,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Lathes

          Machinelist: Lathes


          Facing and Centering Lathe

          used Lathes Facing and Centering Lathe Tadu


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D720 · Facing and Centering Lathe

          Tadu - - - -

          Technical details
          CNC brand Fagor ︱CNC model 8050 T ︱Swing over bed 2500 mm ø︱4-Jaw chuck 1800 mm ø︱
          Center
            CNC brand Fagor
            CNC model 8050 T
            Swing over bed 2500 mm ø
            4-Jaw chuck 1800 mm ø
            Description :
            Center


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          Facing Lathe

          used Lathes Facing Lathe TADU FS 1250 CNC


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1010063 · Facing Lathe

          TADU - FS 1250 CNC - - NB - FAGOR 8050 T

          Technical details
          faceplate diameter 1800 mm︱turning diameter over slide rest 2500 mm︱turning length mm︱Control FAGOR 8050 T ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1010063 Type of machine CNC Facelathe Make TADU Type FS 1250 Build in nb Type of control FAGOR, 8050T Turnung diameter over bed 2500 mm Additional information 4-jaws chuck 1800 mm
            faceplate diameter 1800 mm
            turning diameter over slide rest 2500 mm
            Control FAGOR 8050 T
            Description :
            Stocknumber 1010063
            Type of machine CNC Facelathe
            Make TADU
            Type FS 1250
            Build in nb
            Type of control FAGOR, 8050T
            Turnung diameter over bed 2500 mm


            Additional information
            4-jaws chuck 1800 mm



        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used Lathes Turning Automatic Lathe - swiss lathe Maier ML 32-F2


          • Detlef Jahn e. K.
          • Gewerbepark 8
          • 75331 Engelsbrand
          • Deutschland

          • +49 (0)7235 974820
            +49 (0)7235 9748224
          • info@langdreher.de
            www.langdreher.de
          #1092-02926 · Turning Automatic Lathe - swiss lathe

          Maier - ML 32-F2 - - 2019 - Fanuc 31i-Model B

          Technical details
          turning diameter over bed 32 mm︱spindle passage 32 mm︱turning length 450 mm︱Control Fanuc 31i-Model B ︱c-axis 0,001 Grad︱gripping station 32 mm︱c-axis 0,001 0︱speeds 6000 U/min︱turret (x-stations) 2x16 Stationen︱worktool system 16 Stirnseite︱worktool system 16 Quer-Rückseite︱worktool system 5 Drehmeißel/Turn︱total power requirement 3,7/5,5 kW︱weight of the machine ca. 4,6 t︱dimensions of the machine ca. 2,6 x 2 x 1,9 m︱bar loader FMB 3-36/3200 ︱driven tools 24 16+8︱
          CNC Swiss type lathe Maier ML 32-F2, year 2019 with loading magazine FMB 3-36 Very good condition, few working hours # Vib Turn chip breaking software # FMB 3-36 is equipped with two channels 22 and 32mm. # Pick-up spindle is equipped with Forkardt chuck. Max. overlap diameter 9mm # Extended headstock stroke Z1 axis 450mm (main spindle) # Extended headstock stroke Z2-axis 340mm (pick-up spindle) # High pressure pump 140bar with paper belt filter # Pneumatic guide bush unit up to 33mm with 3 switching positions (open, closed and guiding without grippers) # Discharge of long parts # Operating hours: Control On 9781 h / In progress 6095 h # Hyfra oil cooler, model Alpha 5 New price € 443,530
            turning diameter over bed 32 mm
            spindle passage 32 mm
            turning length 450 mm
            Control Fanuc 31i-Model B
            c-axis 0,001 Grad
            gripping station 32 mm
            c-axis 0,001 0
            speeds 6000 U/min
            turret (x-stations) 2x16 Stationen
            worktool system 16 Stirnseite
            worktool system 16 Quer-Rückseite
            worktool system 5 Drehmeißel/Turn
            total power requirement 3,7/5,5 kW
            weight of the machine ca. 4,6 t
            dimensions of the machine ca. 2,6 x 2 x 1,9 m
            bar loader FMB 3-36/3200
            driven tools 24 16+8
            Description :
            CNC Swiss type lathe Maier ML 32-F2, year 2019 with loading magazine FMB 3-36
            Very good condition, few working hours
            # Vib Turn chip breaking software
            # FMB 3-36 is equipped with two channels 22 and 32mm.
            # Pick-up spindle is equipped with Forkardt chuck.
            Max. overlap diameter 9mm
            # Extended headstock stroke Z1 axis 450mm (main spindle)
            # Extended headstock stroke Z2-axis 340mm (pick-up spindle)
            # High pressure pump 140bar with paper belt filter
            # Pneumatic guide bush unit up to 33mm with 3 switching positions
            (open, closed and guiding without grippers)
            # Discharge of long parts
            # Operating hours: Control On 9781 h / In progress 6095 h
            # Hyfra oil cooler, model Alpha 5

            New price € 443,530




        • Detlef Jahn e. K.
        • Gewerbepark 8
        • 75331 Engelsbrand
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Turning Automatic Lathe - swiss lathe MAIER ML32-F4


          • KARAT Werkzeugmaschinen GmbH
          • Lily-Braun-Straße 45
          • 40699 Erkrath
          • Deutschland

          • 02104 / 138 59 30
            02104 / 138 59 31
          • info@karat-maschinen.de
            www.karat-maschinen.de
          #1097-30298 · Turning Automatic Lathe - swiss lathe

          MAIER - ML32-F4 - - 2008 -

          Technical details
          turning diameter over bed 32 mm︱spindle passage 32 mm︱turning length 450 mm︱spindle stroke 450 mm︱main spindle speeds: 8000 U/min︱spindle drive 5,5/3,7 kW︱Sub - spindle - bar diameter 26 mm︱turning speed range sub spindle 8000 U/min︱motor power 5,5/3,7 kW︱collets 145E ︱total power requirement 16 kVA︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. 2,4 x 1,6 x 2,3 m︱
          MAIER swiss lathe in very good condition with control FANUC 31iTB equipped with: - System 1 - 8 driven tool stations (tool turret crosswise) - System 2 - 8 driven tool stations (tool turret back-transverse) - System 3 - 16 tool stations all driven - System 4 - 8 driven tool stations (transverse tool turret) - counter spindle - Tool breakage control (WPM) - C-axis on main and counter spindle - extended Z1 axis travel 450 mm instead of 220 mm - Y2 - axis for backworking (system 4) - hydraulic clamping incl. hydraulic - aggregate - parts conveyor belt for removal of finished parts - discharge table for discharge of long parts - discharge of long parts (flange + tube) - adapter flange + tube for unloading long parts through the spindle - bar loading magazine make FMB Turbo 3-36 bar length 4,2 m - KNOLL high pressure coolant system 140 / 50 bar with paper belt filter system - Fire protection system make KRAFT & BAUER - tool holder - package - electronic handwheel - chip conveyor The machine can be inspected under power!
            turning diameter over bed 32 mm
            spindle passage 32 mm
            turning length 450 mm
            spindle stroke 450 mm
            main spindle speeds: 8000 U/min
            spindle drive 5,5/3,7 kW
            Sub - spindle - bar diameter 26 mm
            turning speed range sub spindle 8000 U/min
            motor power 5,5/3,7 kW
            collets 145E
            total power requirement 16 kVA
            weight of the machine ca. 4,2 t
            dimensions of the machine ca. 2,4 x 1,6 x 2,3 m
            Description :
            MAIER swiss lathe in very good condition with control FANUC 31iTB
            equipped with:
            - System 1 - 8 driven tool stations (tool turret crosswise)
            - System 2 - 8 driven tool stations (tool turret back-transverse)
            - System 3 - 16 tool stations all driven
            - System 4 - 8 driven tool stations (transverse tool turret)
            - counter spindle
            - Tool breakage control (WPM)
            - C-axis on main and counter spindle
            - extended Z1 axis travel 450 mm instead of 220 mm
            - Y2 - axis for backworking (system 4)
            - hydraulic clamping incl. hydraulic - aggregate
            - parts conveyor belt for removal of finished parts
            - discharge table for discharge of long parts
            - discharge of long parts (flange + tube)
            - adapter flange + tube for unloading long parts through the spindle
            - bar loading magazine make FMB Turbo 3-36 bar length 4,2 m
            - KNOLL high pressure coolant system 140 / 50 bar with paper belt filter system
            - Fire protection system make KRAFT & BAUER
            - tool holder - package
            - electronic handwheel
            - chip conveyor

            The machine can be inspected under power!


        • KARAT Werkzeugmaschinen GmbH
        • Lily-Braun-Straße 45
        • 40699 Erkrath
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Turning Automatic Lathe - swiss lathe MAIER ML32 F1 Proline


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1732 · Turning Automatic Lathe - swiss lathe

          MAIER - ML32 F1 Proline - - 2006 - GE FANUC MAIER PRO

          Technical details
          turning diameter over bed 32 mm︱spindle passage 32 mm︱turning length 450 mm︱Control GE FANUC MAIER PRO ︱total power requirement kW︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. 2,4 x 1,6 x 2,3 m m︱
          Switch-on time: 70,076 hours. Automatic time: 40,135 hours. Counter spindle available (see pictures) Machine was converted for spindle production (see loading magazine), dismantling According to the previous owner, this was easily possible. Machine brings alarms (see pictures)
            turning diameter over bed 32 mm
            spindle passage 32 mm
            turning length 450 mm
            Control GE FANUC MAIER PRO
            weight of the machine ca. 4,2 t
            dimensions of the machine ca. 2,4 x 1,6 x 2,3 m m
            Description :
            Switch-on time: 70,076 hours.
            Automatic time: 40,135 hours.

            Counter spindle available (see pictures)
            Machine was converted for spindle production (see loading magazine), dismantling
            According to the previous owner, this was easily possible.
            Machine brings alarms (see pictures)


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.