,
Europees netwerk van dealers van voorraadhoudende machines

Bitte einen Suchbegriff eingeben - Voer een zoekterm in
Categorie:
    Fabrikant:
      machines:
        Handelaar:

          Machines available immediately

          Machinelist: Machines available immediately


          Plate Bending Machine - 3 Rolls

          used Machines available immediately Plate Bending Machine  - 3 Rolls AKYAPAK 1030 x 70


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-19334 · Plate Bending Machine - 3 Rolls

          AKYAPAK - 1030 x 70 - - 1998 -

          Technical details
          sheet width mm︱plate thickness mm︱pre-bending 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          working width: 1050 mm

          metal sheet thickness: 1,5 mm

          upper roller-Ø: 70 mm

          below roller-Ø: 70 mm
          Njw93ychg

          weight: 320 kg

          space needed: 700 x 1300 x 1100 mm
            Description :
            working width: 1050 mm



            metal sheet thickness: 1,5 mm



            upper roller-Ø: 70 mm



            below roller-Ø: 70 mm

            Njw93ychg



            weight: 320 kg



            space needed: 700 x 1300 x 1100 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Bending Machine - 4 Rolls

          used Machines available immediately Plate Bending Machine -  4 Rolls AKYAPAK AHS 30/86


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05155 · Plate Bending Machine - 4 Rolls

          AKYAPAK - AHS 30/86 - - Neu / New -

          Technical details
          sheet width 3100 mm︱plate thickness 100 mm︱pre-bending 86 ︱diameter of upper rolls 750 mm︱diameter of lower rolls 700 mm︱side roll diameter 600 mm︱power capacity 132 kW︱min. bending diameter 825 / 2750 mm︱weight of the machine ca. 80 t︱dimensions of the machine ca. 8,0 x 3,1 x 4,1 m︱
          4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulic powered cover for easy material extracting - 2-axis digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm Optional Accessories: - variable speed of rotation (10.187 Euro) - material feeding table 1000 x 2000 (5.600 Euro) - center support (33.250 Euro) - 2 x side supports (29.000 Euro)
            sheet width 3100 mm
            plate thickness 100 mm
            pre-bending 86
            diameter of upper rolls 750 mm
            diameter of lower rolls 700 mm
            side roll diameter 600 mm
            power capacity 132 kW
            min. bending diameter 825 / 2750 mm
            weight of the machine ca. 80 t
            dimensions of the machine ca. 8,0 x 3,1 x 4,1 m
            Description :
            4 Rolls Hydraulic Bending Machine

            Standard Features:
            - hardened and polished rolls
            - complete body made of ST-52 steel
            - hydraulic powered cover for easy material extracting
            - 2-axis digital readout for side rolls
            - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls
            vertical movements are hydraulic powered
            - separate control panel
            - oil cooler
            - conic bending
            - in accordance to CE-norm

            Optional Accessories:
            - variable speed of rotation (10.187 Euro)
            - material feeding table 1000 x 2000 (5.600 Euro)
            - center support (33.250 Euro)
            - 2 x side supports (29.000 Euro)



        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Plate Bending Machine -  4 Rolls AKYAPAK AHS 30/32


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05862 · Plate Bending Machine - 4 Rolls

          AKYAPAK - AHS 30/32 - - Neu / New -

          Technical details
          sheet width 3100 mm︱plate thickness 40 mm︱pre-bending 32 ︱diameter of upper rolls 460 mm︱diameter of lower rolls 420 mm︱side roll diameter 360 mm︱power capacity 30 kW︱min. bending diameter 1380 mm︱weight of the machine ca. 30,1 t︱dimensions of the machine ca. 6,3 x 2,3 x 2,6 m︱
          4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm - Warranty 12 months Optional Accessories: - variable speed of rotation (5.858,00 Euro) - material feeding table (5.100,00 Euro) - center support (18.750,00 Euro) - 2 x side supports (15.000,00 Euro)
            sheet width 3100 mm
            plate thickness 40 mm
            pre-bending 32
            diameter of upper rolls 460 mm
            diameter of lower rolls 420 mm
            side roll diameter 360 mm
            power capacity 30 kW
            min. bending diameter 1380 mm
            weight of the machine ca. 30,1 t
            dimensions of the machine ca. 6,3 x 2,3 x 2,6 m
            Description :
            4 Rolls Hydraulic Bending Machine

            Standard Features:
            - hardened and polished rolls
            - complete body made of ST-52 steel
            - hydraulically opened/closed drop end controlled from control panel
            - digital readout for side rolls
            - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls
            vertical movements are hydraulic powered
            - separate control panel
            - oil cooler
            - conic bending
            - in accordance to CE-norm
            - Warranty 12 months

            Optional Accessories:
            - variable speed of rotation (5.858,00 Euro)
            - material feeding table (5.100,00 Euro)
            - center support (18.750,00 Euro)
            - 2 x side supports (15.000,00 Euro)



        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Bending Machine - 4 Rolls

          used Machines available immediately Plate Bending Machine - 4 Rolls AKYAPAK AHS 30/40


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08500 · Plate Bending Machine - 4 Rolls

          AKYAPAK - AHS 30/40 - - NEU / NEW -

          Technical details
          sheet width 3100 mm︱plate thickness 50 mm︱pre-bending 40 mm︱total power requirement kW︱weight of the machine ca. 40 t︱dimensions of the machine ca. 6,7 x 3,0 x 3,0 m︱
          4-ROLL Hydraulic Plate Rolling Machine Working length 3100 mm Maximum thickness Pre-bending 40 mm Bending 50 mm Yield Point: 240 N/mm2 Number of rolls 4 Motor Power 55 kW Min. diameter mm - Ø Top Roll Diameter x 3 Top roll Ø 540 mm Bottom roll Ø 510 mm Side roll Ø 440 mm Length 6700 mm Height 3000 mm Width 3000 mm Weight 40.000 kg With: Cone bending device Induction hardened rolls Digital readout for side rolls Fully welded steel (St-52) frame Separate moveable control panel Dual bending speeds Electronic Parallelism All rolls are mounted in spherical roller bearings Hydraulically opened/closed drop end controlled from control panel Activation of cone rolling function and position adjustment via buttons on the control panel Central rolls (top and bottom rolls) driven by hydraulic motors and planetary gear reducers Electro – hydraulic calibration OPTIONAL FEATURES AND ACCESSORIES: Unit Qty Price (€) Variable speed of rotation: 6.600,- € Material feeding table: 5.100,- € Center support: 18.750,- € Side supports (left and right): 15.150,- € GENERAL CONDITIONS: WARRANTY 12 Months. The warranty expires in case of incorrect utilization and requires using original Akyapak spare parts and consumables. The warranty period starts after installation and commissioning of the equipment. INCOTERMS Exworks, Bursa, Turkey PAYMENT Via cable money transfer 30% downpayment with the placement of order. 70% balance upon notice of goods ready for shipment INSTALLATION, COMISSIONING AND TRAINING Installation, commissioning and training requested by a customer is provided by Akyapak for an extra fee. All required items such as lubricants, oil, air compressor, items for connections of hydraulic, electric and air, test materials to be used during training and all other possible requirements are subject to be provided by the purchaser. OFFER VALIDITY 30 days.
            sheet width 3100 mm
            plate thickness 50 mm
            pre-bending 40 mm
            weight of the machine ca. 40 t
            dimensions of the machine ca. 6,7 x 3,0 x 3,0 m
            Description :
            4-ROLL Hydraulic Plate Rolling Machine

            Working length 3100 mm
            Maximum thickness Pre-bending 40 mm
            Bending 50 mm
            Yield Point: 240 N/mm2
            Number of rolls 4
            Motor Power 55 kW
            Min. diameter mm - Ø Top Roll Diameter x 3
            Top roll Ø 540 mm
            Bottom roll Ø 510 mm
            Side roll Ø 440 mm
            Length 6700 mm
            Height 3000 mm
            Width 3000 mm
            Weight 40.000 kg

            With:
            Cone bending device
            Induction hardened rolls
            Digital readout for side rolls
            Fully welded steel (St-52) frame
            Separate moveable control panel
            Dual bending speeds
            Electronic Parallelism
            All rolls are mounted in spherical roller bearings
            Hydraulically opened/closed drop end controlled from control panel
            Activation of cone rolling function and position adjustment via buttons on
            the control panel
            Central rolls (top and bottom rolls) driven by hydraulic motors and
            planetary gear reducers
            Electro – hydraulic calibration

            OPTIONAL FEATURES AND ACCESSORIES:
            Unit Qty Price (€)
            Variable speed of rotation: 6.600,- €
            Material feeding table: 5.100,- €
            Center support: 18.750,- €
            Side supports (left and right): 15.150,- €

            GENERAL CONDITIONS:

            WARRANTY
            12 Months. The warranty expires in case of incorrect utilization and requires
            using original Akyapak spare parts and consumables. The warranty period starts
            after installation and commissioning of the equipment.

            INCOTERMS
            Exworks, Bursa, Turkey

            PAYMENT
            Via cable money transfer
            30% downpayment with the placement of order.
            70% balance upon notice of goods ready for shipment

            INSTALLATION, COMISSIONING AND TRAINING
            Installation, commissioning and training requested by a customer is provided by
            Akyapak for an extra fee.
            All required items such as lubricants, oil, air compressor, items for
            connections of hydraulic, electric and air, test materials to be used during
            training and all other possible requirements are subject to be provided by the
            purchaser.

            OFFER VALIDITY
            30 days.




        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact

          Section Bender

          used Machines available immediately Section Bender AKYAPAK APK 45


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7089 · Section Bender

          AKYAPAK - APK 45 - - NEU -

          Technical details
          I - beam section - flat steel 80 x 15 (d600) mm︱I-beam section - upend 60 x 10 (d800) mm︱L-beam 45 x 5 (d600) mm︱bar material - diameter 35,0 (d700) mm︱tube diameter 60 x 2,0 (d1000) mm︱square material 45x45x3,0 mm︱total power requirement 2,25 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 780 x 950 x 1450 mm︱
          - higher speed 6.6m/min - l-steel flat 80x15 (d600)mm - l-steel on edge 60x10 (d800) mm - Angle steel 45x5 (d600) mm - Solid material Ø 35.0 (d700) mm - Pipe diameter max. 60x2.0 (d1000) mm - Square material 45x45x3.0 mm
            I - beam section - flat steel 80 x 15 (d600) mm
            I-beam section - upend 60 x 10 (d800) mm
            L-beam 45 x 5 (d600) mm
            bar material - diameter 35,0 (d700) mm
            tube diameter 60 x 2,0 (d1000) mm
            square material 45x45x3,0 mm
            total power requirement 2,25 kW
            weight of the machine ca. 0,5 t
            dimensions of the machine ca. 780 x 950 x 1450 mm
            Description :
            - higher speed 6.6m/min
            - l-steel flat 80x15 (d600)mm
            - l-steel on edge 60x10 (d800) mm
            - Angle steel 45x5 (d600) mm
            - Solid material Ø 35.0 (d700) mm
            - Pipe diameter max. 60x2.0 (d1000) mm
            - Square material 45x45x3.0 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Section Bender AKYAPAK APK 61


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2360009 · Section Bender

          AKYAPAK - APK 61 - - NEU -

          Technical details
          I - beam section - flat steel 80 x 20 (d 1200) mm︱I-beam section - upend 80 x 25 (d 2100) mm︱L-beam 50 x 50 x 6 (d 1000) mm︱bar material - diameter 40,0 (d 800) mm︱tube diameter 70 x 2 (d 1600) mm︱square material 60x60x3 (d 4000) mm︱total power requirement 4,75 kW︱weight of the machine ca. 1080 kg︱dimensions of the machine ca. 0,95 x 1,4 x 1,45 mm︱
          - hydraulic roller drive - Planetary gear delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel - 3 powered rollers - Digital display - Machine can be used horizontally and vertically - CE mark / declaration of conformity - User manual in German
            I - beam section - flat steel 80 x 20 (d 1200) mm
            I-beam section - upend 80 x 25 (d 2100) mm
            L-beam 50 x 50 x 6 (d 1000) mm
            bar material - diameter 40,0 (d 800) mm
            tube diameter 70 x 2 (d 1600) mm
            square material 60x60x3 (d 4000) mm
            total power requirement 4,75 kW
            weight of the machine ca. 1080 kg
            dimensions of the machine ca. 0,95 x 1,4 x 1,45 mm
            Description :
            - hydraulic roller drive
            - Planetary gear delivery of the 2 lower rollers
            - for extra small bending radii
            - hardened tool holder (42CrMo4)
            - Standard roller set, hardened
            - lateral straightening rollers
            - mobile control panel
            - 3 powered rollers
            - Digital display
            - Machine can be used horizontally and vertically
            - CE mark / declaration of conformity
            - User manual in German


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Section Bender AKYAPAK APK 81


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2360008 · Section Bender

          AKYAPAK - APK 81 - - NEU -

          Technical details
          I - beam section - flat steel 120 x 30 (d600) mm︱I-beam section - upend 100 x 20 (d2100) mm︱L-beam 80x80x8 (d2000) mm︱bar material - diameter 60 (d1000) mm︱tube diameter 100 x 3 (d3000) mm︱square material 50x25x2 (d600) mm︱total power requirement 5,5 kW︱weight of the machine ca. 1500 kg︱dimensions of the machine ca. 1240 x 1375 x 1540 mm︱
          Furnishing: - hydraulic roller drive - Planetary gear delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - Hydraulically adjustable side straightening rollers - mobile control panel - 3 powered rollers - Digital display - Machine can be used horizontally and vertically - CE mark / declaration of conformity - User manual in German Special accessories included in the price: - hydraulic side roller adjustment
            I - beam section - flat steel 120 x 30 (d600) mm
            I-beam section - upend 100 x 20 (d2100) mm
            L-beam 80x80x8 (d2000) mm
            bar material - diameter 60 (d1000) mm
            tube diameter 100 x 3 (d3000) mm
            square material 50x25x2 (d600) mm
            total power requirement 5,5 kW
            weight of the machine ca. 1500 kg
            dimensions of the machine ca. 1240 x 1375 x 1540 mm
            Description :
            Furnishing:
            - hydraulic roller drive
            - Planetary gear delivery of the 2 lower rollers
            - for extra small bending radii
            - hardened tool holder (42CrMo4)
            - Standard roller set, hardened
            - Hydraulically adjustable side straightening rollers
            - mobile control panel
            - 3 powered rollers
            - Digital display
            - Machine can be used horizontally and vertically
            - CE mark / declaration of conformity
            - User manual in German

            Special accessories included in the price:
            - hydraulic side roller adjustment


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Section Bender AKYAPAK APK 30


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003404 · Section Bender

          AKYAPAK - APK 30 - - 2007 -

          Technical details
          I - beam section - flat steel 50 x 10 mm︱I-beam section - upend 80 x 15 mm︱I-beam section - upend 80 x 15 mm︱L-beam 50 mm︱round material 30,0 mm︱bar material dia. max. 1 1/2" mm︱bar material - diameter 30,0 mm︱weight 185 kg︱range L-W-H 670 x 530 x 1350 mm︱square material 40 x 40 x 3 mm︱pipes 60 x 2,0 mm︱total power requirement 0,75 kW︱
          Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided)
            I - beam section - flat steel 50 x 10 mm
            I-beam section - upend 80 x 15 mm
            I-beam section - upend 80 x 15 mm
            L-beam 50 mm
            round material 30,0 mm
            bar material dia. max. 1 1/2" mm
            bar material - diameter 30,0 mm
            weight 185 kg
            range L-W-H 670 x 530 x 1350 mm
            square material 40 x 40 x 3 mm
            pipes 60 x 2,0 mm
            total power requirement 0,75 kW
            Description :
            Equipment:
            • Base frame of the machine
            • Foot switch
            • Standard-rolls (divided)


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact

          Rotary Welding Table

          used Machines available immediately Rotary Welding Table AKYAPAK SRH 1000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2450014 · Rotary Welding Table

          AKYAPAK - SRH 1000 - - Neu -

          Technical details
          table diameter 900 mm︱table load 1.000 kg︱Frontal Loading Center (A) 150 mm︱Side Loading Center (B) 150 mm︱Rotating speeds 0,1 - 1,1 UpM︱T-slots 6 x M16 ︱Tilt Angle 90-180-105 °︱Tilting Speed 30 sn min./90°︱weight of the machine ca. 930 kg︱
            table diameter 900 mm
            table load 1.000 kg
            Frontal Loading Center (A) 150 mm
            Side Loading Center (B) 150 mm
            Rotating speeds 0,1 - 1,1 UpM
            T-slots 6 x M16
            Tilt Angle 90-180-105 °
            Tilting Speed 30 sn min./90°
            weight of the machine ca. 930 kg


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact

          Rotary Welding Table - Round Surface

          used Machines available immediately Rotary Welding Table - Round Surface AKYAPAK SRP - 5


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05047 · Rotary Welding Table - Round Surface

          AKYAPAK - SRP - 5 - - Neu / New -

          Technical details
          table diameter 1525 mm︱table load 5,0 t︱swivelling range 135° deg.︱table rotating 360° deg.︱table turning speeds 0,05 - 1 U/min︱height adjustment mm︱table drive 1,5 kW︱total power requirement kW︱weight of the machine ca. 2,6 t︱dimensions of the machine ca. 1,80 x 1,54 x 1,20 m︱
          Adjustable rotating speed Remote controller with 5 meter cable length Digital speed indicator on the controller panel for monitoring rotation Welding – chassis mechanism Mechanical angle indicator (for tilting movement) Motors with brake & forced fan cooling
            table diameter 1525 mm
            table load 5,0 t
            swivelling range 135° deg.
            table rotating 360° deg.
            table turning speeds 0,05 - 1 U/min
            table drive 1,5 kW
            weight of the machine ca. 2,6 t
            dimensions of the machine ca. 1,80 x 1,54 x 1,20 m
            Description :
            Adjustable rotating speed
            Remote controller with 5 meter cable length
            Digital speed indicator on the controller panel for monitoring rotation
            Welding – chassis mechanism
            Mechanical angle indicator (for tilting movement)
            Motors with brake & forced fan cooling


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Rotary Welding Table - Round Surface AKYAPAK SRH - 7000


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05044 · Rotary Welding Table - Round Surface

          AKYAPAK - SRH - 7000 - - Neu / New -

          Technical details
          table diameter 1300 mm︱table load 7,0 t︱swivelling range 0 - 110° deg.︱table rotating 360° deg.︱table turning speeds 0,1 - 0,9 U/min︱height adjustment 1040 - 1740 mm︱table drive 2,2 kW︱hydraulic motor 2,2 kW︱total power requirement kW︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. 2,80 x 1,55 m︱
          Hydraulic welding rotating and tilting table. - Adjustable speed - Remote control with a cable length of 5 meters - Digital speed display on the control panel for monitoring the rotation - Motors with brakes - Mechanical angle display (for tilting)
            table diameter 1300 mm
            table load 7,0 t
            swivelling range 0 - 110° deg.
            table rotating 360° deg.
            table turning speeds 0,1 - 0,9 U/min
            height adjustment 1040 - 1740 mm
            table drive 2,2 kW
            hydraulic motor 2,2 kW
            weight of the machine ca. 3,5 t
            dimensions of the machine ca. 2,80 x 1,55 m
            Description :
            Hydraulic welding rotating and tilting table.

            - Adjustable speed
            - Remote control with a cable length of 5 meters
            - Digital speed display on the control panel for monitoring the rotation
            - Motors with brakes
            - Mechanical angle display (for tilting)


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Rotary Welding Table - Round Surface AKYAPAK SRH - 3500


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05041 · Rotary Welding Table - Round Surface

          AKYAPAK - SRH - 3500 - - Neu / New -

          Technical details
          table diameter 960 mm︱table load 3,5 t︱swivelling range 0 - 110° deg.︱table rotating 360° deg.︱table turning speeds 0,1 - 0,9 U/min︱height adjustment 1070 - 1800 mm︱table drive 1,5 kW︱hydraulic motor 1,5 kW︱total power requirement kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 2,35 x 1,35 x 1,80 m︱
          Hydraulic Welding Positioner - Adjustable rotating speed - Remote controller with 5 meter cable length - Digital speed indicator on the controller panel for monitoring rotation - Mechanical angle indicator (for tilting)
            table diameter 960 mm
            table load 3,5 t
            swivelling range 0 - 110° deg.
            table rotating 360° deg.
            table turning speeds 0,1 - 0,9 U/min
            height adjustment 1070 - 1800 mm
            table drive 1,5 kW
            hydraulic motor 1,5 kW
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 2,35 x 1,35 x 1,80 m
            Description :
            Hydraulic Welding Positioner

            - Adjustable rotating speed
            - Remote controller with 5 meter cable length
            - Digital speed indicator on the controller panel for monitoring rotation
            - Mechanical angle indicator (for tilting)


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact

          Mangle

          used Machines available immediately Mangle KUESTERS,KREFELD 222.65 / 1800


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-009489 · Mangle

          KUESTERS,KREFELD - 222.65 / 1800 - - 1987 -

          Technical details
          Working widths 1800 mm︱Roller width 2000 mm︱Number of rollers 2 Stück︱Supporting roller - dia 270 mm︱Roller covering - soft rubber 93 Grad shore︱Pressure roll - dia 220 mm︱Roller covering - ebonit 100 Grad shore︱Pressure line 50 N / mm︱total pressure 10 to︱Drive side rechts ︱Operting side rechts ︱Drive shaft 80 mm Durchmesser ︱turning speeds 11,8 Umdr. bei 10m/min
          • Fitting-squeezer, type 222.65, • Special version without S-Roll, • without hydraulic,
            Working widths 1800 mm
            Roller width 2000 mm
            Number of rollers 2 Stück
            Supporting roller - dia 270 mm
            Roller covering - soft rubber 93 Grad shore
            Pressure roll - dia 220 mm
            Roller covering - ebonit 100 Grad shore
            Pressure line 50 N / mm
            total pressure 10 to
            Drive side rechts
            Operting side rechts
            Drive shaft 80 mm Durchmesser
            turning speeds 11,8 Umdr. bei 10m/min
            Description :
            • Fitting-squeezer, type 222.65,
            • Special version without S-Roll,
            • without hydraulic,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact

          Squeezing Mangle

          used Machines available immediately Squeezing Mangle KUESTERS,KREFELD 222.65 / 2000


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-007196 · Squeezing Mangle

          KUESTERS,KREFELD - 222.65 / 2000 - - überholt -

          Technical details
          Working widths 2000 mm︱Roller width 2200 mm︱Number of rollers 2 Stück︱Supporting roller - dia 270 mm︱Roller covering - soft rubber 93 Grad shore︱Swimming roll - dia 190 mm︱Roller covering - ebonit 100 Grad shore︱Pressure line 50 N / mm︱total pressure 11 ︱Drive side Links ︱Operting side rechts ︱Drive shaft 80 mm Durchmesser ︱Hydraulic unit for combined pressure mit separatem Ölteil
          • assembled squeezer, type 222.65, • Machine will be completely overhauled when delivered, • We grant a guarantee, • without drive,
            Working widths 2000 mm
            Roller width 2200 mm
            Number of rollers 2 Stück
            Supporting roller - dia 270 mm
            Roller covering - soft rubber 93 Grad shore
            Swimming roll - dia 190 mm
            Roller covering - ebonit 100 Grad shore
            Pressure line 50 N / mm
            total pressure 11
            Drive side Links
            Operting side rechts
            Drive shaft 80 mm Durchmesser
            Hydraulic unit for combined pres. mit separatem Ölteil
            Description :
            • assembled squeezer, type 222.65,
            • Machine will be completely overhauled when delivered,
            • We grant a guarantee,
            • without drive,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact

          Dye Padder

          used Machines available immediately Dye Padder KUESTERS,KREFELD 222.11 / 2000


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-007271 · Dye Padder

          KUESTERS,KREFELD - 222.11 / 2000 - - Überholt -

          Technical details
          Working widths 2000 mm︱Roller width 2200 mm︱Number of rollers 2 x S-Walze Stück︱Swimming roll - dia 220 mm︱Roller covering - soft rubber 75 Grad shore︱Pressure line 50 N / mm︱Pressure total 10 to︱liquor trough withunder-liquor squeezing 4 Walzen ︱Capacity of dye tub ca. 48 Liter︱Cloth guiding system for woven goods geb. Breithalter vor Fuge ︱Drive for ohne Antrieb m/min︱Drive without drive,sep.offer
          • Dyeing-padder with 2 swimming rolls with a large basin and under liquor squeezer for CPB-dyeing, • Machine will be completely overhauled before delivery, we supply with warranty, • without drive, adapted frequency drive deliverable
            Working widths 2000 mm
            Roller width 2200 mm
            Number of rollers 2 x S-Walze Stück
            Swimming roll - dia 220 mm
            Roller covering - soft rubber 75 Grad shore
            Pressure line 50 N / mm
            Pressure total 10 to
            liquor trough withunder-liquor s. 4 Walzen
            Capacity of dye tub ca. 48 Liter
            Cloth guiding system for woven g. geb. Breithalter vor Fuge
            Drive for ohne Antrieb m/min
            Drive without drive,sep.offer
            Description :
            • Dyeing-padder with 2 swimming rolls with a large basin and under liquor squeezer for CPB-dyeing,
            • Machine will be completely overhauled before delivery, we supply with warranty,
            • without drive, adapted frequency drive deliverable


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact

          Finishing Mangle

          used Machines available immediately Finishing Mangle KUESTERS,KREFELD 222.53 / 2400


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-009382 · Finishing Mangle

          KUESTERS,KREFELD - 222.53 / 2400 - - überholt -

          Technical details
          Working width 2400 mm︱Roller width 2600 mm︱Number of rollers 2 Stück︱Supporting roller - dia 295 mm︱Roller covering - soft rubber 75 Grad shore︱Swimming roll - dia 220 mm︱Roller covering - ebonit 100 Grad shore︱Pressure line 50 N / mm︱Pressure total 13 to︱Cloth guiding system for woven fabrics Breithalter, Leitwalze ︱Drive side nach Auftrag ︱Operting side nach Auftrag ︱Drive shaft dia 80 mm ︱Hydraulic unit for combined pressure
          • 2-Bowl-High efficiency squeezer with one "Swimming Roll" (S-roll), Machine will be completely overhauled before delivery, we supply with warranty. (Photo shows a similar machines in delivered condition). without drive,
            Working width 2400 mm
            Roller width 2600 mm
            Number of rollers 2 Stück
            Supporting roller - dia 295 mm
            Roller covering - soft rubber 75 Grad shore
            Swimming roll - dia 220 mm
            Roller covering - ebonit 100 Grad shore
            Pressure line 50 N / mm
            Pressure total 13 to
            Cloth guiding system for woven f. Breithalter, Leitwalze
            Drive side nach Auftrag
            Operting side nach Auftrag
            Drive shaft dia 80 mm
            Description :
            • 2-Bowl-High efficiency squeezer with one "Swimming Roll" (S-roll),
            Machine will be completely overhauled before delivery, we supply with warranty.
            (Photo shows a similar machines in delivered condition).
            without drive,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Finishing Mangle KUESTERS,KREFELD 222.53 / 2400


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-007162 · Finishing Mangle

          KUESTERS,KREFELD - 222.53 / 2400 - - überholt -

          Technical details
          Working width 2400 mm︱Roller width 2600 mm︱Number of rollers 2 Stück︱Supporting roller - dia 295 mm︱Roller covering - soft rubber 75 Grad shore︱Swimming roll - dia 220 mm︱Roller covering - ebonit 100 Grad shore︱Pressure line 50 N / mm︱Pressure total 13 to︱Clouth guiding system for knitted fabrics 2 Profilbreithalter ︱Drive side nach Auftrag ︱Operting side nach Auftrag ︱Hydraulic unit for combined pressure ︱Liquor trough with displacer ︱Drive shaft dia 80 mm
          2-roll finishing padder for treatment of woven and knitted fabrics. Machine is completely overhauled before delivery, we supply with warranty. (Photo shows a similar machines in delivered condition). without electrical drive system,
            Working width 2400 mm
            Roller width 2600 mm
            Number of rollers 2 Stück
            Supporting roller - dia 295 mm
            Roller covering - soft rubber 75 Grad shore
            Swimming roll - dia 220 mm
            Roller covering - ebonit 100 Grad shore
            Pressure line 50 N / mm
            Pressure total 13 to
            Clouth guiding system for knitte. 2 Profilbreithalter
            Drive side nach Auftrag
            Operting side nach Auftrag
            Drive shaft dia 80 mm
            Description :
            2-roll finishing padder for treatment of woven and knitted fabrics.
            Machine is completely overhauled before delivery, we supply with warranty.
            (Photo shows a similar machines in delivered condition).
            without electrical drive system,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Finishing Mangle KUESTERS,KREFELD 222.53 / 2400


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-007336 · Finishing Mangle

          KUESTERS,KREFELD - 222.53 / 2400 - - überholt -

          Technical details
          Working width 2400 mm︱Roller width 2600 mm︱Number of rollers 2 Stück︱Supporting roller - dia 295 mm︱Roller covering - soft rubber 75 Grad shore︱Swimming roll - dia 240 mm︱Roller covering - soft rubber 75 Grad shore︱Pressure line 50 N / mm︱Pressure total 13 to︱Cloth guiding system for woven fabrics ︱Drive side nach Auftrag ︱Operting side nach Auftrag ︱Hydraulic unit for combined pressure ︱Liquor trough with displacer ︱Drive shaft dia 80 mm
          2-roll finishing padder for treatment of woven fabrics. Machine is completely overhauled before delivery, we supply with warranty. (Photo shows a similar machines in delivered condition). without electrical drive system,
            Working width 2400 mm
            Roller width 2600 mm
            Number of rollers 2 Stück
            Supporting roller - dia 295 mm
            Roller covering - soft rubber 75 Grad shore
            Swimming roll - dia 240 mm
            Roller covering - soft rubber 75 Grad shore
            Pressure line 50 N / mm
            Pressure total 13 to
            Drive side nach Auftrag
            Operting side nach Auftrag
            Drive shaft dia 80 mm
            Description :
            2-roll finishing padder for treatment of woven fabrics.
            Machine is completely overhauled before delivery, we supply with warranty.
            (Photo shows a similar machines in delivered condition).
            without electrical drive system,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Finishing Mangle KUESTERS,KREFELD 222.53 / 2400


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-009470 · Finishing Mangle

          KUESTERS,KREFELD - 222.53 / 2400 - - 1970 -

          Technical details
          Working width 2400 mm︱Roller width 2600 mm︱Number of rollers 2 Stück︱Supporting roller - dia 295 mm︱Roller covering - soft rubber 75 Grad shore︱Swimming roll - dia 220 mm︱Roller covering - ebonit 100 Grad shore︱Pressure line 50 N / mm︱Pressure total 13 to︱Cloth guiding system for woven fabrics Breithalter, Leitwalze ︱Drive side nach Auftrag ︱Operting side nach Auftrag ︱Drive shaft dia 80 mm ︱Hydraulic unit for combined pressure
          • 2-Bowl-High efficiency squeezer with one "Swimming Roll" (S-roll), Machine will be completely overhauled before delivery, we supply with warranty. (Photo shows a similar machines in delivered condition). without drive,
            Working width 2400 mm
            Roller width 2600 mm
            Number of rollers 2 Stück
            Supporting roller - dia 295 mm
            Roller covering - soft rubber 75 Grad shore
            Swimming roll - dia 220 mm
            Roller covering - ebonit 100 Grad shore
            Pressure line 50 N / mm
            Pressure total 13 to
            Cloth guiding system for woven f. Breithalter, Leitwalze
            Drive side nach Auftrag
            Operting side nach Auftrag
            Drive shaft dia 80 mm
            Description :
            • 2-Bowl-High efficiency squeezer with one "Swimming Roll" (S-roll),
            Machine will be completely overhauled before delivery, we supply with warranty.
            (Photo shows a similar machines in delivered condition).
            without drive,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact

          Liquor application

          used Machines available immediately Liquor application KUESTERS,KREFELD 272.11 - FlexNip


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-009046 · Liquor application

          KUESTERS,KREFELD - 272.11 - FlexNip - - 1998 - unbenutzt -

          Technical details
          Working widths 300 mm︱roll surface width 400 mm︱Capacity of dye tub Liter︱peripheral speed m/sec︱
          • Laboratory-liquor application device for regularly liquor application across the whole fabric width, • fast renewal of bath with an extremely small contents, • particular advantage: liquor separation of dyestuff and auxiliaries, • decreased load of waste-water
            Working widths 300 mm
            roll surface width 400 mm
            Description :
            • Laboratory-liquor application device for regularly liquor application across the whole fabric width,
            • fast renewal of bath with an extremely small contents,
            • particular advantage: liquor separation of dyestuff and auxiliaries,
            • decreased load of waste-water


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Liquor application KUESTERS,KREFELD 272.11 - FlexNip


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-009469 · Liquor application

          KUESTERS,KREFELD - 272.11 - FlexNip - - 1988 - unbenutzt -

          Technical details
          Working widths 3200 mm︱roll surface width 3400 mm︱Capacity of dye tub Flottenhöhe 220mm = 16 Liter︱
          • Liquor application device for regularly liquor application across the whole fabric width, • fast renewal of bath with an extremely small contents, • particular advantage: liquor separation of dyestuff and auxiliaries, • decreased load of waste-water,
            Working widths 3200 mm
            roll surface width 3400 mm
            Capacity of dye tub Flottenhöhe 220mm = 16 Liter
            Description :
            • Liquor application device for regularly liquor application across the whole fabric width,
            • fast renewal of bath with an extremely small contents,
            • particular advantage: liquor separation of dyestuff and auxiliaries,
            • decreased load of waste-water,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Liquor application KUESTERS,KREFELD 271.49 / 1600


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-009041 · Liquor application

          KUESTERS,KREFELD - 271.49 / 1600 - - 1985 -

          Technical details
          Working widths 1600 mm︱roll surface width 2000 mm︱Capacity of dye tub Liter︱
          • Liquor application device for double-sided minimum-application of foamed liquor, Foam feed takes place via a rotating liquor distributor with iridescent Flex hoses. • Statical double-foam mixer, made by CONTIMIX with 2 NETZSCH-Mohno-pumps with a delivery rate of 30 -300 l/h + 60 -600 l/h.
            Working widths 1600 mm
            roll surface width 2000 mm
            Description :
            • Liquor application device for double-sided minimum-application of foamed
            liquor,
            Foam feed takes place via a rotating liquor distributor with iridescent Flex
            hoses.
            • Statical double-foam mixer, made by CONTIMIX with 2 NETZSCH-Mohno-pumps with
            a delivery rate of 30 -300 l/h + 60 -600 l/h.


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer: