,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Lathes

          Machinelist: Lathes


          Center Lathe

          used Lathes Center Lathe SKODA SIU 315


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80468 · Center Lathe

          SKODA - SIU 315 - - 1973/2008 - CNC Siemens 840D

          Technical details
          turning diameter over bed 3.150 mm︱turning diameter over slide rest 2.650 mm︱turning length 15.000 mm︱Control CNC Siemens 840D ︱workpiece weight 160 t︱number of spindle speeds 4 Bereiche – von 0,25 bis
          Pictures from location. Machine is now in warehouse in dismantled condition. See last picture. 8 steadies
            turning diameter over bed 3.150 mm
            turning diameter over slide rest 2.650 mm
            turning length 15.000 mm
            Control CNC Siemens 840D
            workpiece weight 160 t
            number of spindle speeds 4 Bereiche – von 0,25 bis
            Description :
            Pictures from location. Machine is now in warehouse in dismantled condition.
            See last picture.

            8 steadies


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact

          CNC Lathe

          used Lathes CNC Lathe CITIZEN MIYANO OCEAN GN-3200


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-7038 · CNC Lathe

          CITIZEN MIYANO - OCEAN GN-3200 - - 2016 - FANUC Oi-TD

          Technical details
          turning diameter 45 mm︱turning length 50 mm︱control FANUC Oi-TD ︱spindle turning speed range 8000 U/min︱x-axis 180 mm︱z-axis 200 mm︱Number of tools 5 St.︱rapid power traverse in X-and Z direction 15 m/min︱internal diameter of lead tube 11 mm︱Diameter of the holes 17 mm︱dimension of workpiece 40 x 40 mm︱workpiece weight 250 kg︱Working speed 130 / 154 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 1,45 x 0,7 x 1,45 m︱
          High-precision CNC lathe with integrated gantry loader including Machine is suitable for hard turning. -Locking of the rung protection device Optional accessories: Gantry loader -Chuck systems -Air Blow -High-pressure internal cooling -spindle internal cooling -Automatic fire extinguisher -Automatic power off -Chip conveyor -Chip box -Total and preset counter -total and multiple counter -Coolant mist extraction -Damper and duct -Warning light -Specification color Operating hours: 4998 h Processing time: 3788 h
            turning diameter 45 mm
            turning length 50 mm
            control FANUC Oi-TD
            spindle turning speed range 8000 U/min
            x-axis 180 mm
            z-axis 200 mm
            Number of tools 5 St.
            rapid power traverse in X-and Z . 15 m/min
            internal diameter of lead tube 11 mm
            Diameter of the holes 17 mm
            dimension of workpiece 40 x 40 mm
            workpiece weight 250 kg
            Working speed 130 / 154 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 1,45 x 0,7 x 1,45 m
            Description :
            High-precision CNC lathe with integrated gantry loader including

            Machine is suitable for hard turning.

            -Locking of the rung protection device
            Optional accessories:
            Gantry loader
            -Chuck systems
            -Air Blow
            -High-pressure internal cooling
            -spindle internal cooling
            -Automatic fire extinguisher
            -Automatic power off
            -Chip conveyor
            -Chip box
            -Total and preset counter
            -total and multiple counter
            -Coolant mist extraction
            -Damper and duct
            -Warning light
            -Specification color

            Operating hours: 4998 h
            Processing time: 3788 h


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe PINACHO S 940 C 260/1625


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6449 · CNC Lathe

          PINACHO - S 940 C 260/1625 - - 1997 - FAGOR 800 TG

          Technical details
          turning diameter 520 mm︱turning length 1625 mm︱control FAGOR 800 TG ︱greates pass round over bed 530 mm︱swing diameter over slide rest 475 mm︱centre height 260 mm︱bed width 350 mm︱main spindle bore 68 mm︱turning speeds 1500 U/min︱rapid traverse 5 m/min︱Drive 10 kW︱total power requirement kW︱weight of the machine ca. 1,87 t︱dimensions of the machine ca. 2,8x1,4x1,8 m︱
            turning diameter 520 mm
            turning length 1625 mm
            control FAGOR 800 TG
            greates pass round over bed 530 mm
            swing diameter over slide rest 475 mm
            centre height 260 mm
            bed width 350 mm
            main spindle bore 68 mm
            turning speeds 1500 U/min
            rapid traverse 5 m/min
            Drive 10 kW
            weight of the machine ca. 1,87 t
            dimensions of the machine ca. 2,8x1,4x1,8 m


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe RAVENSBURG KV 2 - 1000 CNC


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-90349 · CNC Lathe

          RAVENSBURG - KV 2 - 1000 CNC - - 1986 - Siemens 8 T

          Technical details
          turning diameter 1400 mm︱turning length 6000 mm︱control Siemens 8 T ︱turning diameter over bed slide 1000 mm︱centre height 800 mm︱workpiece weight flying clamped 4500 Kg︱max. workpiece weight between centres 20000 kg︱workpiece weight with 2 steadies 30000 kg︱faceplate diameter 1300 mm︱faceplate turning speed range 1,4-400 U/min︱drive capacity - spindle motor 112 kW︱max. torque on the faceplate 40.000 Nm︱z-axis 6500 mm︱x-axis 700 mm︱feeds x-axis 0,05-50 mm/min︱feeds z-axis 0,05-50 mm/min︱rapid speed 6000 mm/min︱feed power in the axis x + z 35.000 N︱tailstock - quill dia 250 mm︱quill stroke 260 mm︱
            turning diameter 1400 mm
            turning length 6000 mm
            control Siemens 8 T
            turning diameter over bed slide 1000 mm
            centre height 800 mm
            workpiece weight flying clamped 4500 Kg
            max. workpiece weight between ce. 20000 kg
            workpiece weight with 2 steadies 30000 kg
            faceplate diameter 1300 mm
            faceplate turning speed range 1,4-400 U/min
            drive capacity - spindle motor 112 kW
            max. torque on the faceplate 40.000 Nm
            z-axis 6500 mm
            x-axis 700 mm
            feeds x-axis 0,05-50 mm/min
            feeds z-axis 0,05-50 mm/min
            rapid speed 6000 mm/min
            feed power in the axis x + z 35.000 N
            tailstock - quill dia 250 mm
            quill stroke 260 mm


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX 310


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-7020 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 310 - - 2002 - SIEMENS Sinumerik

          Technical details
          turning diameter 250 mm︱turning length 450 mm︱control SIEMENS Sinumerik ︱number of turret 12 pos︱number of driven tools 6 Stück︱turning speed range 0-5000 U/min︱max. torque 1250 Nm︱total power requirement 21 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 3,7 x 1,5 x 1,7 m︱
          Kitagawa 3 - Jaw chuck 250 mm Tailstock Parts catcher Chip conveyor Switch-on hours: 27374 h Spindle hours: 157858 h
            turning diameter 250 mm
            turning length 450 mm
            control SIEMENS Sinumerik
            number of turret 12 pos
            number of driven tools 6 Stück
            turning speed range 0-5000 U/min
            max. torque 1250 Nm
            total power requirement 21 kW
            weight of the machine ca. 3,2 t
            dimensions of the machine ca. 3,7 x 1,5 x 1,7 m
            Description :
            Kitagawa 3 - Jaw chuck 250 mm
            Tailstock
            Parts catcher
            Chip conveyor
            Switch-on hours: 27374 h
            Spindle hours: 157858 h



        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact

          Heavy Duty Lathe

          used Lathes Heavy Duty Lathe SKODA SRM 100


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20976 · Heavy Duty Lathe

          SKODA - SRM 100 - - 1975 -

          Technical details
          turning diameter over bed 1000 mm︱turning diameter over slide rest 710 mm︱turning length 7000 mm︱max. workpiece weight between centres 10000 kg︱spindle turning speed range 1,8-400 U/min︱tailstock quill taper metric 80/1:10 ︱tailstock - quill dia 170 mm︱tailstock - travel of quill 200 mm︱Tailstock quill travel speed 2150 mm/min︱main drive motor 37 kW︱longitudinal feeds: 0,125-48 mm/U ︱face feeds 0,4 der Längsvorschübe ︱weight of the machine ca. 17 t︱dimensions of the machine ca. 11x1,9x2 m︱
          machine was mechanically and electrically overhauled in the last years. - taper turning function - 3 lynettes - misc. center points for tailstock - set of change gears
            turning diameter over bed 1000 mm
            turning diameter over slide rest 710 mm
            turning length 7000 mm
            max. workpiece weight between ce. 10000 kg
            spindle turning speed range 1,8-400 U/min
            tailstock quill taper metric 80/1:10
            tailstock - quill dia 170 mm
            tailstock - travel of quill 200 mm
            Tailstock quill travel speed 2150 mm/min
            main drive motor 37 kW
            longitudinal feeds: 0,125-48 mm/U
            face feeds 0,4 der Längsvorschübe
            weight of the machine ca. 17 t
            dimensions of the machine ca. 11x1,9x2 m
            Description :
            machine was mechanically and electrically overhauled in the last years.

            - taper turning function
            - 3 lynettes
            - misc. center points for tailstock
            - set of change gears


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe ZERBST DXP 5


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-7029 · Heavy Duty Lathe

          ZERBST - DXP 5 - - 1959 / 2012 - Sinumerik 840 D SL

          Technical details
          turning diameter over bed 3.520 mm︱turning diameter over slide rest 3.000 mm︱turning length 15.000 mm︱turning diameter over slide 2.440 mm︱control Sinumerik 840 D SL ︱turning speeds 50 U/min︱workpiece weight max. 80.000 kg︱turning diameter orig. 3500 / mod. 2400 mm︱accuracy +/- 0,01 °︱total power requirement 110 kW︱weight of the machine ca. 154,4 t︱dimensions of the machine ca. 20,7 x 6,0 m︱
          - The modernization (2012) carried out on this machine mainly comprises a new mechanical main gearbox including main spindle drive and the addition of a holding brake plus integration into the existing electrical system. - In the course of the work, it became apparent that the two double-row cylindrical roller bearings had to be reworked.Thus, the entire bearing arrangement was modified and optimally adjusted. - In addition, control and safety-related points had to be modified. - Geometric acceptance report - Temperature behavior of the main spindle bearing arrangement - Test machining Machine is in very good condition. The technical data has been obtained to the best of our ability and belief. It is given in good faith, but its accuracy cannot be guaranteed.
            turning diameter over bed 3.520 mm
            turning diameter over slide rest 3.000 mm
            turning length 15.000 mm
            turning diameter over slide 2.440 mm
            control Sinumerik 840 D SL
            turning speeds 50 U/min
            workpiece weight max. 80.000 kg
            turning diameter orig. 3500 / mod. 2400 mm
            accuracy +/- 0,01 °
            total power requirement 110 kW
            weight of the machine ca. 154,4 t
            dimensions of the machine ca. 20,7 x 6,0 m
            Description :
            - The modernization (2012) carried out on this machine mainly comprises a new
            mechanical main gearbox including
            main spindle drive and the addition of a holding brake plus integration into
            the existing electrical system.
            - In the course of the work, it became apparent that the two double-row
            cylindrical roller bearings had to be
            reworked.Thus, the entire bearing arrangement was modified and optimally
            adjusted.
            - In addition, control and safety-related points had to be modified.
            - Geometric acceptance report
            - Temperature behavior of the main spindle bearing arrangement
            - Test machining

            Machine is in very good condition.

            The technical data has been obtained to the best of our ability and belief.
            It is given in good faith, but its accuracy cannot be guaranteed.




        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled SEIGER SLZ800 / 1500


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20957 · Lathe - cycle-controlled

          SEIGER - SLZ800 / 1500 - - 2006 - SIEMENS SINUMERIK 810 Dpl

          Technical details
          turning diameter 800 mm︱turning length 1500 mm︱control SIEMENS SINUMERIK 810 Dpl ︱workpiece weight flying clamped 750 ︱workpiece weight with one steady 2200 kg︱swing diameter over face slide 540 mm︱power capacity 20/28 kW︱spindle bore 83 mm︱weight of the machine ca. 6 t︱dimensions of the machine ca. 3,5x2,8x2 m︱
          gearbox must be checked!! machine without tailstock! -without tools -without jaws
            turning diameter 800 mm
            turning length 1500 mm
            control SIEMENS SINUMERIK 810 Dpl
            workpiece weight flying clamped 750
            workpiece weight with one steady 2200 kg
            swing diameter over face slide 540 mm
            power capacity 20/28 kW
            spindle bore 83 mm
            weight of the machine ca. 6 t
            dimensions of the machine ca. 3,5x2,8x2 m
            Description :
            gearbox must be checked!!
            machine without tailstock!
            -without tools
            -without jaws


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled COMEV CM 350 x 4000


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-7003 · Lathe - cycle-controlled

          COMEV - CM 350 x 4000 - - 1995 - Pico Auto Memory

          Technical details
          turning diameter 700 mm︱turning length 4000 mm︱control Pico Auto Memory ︱centre height 350 mm︱turning diameter over slide 480 mm︱spindle passage 80 mm︱tailstock quill taper MT MK5 ︱turning speeds 1500 U/min︱total power requirement 12,5 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. 5,6x1,6x2,25 m︱
          Tailstock MK 5 Quick change steel holder Cycle control Pico Auto Memory steady Röhm 315 wedge bar chuck coolant device various steel holders
            turning diameter 700 mm
            turning length 4000 mm
            control Pico Auto Memory
            centre height 350 mm
            turning diameter over slide 480 mm
            spindle passage 80 mm
            tailstock quill taper MT MK5
            turning speeds 1500 U/min
            total power requirement 12,5 kW
            weight of the machine ca. 6 t
            dimensions of the machine ca. 5,6x1,6x2,25 m
            Description :
            Tailstock MK 5
            Quick change steel holder
            Cycle control Pico Auto Memory
            steady
            Röhm 315 wedge bar chuck
            coolant device
            various steel holders


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used Lathes Turning Automatic Lathe - swiss lathe TORNOS Deco 13 bi


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-7035 · Turning Automatic Lathe - swiss lathe

          TORNOS - Deco 13 bi - - 2001 - Fanuc

          Technical details
          bar capacity 1-16 mm︱turning length 160 mm︱Control Fanuc ︱turning speeds 100 - 12.000 U/min︱Number of axles 6 St.︱feed 20 m/min︱bar length 3 m︱total power requirement 3,7 kW︱weight of the machine ca. 3,40 t︱dimensions of the machine ca. 6,37 x 1,10 x 1,95 m︱
          6 axes, 2 spindles: - Movable headstock: Z1, S1 - 1 system of independent linear tool X1/Y1 (S3) - 1 independent pick-up spindle with a system of independent linear second tool: X2/Y2/Z2 (S2) - 1 system of independent tools in back machining: 3 tools 1 x driven tool Loading magazine Bechler, integrated into the machine 2-3 turning holders 1 x cutter 1 x drilling quill Operating hours: approx. 40500 h
            bar capacity 1-16 mm
            turning length 160 mm
            Control Fanuc
            turning speeds 100 - 12.000 U/min
            Number of axles 6 St.
            feed 20 m/min
            bar length 3 m
            total power requirement 3,7 kW
            weight of the machine ca. 3,40 t
            dimensions of the machine ca. 6,37 x 1,10 x 1,95 m
            Description :
            6 axes, 2 spindles:
            - Movable headstock: Z1, S1
            - 1 system of independent linear tool X1/Y1 (S3)
            - 1 independent pick-up spindle with a system of independent linear second tool:
            X2/Y2/Z2 (S2)
            - 1 system of independent tools in back machining: 3 tools
            1 x driven tool
            Loading magazine Bechler, integrated into the machine
            2-3 turning holders
            1 x cutter
            1 x drilling quill
            Operating hours: approx. 40500 h


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Turning Automatic Lathe - swiss lathe TORNOS Deco 13 bi


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-7034 · Turning Automatic Lathe - swiss lathe

          TORNOS - Deco 13 bi - - 2001 - Fanuc

          Technical details
          bar capacity 1-16 mm︱turning length 160 mm︱Control Fanuc ︱turning speeds 100 - 12.000 U/min︱Number of axles 6 St.︱feed 20 m/min︱bar length 3 m︱total power requirement 3,7 kW︱weight of the machine ca. 3,40 t︱dimensions of the machine ca. 6,37 x 1,10 x 1,95 m︱
          6 axes, 2 spindles: - Movable headstock: Z1, S1 - 1 system of independent linear tool X1/Y1 (S3) - 1 independent pick-up spindle with a system of independent linear second tool: X2/Y2/Z2 (S2) - 1 system of independent tools in back machining: 3 tools 1 x driven tool Loading magazine Bechler, integrated into the machine 2-3 turning holders 1 x cutter 1 x drilling quill Operating hours: approx. 40500 h
            bar capacity 1-16 mm
            turning length 160 mm
            Control Fanuc
            turning speeds 100 - 12.000 U/min
            Number of axles 6 St.
            feed 20 m/min
            bar length 3 m
            total power requirement 3,7 kW
            weight of the machine ca. 3,40 t
            dimensions of the machine ca. 6,37 x 1,10 x 1,95 m
            Description :
            6 axes, 2 spindles:
            - Movable headstock: Z1, S1
            - 1 system of independent linear tool X1/Y1 (S3)
            - 1 independent pick-up spindle with a system of independent linear second tool:
            X2/Y2/Z2 (S2)
            - 1 system of independent tools in back machining: 3 tools
            1 x driven tool
            Loading magazine Bechler, integrated into the machine
            2-3 turning holders
            1 x cutter
            1 x drilling quill
            Operating hours: approx. 40500 h


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical Turning Machine

          used Lathes Vertical Turning Machine EMAG VL5


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20974 · Vertical Turning Machine

          EMAG - VL5 - - 2001 - FANUC 18 i-T

          Technical details
          chucking diameter 250 mm︱swing diameter 260 mm︱travel -x axis 570 mm︱travel -z axis 200 mm︱control FANUC 18 i-T ︱Turning speeds mainspindle 4500 U/min︱numbers of positions in the tool changer 12 ︱Dimensions (L x W x H) 3.700 x 1.500 x 2.400 mm︱weight of the machine 6.500 kg︱main drive motor 15 kW︱turret 12 station VDI 40
          machine is equipped with a closed standard autom. loader: for 12 workpieces 80 mm-220 mm for 14 workpieces 30 mm-160 mm for 28 workpieces 30 mm-85 mm max. total load 120 kg
            chucking diameter 250 mm
            swing diameter 260 mm
            travel -x axis 570 mm
            travel -z axis 200 mm
            control FANUC 18 i-T
            Turning speeds mainspindle 4500 U/min
            numbers of positions in the tool. 12
            Dimensions (L x W x H) 3.700 x 1.500 x 2.400 mm
            weight of the machine 6.500 kg
            main drive motor 15 kW
            turret 12 station VDI 40
            Description :
            machine is equipped with a closed standard autom. loader:
            for 12 workpieces 80 mm-220 mm
            for 14 workpieces 30 mm-160 mm
            for 28 workpieces 30 mm-85 mm
            max. total load 120 kg


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used Lathes Vertical Turret Lathe - Single Column DÖRRIES CTE 320/3400


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20435 · Vertical Turret Lathe - Single Column

          DÖRRIES - CTE 320/3400 - - 1981 - Siemens 8 T

          Technical details
          faceplate diameter 3200 mm︱swing diameter 5100 mm︱turning height 2505 mm︱cross rail - adjustment 1500 mm︱max. ram stroke 1250 mm︱slide adjustment 2000 mm︱control Siemens 8 T ︱tool changer 16 STK ︱table load 60 t︱faceplate turning speed range -stepless- 0,8-100 U/min︱feed 0,0 1-1000 mm/min︱rapid traverse 6000 mm/min︱drive of main spindle 75 kW︱weight of the machine ca. 70 t︱dimensions of the machine ca. 9,3 x 6,1 x 6,0 m︱
          machine is in an excellent condition!! with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.
            faceplate diameter 3200 mm
            swing diameter 5100 mm
            turning height 2505 mm
            cross rail - adjustment 1500 mm
            max. ram stroke 1250 mm
            slide adjustment 2000 mm
            control Siemens 8 T
            tool changer 16 STK
            table load 60 t
            faceplate turning speed range -s. 0,8-100 U/min
            feed 0,0 1-1000 mm/min
            rapid traverse 6000 mm/min
            drive of main spindle 75 kW
            weight of the machine ca. 70 t
            dimensions of the machine ca. 9,3 x 6,1 x 6,0 m
            Description :
            machine is in an excellent condition!!
            with div. acessories (photos available)

            machine can be equipped with latest electrics and Siemens CNC control SINUMERIK
            840D sl for additional costs.


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.