ︱swing diameter 600 mm︱total power requirement 45 kW︱weight of the machine ca. 4,7 t︱dimensions of the machine ca. 4,5x2,5x2,3 m︱
            turning diameter 290 mm
            turning length 450 mm
            control CNC
            spindle passage 65 mm
            turning diameter over slide 185 mm
            turning speeds 3000 U/min
            Tool changer 12
            work piece power VDI 40
            swing diameter 600 mm
            total power requirement 45 kW
            weight of the machine ca. 4,7 t
            dimensions of the machine ca. 4,5x2,5x2,3 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe GILDEMEISTER Twin 32


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-100104 · CNC Lathe

          GILDEMEISTER - Twin 32 - - - Sinumerik 840 D

          Technical details
          turning diameter 100 mm︱turning length 580 mm︱control Sinumerik 840 D ︱total power requirement 50 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. 4,8 x 2,2 x 2 m︱
            turning diameter 100 mm
            turning length 580 mm
            control Sinumerik 840 D
            total power requirement 50 kW
            weight of the machine ca. 6 t
            dimensions of the machine ca. 4,8 x 2,2 x 2 m


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          CNC Lathes provide accuracy for the most important projects.
          CNC Lathes guarantee complete accuracy and uniform results.

          When mass-producing a tool part or complete product absolute accuracy is key. With Computer Numerical Control - CNC - accuracy is now guaranteed and no longer dependent on human control. CNC lathes have replaced conventional lathes in the last few years particularly regarding products where measurements must be absolutely uniform as a matter of safety. Exact specifications and measurements are loaded into the machine as a data file and after a trial run pieces are cut with complete precision while under the supervision of a CNC lathe operator. In this way CNC lathes are guaranteed to last for many years as the heavy physical strain put on normal lathe machines is not the case here. CNC lathes can be extremely expensive when bought new but now with LagerMaschinen you can still outfit your business with a CNC lathe without overstepping your company budget.

          Purchase a used CNC lathe with LagerMaschinen

          LagerMaschinen has developed several features in the last few years designed to optimize your purchasing experience. Its online platform cross-references used machines based on location specifications and price. Communicate with current owners and experts in your field to find the best used CNC lathes for your business needs. Additionally LagerMaschinen's delivery and installation services will save you time money and frustration. LagerMaschinen prides itself on providing a practical and affordable business solution for businesses that need to find reliable used machinery. Find the perfect used CNC lathes today with LagerMaschinen.