,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Lathes

          Machinelist: Lathes


          Center Lathe

          used Lathes Center Lathe TOS SV 18R


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-122 · Center Lathe

          TOS - SV 18R - - 1959 -

          Technical details
          turning diameter over bed 380 mm︱turning diameter over slide rest 215 mm︱turning length 1000 mm︱total power requirement kW︱weight of the machine ca. 1800 kg︱dimensions of the machine ca. 2,7 x 1,2 x 1 m︱
            turning diameter over bed 380 mm
            turning diameter over slide rest 215 mm
            turning length 1000 mm
            weight of the machine ca. 1800 kg
            dimensions of the machine ca. 2,7 x 1,2 x 1 m


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Center Lathe CONTUR SJ-520


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28231 · Center Lathe

          CONTUR - SJ-520 - - -

          Technical details
          WORKING RANGE TURNING / ︱- swing diameter (max) 520 mm︱- turning diameter (max) 260 mm︱- worpiece length max. 1500 mm︱MAIN SPINDLE ︱- spindle bore diameter 78 mm︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 2000 /min︱- number of gears 12 ︱- spindle diameter 78 mm︱SCREW CUTTING SPINDLE ︱- advance z-axis (min.) 0.05 mm/r︱- advance z-axis (max.) 0.82 mm/r︱- advance x-axis (min.) 0.02 mm/r︱- advance x-axis (max.) 0.4 mm/r︱- pitch of spindle 6 mm︱TAILSTOCK ︱- sleeve diameter 68 mm︱- taper: MK 4 ︱ELECTRICAL SPECIFICATIONS
            WORKING RANGE TURNING /
            - swing diameter (max) 520 mm
            - turning diameter (max) 260 mm
            - worpiece length max. 1500 mm
            - spindle bore diameter 78 mm
            - spindle revolutions (min) 20 /min
            - spindle revolutions (max) 2000 /min
            - number of gears 12
            - spindle diameter 78 mm
            - advance z-axis (min.) 0.05 mm/r
            - advance z-axis (max.) 0.82 mm/r
            - advance x-axis (min.) 0.02 mm/r
            - advance x-axis (max.) 0.4 mm/r
            - pitch of spindle 6 mm
            - sleeve diameter 68 mm


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Center Lathe CONTUR SJ-760


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28885 · Center Lathe

          CONTUR - SJ-760 - - -

          Technical details
          turning diameter over bed 760 mm︱turning diameter over slide rest 540 mm︱turning length / mm︱ / 760 mm︱ 540 mm︱ 115 mm︱ 10 /min︱ 1000 /min︱ 12 11 kW︱ 0.05 mm/r︱ 0.82 mm/r︱ 0.02 mm/r︱ 0.4 mm/r︱ 32 85 mm︱
            turning diameter over bed 760 mm
            turning diameter over slide rest 540 mm
            turning length / mm
            /
            760 mm
            540 mm
            115 mm
            10 /min
            1000 /min
            12
            11 kW
            0.05 mm/r
            0.82 mm/r
            0.02 mm/r
            0.4 mm/r
            32
            85 mm


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Center Lathe CONTUR SJ-660


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28884 · Center Lathe

          CONTUR - SJ-660 - - -

          Technical details
          turning diameter over bed 660 mm︱turning diameter over slide rest 438 mm︱turning length / mm︱ 660 mm︱ 438 mm︱ 85 mm︱ 15 /min︱ 1500 /min︱ 12 11 kW︱ 0.05 mm/r︱ 0.82 mm/r︱ 0.02 mm/r︱ 0.4 mm/r︱ 32 85 mm︱
            turning diameter over bed 660 mm
            turning diameter over slide rest 438 mm
            turning length / mm
            660 mm
            438 mm
            85 mm
            15 /min
            1500 /min
            12
            11 kW
            0.05 mm/r
            0.82 mm/r
            0.02 mm/r
            0.4 mm/r
            32
            85 mm


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Center Lathe CONTUR SJ-430


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28229 · Center Lathe

          CONTUR - SJ-430 - - -

          Technical details
          turning diameter over bed 430 mm︱turning diameter over slide rest 215 mm︱turning length 760 mm︱ 430 mm︱ 215 mm︱ 58 mm︱ 20 /min︱ 2000 /min︱ 12 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter over bed 430 mm
            turning diameter over slide rest 215 mm
            turning length 760 mm
            430 mm
            215 mm
            58 mm
            20 /min
            2000 /min
            12


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Center Lathe CONTUR SJ-470


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28230 · Center Lathe

          CONTUR - SJ-470 - - -

          Technical details
          WORKING RANGE TURNING ︱- swing diameter (max) 470 mm︱- turning diameter (max) 235 mm︱- worpiece length max. 1000 mm︱BED GAP / BRIDGE ︱- swing in gap 690 mm︱MAIN SPINDLE ︱- spindle bore diameter 58 mm︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 2000 /min︱- number of gears 12 ︱- spindle diameter 58 mm︱SCREW CUTTING SPINDLE ︱- advance z-axis (min.) 0.05 mm/r︱- advance z-axis (max.) 0.82 mm/r︱- advance x-axis (min.) 0.02 mm/r︱- advance x-axis (max.) 0.4 mm/r︱TAILSTOCK ︱- taper: MK 4 ︱ELECTRICAL SPECIFICATIONS
          << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>> The machine is available with peak widths from 760mm to 2000mm. This offer is a storage machine at a promotional price (Original price incl. These options: 28962.- ) We will send you a non-binding offer with your desired specifications. -> Description as well as standard and special equipment can be found in the PDF file. This storage machine is equipped as follows: Including the following standard accessories, u. a .: - 3-way precision spindle with SKF (FAG) bearings - Spindle brake mechanically - Complete electrical equipment - Coolant device with rear splash guard and splash guard on the slide - Food protection - Shift rod with 3 adjustable cams - Solid grain tip - Covered tension spindle - Set of machine mounting plates - Machine lamp 24 V - Operating instructions with test report - CE conformity declaration Incl. Special accessories, u. a .: Article no. 5200 B Steel holder head B, type Multifix (without tool holder) Article no. 6405 DA3A-470-1000 Digital Position Indicator ARBAH (Made in EU) 1 for SJ-470 / 1000S, including counter, 3 scales, Stands, covers and mounting Article no. 5300 3544-250-6 3 jaw lathe chucks BISON, steel body Ø 250 mm, Camlock D-6, concentric clamping, bore Ø 76 mm each with a set of one-piece turning and drilling jaws
            - swing diameter (max) 470 mm
            - turning diameter (max) 235 mm
            - worpiece length max. 1000 mm
            - swing in gap 690 mm
            - spindle bore diameter 58 mm
            - spindle revolutions (min) 20 /min
            - spindle revolutions (max) 2000 /min
            - number of gears 12
            - spindle diameter 58 mm
            - advance z-axis (min.) 0.05 mm/r
            - advance z-axis (max.) 0.82 mm/r
            - advance x-axis (min.) 0.02 mm/r
            - advance x-axis (max.) 0.4 mm/r
            Description :
            << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>>
            The machine is available with peak widths from 760mm to 2000mm.
            This offer is a storage machine at a promotional price
            (Original price incl. These options: 28962.- )

            We will send you a non-binding offer with your desired specifications.
            -> Description as well as standard and special equipment can be found in the PDF file.

            This storage machine is equipped as follows:
            Including the following standard accessories, u. a .:
            - 3-way precision spindle with SKF (FAG) bearings
            - Spindle brake mechanically
            - Complete electrical equipment
            - Coolant device with rear splash guard
            and splash guard on the slide
            - Food protection
            - Shift rod with 3 adjustable cams
            - Solid grain tip
            - Covered tension spindle
            - Set of machine mounting plates
            - Machine lamp 24 V
            - Operating instructions with test report
            - CE conformity declaration

            Incl. Special accessories, u. a .:
            Article no. 5200 B
            Steel holder head B, type Multifix
            (without tool holder)

            Article no. 6405 DA3A-470-1000
            Digital Position Indicator ARBAH (Made in EU) 1
            for SJ-470 / 1000S, including counter, 3 scales,
            Stands, covers and mounting

            Article no. 5300 3544-250-6
            3 jaw lathe chucks BISON, steel body Ø 250 mm,
            Camlock D-6, concentric clamping, bore Ø 76 mm
            each with a set of one-piece turning and drilling jaws


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center FAT FCT-700


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-163 · CNC Turning- and Milling Center

          FAT - FCT-700 - - 2005 - SIEMEMS 840 D Shop Turn

          Technical details
          turning diameter 700 mm︱turning length 2100 mm︱control SIEMEMS 840 D Shop Turn ︱feed 0-20 m/min︱spindle turning speed - stepless 2000 U/min︱c-axis Ja ︱turret (x-stations) 12 ︱speeds of tool U/min︱turning diameter over slide 490 mm︱tailstock quill taper MT 5 ︱dia. of quill 120 mm︱quill stroke 100 mm︱spindle bore 140 mm︱total power requirement kW︱weight of the machine ca. 13 t︱dimensions of the machine ca. 5,4 x 2,3 x 2,5 m︱
          This FAT Haco FCT-700 CNC lathe is in very good condition and available immediately.
            turning diameter 700 mm
            turning length 2100 mm
            control SIEMEMS 840 D Shop Turn
            feed 0-20 m/min
            spindle turning speed - stepless 2000 U/min
            c-axis Ja
            turret (x-stations) 12
            turning diameter over slide 490 mm
            tailstock quill taper MT 5
            dia. of quill 120 mm
            quill stroke 100 mm
            spindle bore 140 mm
            weight of the machine ca. 13 t
            dimensions of the machine ca. 5,4 x 2,3 x 2,5 m
            Description :
            This FAT Haco FCT-700 CNC lathe is in very good condition and available
            immediately.


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled EMCO E 300-2000


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-160 · Lathe - cycle-controlled

          EMCO - E 300-2000 - - 2000 - FAGOR 8055

          Technical details
          turning diameter 340 mm︱turning length 2000 mm︱control FAGOR 8055 ︱swing diameter 550 mm︱spindle bore 108 mm︱spindle turning speed - stepless 2500 U/min︱power capacity 16.5 kW︱quill stroke 220 mm︱diameter of quill 100 mm︱total power requirement 19 kW︱weight of the machine ca. 4300 kg︱dimensions of the machine ca. 4300 x 1600 x 1800 m︱
          This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders
            turning diameter 340 mm
            turning length 2000 mm
            control FAGOR 8055
            swing diameter 550 mm
            spindle bore 108 mm
            spindle turning speed - stepless 2500 U/min
            power capacity 16.5 kW
            quill stroke 220 mm
            diameter of quill 100 mm
            total power requirement 19 kW
            weight of the machine ca. 4300 kg
            dimensions of the machine ca. 4300 x 1600 x 1800 m
            Description :
            This EMCO E 300x2000 cycle lathe is supplied complete with all accessories.
            Description:
            - Coolant device
            - 1 piece Luenette open 20-145mm
            - 1 piece closed guide 15-185mm
            - 1 piece face plate
            - 1 piece three-jaw chuck
            - 1 piece wedge bar chuck D=400mm
            - Parat 4-fold tool holder
            - Various tool holders


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled BOEHRINGER DUS 560x1500


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-106 · Lathe - cycle-controlled

          BOEHRINGER - DUS 560x1500 - - 1996 - SIEMENS 810D

          Technical details
          turning diameter 560 mm︱turning length 1500 mm︱control SIEMENS 810D ︱taper in tailstock-quill MK 5 ︱turning speeds 2500 U/min︱spindle bore 62 mm︱total power requirement 19 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 3,8 x 1,8 x 1,9 m︱
          This BOEHRINGER DUS 560 is in very good condition
            turning diameter 560 mm
            turning length 1500 mm
            control SIEMENS 810D
            taper in tailstock-quill MK 5
            turning speeds 2500 U/min
            spindle bore 62 mm
            total power requirement 19 kW
            weight of the machine ca. 4 t
            dimensions of the machine ca. 3,8 x 1,8 x 1,9 m
            Description :
            This BOEHRINGER DUS 560 is in very good condition


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled CONTUR DIALOG H-66


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-8360 · Lathe - cycle-controlled

          CONTUR - DIALOG H-66 - - - SIEMENS 840 D + SHOPTURN

          Technical details
          turning diameter 660 mm︱turning length / mm︱control SIEMENS 840 D + SHOPTURN 660 mm︱ 400 mm︱ 105 mm︱ 2 /min︱ 2500 /min︱ 2 18.8 kW︱ 21000 Nm︱ 5 mm/min︱ 3200 mm/min︱ 5 mm/min︱ 3200 mm/min︱ 8000 mm/min︱ 8000 mm/min︱
            turning diameter 660 mm
            turning length / mm
            control SIEMENS 840 D + SHOPTURN
            660 mm
            400 mm
            105 mm
            2 /min
            2500 /min
            2
            18.8 kW
            21000 Nm
            5 mm/min
            3200 mm/min
            5 mm/min
            3200 mm/min
            8000 mm/min
            8000 mm/min


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used Lathes Turning Automatic Lathe - swiss lathe STAR ECAS 32T


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-110 · Turning Automatic Lathe - swiss lathe

          STAR - ECAS 32T - - 2008 - YASKAWA SIEMENS 840 DI V2

          Technical details
          turning diameter over bed 32 mm︱spindle passage 32 mm︱turning length 125 mm︱Control YASKAWA SIEMENS 840 DI V2 ︱clamping diameter 32 mm︱spindle turning speed range 7000 U/min︱workpiece length - max. 150 mm︱feed 0 - 2000 mm/min︱total power requirement kW︱weight of the machine ca. 5,7 t︱dimensions of the machine ca. 10,5 x 2 x 1,9 m︱
          The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available << The bar feeder automatically fills the bars to the bar magazine. The bar magazine is an FMB turbo 3-36. The machine has 11 axes: X1, X2, X3 Y1, Y2, Y3 Z1, Z2, Z3 C1, C2
            turning diameter over bed 32 mm
            spindle passage 32 mm
            turning length 125 mm
            Control YASKAWA SIEMENS 840 DI V2
            clamping diameter 32 mm
            spindle turning speed range 7000 U/min
            workpiece length - max. 150 mm
            feed 0 - 2000 mm/min
            weight of the machine ca. 5,7 t
            dimensions of the machine ca. 10,5 x 2 x 1,9 m
            Description :
            The sliding headstock automatic lathe is in good condition and ready for
            immediate use.
            with tool holders and spare parts.
            >> Two identical STAR 32T sliding headstock lathes are available <<
            The bar feeder automatically fills the bars to the bar magazine.
            The bar magazine is an FMB turbo 3-36.
            The machine has 11 axes:
            X1, X2, X3
            Y1, Y2, Y3
            Z1, Z2, Z3
            C1, C2


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Turning Automatic Lathe - swiss lathe STAR ECAS 32T


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-109 · Turning Automatic Lathe - swiss lathe

          STAR - ECAS 32T - - 2007 - YASKAWA SIEMENS 840 DI V2

          Technical details
          turning diameter over bed 32 mm︱spindle passage 32 mm︱turning length 125 mm︱Control YASKAWA SIEMENS 840 DI V2 ︱spindle turning speed range 7000 U/min︱workpiece length - max. 150 mm︱clamping diameter 32 mm︱feed 0 - 2000 mm/min︱total power requirement kW︱weight of the machine ca. 5,7 t︱dimensions of the machine ca. 10,5 x 2 x 1,9 m︱
          The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available << The bar feeder automatically fills the bars to the bar magazine. The bar magazine is an FMB turbo 3-36. The machine has 11 axes: X1, X2, X3 Y1, Y2, Y3 Z1, Z2, Z3 C1, C2
            turning diameter over bed 32 mm
            spindle passage 32 mm
            turning length 125 mm
            Control YASKAWA SIEMENS 840 DI V2
            spindle turning speed range 7000 U/min
            workpiece length - max. 150 mm
            clamping diameter 32 mm
            feed 0 - 2000 mm/min
            weight of the machine ca. 5,7 t
            dimensions of the machine ca. 10,5 x 2 x 1,9 m
            Description :
            The sliding headstock automatic lathe is in good condition and ready for
            immediate use.
            with tool holders and spare parts.
            >> Two identical STAR 32T sliding headstock lathes are available <<
            The bar feeder automatically fills the bars to the bar magazine.
            The bar magazine is an FMB turbo 3-36.
            The machine has 11 axes:
            X1, X2, X3
            Y1, Y2, Y3
            Z1, Z2, Z3
            C1, C2


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Turning Automatic Lathe - swiss lathe TRAUB TNK 36


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-38209 · Turning Automatic Lathe - swiss lathe

          TRAUB - TNK 36 - - 2002 -

          Technical details
          turning diameter over bed / mm︱spindle passage 36 mm︱turning length 100 mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 2 ︱- - counter spindle: yes ︱- number of turrets 1 ︱- live positions: yes ︱- number of c-axes 2 ︱- number of y-axes 2 ︱WORKING RANGE TURNING ︱- bar diameter (max) 36 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 6300 /min︱- drive power S6 40% 10.7 kW︱COUNTER SPINDLE ︱- spindle revolutions (max) 6300 /min︱ELECTRICAL SPECIFICATIONS ︱- mains voltage 400 V︱
            turning diameter over bed / mm
            spindle passage 36 mm
            turning length 100 mm
            - number of spindles 2
            - number of turrets 1
            - number of c-axes 2
            - number of y-axes 2
            - bar diameter (max) 36 mm
            - spindle revolutions (min) 6300 /min
            - drive power S6 40% 10.7 kW
            - spindle revolutions (max) 6300 /min
            - mains voltage 400 V


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Turning Automatic Lathe - swiss lathe TRAUB TNK 28


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-38259 · Turning Automatic Lathe - swiss lathe

          TRAUB - TNK 28 - - 1999 -

          Technical details
          turning diameter over bed / mm︱spindle passage 28 mm︱turning length 100 mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of turrets 2 ︱- live positions: yes ︱WORKING RANGE TURNING ︱- turning diameter (max) 28 mm︱- bar diameter (max) 28 mm︱- worpiece length max. 3000 mm︱MAIN SPINDLE ︱- c-axis: yes ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2600 mm︱- space requirements -front/back- 2400 mm︱- total height 1700 mm︱ATTACHMENTS (TURNING) ︱- - bar length (max) 3000 mm︱- - bar diameter (max) 28 mm︱
            turning diameter over bed / mm
            spindle passage 28 mm
            turning length 100 mm
            - number of turrets 2
            - turning diameter (max) 28 mm
            - bar diameter (max) 28 mm
            - worpiece length max. 3000 mm
            - space requirements -left/right. 2600 mm
            - space requirements -front/back. 2400 mm
            - total height 1700 mm
            - - bar length (max) 3000 mm
            - - bar diameter (max) 28 mm


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.