Lathes

Machinelist: Lathes

Center Lathe

SK Maschinen-Service GmbH
Tackweg 4
47918 Tönisvorst
Deutschland

02151 79350
02151 793535
info@sk-maschinen.de
www.sk-maschinen.de

#1038-80468 · Center Lathe

SKODA - SIU 315 - - 1973/2008 - CNC Siemens 840D

Technical details

turning diameter over bed 3.150 mm︱turning diameter over slide rest 2.650 mm︱turning length 15.000 mm︱Control CNC Siemens 840D ︱workpiece weight 160 t︱number of spindle speeds 4 Bereiche – von 0,25 bis ︱

Pictures from location. Machine is now in warehouse in dismantled condition. See last picture. 8 steadies

turning diameter over bed 3.150 mm

turning diameter over slide rest 2.650 mm

turning length 15.000 mm

Control CNC Siemens 840D

workpiece weight 160 t

number of spindle speeds 4 Bereiche – von 0,25 bis

Description :

Pictures from location. Machine is now in warehouse in dismantled condition.
See last picture.

8 steadies

Datasheet

CNC Lathe

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-202274 · CNC Lathe

DMG GILDEMEISTER - MSL 60/7 - - 2015 - Fanuc 31 i

Technical details

Axis: 7 ︱Control Fanuc 31 i ︱main spindle: ︱max. rod diameter 60 mm︱max. turning speeds 5000 min/-1︱spindle motor 7,5/5,5 kW︱sub spindle: ︱max. turning diameter 42 mm︱max. turning speeds 5000 min/-1︱spindle motor 3,7/2,2 kW︱Axis: ︱max speed (Z4) 15 m/min︱max. acceleration 5 m/s2︱travel X1 / X2 / X3 60 mm︱travel X4 130 mm︱travel Z2 80 mm︱tavel Z3 80 mm︱travel Z4 340 mm︱Nominal thrust X1 / X2 / X3 / X4 / Z2 /Z3 / Z4 4400 N︱Tool holder slide 1: ︱

In our assessment, the machine is in a very good used condition State and can be viewed by appointment. - Bar loader, usable length 5m *** Changes and errors in the technical data and information, as well Subject to prior sale! ***

Axis: 7

Control Fanuc 31 i

max. rod diameter 60 mm

max. turning speeds 5000 min/-1

spindle motor 7,5/5,5 kW

max. turning diameter 42 mm

max. turning speeds 5000 min/-1

spindle motor 3,7/2,2 kW

max speed (Z4) 15 m/min

max. acceleration 5 m/s2

travel X1 / X2 / X3 60 mm

travel X4 130 mm

travel Z2 80 mm

tavel Z3 80 mm

travel Z4 340 mm

Nominal thrust X1 / X2 / X3 / X4. 4400 N

Description :

In our assessment, the machine is in a very good used condition
State and can be viewed by appointment.

- Bar loader, usable length 5m

*** Changes and errors in the technical data and information, as well
Subject to prior sale! ***

Datasheet

used Lathes CNC Lathe DMG GILDEMEISTER NEF 400

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2023250 · CNC Lathe

DMG GILDEMEISTER - NEF 400 - - 2010 - Siemens 840D

Technical details

turning diameter 350 mm︱turning length 650 mm︱control Siemens 840D ︱turning diameter over bed 385 mm︱main spindle: ︱turning speed range - main spindle 0 - 4.000 min/-1︱max. torque 340 Nm︱tool turret: ︱number of tool places 12 Pos.︱tool adaptor VDI 30 ︱travel: ︱x-axis 255 mm︱z-axis 800 mm︱total power requirement 21 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 5 x 2,5 x 2 m︱

In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. Technical features: - Operating hours: approx. 23,000 hours - Spindle hours: approx. 10,000h ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

turning diameter 350 mm

turning length 650 mm

control Siemens 840D

turning diameter over bed 385 mm

turning speed range - main spind. 0 - 4.000 min/-1

max. torque 340 Nm

number of tool places 12 Pos.

tool adaptor VDI 30

x-axis 255 mm

z-axis 800 mm

total power requirement 21 kW

weight of the machine ca. 3,3 t

dimensions of the machine ca. 5 x 2,5 x 2 m

Description :

In our opinion, the machine is in good used condition
Condition and can be viewed under power by appointment.

Technical features:
- Operating hours: approx. 23,000 hours
- Spindle hours: approx. 10,000h

***Accessories, tools and clamping devices shown are only included in the scope
of delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2024037 · CNC Lathe

DOOSAN - G 220 - - 2001 - Fanuc Series 21-T

Technical details

turning diameter 350 mm︱turning length 280 mm︱control Fanuc Series 21-T ︱x-travel 400 mm︱z-travel 280 mm︱turning speeds 60 - 6.000 U/min︱bar material dia. 40 mm︱table surface area 220 x 700 mm︱total power requirement 18 kW︱weight of the machine ca. 2,35 t︱

turning diameter 350 mm

turning length 280 mm

control Fanuc Series 21-T

x-travel 400 mm

z-travel 280 mm

turning speeds 60 - 6.000 U/min

bar material dia. 40 mm

table surface area 220 x 700 mm

total power requirement 18 kW

weight of the machine ca. 2,35 t

Datasheet

used Lathes CNC Lathe NILES-SIMMONS N20/1000

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2024017 · CNC Lathe

NILES-SIMMONS - N20/1000 - - 2000 - Rexroth Indramat BVT 20

Technical details

swing diameter 650 mm︱turning length 1000 mm︱control Rexroth Indramat BVT 20 ︱x-travel -15 / 660 mm︱y-travel -150 / 200 mm︱main spindle: 150 ︱spindle bore 92 mm︱bearing diameter 150 mm︱turning speed range - main spindle 0 - 3.800 min/-1︱tool turret: ︱number of tool places 12 Pos.︱total power requirement 70 kW︱

In our opinion, the machine is in very good used condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

swing diameter 650 mm

turning length 1000 mm

control Rexroth Indramat BVT 20

x-travel -15 / 660 mm

y-travel -150 / 200 mm

main spindle: 150

spindle bore 92 mm

bearing diameter 150 mm

turning speed range - main spind. 0 - 3.800 min/-1

number of tool places 12 Pos.

total power requirement 70 kW

Description :

In our opinion, the machine is in very good used condition and can be inspected
under power by appointment.

***Accessories, tools and clamping devices shown are only included in the scope
of delivery if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-202217 · CNC Lathe

OKUMA - LT 15 M - - 1998 - Okuma OSP 7000 L

Technical details

turning diameter 550 mm︱turning length 900 mm︱control Okuma OSP 7000 L ︱turning diameter over bed 550 mm︱turning diameter over cross slideways 150 mm︱centre distance max. 1174 mm︱main spindle: ︱turning speed range - main spindle 45-4500 min/-1︱drive capacity - main spindle 15 kW︱tool turret: ︱number of tool places 2x12 Pos.︱Drill shank diameter 40 mm︱travel: ︱x-axis 230 mm︱z-axis 900 mm︱feeds: ︱rapid traverse 20x24 m/min︱weight of the machine ca. 8,2 t︱

In our estimation, the machine is in very good condition and can be viewed live by appointment. Technical features: - Double spindle lathe - Traverse paths: x1: 230mm : z1 460mm : x2 230mm : z2 900mm - driven tools Accesories: - chip conveyor *** Changes and errors in the technical data and information as well Subject to prior sale!***

turning diameter 550 mm

turning length 900 mm

control Okuma OSP 7000 L

turning diameter over bed 550 mm

turning diameter over cross slid. 150 mm

centre distance max. 1174 mm

turning speed range - main spind. 45-4500 min/-1

drive capacity - main spindle 15 kW

number of tool places 2x12 Pos.

Drill shank diameter 40 mm

x-axis 230 mm

z-axis 900 mm

rapid traverse 20x24 m/min

weight of the machine ca. 8,2 t

Description :

In our estimation, the machine is in very good condition
and can be viewed live by appointment.

Technical features:

- Double spindle lathe
- Traverse paths: x1: 230mm : z1 460mm : x2 230mm : z2 900mm
- driven tools

Accesories:

- chip conveyor

*** Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2023068 · CNC Lathe

INDEX - ABC - - 1995 - Siemens Sinumerik

Technical details

turning diameter 52 mm︱turning length 280 mm︱control Siemens Sinumerik ︱travel: ︱travel -x axis 90 mm︱travel -z axis 280 mm︱spindle tunring speed 5000 U/min︱ 6000 U/min︱rapid traverse 24 m/min︱total power requirement 18 kW︱weight of the machine ca. 2,6 t︱dimensions of the machine ca. 2,7 x 1,35 x 1,9 m︱

In our opinion, the machine is in good condition and can be inspected under power by appointment. Accesories: -Chip conveyor -Bar feeder ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

turning diameter 52 mm

turning length 280 mm

control Siemens Sinumerik

travel -x axis 90 mm

travel -z axis 280 mm

spindle tunring speed 5000 U/min

6000 U/min

rapid traverse 24 m/min

total power requirement 18 kW

weight of the machine ca. 2,6 t

dimensions of the machine ca. 2,7 x 1,35 x 1,9 m

Description :

In our opinion, the machine is in good condition and can be inspected under
power by appointment.

Accesories:
-Chip conveyor
-Bar feeder

***Accessories, tools and clamping devices shown are only part of the scope of
delivery if this is noted in the additional information.***

***Changes and errors in the technical data and information as well as
Subject to prior sale!***

Datasheet

used Lathes CNC Lathe GILDEMEISTER CTX 600

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2024053 · CNC Lathe

GILDEMEISTER - CTX 600 - - 1992 - Grundig ELTROPILOT 2.2

Technical details

spindle tunring speed 3050 U/min︱max. rod diameter 90 mm︱Max. machinable diameter 650 mm︱Number of tools in turret 12 ︱tool taper VDI 50 ︱Powered tools performance 10.4 kW︱control Grundig ELTROPILOT 2.2 ︱Number of working hours ca. 50562 h︱

In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. Technical features: - Simodrive renewed Accesories: - Coolant tank - chip conveyor ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

spindle tunring speed 3050 U/min

max. rod diameter 90 mm

Max. machinable diameter 650 mm

Number of tools in turret 12

tool taper VDI 50

Powered tools performance 10.4 kW

control Grundig ELTROPILOT 2.2

Number of working hours ca. 50562 h

Description :

In our opinion, the machine is in good used condition
Condition and can be viewed under power by appointment.

Technical features:
- Simodrive renewed

Accesories:
- Coolant tank
- chip conveyor

***Accessories, tools and clamping devices shown are only included in the scope
of delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

used Lathes CNC Lathe GILDEMEISTER NEF CT 20

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2024054 · CNC Lathe

GILDEMEISTER - NEF CT 20 - - 1988 - Grundig ELTROPILOT 2.0

Technical details

spindle tunring speed 30 - 6000 U/min︱max. rod diameter 36 mm︱Max. machinable diameter 280 mm︱turning length 250 mm︱Number of tools in turret 12 ︱tool taper VDI 20 ︱dia. of quill 50 mm︱quill stroke 120 mm︱Quill mount MK3 ︱control Grundig ELTROPILOT 2.0 ︱Number of working hours ca. 55473 h︱

In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. Accesories: - Coolant tank ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

spindle tunring speed 30 - 6000 U/min

max. rod diameter 36 mm

Max. machinable diameter 280 mm

turning length 250 mm

Number of tools in turret 12

tool taper VDI 20

dia. of quill 50 mm

quill stroke 120 mm

Quill mount MK3

control Grundig ELTROPILOT 2.0

Number of working hours ca. 55473 h

Description :

In our opinion, the machine is in good used condition
Condition and can be viewed under power by appointment.

Accesories:
- Coolant tank

***Accessories, tools and clamping devices shown are only included in the scope
of delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

used Lathes CNC Lathe RAVENSBURG KV 2 - 1000 CNC

SK Maschinen-Service GmbH
Tackweg 4
47918 Tönisvorst
Deutschland

02151 79350
02151 793535
info@sk-maschinen.de
www.sk-maschinen.de

#1038-90349 · CNC Lathe

RAVENSBURG - KV 2 - 1000 CNC - - 1986 - Siemens 8 T

Technical details

turning diameter 1400 mm︱turning length 6000 mm︱control Siemens 8 T ︱turning diameter over bed slide 1000 mm︱centre height 800 mm︱workpiece weight flying clamped 4500 Kg︱max. workpiece weight between centres 20000 kg︱workpiece weight with 2 steadies 30000 kg︱faceplate diameter 1300 mm︱faceplate turning speed range 1,4-400 U/min︱drive capacity - spindle motor 112 kW︱max. torque on the faceplate 40.000 Nm︱z-axis 6500 mm︱x-axis 700 mm︱feeds x-axis 0,05-50 mm/min︱feeds z-axis 0,05-50 mm/min︱rapid speed 6000 mm/min︱feed power in the axis x + z 35.000 N︱tailstock - quill dia 250 mm︱quill stroke 260 mm︱

1 pc open steadyrest 200-500mm, capacity 10 Tonnen 1 pc. closed steadyrest 500-1000mm, capacity 10 Tonnen 1 pc. 4-fold turret head Sauter Size 40, main cutting force 8.000 kg 1 pc. milling device FR2

turning diameter 1400 mm

turning length 6000 mm

control Siemens 8 T

turning diameter over bed slide 1000 mm

centre height 800 mm

workpiece weight flying clamped 4500 Kg

max. workpiece weight between ce. 20000 kg

workpiece weight with 2 steadies 30000 kg

faceplate diameter 1300 mm

faceplate turning speed range 1,4-400 U/min

drive capacity - spindle motor 112 kW

max. torque on the faceplate 40.000 Nm

z-axis 6500 mm

x-axis 700 mm

feeds x-axis 0,05-50 mm/min

feeds z-axis 0,05-50 mm/min

rapid speed 6000 mm/min

feed power in the axis x + z 35.000 N

tailstock - quill dia 250 mm

quill stroke 260 mm

Description :

1 pc open steadyrest 200-500mm, capacity 10 Tonnen
1 pc. closed steadyrest 500-1000mm, capacity 10 Tonnen
1 pc. 4-fold turret head Sauter Size 40, main cutting force 8.000 kg
1 pc. milling device FR2

Datasheet

Crankshaft Turning Lathe

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2023259 · Crankshaft Turning Lathe

NILES - N30 /3 TB-1500 - - 2011 - Siemens 840 D sl

Technical details

Control Siemens 840 D sl ︱max. workpiece length 800 mm︱swing diameter over slide rest 780 mm︱main spindle: ︱max. turning speeds 3000 min/-1︱spindle diameter in front bearing 180 mm︱spindle bore 92 mm︱spindle head A11 ︱tool turret: ︱tooling cassettes 2x 45 Stk.︱tool taper A11 DIN55026 ︱tool diameter 700 mm︱feeds: ︱rapid traverse 18 x 30 m/min︱weight of the machine ca. 24,0 t︱

In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

Control Siemens 840 D sl

max. workpiece length 800 mm

swing diameter over slide rest 780 mm

max. turning speeds 3000 min/-1

spindle diameter in front bearin. 180 mm

spindle bore 92 mm

spindle head A11

tooling cassettes 2x 45 Stk.

tool taper A11 DIN55026

tool diameter 700 mm

rapid traverse 18 x 30 m/min

weight of the machine ca. 24,0 t

Description :

In our opinion, the machines are in very good used condition
Condition and can be viewed under power by appointment.

Technical features:
- Nominal length: 1500 mm

Accesories:
- chip conveyor
- Felsomat loading system
- lathe chuck
- milling body

***Accessories, tools and clamping devices shown are only included in the scope
of delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

used Lathes Crankshaft Turning Lathe NILES N20 LT

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2023260 · Crankshaft Turning Lathe

NILES - N20 LT - - 1998 - Siemens 840 D

Technical details

Control Siemens 840 D ︱swing diameter over slide rest 650 mm︱main spindle: ︱max. turning speeds 3800 min/-1︱spindle diameter in front bearing 150 mm︱spindle bore 92 mm︱spindle head A8 DIN55026 ︱tool turret: ︱number of tool places 2x 12 Pos.︱tool taper VDI 40 ︱weight of the machine ca. 7,0 t︱

In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body There are 2 identical machines available. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

Control Siemens 840 D

swing diameter over slide rest 650 mm

max. turning speeds 3800 min/-1

spindle diameter in front bearin. 150 mm

spindle bore 92 mm

spindle head A8 DIN55026

number of tool places 2x 12 Pos.

tool taper VDI 40

weight of the machine ca. 7,0 t

Description :

In our opinion, the machines are in good used condition
Condition and can be viewed under power by appointment.

Technical features:
- Nominal length: 1500 mm

Accesories:
- chip conveyor
- Felsomat loading system
- lathe chuck
- milling body

There are 2 identical machines available.

***Accessories, tools and clamping devices shown are only included in the scope
of delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

Heavy Duty Lathe

SK Maschinen-Service GmbH
Tackweg 4
47918 Tönisvorst
Deutschland

02151 79350
02151 793535
info@sk-maschinen.de
www.sk-maschinen.de

#1038-20976 · Heavy Duty Lathe

SKODA - SRM 100 - - 1975 -

Technical details

turning diameter over bed 1000 mm︱turning diameter over slide rest 710 mm︱turning length 7000 mm︱max. workpiece weight between centres 10000 kg︱spindle turning speed range 1,8-400 U/min︱tailstock quill taper metric 80/1:10 ︱tailstock - quill dia 170 mm︱tailstock - travel of quill 200 mm︱Tailstock quill travel speed 2150 mm/min︱main drive motor 37 kW︱longitudinal feeds: 0,125-48 mm/U ︱face feeds 0,4 der Längsvorschübe ︱weight of the machine ca. 17 t︱dimensions of the machine ca. 11x1,9x2 m︱

machine was mechanically and electrically overhauled in the last years. - taper turning function - 3 lynettes - misc. center points for tailstock - set of change gears

turning diameter over bed 1000 mm

turning diameter over slide rest 710 mm

turning length 7000 mm

max. workpiece weight between ce. 10000 kg

spindle turning speed range 1,8-400 U/min

tailstock quill taper metric 80/1:10

tailstock - quill dia 170 mm

tailstock - travel of quill 200 mm

Tailstock quill travel speed 2150 mm/min

main drive motor 37 kW

longitudinal feeds: 0,125-48 mm/U

face feeds 0,4 der Längsvorschübe

weight of the machine ca. 17 t

dimensions of the machine ca. 11x1,9x2 m

Description :

machine was mechanically and electrically overhauled in the last years.

- taper turning function
- 3 lynettes
- misc. center points for tailstock
- set of change gears

Datasheet

Lathe - cycle-controlled

SK Maschinen-Service GmbH
Tackweg 4
47918 Tönisvorst
Deutschland

02151 79350
02151 793535
info@sk-maschinen.de
www.sk-maschinen.de

#1038-20957 · Lathe - cycle-controlled

SEIGER - SLZ800 / 1500 - - 2006 - SIEMENS SINUMERIK 810 Dpl

Technical details

turning diameter 800 mm︱turning length 1500 mm︱control SIEMENS SINUMERIK 810 Dpl ︱workpiece weight flying clamped 750 ︱workpiece weight with one steady 2200 kg︱swing diameter over face slide 540 mm︱power capacity 20/28 kW︱spindle bore 83 mm︱weight of the machine ca. 6 t︱dimensions of the machine ca. 3,5x2,8x2 m︱

gearbox must be checked!! machine without tailstock! -without tools -without jaws

turning diameter 800 mm

turning length 1500 mm

control SIEMENS SINUMERIK 810 Dpl

workpiece weight flying clamped 750

workpiece weight with one steady 2200 kg

swing diameter over face slide 540 mm

power capacity 20/28 kW

spindle bore 83 mm

weight of the machine ca. 6 t

dimensions of the machine ca. 3,5x2,8x2 m

Description :

gearbox must be checked!!
machine without tailstock!
-without tools
-without jaws

Datasheet

used Lathes Lathe - cycle-controlled WEILER E 70 x 2000

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2024038 · Lathe - cycle-controlled

WEILER - E 70 x 2000 - - 2006 -

Technical details

greates pass round over bed 720 mm︱swing over plan sled 430 mm︱centre height 360 mm︱turning length 2.000 mm︱bed width 480 mm︱adjustment of the upper slide 140 mm︱main spindle: ︱turning speeds 1.800 U/min︱Drive power 60/100% ED 37,5 / 30 kW︱spindle bore 106 mm︱

In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. The machine will be available from July 2024. Technical features: - Three-jaw chuck - Ready steel holder - DFX data import - Coolant device ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

greates pass round over bed 720 mm

swing over plan sled 430 mm

centre height 360 mm

turning length 2.000 mm

bed width 480 mm

adjustment of the upper slide 140 mm

turning speeds 1.800 U/min

Drive power 60/100% ED 37,5 / 30 kW

spindle bore 106 mm

Description :

In our opinion, the machine is in good used condition
Condition and can be viewed under power by appointment.

The machine will be available from July 2024.

Technical features:
- Three-jaw chuck
- Ready steel holder
- DFX data import
- Coolant device

***Accessories, tools and clamping devices shown are only included in the scope
of delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

used Lathes Lathe - cycle-controlled GILDEMEISTER NEF 520

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2024044 · Lathe - cycle-controlled

GILDEMEISTER - NEF 520 - - 2001 - Heidenhain MANUALplus

Technical details

turning length 1000 mm︱control Heidenhain MANUALplus ︱greates pass round over bed 500 mm︱swing diameter over face slide 290 mm︱main spindle: ︱turning speed range - main spindle 8 - 3000 min/-1︱transmission ratio 2 ︱drive capacity - main spindle 12 kW︱max. torque 920 Nm︱chucking diameter 250 mm︱spindle bore 70 mm︱travel: ︱radial face slide travel 260 mm︱tail stock: ︱diameter of quill 80 mm︱tailstock taper MK 5 ︱quill stroke 180 mm︱feeds: ︱feed speeds x/z 5000 mm/min︱rapid traverse x 8 / z 10 m/min︱

In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Tailstock - 6-fold revolver - KSS, capacity 100 liters ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

turning length 1000 mm

control Heidenhain MANUALplus

greates pass round over bed 500 mm

swing diameter over face slide 290 mm

turning speed range - main spind. 8 - 3000 min/-1

transmission ratio 2

drive capacity - main spindle 12 kW

max. torque 920 Nm

chucking diameter 250 mm

spindle bore 70 mm

radial face slide travel 260 mm

diameter of quill 80 mm

tailstock taper MK 5

quill stroke 180 mm

feed speeds x/z 5000 mm/min

rapid traverse x 8 / z 10 m/min

Description :

In our opinion, the machines are in good used condition
Condition and can be viewed under power by appointment.

Technical features:
- Tailstock
- 6-fold revolver
- KSS, capacity 100 liters

***Accessories, tools and clamping devices shown are only included in the scope
of delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

lathe-conventional-electronic

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2023174 · lathe-conventional-electronic

SCHAUBLIN - 102 - - 1957 -

Technical details

turning diameter 200 mm︱centre height 102 mm︱centre distance 470 mm︱

In our opinion, the machine is in good used condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

turning diameter 200 mm

centre height 102 mm

centre distance 470 mm

Description :

In our opinion, the machine is in good used condition and can be inspected
under power by appointment.

***Accessories, tools and clamping devices shown are only part of the scope of
delivery if this is noted in the additional information.***

***Changes and errors in the technical data and information as well as Subject
to prior sale!***

Datasheet

Turning Automatic Lathe - swiss lathe

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-202261 · Turning Automatic Lathe - swiss lathe

DMG GILDEMEISTER - MSL 60-7 - - 2008 - Fanuc

Technical details

Axis 7 ︱control Fanuc ︱main spindle: ︱turning diameter 60 mm︱spindle tunring speed 5000 U/min︱spindle motor 7,5/5,5 kW︱sub spindle: ︱max. turning diameter 42 mm︱max. turning speeds 5000 min/-1︱spindle motor 3,7/2,2 kW︱Axis: ︱max speed (Z4) 15 m/min︱max. acceleration 5 m/s2︱travel X1 / X2 / X3 60 mm︱travel X4 130 mm︱travel Z2 80 mm︱tavel Z3 80 mm︱travel Z4 340 mm︱Nominal thrust X1 / X2 / X3 / X4 / Z2 /Z3 / Z4 4400 N︱Tool holder slide 1: ︱

In our assessment, the machine is in a very good used condition State and can be viewed by appointment. - Bar feeder interface - chip conveyor *** Changes and errors in the technical data and information, as well Subject to prior sale! ***

Axis 7

control Fanuc

turning diameter 60 mm

spindle tunring speed 5000 U/min

spindle motor 7,5/5,5 kW

max. turning diameter 42 mm

max. turning speeds 5000 min/-1

spindle motor 3,7/2,2 kW

max speed (Z4) 15 m/min

max. acceleration 5 m/s2

travel X1 / X2 / X3 60 mm

travel X4 130 mm

travel Z2 80 mm

tavel Z3 80 mm

travel Z4 340 mm

Nominal thrust X1 / X2 / X3 / X4. 4400 N

Description :

In our assessment, the machine is in a very good used condition
State and can be viewed by appointment.

- Bar feeder interface
- chip conveyor

*** Changes and errors in the technical data and information, as well
Subject to prior sale! ***

Datasheet

Vertical Turning Machine

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2022033 · Vertical Turning Machine

EMAG - VL 7 - - 2014 - Siemens 840DSL

Technical details

Control Siemens 840DSL ︱max. swing diameter 420 mm︱max. turning height 300 mm︱main spindle: ︱max. turning speeds 3400 min/-1︱drive capacity - main spindle 45 / 35 kW︱max. torque 775 / 600 Nm︱chucking diameter 315 / 400 mm︱tool turret: ︱number of tool places 12 Pos.︱Shank diameter 40 mm︱travel: ︱x-axis 850 mm︱z-axis 315 mm︱feeds: ︱rapid traverse (x/z) 45 / 30 m/min︱weight of the machine ca. 10,0 t︱dimensions of the machine ca. 4,2 x 1,5 x 3,5 m︱

In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - driven tools - c-axis - Capacity for pieces diameter 30 to 160 mm : 32 [pos] - Capacity for pieces diameter 120 to 220 mm : 24 [pos] - Capacity for pieces diameter 120 to 340 mm : 16 [pos] The scope of delivery of the machine does not include a clamping device. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

Control Siemens 840DSL

max. swing diameter 420 mm

max. turning height 300 mm

max. turning speeds 3400 min/-1

drive capacity - main spindle 45 / 35 kW

max. torque 775 / 600 Nm

chucking diameter 315 / 400 mm

number of tool places 12 Pos.

Shank diameter 40 mm

x-axis 850 mm

z-axis 315 mm

rapid traverse (x/z) 45 / 30 m/min

weight of the machine ca. 10,0 t

dimensions of the machine ca. 4,2 x 1,5 x 3,5 m

Description :

In our opinion, the machine is in very good used condition
and can be inspected under power by appointment.

Technical features:
- driven tools
- c-axis
- Capacity for pieces diameter 30 to 160 mm : 32 [pos]
- Capacity for pieces diameter 120 to 220 mm : 24 [pos]
- Capacity for pieces diameter 120 to 340 mm : 16 [pos]

The scope of delivery of the machine does not include a clamping device.

***Accessories, tools and clamping devices shown are only part of the scope of
delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well as
Subject to prior sale!***

Datasheet

used Lathes Vertical Turning Machine EMAG VTC 250 DUO

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2023026 · Vertical Turning Machine

EMAG - VTC 250 DUO - - 2012 - Siemens 840 SL

Technical details

turning diameter 140 mm︱turning length 630 mm︱control Siemens 840 SL ︱max. swing diameter over bed 250 mm︱main spindle: ︱turning speed range - main spindle 0 - 5000 min/-1︱max. torque 256 Nm︱spindle bearing diameter 110 mm︱spindle bore 52 mm︱spindle head Gr. 6 DIN 55026 ︱chucking diameter max. 250 mm︱tool turret: ︱number of tool places 3 x 12 Pos.︱tool taper VDI 40 ︱max. tool weight 20 kg︱max. tool diameter 40 mm︱max. tool length 95 mm︱max. workpiece weight 20 kg︱max. workpiece diameter 140 mm︱travel: ︱

In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Siemens S120 drive systems - 3x turret, all places AGW, 2x of them with y - axis - 2x main spindle, 1x with tailstock - Spindles total 5 pcs. - Tool monitoring, Artis - Total electronic axes: 21 pcs. Accesories: - chip conveyor - Radio probe, Renishaw - Cooling unit - Infeed and outfeed conveyor - suction There are 2 identical machines available. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

turning diameter 140 mm

turning length 630 mm

control Siemens 840 SL

max. swing diameter over bed 250 mm

turning speed range - main spind. 0 - 5000 min/-1

max. torque 256 Nm

spindle bearing diameter 110 mm

spindle bore 52 mm

spindle head Gr. 6 DIN 55026

chucking diameter max. 250 mm

number of tool places 3 x 12 Pos.

tool taper VDI 40

max. tool weight 20 kg

max. tool diameter 40 mm

max. tool length 95 mm

max. workpiece weight 20 kg

max. workpiece diameter 140 mm

Description :

In our opinion, the machine is in good used condition and can be inspected
under power by appointment.

Technical features:
- Siemens S120 drive systems
- 3x turret, all places AGW, 2x of them with y - axis
- 2x main spindle, 1x with tailstock
- Spindles total 5 pcs.
- Tool monitoring, Artis
- Total electronic axes: 21 pcs.

Accesories:
- chip conveyor
- Radio probe, Renishaw
- Cooling unit
- Infeed and outfeed conveyor
- suction

There are 2 identical machines available.

***Accessories, tools and clamping devices shown are only part of the scope of
delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well as
Subject to prior sale!***

Datasheet

used Lathes Vertical Turning Machine FELSOMAT FTC180

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2023040 · Vertical Turning Machine

FELSOMAT - FTC180 - - 2012 - Siemens

Technical details

turning diameter 320 mm︱turning height 750 mm︱Control Siemens ︱main spindle: ︱max. turning speeds 4500 min/-1︱drive capacity - main spindle 26,8 / 20,9 kW︱max. torque 256 / 200 Nm︱spindle bore 52 mm︱spindle head KK A6 (DIN 55026) ︱chucking diameter max. 315 mm︱tool turret: ︱number of tool places 8 Pos.︱tool taper Capto C5 ︱max. workpiece diameter 50 mm︱max. workpiece weight 0,5 kg︱travel: ︱x-axis 450 mm︱z-axis 300 mm︱feeds: ︱rapid traverse x 45 / z 40 m/min︱

In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

turning diameter 320 mm

turning height 750 mm

Control Siemens

max. turning speeds 4500 min/-1

drive capacity - main spindle 26,8 / 20,9 kW

max. torque 256 / 200 Nm

spindle bore 52 mm

spindle head KK A6 (DIN 55026)

chucking diameter max. 315 mm

number of tool places 8 Pos.

tool taper Capto C5

max. workpiece diameter 50 mm

max. workpiece weight 0,5 kg

x-axis 450 mm

z-axis 300 mm

rapid traverse x 45 / z 40 m/min

Description :

In our opinion, the machine is in very good condition
condition and can be inspected under power by appointment.

***Accessories, tools and clamping devices shown are only part of the scope of
delivery if this is noted in the additional information.***

***Changes and errors in the technical data and information as well as
Subject to prior sale!***

Datasheet

used Lathes Vertical Turning Machine DMG GILDEMEISTER CTV 160

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2023155 · Vertical Turning Machine

DMG GILDEMEISTER - CTV 160 - - 2008 - Siemens Sinumerik 840 D

Technical details

turning diameter 160 mm︱turning height 160 mm︱control Siemens Sinumerik 840 D ︱travel: ︱x-axis 575 mm︱y-axis +/- 90 mm︱z-axis 300 mm︱main spindle: ︱max. turning speeds 6000 min/-1︱drive capacity - main spindle 21 / 16 kW︱max. torque 176 Nm︱spindle head 140h5 ︱spindle diameter in front bearing 100 mm︱chucking diameter 160 (200) mm︱C-Axis 0,001 °︱total power requirement 40 kW︱weight of the machine ca. 5,3 t︱dimensions of the machine ca. 6,5 x 4,5 x 3 m︱

In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. technical features - ShopTurn ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

turning diameter 160 mm

turning height 160 mm

control Siemens Sinumerik 840 D

x-axis 575 mm

y-axis +/- 90 mm

z-axis 300 mm

max. turning speeds 6000 min/-1

drive capacity - main spindle 21 / 16 kW

max. torque 176 Nm

spindle head 140h5

spindle diameter in front bearin. 100 mm

chucking diameter 160 (200) mm

C-Axis 0,001 °

total power requirement 40 kW

weight of the machine ca. 5,3 t

dimensions of the machine ca. 6,5 x 4,5 x 3 m

Description :

In our opinion, the machine is in good used condition
Condition and can be viewed under power by appointment.

technical features
- ShopTurn

***Accessories, tools and clamping devices shown are only included in the scope
of delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

used Lathes Vertical Turning Machine EMAG VL5

SK Maschinen-Service GmbH
Tackweg 4
47918 Tönisvorst
Deutschland

02151 79350
02151 793535
info@sk-maschinen.de
www.sk-maschinen.de

#1038-20974 · Vertical Turning Machine

EMAG - VL5 - - 2001 - FANUC 18 i-T

Technical details

chucking diameter 250 mm︱swing diameter 260 mm︱travel -x axis 570 mm︱travel -z axis 200 mm︱control FANUC 18 i-T ︱Turning speeds mainspindle 4500 U/min︱numbers of positions in the tool changer 12 ︱Dimensions (L x W x H) 3.700 x 1.500 x 2.400 mm︱weight of the machine 6.500 kg︱main drive motor 15 kW︱turret 12 station VDI 40 ︱

machine is equipped with a closed standard autom. loader: for 12 workpieces 80 mm-220 mm for 14 workpieces 30 mm-160 mm for 28 workpieces 30 mm-85 mm max. total load 120 kg

chucking diameter 250 mm

swing diameter 260 mm

travel -x axis 570 mm

travel -z axis 200 mm

control FANUC 18 i-T

Turning speeds mainspindle 4500 U/min

numbers of positions in the tool. 12

Dimensions (L x W x H) 3.700 x 1.500 x 2.400 mm

weight of the machine 6.500 kg

main drive motor 15 kW

turret 12 station VDI 40

Description :

machine is equipped with a closed standard autom. loader:
for 12 workpieces 80 mm-220 mm
for 14 workpieces 30 mm-160 mm
for 28 workpieces 30 mm-85 mm
max. total load 120 kg

Datasheet

Vertical Turret Lathe - Single Column

SK Maschinen-Service GmbH
Tackweg 4
47918 Tönisvorst
Deutschland

02151 79350
02151 793535
info@sk-maschinen.de
www.sk-maschinen.de

#1038-20435 · Vertical Turret Lathe - Single Column

DÖRRIES - CTE 320/3400 - - 1981 - Siemens 8 T

Technical details

faceplate diameter 3200 mm︱swing diameter 5100 mm︱turning height 2505 mm︱cross rail - adjustment 1500 mm︱max. ram stroke 1250 mm︱slide adjustment 2000 mm︱control Siemens 8 T ︱tool changer 16 STK ︱table load 60 t︱faceplate turning speed range -stepless- 0,8-100 U/min︱feed 0,0 1-1000 mm/min︱rapid traverse 6000 mm/min︱drive of main spindle 75 kW︱weight of the machine ca. 70 t︱dimensions of the machine ca. 9,3 x 6,1 x 6,0 m︱

machine is in an excellent condition!! with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.

faceplate diameter 3200 mm

swing diameter 5100 mm

turning height 2505 mm

cross rail - adjustment 1500 mm

max. ram stroke 1250 mm

slide adjustment 2000 mm

control Siemens 8 T

tool changer 16 STK

table load 60 t

faceplate turning speed range -s. 0,8-100 U/min

feed 0,0 1-1000 mm/min

rapid traverse 6000 mm/min

drive of main spindle 75 kW

weight of the machine ca. 70 t

dimensions of the machine ca. 9,3 x 6,1 x 6,0 m

Description :

machine is in an excellent condition!!
with div. acessories (photos available)

machine can be equipped with latest electrics and Siemens CNC control SINUMERIK
840D sl for additional costs.

Datasheet

Find the best used lathes and more at LagerMaschinen

Lathes offer versatility and efficiency to your workshop

Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

LagerMaschinen - your home for used machines

Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

Buying used machines is a smart investment

Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.

TOP Manufacturer:

ZMM - KRAFT - GILDEMEISTER - INDEX - WEILER - MORI SEIKI - HUVEMA - COLCHESTER - MAZAK - BERNARDO -