,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Lathes

          Machinelist: Lathes


          Center Lathe

          used Lathes Center Lathe SKODA SIU 315


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80468 · Center Lathe

          SKODA - SIU 315 - - 1973/2008 - CNC Siemens 840D

          Technical details
          turning diameter over bed 3.150 mm︱turning diameter over slide rest 2.650 mm︱turning length 15.000 mm︱Control CNC Siemens 840D ︱workpiece weight 160 t︱number of spindle speeds 4 Bereiche – von 0,25 bis
          Pictures from location. Machine is now in warehouse in dismantled condition. See last picture. 8 steadies
            turning diameter over bed 3.150 mm
            turning diameter over slide rest 2.650 mm
            turning length 15.000 mm
            Control CNC Siemens 840D
            workpiece weight 160 t
            number of spindle speeds 4 Bereiche – von 0,25 bis
            Description :
            Pictures from location. Machine is now in warehouse in dismantled condition.
            See last picture.

            8 steadies


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact

          CNC Lathe

          used Lathes CNC Lathe RAVENSBURG KV 2 - 1000 CNC


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-90349 · CNC Lathe

          RAVENSBURG - KV 2 - 1000 CNC - - 1986 - Siemens 8 T

          Technical details
          turning diameter 1400 mm︱turning length 6000 mm︱control Siemens 8 T ︱turning diameter over bed slide 1000 mm︱centre height 800 mm︱workpiece weight flying clamped 4500 Kg︱max. workpiece weight between centres 20000 kg︱workpiece weight with 2 steadies 30000 kg︱faceplate diameter 1300 mm︱faceplate turning speed range 1,4-400 U/min︱drive capacity - spindle motor 112 kW︱max. torque on the faceplate 40.000 Nm︱z-axis 6500 mm︱x-axis 700 mm︱feeds x-axis 0,05-50 mm/min︱feeds z-axis 0,05-50 mm/min︱rapid speed 6000 mm/min︱feed power in the axis x + z 35.000 N︱tailstock - quill dia 250 mm︱quill stroke 260 mm︱
            turning diameter 1400 mm
            turning length 6000 mm
            control Siemens 8 T
            turning diameter over bed slide 1000 mm
            centre height 800 mm
            workpiece weight flying clamped 4500 Kg
            max. workpiece weight between ce. 20000 kg
            workpiece weight with 2 steadies 30000 kg
            faceplate diameter 1300 mm
            faceplate turning speed range 1,4-400 U/min
            drive capacity - spindle motor 112 kW
            max. torque on the faceplate 40.000 Nm
            z-axis 6500 mm
            x-axis 700 mm
            feeds x-axis 0,05-50 mm/min
            feeds z-axis 0,05-50 mm/min
            rapid speed 6000 mm/min
            feed power in the axis x + z 35.000 N
            tailstock - quill dia 250 mm
            quill stroke 260 mm


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact

          Heavy Duty Lathe

          used Lathes Heavy Duty Lathe SKODA SRM 100


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20976 · Heavy Duty Lathe

          SKODA - SRM 100 - - 1975 -

          Technical details
          turning diameter over bed 1000 mm︱turning diameter over slide rest 710 mm︱turning length 7000 mm︱max. workpiece weight between centres 10000 kg︱spindle turning speed range 1,8-400 U/min︱tailstock quill taper metric 80/1:10 ︱tailstock - quill dia 170 mm︱tailstock - travel of quill 200 mm︱Tailstock quill travel speed 2150 mm/min︱main drive motor 37 kW︱longitudinal feeds: 0,125-48 mm/U ︱face feeds 0,4 der Längsvorschübe ︱weight of the machine ca. 17 t︱dimensions of the machine ca. 11x1,9x2 m︱
          machine was mechanically and electrically overhauled in the last years. - taper turning function - 3 lynettes - misc. center points for tailstock - set of change gears
            turning diameter over bed 1000 mm
            turning diameter over slide rest 710 mm
            turning length 7000 mm
            max. workpiece weight between ce. 10000 kg
            spindle turning speed range 1,8-400 U/min
            tailstock quill taper metric 80/1:10
            tailstock - quill dia 170 mm
            tailstock - travel of quill 200 mm
            Tailstock quill travel speed 2150 mm/min
            main drive motor 37 kW
            longitudinal feeds: 0,125-48 mm/U
            face feeds 0,4 der Längsvorschübe
            weight of the machine ca. 17 t
            dimensions of the machine ca. 11x1,9x2 m
            Description :
            machine was mechanically and electrically overhauled in the last years.

            - taper turning function
            - 3 lynettes
            - misc. center points for tailstock
            - set of change gears


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled SEIGER SLZ-1200x6000


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03296 · Lathe - cycle-controlled

          SEIGER - SLZ-1200x6000 - - 2009 - Heidenhain 620

          Technical details
          turning diameter ca. 850 mm︱turning length 6000 mm︱control Heidenhain 620 ︱centre distance 6000 mm︱swing diameter over bed slide 1250 mm︱swing diameter max. over cross slide 850 mm︱radial face slide adjustment 680 mm︱spindle bore 130 mm︱main drive AC: ︱spindle capacity 100% / 60% ED 37 / 52 kW︱max. torque ca. 9000 Nm︱turning speed range 5 - 710 U/min︱feed motor AC: ︱rapid traverse X-axis 6 m/min︱rapid travel Y-axis 3 m/min︱tailstock: ︱diameter of quill 160 mm︱quill stroke 315 mm︱quill holder (inner taper) MK 6 ︱steady, closed: passage 450 mm︱
          Equipment/accessories: - face plate diameter 1200 mm - various fixators - documentation
            turning diameter ca. 850 mm
            turning length 6000 mm
            control Heidenhain 620
            centre distance 6000 mm
            swing diameter over bed slide 1250 mm
            swing diameter max. over cross s. 850 mm
            radial face slide adjustment 680 mm
            spindle bore 130 mm
            spindle capacity 100% / 60% ED 37 / 52 kW
            max. torque ca. 9000 Nm
            turning speed range 5 - 710 U/min
            rapid traverse X-axis 6 m/min
            rapid travel Y-axis 3 m/min
            diameter of quill 160 mm
            quill stroke 315 mm
            quill holder (inner taper) MK 6
            steady, closed: passage 450 mm
            Description :
            Equipment/accessories:

            - face plate diameter 1200 mm
            - various fixators
            - documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SEIGER SLZ800 / 1500


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20957 · Lathe - cycle-controlled

          SEIGER - SLZ800 / 1500 - - 2006 - SIEMENS SINUMERIK 810 Dpl

          Technical details
          turning diameter 800 mm︱turning length 1500 mm︱control SIEMENS SINUMERIK 810 Dpl ︱workpiece weight flying clamped 750 ︱workpiece weight with one steady 2200 kg︱swing diameter over face slide 540 mm︱power capacity 20/28 kW︱spindle bore 83 mm︱weight of the machine ca. 6 t︱dimensions of the machine ca. 3,5x2,8x2 m︱
          gearbox must be checked!! machine without tailstock! -without tools -without jaws
            turning diameter 800 mm
            turning length 1500 mm
            control SIEMENS SINUMERIK 810 Dpl
            workpiece weight flying clamped 750
            workpiece weight with one steady 2200 kg
            swing diameter over face slide 540 mm
            power capacity 20/28 kW
            spindle bore 83 mm
            weight of the machine ca. 6 t
            dimensions of the machine ca. 3,5x2,8x2 m
            Description :
            gearbox must be checked!!
            machine without tailstock!
            -without tools
            -without jaws


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical Turning Machine

          used Lathes Vertical Turning Machine EMAG VL5


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20974 · Vertical Turning Machine

          EMAG - VL5 - - 2001 - FANUC 18 i-T

          Technical details
          chucking diameter 250 mm︱swing diameter 260 mm︱travel -x axis 570 mm︱travel -z axis 200 mm︱control FANUC 18 i-T ︱Turning speeds mainspindle 4500 U/min︱numbers of positions in the tool changer 12 ︱Dimensions (L x W x H) 3.700 x 1.500 x 2.400 mm︱weight of the machine 6.500 kg︱main drive motor 15 kW︱turret 12 station VDI 40
          machine is equipped with a closed standard autom. loader: for 12 workpieces 80 mm-220 mm for 14 workpieces 30 mm-160 mm for 28 workpieces 30 mm-85 mm max. total load 120 kg
            chucking diameter 250 mm
            swing diameter 260 mm
            travel -x axis 570 mm
            travel -z axis 200 mm
            control FANUC 18 i-T
            Turning speeds mainspindle 4500 U/min
            numbers of positions in the tool. 12
            Dimensions (L x W x H) 3.700 x 1.500 x 2.400 mm
            weight of the machine 6.500 kg
            main drive motor 15 kW
            turret 12 station VDI 40
            Description :
            machine is equipped with a closed standard autom. loader:
            for 12 workpieces 80 mm-220 mm
            for 14 workpieces 30 mm-160 mm
            for 28 workpieces 30 mm-85 mm
            max. total load 120 kg


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used Lathes Vertical Turret Lathe - Double Column DÖRRIES SCHARMANN Contumat VC 5000/450 MC


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03227 · Vertical Turret Lathe - Double Column

          DÖRRIES SCHARMANN - Contumat VC 5000/450 MC - - 2009 - Siemens 840 D

          Technical details
          faceplate diameter 4500 mm︱swing diameter 5000 mm︱turning height 2645 mm︱control Siemens 840 D ︱cross rail adjustment - vertical 1500 mm︱max. ram stroke 2000 mm︱ram head dimension 300 x 300 mm︱faceplate turning speed range 0,4 - 95 U/min︱main drive 2 x 80 kW︱faceplate load max. 80.000 kg︱
          Equipment / Accessories: - C-axis driven tools HSK 100, 37 kW, 3000 rpm - hydrostatic guides of the linear axes - UWFK milling head 500 Nm +/- 90°, tool and workpiece measurement - tool and process monitoring ARTIS CTM system - workspace visualisation via video camera on the support - tool magazine (arranged on the floor) for turning and milling tools as well as storage for milling heads - work area protection completely closed with automatic covering of the chip chutes - coolant system with filter system, chip conveyor - various tool holders - documentation
            faceplate diameter 4500 mm
            swing diameter 5000 mm
            turning height 2645 mm
            control Siemens 840 D
            cross rail adjustment - vertical 1500 mm
            max. ram stroke 2000 mm
            ram head dimension 300 x 300 mm
            faceplate turning speed range 0,4 - 95 U/min
            main drive 2 x 80 kW
            faceplate load max. 80.000 kg
            Description :
            Equipment / Accessories:
            - C-axis driven tools HSK 100, 37 kW, 3000 rpm
            - hydrostatic guides of the linear axes
            - UWFK milling head 500 Nm +/- 90°, tool and workpiece measurement
            - tool and process monitoring ARTIS CTM system
            - workspace visualisation via video camera on the support
            - tool magazine (arranged on the floor) for turning and milling tools
            as well as storage for milling heads
            - work area protection completely closed with automatic covering of the
            chip chutes
            - coolant system with filter system, chip conveyor
            - various tool holders
            - documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used Lathes Vertical Turret Lathe - Single Column DÖRRIES VCE 2800 / 250 SM F


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03271 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 2800 / 250 SM F - - 2008 - Siemens 840 D

          Technical details
          swing diameter 2800 mm︱turning height 1195 mm︱Control Siemens 840 D ︱turning speeds 224 U/min︱x-travel +-1600 mm︱z-travel 1100 mm︱machine table ︱diameter 2500 mm︱workpiece weight 25000 kg︱power capacity 80 kW︱Torque 35900 Nm︱total power requirement kW︱weight of the machine ca. 66,5 t︱dimensions of the machine ca. m︱faceplate diameter mm︱
          Dörries 6, Machine no. V-800293 - Fixed crossbeam, no tool drive Ram -Cross section of ram: 250 x 250 mm -Travel ram: 1100 mm Equipment/accessories: -Tool changer revolver 4-times in the ram -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation
            swing diameter 2800 mm
            turning height 1195 mm
            Control Siemens 840 D
            turning speeds 224 U/min
            x-travel +-1600 mm
            z-travel 1100 mm
            diameter 2500 mm
            workpiece weight 25000 kg
            power capacity 80 kW
            Torque 35900 Nm
            weight of the machine ca. 66,5 t
            Description :
            Dörries 6, Machine no. V-800293


            - Fixed crossbeam, no tool drive

            Ram
            -Cross section of ram: 250 x 250 mm
            -Travel ram: 1100 mm

            Equipment/accessories:
            -Tool changer revolver 4-times in the ram
            -Own filter system
            -BRANKAMP monitoring
            -REXROTH hydraulic unit
            -Chip conveyor
            -Documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column DÖRRIES VCE 1600/140 SM


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03270 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 1600/140 SM - - 2008 - Siemens 840 D

          Technical details
          swing diameter 1600 mm︱turning height 1285 mm︱Control Siemens 840 D ︱turning speeds 400 U/min︱x-travel +- 950 mm︱z-travel 1100 mm︱workpiece weight 9000 kg︱power capacity 80 kW︱Torque 19900 Nm︱table diameter 1400 mm︱weight of the machine ca. 42 t︱dimensions of the machine ca. 7600 x 5200 x 5400 mm︱
          Dörries 7, Machine number V-800294 Crossbeam: -Cross beam travel: 600 mm Ram: -Ram cross section: 250 x 250 mm (immersion diameter: 340 mm) -Ram travel 1100 mm Equipment/accessories: -Tool magazine -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation
            swing diameter 1600 mm
            turning height 1285 mm
            Control Siemens 840 D
            turning speeds 400 U/min
            x-travel +- 950 mm
            z-travel 1100 mm
            workpiece weight 9000 kg
            power capacity 80 kW
            Torque 19900 Nm
            table diameter 1400 mm
            weight of the machine ca. 42 t
            dimensions of the machine ca. 7600 x 5200 x 5400 mm
            Description :
            Dörries 7, Machine number V-800294


            Crossbeam:
            -Cross beam travel: 600 mm

            Ram:
            -Ram cross section: 250 x 250 mm (immersion diameter: 340 mm)
            -Ram travel 1100 mm

            Equipment/accessories:
            -Tool magazine
            -Own filter system
            -BRANKAMP monitoring
            -REXROTH hydraulic unit
            -Chip conveyor
            -Documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column DÖRRIES VCE 2400/200 SM


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03276 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 2400/200 SM - - 2008 - Siemens 840 D

          Technical details
          swing diameter 2400 mm︱turning height 2445 mm︱Control Siemens 840 D ︱feed range 0-18000 mm/min︱table diameter 2000 mm︱max. table load 17000 kg︱total power requirement 100 kW︱weight of the machine ca. 75 t︱dimensions of the machine ca. 10.000 x 5.500 x 7.100 mm︱
          Dörries 2, machine number V-800289 with hydraulical chuck, without milling function Crossbeam: -Travel crossbeam: 1000 mm (100 mm steps) -Crossbeam support travel: ± 1350 mm Ram : -Cross section of ram: 250 x 250 mm (minimum immersion diameter:380 mm) -Travel ram: 1500 mm Equipment/accessories: -No driven tools -Tool changer/head changer 72 times -Hydraulic chuck -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation
            swing diameter 2400 mm
            turning height 2445 mm
            Control Siemens 840 D
            feed range 0-18000 mm/min
            table diameter 2000 mm
            max. table load 17000 kg
            total power requirement 100 kW
            weight of the machine ca. 75 t
            dimensions of the machine ca. 10.000 x 5.500 x 7.100 mm
            Description :
            Dörries 2, machine number V-800289 with hydraulical chuck, without milling
            function


            Crossbeam:
            -Travel crossbeam: 1000 mm (100 mm steps)
            -Crossbeam support travel: ± 1350 mm

            Ram :
            -Cross section of ram: 250 x 250 mm (minimum immersion diameter:380 mm)
            -Travel ram: 1500 mm

            Equipment/accessories:
            -No driven tools
            -Tool changer/head changer 72 times
            -Hydraulic chuck
            -BRANKAMP monitoring
            -REXROTH hydraulic unit
            -Chip conveyor
            -Documentation




        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column DÖRRIES VCE 2400 / 220 MC


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03272 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 2400 / 220 MC - - 2008 - Siemens 840 D

          Technical details
          swing diameter 2400 mm︱turning height 2145 mm︱Control Siemens 840 D ︱turning speeds 250 U/min︱Speed range - c-axis 0,0025 - 3,15 U/min︱Smallest input increment of the c-axis 1/1000 °︱speed steps of main gearbox 2 ︱x-travel +-1350 mm︱z-travel 1500 mm︱Positioning of the crossbar - grid spacing 100 mm︱ 400 mm/min︱power capacity 100 kW︱machine table ︱Torque 35700 Nm︱diameter 2200 mm︱workpiece weight 17000 kg︱Right crossbar support ︱bit feeder section 250 x 250 mm︱Immersion diameter 340 mm︱x-travel +/- 1350 mm︱
          Dörries 1, Machine no. V-800288 Crossbeam: -Travel crossbeam: 1000 mm (100 mm steps) -Cross beam support travel: ± 1350 mm Ram: -Cross section of ram: 250 x 250 mm (minimum immersion diameter: 380 mm) -Travel ram: 1500 mm Equipment/accessories: -Driven tools -Tool changer/head changer 72 - times -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation
            swing diameter 2400 mm
            turning height 2145 mm
            Control Siemens 840 D
            turning speeds 250 U/min
            Speed range - c-axis 0,0025 - 3,15 U/min
            Smallest input increment of the . 1/1000 °
            speed steps of main gearbox 2
            x-travel +-1350 mm
            z-travel 1500 mm
            Positioning of the crossbar - gr. 100 mm
            400 mm/min
            power capacity 100 kW
            Torque 35700 Nm
            diameter 2200 mm
            workpiece weight 17000 kg
            bit feeder section 250 x 250 mm
            Immersion diameter 340 mm
            x-travel +/- 1350 mm
            Description :
            Dörries 1, Machine no. V-800288


            Crossbeam:
            -Travel crossbeam: 1000 mm (100 mm steps)
            -Cross beam support travel: ± 1350 mm


            Ram:
            -Cross section of ram: 250 x 250 mm (minimum immersion diameter: 380 mm)
            -Travel ram: 1500 mm

            Equipment/accessories:
            -Driven tools
            -Tool changer/head changer 72 - times
            -BRANKAMP monitoring
            -REXROTH hydraulic unit
            -Chip conveyor
            -Documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column DÖRRIES CTE 320/3400


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20435 · Vertical Turret Lathe - Single Column

          DÖRRIES - CTE 320/3400 - - 1981 - Siemens 8 T

          Technical details
          faceplate diameter 3200 mm︱swing diameter 5100 mm︱turning height 2505 mm︱cross rail - adjustment 1500 mm︱max. ram stroke 1250 mm︱slide adjustment 2000 mm︱control Siemens 8 T ︱tool changer 16 STK ︱table load 60 t︱faceplate turning speed range -stepless- 0,8-100 U/min︱feed 0,0 1-1000 mm/min︱rapid traverse 6000 mm/min︱drive of main spindle 75 kW︱weight of the machine ca. 70 t︱dimensions of the machine ca. 9,3 x 6,1 x 6,0 m︱
          machine is in an excellent condition!! with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.
            faceplate diameter 3200 mm
            swing diameter 5100 mm
            turning height 2505 mm
            cross rail - adjustment 1500 mm
            max. ram stroke 1250 mm
            slide adjustment 2000 mm
            control Siemens 8 T
            tool changer 16 STK
            table load 60 t
            faceplate turning speed range -s. 0,8-100 U/min
            feed 0,0 1-1000 mm/min
            rapid traverse 6000 mm/min
            drive of main spindle 75 kW
            weight of the machine ca. 70 t
            dimensions of the machine ca. 9,3 x 6,1 x 6,0 m
            Description :
            machine is in an excellent condition!!
            with div. acessories (photos available)

            machine can be equipped with latest electrics and Siemens CNC control SINUMERIK
            840D sl for additional costs.


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.